GlobalExceptionHandler


#1

SGP crashed.
The crash was not handled.
The monitoring system (Good Night System) did not alert me of the crash.
SGP performed 62 events successfully prior to the crash.

Nikon D5200

sg_logfile_20160330194333.zip (68.6 KB)

LOG (partial):
[3/30/2016 7:43:37 PM] [DEBUG] [Main Thread] ===== S E Q U E N C E G E N E R A T O R (v2.5.0.23) =====
[3/30/2016 7:43:37 PM] [DEBUG] [Main Thread] OS: Microsoft Windows 7

[3/31/2016 12:17:24 AM] [DEBUG] [Sequence Thread] TEMP - Current Event15: 0
[3/31/2016 12:17:24 AM] [DEBUG] [Sequence Thread] Waking from exposure time sleep period…
[3/31/2016 12:17:24 AM] [DEBUG] [Sequence Thread] Checking to see if the CCD has a temp…
[3/31/2016 12:17:24 AM] [DEBUG] [Sequence Thread] Saving the CCD temp…
[3/31/2016 12:17:24 AM] [DEBUG] [Sequence Thread] Entering super dangerous loop to await image completion…
[3/31/2016 12:17:24 AM] [DEBUG] [Sequence Thread] TEMP - Current Event16: 0
[3/31/2016 12:17:24 AM] [DEBUG] [Camera Thread] Nikon: Timer complete, closing shutter with USB
[3/31/2016 12:17:25 AM] [DEBUG] [Camera Thread] Nikon: Shutter closed with USB
[3/31/2016 12:17:27 AM] [DEBUG] [Camera Thread] Nikon: Image captured successfully.
[3/31/2016 12:17:27 AM] [DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE complete…
[3/31/2016 12:17:28 AM] [DEBUG] [Sequence Thread] TEMP - Current Event17: 0
[3/31/2016 12:17:28 AM] [DEBUG] [Sequence Thread] Image reported as complete. Continuing…
[3/31/2016 12:17:28 AM] [DEBUG] [Sequence Thread] Collecting FITs headers…
[3/31/2016 12:17:28 AM] [DEBUG] [Sequence Thread] DATE-LOC time provided by SGPro (failed to retrieve valid entry camera)…
[3/31/2016 12:17:28 AM] [DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info from UI…
[3/31/2016 12:17:28 AM] [DEBUG] [Sequence Thread] Clearing timed monitoring events…
[3/31/2016 12:17:28 AM] [DEBUG] [Sequence Thread] Created full file name (file does not exist): D:\Astronomy\M81_b\Light\M81_120sec_1x1__frame62.fit
[3/31/2016 12:17:28 AM] [DEBUG] [Sequence Thread] Extracting RAW data…
[3/31/2016 12:17:34 AM] [DEBUG] [Sequence Thread] Done extracting RAW data, checking for success…
[3/31/2016 12:17:34 AM] [DEBUG] [Sequence Thread] RAW data extraction is good…
[3/31/2016 12:17:34 AM] [DEBUG] [Sequence Thread] Extracting bitmap data from RAW (tiff)…
[3/31/2016 12:17:35 AM] [DEBUG] [Sequence Thread] Creating bitmap (6036,4020)…
[3/31/2016 12:17:35 AM] [DEBUG] [Sequence Thread] Locking bitmap for write
[3/31/2016 12:17:35 AM] [DEBUG] [Sequence Thread] RAW bith depth: 16
[3/31/2016 12:17:36 AM] [DEBUG] [Sequence Thread] Internal Interface: Set Preview…
[3/31/2016 12:17:36 AM] [DEBUG] [Sequence Thread] Display image preview using asynch task…
[3/31/2016 12:17:39 AM] [DEBUG] [Sequence Thread] ----> Nikon IO time: 10965 ms
[3/31/2016 12:17:39 AM] [DEBUG] [Sequence Thread] TEMP - Current Event18: 0
[3/31/2016 12:17:39 AM] [DEBUG] [Sequence Thread] TEMP - Current Event19: 0
[3/31/2016 12:17:39 AM] [DEBUG] [Sequence Thread] TEMP - Current Event20: 0
[3/31/2016 12:17:39 AM] [DEBUG] [Sequence Thread] TEMP - Current Event21: 0
[3/31/2016 12:17:39 AM] [DEBUG] [Sequence Thread] Incremented numComplete (62) for event[0]…
[3/31/2016 12:17:39 AM] [DEBUG] [Sequence Thread] Attempting to find next event…
[3/31/2016 12:17:39 AM] [DEBUG] [Sequence Thread] Current event[0] frame count: 62/999…
[3/31/2016 12:17:39 AM] [DEBUG] [Sequence Thread] Looking at event[1]…
[3/31/2016 12:17:39 AM] [DEBUG] [Sequence Thread] Looking at event[2]…
[3/31/2016 12:17:39 AM] [DEBUG] [Sequence Thread] Looking at event[3]…
[3/31/2016 12:17:39 AM] [DEBUG] [Sequence Thread] Looking at event[4]…
[3/31/2016 12:17:39 AM] [DEBUG] [Sequence Thread] Looking at event[0]…
[3/31/2016 12:17:39 AM] [DEBUG] [Sequence Thread] Found event event[0] with remaining frames.
[3/31/2016 12:17:39 AM] [DEBUG] [Sequence Thread] Event[0] frame count: 62/999…
[3/31/2016 12:17:39 AM] [DEBUG] [Sequence Thread] Getting next event (0)…
[3/31/2016 12:17:39 AM] [DEBUG] [Sequence Thread] Checking for auto manual focus (post)…
[3/31/2016 12:17:39 AM] [DEBUG] [Main Thread] PopulateDataModel: Transferring view to the data model…
[3/31/2016 12:17:39 AM] [DEBUG] [Sequence Thread] Attempting to move to next event…
[3/31/2016 12:17:39 AM] [DEBUG] [Sequence Thread] Attempting to find next event…
[3/31/2016 12:17:39 AM] [DEBUG] [Sequence Thread] Current event[0] frame count: 62/999…
[3/31/2016 12:17:39 AM] [DEBUG] [Sequence Thread] Looking at event[1]…
[3/31/2016 12:17:39 AM] [DEBUG] [Sequence Thread] Looking at event[2]…
[3/31/2016 12:17:39 AM] [DEBUG] [Sequence Thread] Looking at event[3]…
[3/31/2016 12:17:39 AM] [DEBUG] [Sequence Thread] Looking at event[4]…
[3/31/2016 12:17:39 AM] [DEBUG] [Sequence Thread] Looking at event[0]…
[3/31/2016 12:17:39 AM] [DEBUG] [Sequence Thread] Found event event[0] with remaining frames.
[3/31/2016 12:17:39 AM] [DEBUG] [Sequence Thread] Event[0] frame count: 62/999…
[3/31/2016 12:17:39 AM] [DEBUG] [Sequence Thread] Getting next event (0)…
[3/31/2016 12:17:39 AM] [DEBUG] [Sequence Thread] Current target has end time at 3/31/2016 3:30:00 AM
[3/31/2016 12:17:39 AM] [DEBUG] [Sequence Thread] End time of next frame is at 3/31/2016 12:19:39 AM
[3/31/2016 12:17:39 AM] [DEBUG] [Sequence Thread] Target is still before end time, continuing…
[3/31/2016 12:17:39 AM] [DEBUG] [Sequence Thread] Sequence has end time at 3/31/2016 3:35:00 AM
[3/31/2016 12:17:39 AM] [DEBUG] [Sequence Thread] Running capture event…
[3/31/2016 12:17:39 AM] [DEBUG] [Sequence Thread] ------------- Starting capture frame for event[0] -------------
[3/31/2016 12:17:39 AM] [DEBUG] [Sequence Thread] Sending commands…
[3/31/2016 12:17:39 AM] [DEBUG] [Sequence Thread] SetFlatBox: Frame Type is Light
[3/31/2016 12:17:39 AM] [DEBUG] [Sequence Thread] TEMP - Current Event2: 0
[3/31/2016 12:17:39 AM] [DEBUG] [Sequence Thread] TEMP - Current Event3: 0
[3/31/2016 12:17:39 AM] [DEBUG] [Sequence Thread] TEMP - Current Event4: 0
[3/31/2016 12:17:39 AM] [DEBUG] [Sequence Thread] TEMP - Current Event5: 0
[3/31/2016 12:17:39 AM] [DEBUG] [Sequence Thread] Checking for auto manual focus (pre)…
[3/31/2016 12:17:39 AM] [DEBUG] [Sequence Thread] TEMP - Current Event6: 0
[3/31/2016 12:17:39 AM] [DEBUG] [Sequence Thread] Created base name for frame capture: M81_120sec_1x1__frame63
[3/31/2016 12:17:39 AM] [DEBUG] [Sequence Thread] Created directory for frame capture: D:\Astronomy\M81_b\Light
[3/31/2016 12:17:39 AM] [DEBUG] [Sequence Thread] TEMP - Current Event1: 0
[3/31/2016 12:17:39 AM] [DEBUG] [Sequence Thread] TEMP - Current Event7: 0
[3/31/2016 12:17:39 AM] [DEBUG] [Sequence Thread] TEMP - Current Event8: 0
[3/31/2016 12:17:39 AM] [DEBUG] [Sequence Thread] TEMP - Current Event9: 0
[3/31/2016 12:17:39 AM] [DEBUG] [Sequence Thread] TEMP - Current Event10: 0
[3/31/2016 12:17:39 AM] [DEBUG] [Sequence Thread] Finished sending frame capture. Entering wait mode…
[3/31/2016 12:17:39 AM] [DEBUG] [Sequence Thread] TEMP - Current Event11: 0
[3/31/2016 12:17:39 AM] [DEBUG] [Sequence Thread] TEMP - Current Event12: 0
[3/31/2016 12:17:39 AM] [DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE message received…
[3/31/2016 12:17:39 AM] [DEBUG] [Camera Thread] Setting sensitivity
[3/31/2016 12:17:39 AM] [DEBUG] [Camera Thread] Nikon: Setting output to RAW
[3/31/2016 12:17:39 AM] [DEBUG] [Camera Thread] Nikon: Exposure using bulb mode…
[3/31/2016 12:17:39 AM] [DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, TimedError): (M81) Failure while integrating M81; Event 1; Frame 63 for 120s. Image has not downloaded in alloted time period.
[3/31/2016 12:17:39 AM] [DEBUG] [Sequence Thread] GNS: Sent timed event to GNS…
[3/31/2016 12:17:39 AM] [DEBUG] [Sequence Thread] Handling monitoring event (Email 1, TimedError): (M81) Failure while integrating M81; Event 1; Frame 63 for 120s. Image has not downloaded in alloted time period.
[3/31/2016 12:17:39 AM] [DEBUG] [Sequence Thread] TEMP - Current Event13: 0
[3/31/2016 12:17:39 AM] [DEBUG] [Camera Thread] Caught exception in USB Bulb capture: [kNkMAIDResult_BatteryDontWork] (kNkMAIDCommand_CapStart, 17, kNkMAIDDataType_Null, 0)
[3/31/2016 12:18:46 AM] [DEBUG] [Main Thread] PopulateDataModel: Transferring view to the data model…
[3/31/2016 12:18:46 AM] [DEBUG] [MF Update Thread] Performing serialize…
[3/31/2016 12:19:39 AM] [DEBUG] [Sequence Thread] TEMP - Current Event15: 0
[3/31/2016 12:19:39 AM] [DEBUG] [Sequence Thread] Waking from exposure time sleep period…
[3/31/2016 12:19:39 AM] [DEBUG] [Sequence Thread] Checking to see if the CCD has a temp…
[3/31/2016 12:19:39 AM] [DEBUG] [Sequence Thread] Saving the CCD temp…
[3/31/2016 12:19:39 AM] [DEBUG] [Sequence Thread] Entering super dangerous loop to await image completion…
[3/31/2016 12:19:39 AM] [DEBUG] [Sequence Thread] TEMP - Current Event16: 0
[3/31/2016 12:22:39 AM] [DEBUG] [Monitoring System Timed Message Thread] Adding sequence level notification: (M81) Failure while integrating M81; Event 1; Frame 63 for 120s. Image has not downloaded in alloted time period.
[3/31/2016 12:27:39 AM] [DEBUG] [Sequence Thread] Adding sequence level notification: Camera timeout! No image was downloaded.
[3/31/2016 12:27:39 AM] [DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Warning): (M81) Camera timeout! No image was downloaded.
[3/31/2016 12:27:39 AM] [DEBUG] [Sequence Thread] GNS: Sent warning message to GNS ((M81) Camera timeout! No image was downloaded.)…
[3/31/2016 12:27:39 AM] [DEBUG] [Sequence Thread] Handling monitoring event (Email 1, Warning): (M81) Camera timeout! No image was downloaded.
[3/31/2016 12:27:39 AM] [DEBUG] [Sequence Thread] TEMP - Current Event17: 0
[3/31/2016 12:27:39 AM] [DEBUG] [Sequence Thread] Image reported as complete. Continuing…
[3/31/2016 12:27:39 AM] [DEBUG] [Sequence Thread] Collecting FITs headers…
[3/31/2016 12:27:39 AM] [DEBUG] [Sequence Thread] DATE-LOC time provided by SGPro (failed to retrieve valid entry camera)…
[3/31/2016 12:27:39 AM] [DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info from UI…
[3/31/2016 12:27:39 AM] [DEBUG] [Sequence Thread] Clearing timed monitoring events…
[3/31/2016 12:27:39 AM] [DEBUG] [Sequence Thread] TEMP - Current Event18: 0
[3/31/2016 12:27:39 AM] [DEBUG] [Sequence Thread] TEMP - Current Event19: 0
[3/31/2016 12:27:39 AM] [DEBUG] [Sequence Thread] Run event reported timeout…
[3/31/2016 12:27:39 AM] [DEBUG] [Sequence Thread] Adding sequence level notification: Camera timeout! Sequence has been aborted.
[3/31/2016 12:27:39 AM] [DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Error): (M81) Camera timeout! Sequence has been aborted.
[3/31/2016 12:27:39 AM] [DEBUG] [Sequence Thread] GNS: Sent error message to GNS ((M81) Camera timeout! Sequence has been aborted.)…
[3/31/2016 12:27:39 AM] [DEBUG] [Sequence Thread] Handling monitoring event (Email 1, Error): (M81) Camera timeout! Sequence has been aborted.
[3/31/2016 12:27:45 AM] [DEBUG] [Sequence Thread] Clearing timed monitoring events…
[3/31/2016 12:27:45 AM] [DEBUG] [Sequence Thread] Checking RunEndOfSequenceEquipmentOptions, force = True
[3/31/2016 12:27:45 AM] [DEBUG] [Sequence Thread] In RunEndOfSequenceEquipmentOptions
[3/31/2016 12:28:17 AM] [DEBUG] [Main Thread] Aborting sequence timer thread…
[3/31/2016 12:28:17 AM] [DEBUG] [Main Thread] Sending sequence end notification…
[3/31/2016 12:28:17 AM] [DEBUG] [Main Thread] Resetting UI elements…
[3/31/2016 12:28:17 AM] [DEBUG] [Main Thread] Checking if sequence has work left…
[3/31/2016 12:28:17 AM] [DEBUG] [Main Thread] Work left…
[3/31/2016 12:28:17 AM] [DEBUG] [Main Thread] Updating big status…
[3/31/2016 12:28:17 AM] [DEBUG] [Main Thread] Enabling menu items…
[3/31/2016 12:28:18 AM] [DEBUG] [Main Thread] Set target icons…
[3/31/2016 12:28:18 AM] [DEBUG] [Main Thread] Removing camera protection…
[3/31/2016 12:28:18 AM] [DEBUG] [Main Thread] Monitoring system shutdown…
[3/31/2016 12:28:18 AM] [DEBUG] [Main Thread] SequenceEnds complete…
[3/31/2016 12:28:18 AM] [DEBUG] [Sequence Thread] Restoring system standby state…
[3/31/2016 12:41:20 AM] [DEBUG] [Camera Thread] GlobalExceptionHandler caught : [kNkMAIDResult_ValueOutOfBounds] (kNkMAIDCommand_CapGet, 33342, kNkMAIDDataType_UnsignedPtr, 338226612)
[3/31/2016 12:41:20 AM] [DEBUG] [Camera Thread] Runtime terminating: True


#2

Please do not include partial logs.

See here for more guidance:


#3

Complete log file uploaded to original post.


#4

Thanks we will take a look shortly.


www.mainsequencesoftware.com