All i have issue with post events, does anyone have suggestion
I run last night sequence of m51 rond 5:30 i stopped my sequence and hoop that de post event triggers the park action. but that didn’t work
de status of sgp when i woke up.
the question is what did i do wrong why was it not parking. below the log it looks it kicks in the post events but i dont see the message park
be aware the sequenc status was 68/70.
Thanks in advance
Chris
[04/05/20 05:16:47.391][DEBUG][Sequence Thread][SQ;] GNS: Sent status message to GNS (Target terminated early due to target end time constraint…)…
[04/05/20 05:16:47.490][DEBUG][Sequence Thread][SQ;] Handling monitoring event (Good Night System, Status): Target m51 has terminated early due to target end time.
[04/05/20 05:16:47.490][DEBUG][Sequence Thread][SQ;] GNS: Sent status message to GNS (Target m51 has terminated early due to target end time.)…
[04/05/20 05:16:47.490][DEBUG][Sequence Thread][SQ;] Attempting to move to next event…
[04/05/20 05:16:47.490][DEBUG][Sequence Thread][SQ;] Finding first active group…
[04/05/20 05:16:47.490][DEBUG][Sequence Thread][SQ;] Looking at target m51…
[04/05/20 05:16:47.490][DEBUG][Sequence Thread][SQ;] Start time has time lock, calculating start alt for 04/04/2020 22:30:00
[04/05/20 05:16:47.503][DEBUG][Sequence Thread][SQ;] Start alt set to 53.7313190983917
[04/05/20 05:16:47.503][DEBUG][Sequence Thread][SQ;] End time has time lock, calculating end alt for 04/05/2020 05:20:00
[04/05/20 05:16:47.506][DEBUG][Sequence Thread][SQ;] End alt set to 60.4700914531085
[04/05/20 05:16:47.507][DEBUG][Sequence Thread][SQ;] Looking at event[0]…
[04/05/20 05:16:47.507][DEBUG][Sequence Thread][SQ;] Found event event[0] with remaining frames.
[04/05/20 05:16:47.507][DEBUG][Sequence Thread][SQ;] Event[0] frame count: 68/75…
[04/05/20 05:16:47.507][DEBUG][Sequence Thread][SQ;] Target is active: True
[04/05/20 05:16:47.507][DEBUG][Sequence Thread][SQ;] Target is complete: False
[04/05/20 05:16:47.507][DEBUG][Sequence Thread][SQ;] Target marked as past end time: True
[04/05/20 05:16:47.507][DEBUG][Sequence Thread][SQ;] Target has end time: True
[04/05/20 05:16:47.507][DEBUG][Sequence Thread][SQ;] Target end time: 04/05/2020 05:20:00
[04/05/20 05:16:47.507][DEBUG][Sequence Thread][SQ;] Sequence complete.
[04/05/20 05:16:47.507][DEBUG][Sequence Thread][SQ;] No valid targets remain, aborting…
[04/05/20 05:16:47.507][DEBUG][Sequence Thread][SQ;] ********* Run post sequence *********
[04/05/20 05:16:47.507][DEBUG][Sequence Thread][SQ;] SGPro capture cal frame mode is OFF…
[04/05/20 05:16:47.507][DEBUG][Sequence Thread][SQ;] Clearing timed monitoring events…
[04/05/20 05:16:47.517][DEBUG][Sequence Thread][SQ;] Checking RunEndOfSequenceEquipmentOptions, force = True
[04/05/20 05:16:47.517][DEBUG][Sequence Thread][SQ;] In RunEndOfSequenceEquipmentOptions
[04/05/20 05:16:50.258][DEBUG][Image History Worker][SQ;] Star detection using min star size of 3px…
[04/05/20 05:16:50.258][DEBUG][Image History Worker][SQ;] Star detection using max star size of 60px…
[04/05/20 05:16:50.348][DEBUG][Image History Worker][SQ;] Find stars took: 3431 ms…
[04/05/20 05:16:50.348][DEBUG][Image History Worker][SQ;] Star list contains 62 stars…
[04/05/20 05:16:50.348][DEBUG][Image History Worker][SQ;] Calculating HFR with sample size: 6
[04/05/20 05:16:50.535][DEBUG][Image History Worker][SQ;] Image analysis (async) END
[04/05/20 05:17:18.946][DEBUG][Sequence Thread][SQ;] Stopping auto guiding…
[04/05/20 05:17:18.946][DEBUG][Sequence Thread][SQ;] Attempting to stop PHD2 guiding…
[04/05/20 05:17:18.946][DEBUG][Sequence Thread][SQ;] Checking PHD2 state…
[04/05/20 05:17:18.946][DEBUG][Sequence Thread][SQ;] PHD2 GetPhdStatus - Pre-Wait : Guiding
[04/05/20 05:17:18.946][DEBUG][Sequence Thread][SQ;] Sending to PHD2:
{“method”: “get_app_state”, “id”: 1001}
[04/05/20 05:17:19.054][DEBUG][Sequence Thread][SQ;] PHD2 GetPhdStatus - Post-Wait: Guiding
[04/05/20 05:17:19.054][DEBUG][Sequence Thread][SQ;] Sending to PHD2:
{“method”: “stop_capture”, “id”: 1004}
[04/05/20 05:17:19.054][DEBUG][Sequence Thread][SQ;] Checking PHD2 state…
[04/05/20 05:17:19.054][DEBUG][Sequence Thread][SQ;] PHD2 GetPhdStatus - Pre-Wait : Guiding
[04/05/20 05:17:19.054][DEBUG][Sequence Thread][SQ;] Sending to PHD2:
{“method”: “get_app_state”, “id”: 1001}
[04/05/20 05:17:19.155][DEBUG][Sequence Thread][SQ;] PHD2 GetPhdStatus - Post-Wait: Guiding
[04/05/20 05:17:20.157][DEBUG][Sequence Thread][SQ;] Checking PHD2 state…
[04/05/20 05:17:20.157][DEBUG][Sequence Thread][SQ;] PHD2 GetPhdStatus - Pre-Wait : Guiding
[04/05/20 05:17:20.157][DEBUG][Sequence Thread][SQ;] Sending to PHD2:
{“method”: “get_app_state”, “id”: 1001}
[04/05/20 05:17:20.258][DEBUG][Sequence Thread][SQ;] PHD2 GetPhdStatus - Post-Wait: Stopped
[04/05/20 05:17:20.258][DEBUG][Sequence Thread][SQ;] PHD2: Successfully stopped PHD2…
[04/05/20 05:17:20.258][DEBUG][Sequence Thread][SQ;] Autoguider (PHD2) stopped Successfully
[04/05/20 05:17:20.258][DEBUG][Sequence Thread][SQ;] Waiting for Autoguider to stop…
[04/05/20 05:17:20.258][DEBUG][Sequence Thread][SQ;] Checking PHD2 state…
[04/05/20 05:17:20.258][DEBUG][Sequence Thread][SQ;] PHD2 GetPhdStatus - Pre-Wait : Stopped
[04/05/20 05:17:20.258][DEBUG][Sequence Thread][SQ;] Sending to PHD2:
{“method”: “get_app_state”, “id”: 1001}
[04/05/20 05:17:20.359][DEBUG][Sequence Thread][SQ;] PHD2 GetPhdStatus - Post-Wait: Stopped
[04/05/20 05:17:20.359][DEBUG][Main Thread][SQ;] Adding sequence level notification: Auto guider has been stopped successfully.
[04/05/20 05:17:20.437][DEBUG][Sequence Thread][SQ;] Sending Notification: Status - Auto guider has been stopped successfully.
[04/05/20 05:17:20.437][DEBUG][Sequence Thread][SQ;] Handling monitoring event (Good Night System, Status): Auto guider has been stopped successfully.
[04/05/20 05:17:20.437][DEBUG][Sequence Thread][SQ;] GNS: Sent status message to GNS (Auto guider has been stopped successfully.)…
[04/05/20 05:17:20.448][DEBUG][Main Thread][SQ;] Aborting sequence timer thread…
[04/05/20 05:17:20.448][DEBUG][Main Thread][SQ;] Sending sequence end notification…
[04/05/20 05:17:20.448][DEBUG][Main Thread][SQ;] Adding sequence level notification: Sequence has ended
[04/05/20 05:17:20.523][DEBUG][Main Thread][SQ;] Sending Notification: Status - Sequence has ended
[04/05/20 05:17:20.523][DEBUG][Main Thread][SQ;] Handling monitoring event (Good Night System, Status): Sequence has ended
[04/05/20 05:17:20.524][DEBUG][Main Thread][SQ;] GNS: Sent status message to GNS (Sequence has ended)…
[04/05/20 05:17:20.524][DEBUG][Main Thread][SQ;] Resetting UI elements…
[04/05/20 05:17:20.524][DEBUG][Main Thread][SQ;] Checking if sequence has work left…
[04/05/20 05:17:20.524][DEBUG][Main Thread][SQ;] No work left…
[04/05/20 05:17:20.524][DEBUG][Main Thread][SQ;] Updating big status…
[04/05/20 05:17:20.524][DEBUG][Main Thread][SQ;] Enabling menu items…
[04/05/20 05:17:21.073][DEBUG][Main Thread][SQ;] Set target icons…
[04/05/20 05:17:21.089][DEBUG][Main Thread][SQ;] Removing camera protection…
[04/05/20 05:17:21.103][DEBUG][Main Thread][SQ;] Attempting to find next event…
[04/05/20 05:17:21.104][DEBUG][Main Thread][SQ;] Error in GetNextEvent: Index was out of range. Must be non-negative and less than the size of the collection.
Parameter name: index
[04/05/20 05:17:21.119][DEBUG][Main Thread][SQ;] Monitoring system shutdown…
[04/05/20 05:17:21.119][DEBUG][Main Thread][SQ;] SequenceEnds complete…
[04/05/20 05:17:21.120][DEBUG][Sequence Thread][SQ;] Restoring system standby state…