I’ve installed local solver and the config page loads fine. However when I try to blind solve it fails. After the fail, the config page doesn’t seem to load. Have to restart the server.
Trying to solve same image using astrometry.net solves fine in about 90secs.
Any tips?
Log watch output below
[2019-07-28 00:15:32] send continue
[2019-07-28 00:15:32] POST /api/upload/ HTTP/1.1
[2019-07-28 00:15:32] send continue
[2019-07-28 00:15:32] request_json is: {“session”:“3”,“allow_commercial_use”:“d”,“allow_modifications”:“d”,“publicly_visible”:“y”,“scale_units”:“arcsecperpix”,“scale_type”:“ev”,“scale_est”:11.996094619843284,“scale_err”:100.0}
[2019-07-28 00:15:32] UPLOAD: session is 3
[2019-07-28 00:15:32] upload type is: FITS
[2019-07-28 00:15:34] POST /api/submissions/3 HTTP/1.1
[2019-07-28 00:15:33] forcing scale_err to 5 (was 100)
scale_args: -u arcsecperpix -L 11.3962898888511 -H 12.5958993508354
UPLOAD: /opt/ansvr/run_solver 480 /usr/bin/solve-field -p -O -U none -B none -R none -M none -N none -C cancel --crpix-center -z 2 -u arcsecperpix -L 11.3962898888511 -H 12.5958993508354 stars.fit
Using timeout = 480
exec /usr/bin/solve-field -p -O -U none -B none -R none -M none -N none -C cancel --crpix-center -z 2 -u arcsecperpix -L 11.3962898888511 -H 12.5958993508354 stars.fit
[2019-07-28 00:15:34] SUBS: solve is not done yet
[2019-07-28 00:15:34] SUBS: jstr: {“jobs”:,“user”:“0”,“processing_finished”:“0”,“processing_started”:“1”,“user_images”:}
[2019-07-28 00:15:35] POST /api/submissions/3 HTTP/1.1
Reading input file 1 of 1: “stars.fit”…
[2019-07-28 00:15:35] SUBS: solve is not done yet
[2019-07-28 00:15:35] SUBS: jstr: {“jobs”:,“user”:“0”,“processing_finished”:“0”,“processing_started”:“1”,“user_images”:}
[2019-07-28 00:15:36] POST /api/submissions/3 HTTP/1.1
[2019-07-28 00:15:36] SUBS: solve is not done yet
[2019-07-28 00:15:36] SUBS: jstr: {“user”:“0”,“jobs”:,“user_images”:,“processing_finished”:“0”,“processing_started”:“1”}
[2019-07-28 00:15:37] POST /api/submissions/3 HTTP/1.1
3 [main] python2.7 4632 child_info_fork::abort: unable to remap _functools.dll to same address as parent (0x6D0000) - try running rebaseall
Traceback (most recent call last):
File “/usr/lib/astrometry/bin/image2pnm.py”, line 328, in
sys.exit(main())
File “/usr/lib/astrometry/bin/image2pnm.py”, line 325, in main
mydir, fix_sdss=options.fix_sdss)
File “/usr/lib/astrometry/bin/image2pnm.py”, line 246, in convert_image
comp = uncompress_file(infile, uncompressed)
File “/usr/lib/astrometry/bin/image2pnm.py”, line 96, in uncompress_file
typeinfo = filetype_short(infile)
File “/usr/lib/astrometry/python/astrometry/util/filetype.py”, line 42, in filetype_short
ft = filetype(fn)
File “/usr/lib/astrometry/python/astrometry/util/filetype.py”, line 20, in filetype
(rtn,out,err) = run_command(cmd)
File “/usr/lib/astrometry/python/astrometry/util/run_command.py”, line 14, in run_command
child = subprocess.Popen(cmd, shell=True, stdin=PIPE, stdout=PIPE, stderr=PIPE, close_fds=True)
File “/usr/lib/python2.7/subprocess.py”, line 390, in init
errread, errwrite)
File “/usr/lib/python2.7/subprocess.py”, line 917, in _execute_child
self.pid = os.fork()
OSError: [Errno 11] Resource temporarily unavailable
augment-xylist.c:585:backtick Failed to run command: /usr/lib/astrometry/bin/image2pnm.py --sanitized-fits-outfile /tmp/tmp.sanitized.ZjYQST --fix-sdss --infile stars.fit --uncompressed-outfile /tmp/tmp.uncompressed.CoSqk9 --outfile /tmp/tmp.ppm.BiGxmA --ppm
ioutils.c:605:run_command_get_outputs Command failed: return value 1
@@@@ FAILED
pid 17256 exiting
[2019-07-28 00:15:37] SUBS: solve done and failed
[2019-07-28 00:15:37] SUBS: solve is done
[2019-07-28 00:15:37] SUBS: jstr: {“jobs”:[3],“user”:“0”,“processing_started”:“1”,“processing_finished”:“1”,“user_images”:}
[2019-07-28 00:15:37] POST /api/jobs/3 HTTP/1.1
[2019-07-28 00:15:37] JOBS: jobid: 3 calibration: ‘’
[2019-07-28 00:15:37] send job status
[2019-07-28 00:15:37] JOBS: jstr: {“status”:“failure”}
[2019-07-28 00:15:37] JOBS: job completed in 5 seconds
[2019-07-28 00:15:33] forcing scale_err to 5 (was 100)
scale_args: -u arcsecperpix -L 11.3962898888511 -H 12.5958993508354
UPLOAD: /opt/ansvr/run_solver 480 /usr/bin/solve-field -p -O -U none -B none -R none -M none -N none -C cancel --crpix-center -z 2 -u arcsecperpix -L 11.3962898888511 -H 12.5958993508354 stars.fit
Using timeout = 480
exec /usr/bin/solve-field -p -O -U none -B none -R none -M none -N none -C cancel --crpix-center -z 2 -u arcsecperpix -L 11.3962898888511 -H 12.5958993508354 stars.fit
Reading input file 1 of 1: “stars.fit”…
3 [main] python2.7 4632 child_info_fork::abort: unable to remap _functools.dll to same address as parent (0x6D0000) - try running rebaseall
Traceback (most recent call last):
File “/usr/lib/astrometry/bin/image2pnm.py”, line 328, in
sys.exit(main())
File “/usr/lib/astrometry/bin/image2pnm.py”, line 325, in main
mydir, fix_sdss=options.fix_sdss)
File “/usr/lib/astrometry/bin/image2pnm.py”, line 246, in convert_image
comp = uncompress_file(infile, uncompressed)
File “/usr/lib/astrometry/bin/image2pnm.py”, line 96, in uncompress_file
typeinfo = filetype_short(infile)
File “/usr/lib/astrometry/python/astrometry/util/filetype.py”, line 42, in filetype_short
ft = filetype(fn)
File “/usr/lib/astrometry/python/astrometry/util/filetype.py”, line 20, in filetype
(rtn,out,err) = run_command(cmd)
File “/usr/lib/astrometry/python/astrometry/util/run_command.py”, line 14, in run_command
child = subprocess.Popen(cmd, shell=True, stdin=PIPE, stdout=PIPE, stderr=PIPE, close_fds=True)
File “/usr/lib/python2.7/subprocess.py”, line 390, in init
errread, errwrite)
File “/usr/lib/python2.7/subprocess.py”, line 917, in _execute_child
self.pid = os.fork()
OSError: [Errno 11] Resource temporarily unavailable
augment-xylist.c:585:backtick Failed to run command: /usr/lib/astrometry/bin/image2pnm.py --sanitized-fits-outfile /tmp/tmp.sanitized.ZjYQST --fix-sdss --infile stars.fit --uncompressed-outfile /tmp/tmp.uncompressed.CoSqk9 --outfile /tmp/tmp.ppm.BiGxmA --ppm
ioutils.c:605:run_command_get_outputs Command failed: return value 1
@@@@ FAILED
pid 17256 exiting
Waiting for data… (interrupt to abort)