Problems with moving my mount with SGPRO 3

Sequence Generator Plate Solving
1

Hi everyone,
I have a Losmandy G11 with Gemini 2. I cold start the mount and let plate solving guide the system. I have looked for answers to my problems on this web site and I have called Losmandy. Both of these problems began after I upgraded to SGPro 3. Both problems relate to controlling the mount from SGPRO.

  1. I can no longer park the mount in anything but alt/az position. In talking to Losmandy, I found no option to change that in the ASCOM settings. The set park option in SGPRO does not work with my mount after the upgrade to 3. I’m hoping someone her has an answer.

  2. Every time I am within 1.5 hours to the east of the meridian and attempt a centering operation, things start normally with the initial plate scan and solve but the resultant command to move the mount sends it slewing to the west until the mounts safety settings stop it. This happens nowhere else except near the meridian when starting a new centering operation, but it happens every time there.

I sure hope someone has some insights on these problems.

Thanks

Rob