Hi,
SGP/PHD did not complete first target, and there seems to be no recovery and or issue with PHD that I could see.
So I had programmed 2 targets, 2x24, after frame 16 of first target it seems the sequence aborted due to issue I guess with PHD, but I can’t see the root cause, also autorecovery did not kick in … so only 16 frames … and then nothing, no error dialogs in SGP and or PHD.
The night before I did one target even with meridian flip, no issues encountered.
At 1:38 something happened to PHD. It looks like the guider stopped exposing but it seems that PHD thought it was still replying to requests although SGP doesn’t seem to get these request back.
So, I’m not sure what the actual root cause is but it does appear PHD stopped guiding for some reason. A normal PHD exposure looks like this:
It seems as if the exposure never completes for whatever reason and then PHD stops replying to SGP. Or something along those lines. PHD claims it’s still replying but SGP seems to think it’s dead.
There appears to be an error communicating with your main camera. This seems to be the root cause of the sequence failure (I don’t see any issues with PHD2, but maybe I am missing something).
[5/14/2015 1:37:20 AM] [DEBUG] [Camera Thread] Canon: Error in CameraCommand_BulbStart (2) Error: EDS_ERR_INVALID_HANDLE
[5/14/2015 1:37:20 AM] [DEBUG] [Camera Thread] Error while attempting to capture frame...
There is no recovery mode for camera failure (the sequence will always terminate)
Thanks for the feedback,
it’s probably indeed a connection issue to the camera that initiated the error.
Will update to the latest version.
Hmmm, strange about the recovery, it was off when I updated from 2.3 but I re-checked that last night, maybe it’s didn’t stick,
I’ll verify again.
/Yves