Sequence running but no image capture

JAMI · July 26, 2017, 8:30pm

Hi, I set up SGP for the first time, with all equipment hooked up. Camera, filter wheel, focusing, plate solving mount, etc. I set up the parameters for the camera and filter wheel, then setup a simple sequence, after focusing. The sequence ran but the green bars did not move and the end of the sequence, no data was captured. I looked in the assigned folder but there was nothing there. Also PHD2 stopped a couple of times and I restarted the sequence, with the same result. I suspect I must have one or two settings missing or wrong.

Any advice will be much appreciated. I looked through the forums but could not find any with the same issue.

Ken · July 29, 2017, 9:51pm

@JAMI

This is certainly a setup issue with your sequence. If you can send it over we can take a look.

JAMI · July 29, 2017, 10:22pm

Thanks Ken,

I will try to image tonight and see what happens. I do suspect, as you mentioned, that it is something I forgot. How do I send you the info, in case I have the same trouble. Would it be a screenshot?

Ken · July 29, 2017, 10:49pm

For the problem you describe, simply sending the sgf file is sufficient.

JAMI · August 3, 2017, 8:24pm

Hi Ken, I am not sure how to send the sgf file or what it is. Is this what you need?

[7/30/2017 9:29:02 PM] [DEBUG] [Main Thread] Licensing: Machine ID found…
[7/30/2017 9:29:02 PM] [DEBUG] [Main Thread] Checking for valid internet connection…
[7/30/2017 9:29:02 PM] [DEBUG] [Main Thread] Valid internet connection detected…
[7/30/2017 9:29:03 PM] [DEBUG] [Main Thread] Licensing: Request for licenses successful, writing cookie…
[7/30/2017 9:29:03 PM] [DEBUG] [Main Thread] Licensing: Applying licenses…
[7/30/2017 9:29:03 PM] [DEBUG] [Main Thread] Licensing: Licenses applied…
[7/30/2017 9:29:03 PM] [DEBUG] [Main Thread] SGPro retail license…
[7/30/2017 9:29:04 PM] [DEBUG] [Main Thread] API successfully started on port 59590…
[7/30/2017 9:29:05 PM] [DEBUG] [Main Thread] Error loading notification settings! Could not find file ‘C:\Users\Owner\AppData\Local\SequenceGenerator\Sequence Generator Pro\notifications.sgd’.
[7/30/2017 9:29:05 PM] [DEBUG] [Main Thread] Error loading GNS endpoint settings! Could not find file ‘C:\Users\Owner\AppData\Local\SequenceGenerator\Sequence Generator Pro\gnsSettings.sgd’.
[7/30/2017 9:29:05 PM] [DEBUG] [Main Thread] Error loading email endpoint addresses! Could not find file ‘C:\Users\Owner\AppData\Local\SequenceGenerator\Sequence Generator Pro\1-emailEndpointAddresses.sgd’.
[7/30/2017 9:29:05 PM] [DEBUG] [Main Thread] Error loading email endpoint addresses! Could not find file ‘C:\Users\Owner\AppData\Local\SequenceGenerator\Sequence Generator Pro\2-emailEndpointAddresses.sgd’.
[7/30/2017 9:29:05 PM] [DEBUG] [Main Thread] Error loading email endpoint addresses! Could not find file ‘C:\Users\Owner\AppData\Local\SequenceGenerator\Sequence Generator Pro\3-emailEndpointAddresses.sgd’.
[7/30/2017 9:29:05 PM] [DEBUG] [Main Thread] Error loading text file endpoint data! Could not find file ‘C:\Users\Owner\AppData\Local\SequenceGenerator\Sequence Generator Pro\1-textFileEndpointSettings.sgd’.
[7/30/2017 9:29:05 PM] [DEBUG] [Main Thread] Error loading text file endpoint data! Could not find file ‘C:\Users\Owner\AppData\Local\SequenceGenerator\Sequence Generator Pro\2-textFileEndpointSettings.sgd’.
[7/30/2017 9:29:05 PM] [DEBUG] [Main Thread] Error loading text file endpoint data! Could not find file ‘C:\Users\Owner\AppData\Local\SequenceGenerator\Sequence Generator Pro\3-textFileEndpointSettings.sgd’.
[7/30/2017 9:29:05 PM] [DEBUG] [Main Thread] ===== S E Q U E N C E G E N E R A T O R (v2.5.1.17) =====
[7/30/2017 9:29:05 PM] [DEBUG] [Main Thread] OS: Microsoft Windows 10 Home
[7/30/2017 9:29:06 PM] [DEBUG] [Focuser Thread] Entering Fouser message dispatch loop…
[7/30/2017 9:29:06 PM] [DEBUG] [Camera Thread] Entering camera message dispatch loop…
[7/30/2017 9:29:06 PM] [DEBUG] [TEC Thread] Entering TEC message dispatch loop…
[7/30/2017 9:29:06 PM] [DEBUG] [Filter Wheel Thread] Entering Filter Wheel message dispatch loop…
[7/30/2017 9:29:06 PM] [DEBUG] [Rotator Thread] Entering Rotator message dispatch loop…
[7/30/2017 9:29:06 PM] [DEBUG] [Auto Guider Thread] Entering Auto Guider message dispatch loop…
[7/30/2017 9:29:06 PM] [DEBUG] [Telescope Thread] Entering Telescope message dispatch loop…
[7/30/2017 9:29:06 PM] [DEBUG] [Auto Guider Error Thread] Entering Auto Guider message dispatch loop…
[7/30/2017 9:29:06 PM] [DEBUG] [Safety Thread] Starting safety monitor…
[7/30/2017 9:29:06 PM] [DEBUG] [Dome Thread] Entering Dome message dispatch loop…
[7/30/2017 9:29:06 PM] [DEBUG] [Environment Device Thread] Starting environment device monitor…
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] Settings changed (or loaded)…
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingMdiAutoStretch = False
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingIgLastFileFolder =
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingFormScaleWarning = False
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingRecoveryDuration = 90
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingSBIGLpt2Address = 278
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingFliFlushLow = 0
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingSBIGLpt1Address = 378
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingMdiMouseAction = Stretch
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingLastAscomCamera =
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingTemperhumInterval = 300
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingASCOMWarningShown = False
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingPlateCamScale = 0
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingCanonMirrorSettle = 0
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingInterface =
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingLastAscomFilterWheel =
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingAstroArtDisplayInstructions = True
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingMdiPhdZoom = 40
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingMdiLastImageDir =
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingTemperHumUserTempComp = 0
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingCaptureCalFramesAlways = False
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingDelayFirst = 0
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingFliNormalSpeedMode = 0
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingFliHighSpeedMode = 0
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingMfPosition = {X=0,Y=0}
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingSoundAttention =
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingPinpointCatalog =
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingCameraOverhead =
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingPlateSolveOn = False
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingAstrometryNetEndpointList = System.Collections.Specialized.StringCollection
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingSBIGGuider = None
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingQSIFanSpeed = 2
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingNaggerText =
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingMdiPhdDisplay = RA/Dec
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingMdiShowToolStrip = True
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingMdiShowCrosshairs = True
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: WindowGeometry =
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingIgRenameStringLocation = 2
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingIgSubFolders = False
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: WindowGeometrySearch =
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingOffset = -1
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingAutoStretchLevel = Low
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingTemperHumUnits = C
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingProfileDirectory =
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingBasename =
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingHfrColor = Color [RoyalBlue]
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingNikonAfBinning = 1
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingSBIGFanOffWithTec = False
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingLastAscomSafetyMonitor =
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingMdiSize = {Width=800, Height=600}
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingIgCopyAndRenameFiles = False
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingSimDownloadTimesAf = False
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingNagger = False
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingImportFromCfw = True
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingMdiShowStatusTrip = True
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingShowTooltipHelp = True
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingLastUpdateCheck = 1/1/2012 12:00:00 AM
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingCpPosition = {X=0,Y=0}
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingSBIGCfwPort =
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingMdiLocation = {X=0,Y=0}
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingIgLastCsvFolder =
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingPlateSolve3Catalogs =
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingSBIGFilterWheel = Auto Detect
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingSBIGConnection = USB
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingDSLRSoftwareBinForAf = False
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingAutoSave = True
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingFirstTime = True
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingAutoRecoveryActive = False
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingMdiState = maximized
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingUseSequenceOptions = False
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingSoundCompleted =
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingTrialExpiredShown = False
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingTemperHumColor = Grey
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingDataDirectory =
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingCanonFileFormat = Single Image (CFA FITS)
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingAlnitakComPort =
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingIgRenameFiles = False
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingPhd2InstallPath =
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingSubFolder = True
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingLastSGSaveFolder =
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingNikonDataFormat = FITS
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingPlaySounds = False
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingLastNikonType = Auto Connect
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingLastSequenceStart = 1/1/0001 12:00:00 AM
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingLastAscomTelescope =
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingMdiPhdScale = 100
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingIgRenameType = 0
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingTemperHumUserHumidityComp = 0
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingMdiPhdRaColor = Color [Blue]
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingLastImageSaveFolder =
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingIgOverwriteExisting = False
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingFinishFullEvent = True
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingMosaicOverlap = 20
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingQSIFanOffWithTec = False
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingRecentSequences =
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingDefaultDirectory =
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingMdiPhdDecColor = Color [Red]
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingAstrometryNetEndpoint = Astrometry.NET (Remote)
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingFliFlushHigh = 0
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingStarsColor = Color [OrangeRed]
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingSBIGLpt3Address = 3BC
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingLastAscomFocuser =
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingIgLastFolder =
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: WindowGeometryOpen =
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingNumEvents = 5
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingDelayBetween = 0
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingCanonAfBinning = 1
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingPlateCamBlank =
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingNikonUseBulbModeAlways = False
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingTempFiles = C:\Temp
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingFliHighSpeedDesc =
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingSBIGCfwUseRS232 = False
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingRecoveryInterval = 10
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingEnableImageHistory = False
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingSBIGEthernetIP = 0.0.0.0
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingFliNormalSpeedDesc =
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingIgCopyLocation =
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingSBIGAutoDetectIp = True
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingAstroArtStartApp = True
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingSimDownloadTimesPlate = False
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingMicroTouchLocation =
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingEventAlwaysVisible = False
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingMdiNewWindow = False
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingTrialQuestionsAsked = False
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingFliRbiMitigation = False
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingGain = -1
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingLastAscomDome =
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingLookForTemperDevices = False
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingLastAscomRotator =
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] * SETTING: settingAfTestPackPath =
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] ASCOM Observing Conditions Hub (OCH)
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] ASCOM Observing Conditions Simulator
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] OpenWeatherMap ObservingConditions
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] TEMPerHUM
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] Performing initialization…
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] Creating new sequence with no profile
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] Performing full form reset (with default data)…
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] Retreiving new equipment objects…
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] New camera object (No Camera) dispatched…
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] New filter wheel object (No Filter Wheel) dispatched…
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] New environment device object (No Environment Device) dispatched…
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] New focuser object (No Focuser) dispatched…
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] New telescope object (No Telescope) dispatched…
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] New rotator object (No Rotator) dispatched…
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] New dome object (No Observatory) dispatched…
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] New flat box object (No Flat Box) dispatched…
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] New safety monitor object (No Safety Monitor) dispatched…
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] New auto guider object (No Auto Guider) dispatched…
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] New plate solver object (No Plate Solver) dispatched…
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] Populating the form controls…
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] Added row 0…
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] Added row 1…
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] Added row 2…
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] Added row 3…
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] Added row 4…
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] Loading custom filter names…
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] PopulateDataModel: Transferring view to the data model…
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] Retreiving new equipment objects…
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] New camera object (No Camera) dispatched…
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] New filter wheel object (No Filter Wheel) dispatched…
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] New environment device object (No Environment Device) dispatched…
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] New focuser object (No Focuser) dispatched…
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] New telescope object (No Telescope) dispatched…
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] New rotator object (No Rotator) dispatched…
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] New dome object (No Observatory) dispatched…
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] New flat box object (No Flat Box) dispatched…
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] New safety monitor object (No Safety Monitor) dispatched…
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] New auto guider object (No Auto Guider) dispatched…
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] New plate solver object (No Plate Solver) dispatched…
[7/30/2017 9:29:06 PM] [DEBUG] [Main Thread] Checking if version check is required…
[7/30/2017 9:29:06 PM] [DEBUG] [Sequence Thread] Entering sequence message dispatch loop…
[7/30/2017 9:29:07 PM] [DEBUG] [Cleaner Thread] Running cleanup…
[7/30/2017 9:29:07 PM] [DEBUG] [Cleaner Thread] Cleaning 0 files in directory C:\Users\Owner\AppData\Local\SequenceGenerator\Temp.…
[7/30/2017 9:29:07 PM] [DEBUG] [Cleaner Thread] Cleaning multi camera registration file…
[7/30/2017 9:29:07 PM] [DEBUG] [Cleaner Thread] Cleaning finished…
[7/30/2017 9:29:07 PM] [DEBUG] [Main Thread] UI layout found, loading layout at C:\Users\Owner\AppData\Local\SequenceGenerator\sg_ui_config.xml
[7/30/2017 9:29:12 PM] [DEBUG] [Sequence Thread] Dispatch loop: Received SGM_TERMINATE…
[7/30/2017 9:29:12 PM] [DEBUG] [Filter Wheel Thread] Filter Wheel Dispatch loop: Received SGM_TERMINATE…
[7/30/2017 9:29:12 PM] [DEBUG] [Camera Thread] Camera Dispatch loop: Received SGM_TERMINATE…
[7/30/2017 9:29:12 PM] [DEBUG] [TEC Thread] TEC Dispatch loop: Received SGM_TERMINATE…
[7/30/2017 9:29:12 PM] [DEBUG] [Focuser Thread] Focuser Dispatch loop: Received SGM_TERMINATE…
[7/30/2017 9:29:12 PM] [DEBUG] [Auto Guider Thread] Auto Guider Dispatch loop: Received SGM_TERMINATE…
[7/30/2017 9:29:12 PM] [DEBUG] [Telescope Thread] Telescope Dispatch loop: Received SGM_TERMINATE…
[7/30/2017 9:29:12 PM] [DEBUG] [Main Thread] Performing clean up…

Also, I am not sure if this is the correct one.

Thanks,

Jami