SGPro 3 and new Canons


#1

If you have been waiting for SGPro to be compatible with your new Canon Camera (Digic 7), we are targeting end of October for this addition.


#2

It’s been a few months. Is there any news about support for newer Canon Cameras? I’ve looked at the release notes and didn’t see anything about it. Also will the support be added to v.2.6 or just v.3.0?

Tks


#3

Steve,
At the moment it will likely just be 3.0 but we may decide to put it into 2.6 as well. We had hoped to have this out about a month ago but ran into some issues updating to the new drivers.

Thanks,
Jared


#4

Thank you for 3.0.0.4 upgraded Canon support!


#5

Please let me know how that works out. There was pretty minimal testing done as we only have a few cameras. We still have an issue with the 6D and live view. For whatever reason the 6D takes FOREVER (ok, about 5 seconds) to enter live view and something is timing out during that process.

Thanks,
Jared


#6

Every once in a while with Frame & Focus I get the error you can see in the attached image.

I get the error, but the correct image then displays so it looks like it isn’t anything really bad.

From the log file:
12/16/17 12:19:19.204][DEBUG] [Camera Thread] SGM_FRAME_AND_FOCUS message received…
[12/16/17 12:19:19.206][DEBUG] [Camera Thread] EOS camera: frame and focus…
[12/16/17 12:19:19.254][DEBUG] [Camera Thread] Canon: Setting ISO to: 100
[12/16/17 12:19:19.254][DEBUG] [Camera Thread] Canon: ISO look val: 72
[12/16/17 12:19:19.261][DEBUG] [Main Thread] Canon: PropertyEventHandler: event 101, property 40A, parameter 0,
[12/16/17 12:19:19.262][DEBUG] [Main Thread] Canon: PropertyEventHandler: event 101, property B, parameter 0,
[12/16/17 12:19:19.262][DEBUG] [Main Thread] Canon: PropertyEventHandler: event 101, property 40A, parameter 0,
[12/16/17 12:19:19.262][DEBUG] [Main Thread] Canon: PropertyEventHandler: event 101, property B, parameter 0,
[12/16/17 12:19:19.262][DEBUG] [Main Thread] Canon: PropertyEventHandler: event 101, property 40A, parameter 0,
[12/16/17 12:19:19.262][DEBUG] [Main Thread] Canon: PropertyEventHandler: event 101, property 40A, parameter 0,
[12/16/17 12:19:19.262][DEBUG] [Canon Download Thread] Canon: ObjectEventHandler: event 201, ref 255966184
[12/16/17 12:19:19.281][DEBUG] [Camera Thread] Canon: Exposing for 0.01 seconds…
[12/16/17 12:19:19.519][DEBUG] [Main Thread] Canon: PropertyEventHandler: event 101, property 402, parameter 0,
[12/16/17 12:19:19.519][DEBUG] [Main Thread] Canon: PropertyEventHandler: event 101, property 402, parameter 0,
[12/16/17 12:19:19.519][DEBUG] [Main Thread] Canon: PropertyEventHandler: event 101, property 404, parameter 0,
[12/16/17 12:19:19.852][DEBUG] [Main Thread] Canon: PropertyEventHandler: event 101, property 100, parameter 0,
[12/16/17 12:19:19.852][DEBUG] [Main Thread] Canon: PropertyEventHandler: event 101, property 40A, parameter 0,
[12/16/17 12:19:19.852][DEBUG] [Canon Download Thread] Canon: ObjectEventHandler: event 201, ref 255966184
[12/16/17 12:19:20.290][DEBUG] [Canon Download Thread] Canon: Directory Item Requested Transfer
[12/16/17 12:19:20.291][DEBUG] [Canon Download Thread] – Event delay: 776 ms
[12/16/17 12:19:20.291][DEBUG] [Canon Download Thread] Canon: Directory Item Requested Transfer
[12/16/17 12:19:20.291][DEBUG] [Canon Download Thread] – Event delay: 776 ms
[12/16/17 12:19:22.158][DEBUG] [Canon Download Thread] --------------> getCapturedItem time: 1867 ms
[12/16/17 12:19:22.518][DEBUG] [Camera Thread] Created full file name (file does not exist): .fit
[12/16/17 12:19:22.518][DEBUG] [Camera Thread] Extracting RAW data…
[12/16/17 12:19:22.518][DEBUG] [Camera Thread] RAW arg data: -D -T -4 -W -v -t 0 “C:\Users\Steve\AppData\Local\SequenceGenerator\Temp\cannonRaw-0.tmp”
[12/16/17 12:19:22.553][DEBUG] [Camera Thread] DCRAW Physical Memory Usage: 1847296
[12/16/17 12:19:23.058][DEBUG] [Camera Thread] DCRAW Physical Memory Usage: 16887808
[12/16/17 12:19:23.561][DEBUG] [Camera Thread] DCRAW Physical Memory Usage: 30683136
[12/16/17 12:19:24.063][DEBUG] [Camera Thread] DCRAW Physical Memory Usage: 44666880
[12/16/17 12:19:24.567][DEBUG] [Camera Thread] DCRAW Physical Memory Usage: 198660096
[12/16/17 12:19:25.069][DEBUG] [Camera Thread] DCRAW Physical Memory Usage: 207671296
[12/16/17 12:19:25.570][DEBUG] [Camera Thread] Done extracting RAW data, checking for success…
[12/16/17 12:19:25.570][DEBUG] [Camera Thread] RAW data extraction is good…
[12/16/17 12:19:25.570][DEBUG] [Camera Thread] Extracting bitmap data from RAW (tiff)…
[12/16/17 12:19:25.628][DEBUG] [Camera Thread] Creating bitmap (6288,4056)…
[12/16/17 12:19:25.637][DEBUG] [Camera Thread] Locking bitmap for write
[12/16/17 12:19:25.637][DEBUG] [Camera Thread] RAW bith depth: 16
[12/16/17 12:19:25.726][DEBUG] [Camera Thread] Internal Interface: Set Preview…
[12/16/17 12:19:25.726][DEBUG] [Camera Thread] Display image preview using asynch task…
[12/16/17 12:19:27.532][DEBUG] [Camera Thread] SGM_FRAME_AND_FOCUS complete…
[12/16/17 12:19:27.786][DEBUG] [Canon Download Thread] Canon: Error in EdsCreateFileStream. Error: EDS_ERR_FILE_ALREADY_EXISTS
[12/16/17 12:19:27.786][DEBUG] [Canon Download Thread] --------------> getCapturedItem time: 7495 ms


#7

@Steve_Boerner what camera and is this just with 3.0.0.5?

Thanks,
Jared


#8

It was with a T7i using 3.0.0.4.


www.mainsequencesoftware.com