Lets sort this out…I concur with this issue Jussi report, I get this too but have not had time to report, now looks like the ripe time.
So lets do this the correct way…Here’s the Log file:
sg_logfile_20160208165758.txt (222.3 KB)
Ran a simple sequence with ASCOM EQMOD Simulator mount, the V2 simulator camera and PHD2 using a simulated camera. Used a target aquired from the F & M wizard for the sequence.
This is what I done to match the Log:
Run sequence and wait for the first image to begin exposing
Paused sequence and chose Abort current frame and had ‘Run end of sequence actions’ checked ( Exposure is aborted and the mount parks as it should and ‘Resume Sequence’ is displayed in the Sequence modules button)
Click ‘Resume Sequence’
This is what happens next:
My optional start of sequence message appears
Warning about mount being parked and I choose ‘YES’ to allow an un-park (This usually then un-parks mount “announced by ASCOM voice - UN-PARKED” & begins slewing but no Un-parked voice comes from ASCOM and mount is still parked)
Status bar shows: Starting and Calibrating the auto guider, Please Wait… (PHD2 calibrates)
As soon as PHD2 begins guiding ASCOM voice shouts…‘UNPARKED’ (mount IS un-parked, still in the PARKED position but not tracking)
Status bar shows ‘Auto guider is settling’ with my set 10 seconds count up in progress until satisfied
Imaging resumes but with the mount un-parked and still in the parked position & not tracking.
Hmmmm, something not quite right there