Sequence ends due to a "filter not set" issue

Love the software,

But I have a very annoying issue,

I have a Xagyl 8 position filter wheel and it will works perfectly with the Xagyl Ascom controller.

However while using SGP I have to click on the wrench button 2-3 times until it can detect my filter wheel. After connecting it seems to work well and then all of a sudden my sequence ends due to a filter not set issue.

I also have a Starlight feather touch focuser in the mix but doubt if that caused any issues.

Any help would be greatly appreciated!

Steve

Try another cable. :slight_smile:

Sounds like a USB connectivity issue to me.

Thanks but already tried that with of course no luck. Very frustrating!!!

My Xagyl has that issue sometimes, haven’t got a clue how to cure it, tried new cables and a reinstall.