Meridian flip failure Plate solve or PHD2 issue?

I tried a meridian flip unattended last night for the first time. It failed.

I cant really see from the part of the log what caused the failure, It looks like PHD2 stopped communicating for some reason. I have had manual failures when the plate solve will not give a close enough result on a flip. I put this down to the mount being unable to get really close to the meridian on flip. My usual plate solves get me to 5 or so pixels. On a meridian flip it can’t seem to get closer than 150 pixels.

Can someone take a look at this section of log and give me some guidence? Many thanks.

[9/5/2016 12:58:03 AM] [DEBUG] [Sequence Thread] ------------- Starting capture frame for event[0] -------------
[9/5/2016 12:58:03 AM] [DEBUG] [Sequence Thread] Sending commands…
[9/5/2016 12:58:03 AM] [DEBUG] [Sequence Thread] SetFlatBox: Frame Type is Light
[9/5/2016 12:58:03 AM] [DEBUG] [Sequence Thread] TEMP - Current Event2: 0
[9/5/2016 12:58:03 AM] [DEBUG] [Sequence Thread] Checking if Meridian Flip is needed
[9/5/2016 12:58:03 AM] [DEBUG] [Sequence Thread] Telescope is on the West side of the mount
[9/5/2016 12:58:03 AM] [DEBUG] [Sequence Thread] Presenting wait for meridian dialog…
[9/5/2016 12:58:57 AM] [DEBUG] [Main Thread] PopulateDataModel: Transferring view to the data model…
[9/5/2016 12:58:57 AM] [DEBUG] [MF Update Thread] Performing serialize…
[9/5/2016 1:01:38 AM] [DEBUG] [Sequence Thread] Meridian Flip needed, Hour Angle >= Degrees Past To Flip: 1.01197688589494 >= 1
[9/5/2016 1:01:38 AM] [DEBUG] [Sequence Thread] Running blocking meridian flip…
[9/5/2016 1:01:38 AM] [DEBUG] [Pier Flip Thread] Meridian Flip: Starting Meridian Flip Procedure
[9/5/2016 1:01:38 AM] [DEBUG] [Pier Flip Thread] Meridian Flip: Calling SGM_TELESCOPE_SOLVE
[9/5/2016 1:01:38 AM] [DEBUG] [Pier Flip Thread] Meridian flip: Waiting for scope solve to complete…
[9/5/2016 1:01:38 AM] [DEBUG] [Telescope Thread] SGM_TELESCOPE_SOLVE message received…
[9/5/2016 1:01:38 AM] [DEBUG] [Telescope Thread] Telescope solve with plate solver PlateSolve2…
[9/5/2016 1:01:38 AM] [DEBUG] [Telescope Thread] Plate solving scope frame…
[9/5/2016 1:01:38 AM] [DEBUG] [Telescope Thread] Created full file name (file does not exist): C:\Users\toshiba\AppData\Local\SequenceGenerator\Temp\plate_solve_image.fit
[9/5/2016 1:01:38 AM] [DEBUG] [Camera Thread] SGM_CAMERA_PLATE_SOLVER_CAPTURE message received…
[9/5/2016 1:01:38 AM] [DEBUG] [Camera Thread] Collecting FITs headers for plate solve frame…
[9/5/2016 1:01:38 AM] [DEBUG] [Camera Thread] Collecting FITs headers for plate solve frame…
[9/5/2016 1:01:38 AM] [DEBUG] [Camera Thread] SetAscomNormalSpeed…
[9/5/2016 1:01:38 AM] [DEBUG] [Camera Thread] Cannot set readout speed, not supported by camera…
[9/5/2016 1:01:41 AM] [DEBUG] [Camera Thread] Created full file name (file does not exist): C:\Users\toshiba\AppData\Local\SequenceGenerator\Temp\plate_solve_image.fit
[9/5/2016 1:01:41 AM] [DEBUG] [Camera Thread] SaveFileAscom: Start…
[9/5/2016 1:01:41 AM] [DEBUG] [Camera Thread] SaveFileAscom: Checking image data…
[9/5/2016 1:01:41 AM] [DEBUG] [Camera Thread] SaveFileAscom: Create normal preview bitmap…
[9/5/2016 1:01:41 AM] [DEBUG] [Camera Thread] SaveFileAscom: Locking preview bits…
[9/5/2016 1:01:41 AM] [DEBUG] [Camera Thread] SaveFileAscom: Validating file name…
[9/5/2016 1:01:41 AM] [DEBUG] [Camera Thread] SaveFileAscom: Starting byte traversal…
[9/5/2016 1:01:41 AM] [DEBUG] [Camera Thread] SaveFileAscom: Unlocking preview bits…
[9/5/2016 1:01:41 AM] [DEBUG] [Camera Thread] SaveFileAscom: Saving preview bitmap to disk…
[9/5/2016 1:01:41 AM] [DEBUG] [Camera Thread] SaveFileBmp16: Locking bitmap for disk write…
[9/5/2016 1:01:41 AM] [DEBUG] [Camera Thread] SaveFileBmp16: Opening file stream…
[9/5/2016 1:01:41 AM] [DEBUG] [Camera Thread] SaveFileBmp16: Writing FITS headers…
[9/5/2016 1:01:41 AM] [DEBUG] [Camera Thread] SaveFileBmp16: Traversing and persisting bitmap data…
[9/5/2016 1:01:41 AM] [DEBUG] [Camera Thread] SaveFileBmp16: FITS block fill…
[9/5/2016 1:01:41 AM] [DEBUG] [Camera Thread] SaveFileBmp16: Unlocking bitmap…
[9/5/2016 1:01:41 AM] [DEBUG] [Camera Thread] SaveFileBmp16: Closing file stream
[9/5/2016 1:01:41 AM] [DEBUG] [Camera Thread] Internal Interface: Set Preview…
[9/5/2016 1:01:41 AM] [DEBUG] [Camera Thread] Display image preview using asynch task…
[9/5/2016 1:01:41 AM] [DEBUG] [Camera Thread] SaveFileAscom: Done
[9/5/2016 1:01:41 AM] [DEBUG] [Camera Thread] =========== Save file took 163 ms
[9/5/2016 1:01:41 AM] [DEBUG] [Camera Thread] SGM_CAMERA_PLATE_SOLVER_CAPTURE complete…
[9/5/2016 1:05:39 AM] [DEBUG] [Telescope Thread] Aborting solver frame. Time out!
[9/5/2016 1:05:39 AM] [DEBUG] [Telescope Thread] Scope solve complete…
[9/5/2016 1:05:39 AM] [DEBUG] [Pier Flip Thread] Meridian flip: Scope solve complete…
[9/5/2016 1:05:39 AM] [DEBUG] [Pier Flip Thread] Meridian Flip: Solve and Sync was Successful
[9/5/2016 1:05:39 AM] [DEBUG] [Pier Flip Thread] Meridian Flip: Stopping the Auto Guider
[9/5/2016 1:05:39 AM] [DEBUG] [Pier Flip Thread] Attempting to stop PHD2 guiding…
[9/5/2016 1:05:39 AM] [DEBUG] [Pier Flip Thread] Checking PHD2 state…
[9/5/2016 1:05:39 AM] [DEBUG] [Pier Flip Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[9/5/2016 1:05:39 AM] [DEBUG] [Pier Flip Thread] Sending to PHD2:
{“method”: “get_app_state”, “id”: 1001}

[9/5/2016 1:05:40 AM] [DEBUG] [Pier Flip Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[9/5/2016 1:05:40 AM] [DEBUG] [Pier Flip Thread] Sending to PHD2:
{“method”: “stop_capture”, “id”: 1004}

[9/5/2016 1:05:40 AM] [DEBUG] [Pier Flip Thread] Checking PHD2 state…
[9/5/2016 1:05:40 AM] [DEBUG] [Pier Flip Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[9/5/2016 1:05:40 AM] [DEBUG] [Pier Flip Thread] Sending to PHD2:
{“method”: “get_app_state”, “id”: 1001}

[9/5/2016 1:05:40 AM] [DEBUG] [Pier Flip Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[9/5/2016 1:05:41 AM] [DEBUG] [Pier Flip Thread] Checking PHD2 state…
[9/5/2016 1:05:41 AM] [DEBUG] [Pier Flip Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[9/5/2016 1:05:41 AM] [DEBUG] [Pier Flip Thread] Sending to PHD2:
{“method”: “get_app_state”, “id”: 1001}

[9/5/2016 1:05:41 AM] [DEBUG] [Pier Flip Thread] PHD2 GetPhdStatus - Post-Wait: Stopped
[9/5/2016 1:05:41 AM] [DEBUG] [Pier Flip Thread] PHD2: Successfully stopeed PHD2…
[9/5/2016 1:05:41 AM] [DEBUG] [Pier Flip Thread] Meridian Flip: Sending Telescope command to execute meridian flip
[9/5/2016 1:05:41 AM] [DEBUG] [Telescope Thread] ASCOM Telescope: Pier side is West
[9/5/2016 1:05:41 AM] [DEBUG] [Telescope Thread] ASCOM Telescope: attempting pier flip using slew
[9/5/2016 1:05:41 AM] [DEBUG] [Telescope Thread] Telescope: Slewing to J2000 RA: 22.9517575448123 (22h57m06.33s) Dec: 62.6396409574468 (62°38’22.71")
[9/5/2016 1:06:41 AM] [DEBUG] [PHD2 Listener Thread] PHD2 - No messages received from PHD2 for 1 minute, checking socket with status…
[9/5/2016 1:06:41 AM] [DEBUG] [PHD2 Listener Thread] Checking PHD2 state…
[9/5/2016 1:06:41 AM] [DEBUG] [PHD2 Listener Thread] PHD2 GetPhdStatus - Pre-Wait : Stopped
[9/5/2016 1:06:41 AM] [DEBUG] [PHD2 Listener Thread] Sending to PHD2:
{“method”: “get_app_state”, “id”: 1001}

[9/5/2016 1:06:41 AM] [DEBUG] [PHD2 Listener Thread] PHD2 GetPhdStatus - Post-Wait: Stopped
[9/5/2016 1:06:51 AM] [DEBUG] [Telescope Thread] Scope reports it is done with synchronous slew, verifying…
[9/5/2016 1:06:51 AM] [DEBUG] [Telescope Thread] Telescope: Slewing has completed
[9/5/2016 1:06:51 AM] [DEBUG] [Telescope Thread] Telescope: Settling for 5 seconds
[9/5/2016 1:06:56 AM] [DEBUG] [Telescope Thread] Telescope: Settling has completed
[9/5/2016 1:06:57 AM] [DEBUG] [Pier Flip Thread] Meridian Flip: Telescope command to meridian flip has completed
[9/5/2016 1:06:57 AM] [DEBUG] [Pier Flip Thread] Meridian Flip: Telescope has performed meridian flip
[9/5/2016 1:06:57 AM] [DEBUG] [Pier Flip Thread] Meridian Flip: Flipping Auto Guider calibration data
[9/5/2016 1:06:57 AM] [DEBUG] [Pier Flip Thread] Sending to PHD2:
{“method”: “flip_calibration”, “id”: 1005}

[9/5/2016 1:06:58 AM] [DEBUG] [Pier Flip Thread] Autoguider (PHDv2) successfully flipped calibration data
[9/5/2016 1:06:58 AM] [DEBUG] [Pier Flip Thread] Meridian Flip: Performing Auto Center
[9/5/2016 1:06:58 AM] [DEBUG] [Telescope Thread] Center telescope message received…
[9/5/2016 1:06:58 AM] [DEBUG] [Telescope Thread] Solving with Plate Solver PlateSolve2…
[9/5/2016 1:06:58 AM] [DEBUG] [Telescope Thread] Performing auto center step 1…
[9/5/2016 1:06:58 AM] [DEBUG] [Telescope Thread] Skipping step 1…
[9/5/2016 1:06:58 AM] [DEBUG] [Telescope Thread] Auto center reference frame solved successfully…
[9/5/2016 1:06:58 AM] [DEBUG] [Telescope Thread] Performing auto center step 2…
[9/5/2016 1:06:58 AM] [DEBUG] [Telescope Thread] Created full file name: C:\Users\toshiba\AppData\Local\SequenceGenerator\Temp\plate_solve_image-1.fit
[9/5/2016 1:06:58 AM] [DEBUG] [Camera Thread] SGM_CAMERA_PLATE_SOLVER_CAPTURE message received…
[9/5/2016 1:06:58 AM] [DEBUG] [Camera Thread] Collecting FITs headers for plate solve frame…
[9/5/2016 1:06:58 AM] [DEBUG] [Camera Thread] Collecting FITs headers for plate solve frame…
[9/5/2016 1:06:58 AM] [DEBUG] [Camera Thread] SetAscomNormalSpeed…
[9/5/2016 1:06:58 AM] [DEBUG] [Camera Thread] Cannot set readout speed, not supported by camera…
[9/5/2016 1:07:01 AM] [DEBUG] [Camera Thread] Created full file name: C:\Users\toshiba\AppData\Local\SequenceGenerator\Temp\plate_solve_image-1.fit
[9/5/2016 1:07:01 AM] [DEBUG] [Camera Thread] SaveFileAscom: Start…
[9/5/2016 1:07:01 AM] [DEBUG] [Camera Thread] SaveFileAscom: Checking image data…
[9/5/2016 1:07:01 AM] [DEBUG] [Camera Thread] SaveFileAscom: Create normal preview bitmap…
[9/5/2016 1:07:01 AM] [DEBUG] [Camera Thread] SaveFileAscom: Locking preview bits…
[9/5/2016 1:07:01 AM] [DEBUG] [Camera Thread] SaveFileAscom: Validating file name…
[9/5/2016 1:07:01 AM] [DEBUG] [Camera Thread] SaveFileAscom: Starting byte traversal…
[9/5/2016 1:07:01 AM] [DEBUG] [Camera Thread] SaveFileAscom: Unlocking preview bits…
[9/5/2016 1:07:01 AM] [DEBUG] [Camera Thread] SaveFileAscom: Saving preview bitmap to disk…
[9/5/2016 1:07:01 AM] [DEBUG] [Camera Thread] SaveFileBmp16: Locking bitmap for disk write…
[9/5/2016 1:07:01 AM] [DEBUG] [Camera Thread] SaveFileBmp16: Opening file stream…
[9/5/2016 1:07:01 AM] [DEBUG] [Camera Thread] SaveFileBmp16: Writing FITS headers…
[9/5/2016 1:07:01 AM] [DEBUG] [Camera Thread] SaveFileBmp16: Traversing and persisting bitmap data…
[9/5/2016 1:07:01 AM] [DEBUG] [Camera Thread] SaveFileBmp16: FITS block fill…
[9/5/2016 1:07:01 AM] [DEBUG] [Camera Thread] SaveFileBmp16: Unlocking bitmap…
[9/5/2016 1:07:01 AM] [DEBUG] [Camera Thread] SaveFileBmp16: Closing file stream
[9/5/2016 1:07:01 AM] [DEBUG] [Camera Thread] Internal Interface: Set Preview…
[9/5/2016 1:07:01 AM] [DEBUG] [Camera Thread] Display image preview using asynch task…
[9/5/2016 1:07:01 AM] [DEBUG] [Camera Thread] SaveFileAscom: Done
[9/5/2016 1:07:01 AM] [DEBUG] [Camera Thread] =========== Save file took 123 ms
[9/5/2016 1:07:01 AM] [DEBUG] [Camera Thread] SGM_CAMERA_PLATE_SOLVER_CAPTURE complete…
[9/5/2016 1:07:01 AM] [DEBUG] [Telescope Thread] Capture complete, attempting to plate solve image C:\Users\toshiba\AppData\Local\SequenceGenerator\Temp\plate_solve_image-1.fit
[9/5/2016 1:07:01 AM] [DEBUG] [Telescope Thread] PlateSove2 Param: RA (HRS) - 22.9520781418737
[9/5/2016 1:07:01 AM] [DEBUG] [Telescope Thread] PlateSove2 Param: RA (RAD) - 6.00884000626077
[9/5/2016 1:07:01 AM] [DEBUG] [Telescope Thread] PlateSove2 Param: DEC (DEG) - 62.6396409574468
[9/5/2016 1:07:01 AM] [DEBUG] [Telescope Thread] PlateSove2 Param: DEC (RAD) - 1.09326797697454
[9/5/2016 1:07:01 AM] [DEBUG] [Telescope Thread] PlateSove2 Param: SCALE - 2.57693
[9/5/2016 1:07:01 AM] [DEBUG] [Telescope Thread] PlateSove2 Param: Width - 1164
[9/5/2016 1:07:01 AM] [DEBUG] [Telescope Thread] PlateSove2 Param: Height - 880
[9/5/2016 1:07:01 AM] [DEBUG] [Telescope Thread] PlateSove2 Param: Regions - 999
[9/5/2016 1:07:01 AM] [DEBUG] [Telescope Thread] PlateSolve2 Command Line:
[9/5/2016 1:07:01 AM] [DEBUG] [Telescope Thread] C:\Users\toshiba\AppData\Local\SequenceGenerator\PlateSolve2.exe 6.00884000626077,1.09326797697454,0.01454221190021,0.01099411208950,999,C:\Users\toshiba\AppData\Local\SequenceGenerator\Temp\psXSolve_5.fit
[9/5/2016 1:07:04 AM] [DEBUG] [Telescope Thread] Auto Center scope frame solved successfully…
[9/5/2016 1:07:04 AM] [DEBUG] [Telescope Thread] Checking to see if solve might be bad…
[9/5/2016 1:07:04 AM] [DEBUG] [Telescope Thread] Solve appears to be good…
[9/5/2016 1:07:04 AM] [DEBUG] [Telescope Thread] Telescope: Syncing to J2000 RA: 23.0497833120586 Dec: 62.1831868548506
[9/5/2016 1:07:04 AM] [DEBUG] [Telescope Thread] Attempting to write fits header info for C:\Users\toshiba\AppData\Local\SequenceGenerator\Temp\plate_solve_image-1.fit
[9/5/2016 1:07:04 AM] [DEBUG] [Telescope Thread] Opening fits file…
[9/5/2016 1:07:04 AM] [DEBUG] [Telescope Thread] Successfully opened fits file…
[9/5/2016 1:07:04 AM] [DEBUG] [Telescope Thread] Writing fits headers…
[9/5/2016 1:07:04 AM] [DEBUG] [Telescope Thread] Closing fits file
[9/5/2016 1:07:04 AM] [DEBUG] [Telescope Thread] Failed to sync the rotator to 266.52 degrees, not connected!
[9/5/2016 1:07:04 AM] [DEBUG] [Telescope Thread] Performing auto center step 3 (scope)…
[9/5/2016 1:07:04 AM] [DEBUG] [Telescope Thread] Auto center slewing scope to match reference…
[9/5/2016 1:07:04 AM] [DEBUG] [Telescope Thread] Telescope: Slewing to J2000 RA: 0.000198477716420342 (00h00m00.71s) Dec: 0.000713443910953515 (00°00’02.57")
[9/5/2016 1:07:57 AM] [DEBUG] [PHD2 Listener Thread] PHD2 - No messages received from PHD2 for 1 minute, checking socket with status…
[9/5/2016 1:07:57 AM] [DEBUG] [PHD2 Listener Thread] Checking PHD2 state…
[9/5/2016 1:07:57 AM] [DEBUG] [PHD2 Listener Thread] PHD2 GetPhdStatus - Pre-Wait : Stopped
[9/5/2016 1:07:57 AM] [DEBUG] [PHD2 Listener Thread] Sending to PHD2:
{“method”: “get_app_state”, “id”: 1001}

[9/5/2016 1:07:57 AM] [DEBUG] [PHD2 Listener Thread] PHD2 GetPhdStatus - Post-Wait: Stopped
[9/5/2016 1:07:59 AM] [DEBUG] [Telescope Thread] Scope reports it is done with synchronous slew, verifying…
[9/5/2016 1:07:59 AM] [DEBUG] [Telescope Thread] Telescope: Slewing has completed
[9/5/2016 1:07:59 AM] [DEBUG] [Telescope Thread] Telescope: Settling for 5 seconds
[9/5/2016 1:08:04 AM] [DEBUG] [Telescope Thread] Telescope: Settling has completed
[9/5/2016 1:08:04 AM] [DEBUG] [Telescope Thread] Auto center slew complete…
[9/5/2016 1:08:04 AM] [DEBUG] [Telescope Thread] Performing auto center step 4…
[9/5/2016 1:08:04 AM] [DEBUG] [Telescope Thread] Created full file name: C:\Users\toshiba\AppData\Local\SequenceGenerator\Temp\plate_solve_image-1.fit
[9/5/2016 1:08:04 AM] [DEBUG] [Camera Thread] SGM_CAMERA_PLATE_SOLVER_CAPTURE message received…
[9/5/2016 1:08:04 AM] [DEBUG] [Camera Thread] Collecting FITs headers for plate solve frame…
[9/5/2016 1:08:04 AM] [DEBUG] [Camera Thread] Collecting FITs headers for plate solve frame…
[9/5/2016 1:08:04 AM] [DEBUG] [Camera Thread] SetAscomNormalSpeed…
[9/5/2016 1:08:04 AM] [DEBUG] [Camera Thread] Cannot set readout speed, not supported by camera…
[9/5/2016 1:08:07 AM] [DEBUG] [Camera Thread] Created full file name: C:\Users\toshiba\AppData\Local\SequenceGenerator\Temp\plate_solve_image-1.fit
[9/5/2016 1:08:07 AM] [DEBUG] [Camera Thread] SaveFileAscom: Start…
[9/5/2016 1:08:07 AM] [DEBUG] [Camera Thread] SaveFileAscom: Checking image data…
[9/5/2016 1:08:07 AM] [DEBUG] [Camera Thread] SaveFileAscom: Create normal preview bitmap…
[9/5/2016 1:08:07 AM] [DEBUG] [Camera Thread] SaveFileAscom: Locking preview bits…
[9/5/2016 1:08:07 AM] [DEBUG] [Camera Thread] SaveFileAscom: Validating file name…
[9/5/2016 1:08:07 AM] [DEBUG] [Camera Thread] SaveFileAscom: Starting byte traversal…
[9/5/2016 1:08:07 AM] [DEBUG] [Camera Thread] SaveFileAscom: Unlocking preview bits…
[9/5/2016 1:08:07 AM] [DEBUG] [Camera Thread] SaveFileAscom: Saving preview bitmap to disk…
[9/5/2016 1:08:07 AM] [DEBUG] [Camera Thread] SaveFileBmp16: Locking bitmap for disk write…
[9/5/2016 1:08:07 AM] [DEBUG] [Camera Thread] SaveFileBmp16: Opening file stream…
[9/5/2016 1:08:07 AM] [DEBUG] [Camera Thread] SaveFileBmp16: Writing FITS headers…
[9/5/2016 1:08:07 AM] [DEBUG] [Camera Thread] SaveFileBmp16: Traversing and persisting bitmap data…
[9/5/2016 1:08:07 AM] [DEBUG] [Camera Thread] SaveFileBmp16: FITS block fill…
[9/5/2016 1:08:07 AM] [DEBUG] [Camera Thread] SaveFileBmp16: Unlocking bitmap…
[9/5/2016 1:08:07 AM] [DEBUG] [Camera Thread] SaveFileBmp16: Closing file stream
[9/5/2016 1:08:07 AM] [DEBUG] [Camera Thread] Internal Interface: Set Preview…
[9/5/2016 1:08:07 AM] [DEBUG] [Camera Thread] Display image preview using asynch task…
[9/5/2016 1:08:07 AM] [DEBUG] [Camera Thread] SaveFileAscom: Done
[9/5/2016 1:08:07 AM] [DEBUG] [Camera Thread] =========== Save file took 124 ms
[9/5/2016 1:08:07 AM] [DEBUG] [Camera Thread] SGM_CAMERA_PLATE_SOLVER_CAPTURE complete…
[9/5/2016 1:08:21 AM] [DEBUG] [Main Thread] PopulateDataModel: Transferring view to the data model…
[9/5/2016 1:08:21 AM] [DEBUG] [MF Update Thread] Performing serialize…
[9/5/2016 1:08:57 AM] [DEBUG] [PHD2 Listener Thread] PHD2 - No messages received from PHD2 for 1 minute, checking socket with status…
[9/5/2016 1:08:57 AM] [DEBUG] [PHD2 Listener Thread] Checking PHD2 state…
[9/5/2016 1:08:57 AM] [DEBUG] [PHD2 Listener Thread] PHD2 GetPhdStatus - Pre-Wait : Stopped
[9/5/2016 1:08:57 AM] [DEBUG] [PHD2 Listener Thread] Sending to PHD2:
{“method”: “get_app_state”, “id”: 1001}

[9/5/2016 1:08:57 AM] [DEBUG] [PHD2 Listener Thread] PHD2 GetPhdStatus - Post-Wait: Stopped
[9/5/2016 1:09:57 AM] [DEBUG] [PHD2 Listener Thread] PHD2 - No messages received from PHD2 for 1 minute, checking socket with status…
[9/5/2016 1:09:57 AM] [DEBUG] [PHD2 Listener Thread] Checking PHD2 state…
[9/5/2016 1:09:57 AM] [DEBUG] [PHD2 Listener Thread] PHD2 GetPhdStatus - Pre-Wait : Stopped
[9/5/2016 1:09:57 AM] [DEBUG] [PHD2 Listener Thread] Sending to PHD2:
{“method”: “get_app_state”, “id”: 1001}

[9/5/2016 1:09:57 AM] [DEBUG] [PHD2 Listener Thread] PHD2 GetPhdStatus - Post-Wait: Stopped
[9/5/2016 1:10:57 AM] [DEBUG] [PHD2 Listener Thread] PHD2 - No messages received from PHD2 for 1 minute, checking socket with status…
[9/5/2016 1:10:57 AM] [DEBUG] [PHD2 Listener Thread] Checking PHD2 state…
[9/5/2016 1:10:57 AM] [DEBUG] [PHD2 Listener Thread] PHD2 GetPhdStatus - Pre-Wait : Stopped
[9/5/2016 1:10:57 AM] [DEBUG] [PHD2 Listener Thread] Sending to PHD2:
{“method”: “get_app_state”, “id”: 1001}

[9/5/2016 1:10:57 AM] [DEBUG] [PHD2 Listener Thread] PHD2 GetPhdStatus - Post-Wait: Stopped
[9/5/2016 1:11:57 AM] [DEBUG] [PHD2 Listener Thread] PHD2 - No messages received from PHD2 for 1 minute, checking socket with status…
[9/5/2016 1:11:57 AM] [DEBUG] [PHD2 Listener Thread] Checking PHD2 state…
[9/5/2016 1:11:57 AM] [DEBUG] [PHD2 Listener Thread] PHD2 GetPhdStatus - Pre-Wait : Stopped
[9/5/2016 1:11:57 AM] [DEBUG] [PHD2 Listener Thread] Sending to PHD2:
{“method”: “get_app_state”, “id”: 1001}

[9/5/2016 1:11:57 AM] [DEBUG] [PHD2 Listener Thread] PHD2 GetPhdStatus - Post-Wait: Stopped
[9/5/2016 1:12:05 AM] [DEBUG] [Telescope Thread] Aborting solver frame. Time out!
[9/5/2016 1:12:05 AM] [DEBUG] [Telescope Thread] Aborting auto center…
[9/5/2016 1:12:05 AM] [DEBUG] [Telescope Thread] Auto center aborted, closing centering dialog…
[9/5/2016 1:12:06 AM] [DEBUG] [Pier Flip Thread] Recovery mode invoked but sequence is flagged as aborted, aborting recovery…
[9/5/2016 1:12:10 AM] [DEBUG] [Sequence Thread] Blocking Pier Flip: Failed to meridian flip, aborting sequence (True)
[9/5/2016 1:12:10 AM] [DEBUG] [Sequence Thread] Adding sequence level notification: Failed to meridian flip, aborting sequence.
[9/5/2016 1:12:10 AM] [DEBUG] [Sequence Thread] TEMP - Current Event3: 0
[9/5/2016 1:12:10 AM] [DEBUG] [Sequence Thread] TEMP - Current Event10: 0
[9/5/2016 1:12:10 AM] [DEBUG] [Sequence Thread] Run event requested sequence abort…
[9/5/2016 1:12:10 AM] [DEBUG] [Pier Flip Thread] Meridian Flip: Procedure complete
[9/5/2016 1:12:10 AM] [DEBUG] [Sequence Thread] Clearing timed monitoring events…
[9/5/2016 1:12:10 AM] [DEBUG] [Sequence Thread] Checking RunEndOfSequenceEquipmentOptions, force = True
[9/5/2016 1:12:10 AM] [DEBUG] [Sequence Thread] In RunEndOfSequenceEquipmentOptions
[9/5/2016 1:12:10 AM] [DEBUG] [Sequence Thread] Parking telescope…
[9/5/2016 1:12:10 AM] [DEBUG] [Sequence Thread] ASCOM Telescope: Park message received.
[9/5/2016 1:12:10 AM] [DEBUG] [Sequence Thread] ASCOM Telescope: Sending park…
[9/5/2016 1:12:42 AM] [DEBUG] [Sequence Thread] ASCOM Telescope: Parked
[9/5/2016 1:12:42 AM] [DEBUG] [Main Thread] Aborting sequence timer thread…
[9/5/2016 1:12:42 AM] [DEBUG] [Main Thread] Sending sequence end notification…
[9/5/2016 1:12:42 AM] [DEBUG] [Main Thread] Resetting UI elements…
[9/5/2016 1:12:42 AM] [DEBUG] [Main Thread] Checking if sequence has work left…
[9/5/2016 1:12:42 AM] [DEBUG] [Main Thread] Work left…
[9/5/2016 1:12:42 AM] [DEBUG] [Main Thread] Updating big status…
[9/5/2016 1:12:42 AM] [DEBUG] [Main Thread] Enabling menu items…
[9/5/2016 1:12:42 AM] [DEBUG] [Main Thread] Set target icons…
[9/5/2016 1:12:42 AM] [DEBUG] [Main Thread] Removing camera protection…
[9/5/2016 1:12:42 AM] [DEBUG] [Main Thread] Monitoring system shutdown…
[9/5/2016 1:12:42 AM] [DEBUG] [Main Thread] SequenceEnds complete…
[9/5/2016 1:12:42 AM] [DEBUG] [Sequence Thread] Restoring system standby state…
[9/5/2016 1:12:58 AM] [DEBUG] [PHD2 Listener Thread] PHD2 - No messages received from PHD2 for 1 minute, checking socket with status…
[9/5/2016 1:12:58 AM] [DEBUG] [PHD2 Listener Thread] Checking PHD2 state…
[9/5/2016 1:12:58 AM] [DEBUG] [PHD2 Listener Thread] PHD2 GetPhdStatus - Pre-Wait : Stopped
[9/5/2016 1:12:58 AM] [DEBUG] [PHD2 Listener Thread] Sending to PHD2:
{“method”: “get_app_state”, “id”: 1001}

[9/5/2016 1:12:58 AM] [DEBUG] [PHD2 Listener Thread] PHD2 GetPhdStatus - Post-Wait: Stopped
[9/5/2016 1:13:58 AM] [DEBUG] [PHD2 Listener Thread] PHD2 - No messages received from PHD2 for 1 minute, checking socket with status…
[9/5/2016 1:13:58 AM] [DEBUG] [PHD2 Listener Thread] Checking PHD2 state…
[9/5/2016 1:13:58 AM] [DEBUG] [PHD2 Listener Thread] PHD2 GetPhdStatus - Pre-Wait : Stopped
[9/5/2016 1:13:58 AM] [DEBUG] [PHD2 Listener Thread] Sending to PHD2:
{“method”: “get_app_state”, “id”: 1001}

[9/5/2016 1:13:58 AM] [DEBUG] [PHD2 Listener Thread] PHD2 GetPhdStatus - Post-Wait: Stopped
[9/5/2016 1:14:58 AM] [DEBUG] [PHD2 Listener Thread] PHD2 - No messages received from PHD2 for 1 minute, checking socket with status…
[9/5/2016 1:14:58 AM] [DEBUG] [PHD2 Listener Thread] Checking PHD2 state…
[9/5/2016 1:14:58 AM] [DEBUG] [PHD2 Listener Thread] PHD2 GetPhdStatus - Pre-Wait : Stopped
[9/5/2016 1:14:58 AM] [DEBUG] [PHD2 Listener Thread] Sending to PHD2:
{“method”: “get_app_state”, “id”: 1001}

[9/5/2016 1:14:58 AM] [DEBUG] [PHD2 Listener Thread] PHD2 GetPhdStatus - Post-Wait: Stopped
[9/5/2016 1:15:58 AM] [DEBUG] [PHD2 Listener Thread] PHD2 - No messages received from PHD2 for 1 minute, checking socket with status…
[9/5/2016 1:15:58 AM] [DEBUG] [PHD2 Listener Thread] Checking PHD2 state…
[9/5/2016 1:15:58 AM] [DEBUG] [PHD2 Listener Thread] PHD2 GetPhdStatus - Pre-Wait : Stopped
[9/5/2016 1:15:58 AM] [DEBUG] [PHD2 Listener Thread] Sending to PHD2:
{“method”: “get_app_state”, “id”: 1001}

[9/5/2016 1:15:58 AM] [DEBUG] [PHD2 Listener Thread] PHD2 GetPhdStatus - Post-Wait: Stopped
[9/5/2016 1:16:58 AM] [DEBUG] [PHD2 Listener Thread] PHD2 - No messages received from PHD2 for 1 minute, checking socket with status…
[9/5/2016 1:16:58 AM] [DEBUG] [PHD2 Listener Thread] Checking PHD2 state…
[9/5/2016 1:16:58 AM] [DEBUG] [PHD2 Listener Thread] PHD2 GetPhdStatus - Pre-Wait : Stopped
[9/5/2016 1:16:58 AM] [DEBUG] [PHD2 Listener Thread] Sending to PHD2:
{“method”: “get_app_state”, “id”: 1001}

Just like my first problem: What happened?I found three problems at least, and expect stable SGPro - Sequence Generator - Main Sequence Software
Ken said: This is a known issue and will be addressed in the 2.5.2 beta (soon). It affects some cameras more obviously than others… sorry for an inconvenience.

Thanks, so it looks like SGP is losing contact with my QHY5L in PHD2. And there is a fix in the next Beta.

No, the connection is fine… the error reporting is not accurate. We will be putting a beta out soon.

Thanks Ken, I appreciate the quick feedback.