[02/27/19 20:58:21.060][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 20:58:21.060][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 20:58:21.060][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:0; f:12; o:
[02/27/19 20:58:21.061][DEBUG] [Sequence Thread] EventMarker 18 - t:m81 (1); e:0; f:12; o:
[02/27/19 20:58:21.066][DEBUG] [Sequence Thread] EventMarker 19 - t:m81 (1); e:0; f:13; o:
[02/27/19 20:58:21.067][DEBUG] [Sequence Thread] EventMarker 20 - t:m81 (1); e:0; f:13; o:
[02/27/19 20:58:21.067][DEBUG] [Sequence Thread] Running post event...
[02/27/19 20:58:21.067][DEBUG] [Sequence Thread] EventMarker 21 - t:m81 (1); e:0; f:13; o:
[02/27/19 20:58:21.095][DEBUG] [Sequence Thread] Incremented numComplete (13) for event[0]...
[02/27/19 20:58:21.100][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 20:58:21.100][DEBUG] [Sequence Thread] Current event[0] frame count: 13/60...
[02/27/19 20:58:21.100][DEBUG] [Sequence Thread] Looking at event[1]...
[02/27/19 20:58:21.100][DEBUG] [Sequence Thread] Found event event[1] with remaining frames.
[02/27/19 20:58:21.100][DEBUG] [Sequence Thread] Event[1] frame count: 5/60...
[02/27/19 20:58:21.100][DEBUG] [Sequence Thread] Getting next event (1)...
[02/27/19 20:58:21.100][DEBUG] [Sequence Thread] Checking for auto manual focus (post)...
[02/27/19 20:58:21.101][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 20:58:21.112][DEBUG] [Sequence Thread] Attempting to move to next event...
[02/27/19 20:58:21.112][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 20:58:21.112][DEBUG] [Sequence Thread] Current event[0] frame count: 13/60...
[02/27/19 20:58:21.112][DEBUG] [Sequence Thread] Looking at event[1]...
[02/27/19 20:58:21.112][DEBUG] [Sequence Thread] Found event event[1] with remaining frames.
[02/27/19 20:58:21.112][DEBUG] [Sequence Thread] Event[1] frame count: 5/60...
[02/27/19 20:58:21.112][DEBUG] [Sequence Thread] Getting next event (1)...
[02/27/19 20:58:21.112][DEBUG] [Sequence Thread] Running pre event...
[02/27/19 20:58:21.132][DEBUG] [Sequence Thread] Current target has end time at 28/02/2019 06:30:00
[02/27/19 20:58:21.132][DEBUG] [Sequence Thread] End time of next frame is at 27/02/2019 20:58:51
[02/27/19 20:58:21.132][DEBUG] [Sequence Thread] Target is still before end time, continuing...
[02/27/19 20:58:21.132][DEBUG] [Sequence Thread] Running capture event...
[02/27/19 20:58:21.134][DEBUG] [Sequence Thread] ------------- Starting capture frame for event[1] -------------
[02/27/19 20:58:21.139][DEBUG] [Sequence Thread] Sending commands...
[02/27/19 20:58:21.139][DEBUG] [Sequence Thread] SetFlatBox: Frame Type is Light
[02/27/19 20:58:21.139][DEBUG] [Sequence Thread] EventMarker 2 - t:m81 (1); e:1; f:5; o:
[02/27/19 20:58:21.139][DEBUG] [Sequence Thread] Checking if Meridian Flip is needed
[02/27/19 20:58:21.139][DEBUG] [Sequence Thread] Telescope is on the West side of the mount
[02/27/19 20:58:21.139][DEBUG] [Sequence Thread] Meridian Flip not needed, Hour Angle < Degrees Past To Flip: -41.7727266665497 < 0
[02/27/19 20:58:21.139][DEBUG] [Sequence Thread] EventMarker 3 - t:m81 (1); e:1; f:5; o:
[02/27/19 20:58:21.139][DEBUG] [Sequence Thread] EventMarker 4 - t:m81 (1); e:1; f:5; o:
[02/27/19 20:58:21.139][DEBUG] [Sequence Thread] Setting filter position 1...
[02/27/19 20:58:21.139][DEBUG] [Sequence Thread] Filter position 1 is already set.  Skipping...
[02/27/19 20:58:21.139][DEBUG] [Sequence Thread] EventMarker 5 - t:m81 (1); e:1; f:5; o:
[02/27/19 20:58:21.139][DEBUG] [Sequence Thread] Checking for auto manual focus (pre)...
[02/27/19 20:58:21.139][DEBUG] [Sequence Thread] EventMarker 6 - t:m81 (1); e:1; f:5; o:
[02/27/19 20:58:21.142][DEBUG] [Sequence Thread] Autoguider will not dither this frame. Total frames is not a modulus of 5
[02/27/19 20:58:21.142][DEBUG] [Sequence Thread] EventMarker 1 - t:m81 (1); e:1; f:5; o:
[02/27/19 20:58:21.143][DEBUG] [Sequence Thread] Created base name for frame capture: m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_205821_frame6_-15C
[02/27/19 20:58:21.143][DEBUG] [Sequence Thread] Created directory for frame capture: C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\
[02/27/19 20:58:21.143][DEBUG] [Sequence Thread] EventMarker 7 - t:m81 (1); e:1; f:5; o:
[02/27/19 20:58:21.143][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 20:58:21.143][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:1; f:5; o:
[02/27/19 20:58:21.143][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 20:58:21.143][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 20:58:21.143][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 20:58:21.243][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 20:58:21.243][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 20:58:21.243][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:1; f:5; o:
[02/27/19 20:58:21.244][DEBUG] [Sequence Thread] {"method": "guide", "params": [{"pixels": 0.5, "time": 1, "timeout": 600}, false ], "id": 1003}
[02/27/19 20:58:21.244][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "guide", "params": [{"pixels": 0.5, "time": 1, "timeout": 600}, false ], "id": 1003}

[02/27/19 20:58:21.244][DEBUG] [Sequence Thread] EventMarker 172 - t:m81 (1); e:1; f:5; o:
[02/27/19 20:58:21.244][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 20:58:21.244][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 20:58:21.244][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 20:58:21.301][DEBUG] [PHD2 Listener Thread] Unknown object from PHD2: {"Event":"SettleBegin","Timestamp":1551301101.252,"Host":"JGL2_2","Inst":1}
[02/27/19 20:58:21.345][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 20:58:21.345][DEBUG] [Sequence Thread] EventMarker 173 - t:m81 (1); e:1; f:5; o:
[02/27/19 20:58:21.345][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Attempting to settle the auto guider...
[02/27/19 20:58:21.345][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Attempting to settle the auto guider...)...
[02/27/19 20:58:21.345][DEBUG] [Sequence Thread] Waiting for Auto Guider distance to fall below 0.5
[02/27/19 20:58:21.345][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 20:58:21.345][DEBUG] [Sequence Thread] PHD2 distance request returned 0.2...
[02/27/19 20:58:21.354][DEBUG] [Sequence Thread] Distance is below 0.5, starting timer...
[02/27/19 20:58:21.855][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 20:58:21.855][DEBUG] [Sequence Thread] PHD2 distance request returned 0.2...
[02/27/19 20:58:22.366][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 20:58:22.366][DEBUG] [Sequence Thread] PHD2 distance request returned 0.2...
[02/27/19 20:58:22.371][DEBUG] [Sequence Thread] Distance stayed below 0.5 for 1 seconds, done settling...
[02/27/19 20:58:22.372][DEBUG] [Sequence Thread] SGPro settle criteria have been met, but the guider reports it is not ready to resume, waiting...
[02/27/19 20:58:24.330][DEBUG] [PHD2 Listener Thread] PHD2: Settle done received: GOOD
[02/27/19 20:58:24.380][DEBUG] [Sequence Thread] Auto guider has settled...
[02/27/19 20:58:24.380][DEBUG] [Sequence Thread] EventMarker 8 - t:m81 (1); e:1; f:5; o:
[02/27/19 20:58:24.380][DEBUG] [Sequence Thread] EventMarker 9 - t:m81 (1); e:1; f:5; o:
[02/27/19 20:58:24.380][DEBUG] [Sequence Thread] EventMarker 10 - t:m81 (1); e:1; f:5; o:
[02/27/19 20:58:24.380][DEBUG] [Sequence Thread] Finished sending frame capture.  Entering wait mode...
[02/27/19 20:58:24.380][DEBUG] [Sequence Thread] EventMarker 11 - t:m81 (1); e:1; f:5; o:
[02/27/19 20:58:24.381][DEBUG] [Sequence Thread] EventMarker 12 - t:m81 (1); e:1; f:5; o:
[02/27/19 20:58:24.383][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE message received...
[02/27/19 20:58:24.386][DEBUG] [Camera Thread] SetAscomGain to 76
[02/27/19 20:58:24.387][DEBUG] [Camera Thread] Camera gain set to 76
[02/27/19 20:58:24.387][DEBUG] [Camera Thread] SetAscomNormalSpeed... 
[02/27/19 20:58:24.387][DEBUG] [Camera Thread] Cannot set readout speed, not supported by camera...
[02/27/19 20:58:24.393][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Starting integration of m81; Event 2; Frame 6 for 30s...
[02/27/19 20:58:24.393][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Starting integration of m81; Event 2; Frame 6 for 30s...)...
[02/27/19 20:58:24.394][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, TimedError): (2019-02-25) Failure while integrating m81; Event 2; Frame 6 for 30s. Image has not downloaded in alloted time period.
[02/27/19 20:58:24.394][DEBUG] [Sequence Thread] GNS: Sent timed event to GNS...
[02/27/19 20:58:24.395][DEBUG] [Sequence Thread] EventMarker 13 - t:m81 (1); e:1; f:5; o:
[02/27/19 20:58:54.435][DEBUG] [Sequence Thread] EventMarker 15 - t:m81 (1); e:1; f:5; o:
[02/27/19 20:58:54.439][DEBUG] [Sequence Thread] Waking from exposure time sleep period...
[02/27/19 20:58:54.440][DEBUG] [Sequence Thread] Checking to see if the CCD has a temp...
[02/27/19 20:58:54.440][DEBUG] [Sequence Thread] Saving the CCD temp...
[02/27/19 20:58:54.451][DEBUG] [Sequence Thread] Entering super dangerous loop to await image completion...
[02/27/19 20:58:54.454][DEBUG] [Sequence Thread] EventMarker 16 - t:m81 (1); e:1; f:5; o:
[02/27/19 20:58:55.514][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE complete...
[02/27/19 20:58:55.974][DEBUG] [Sequence Thread] EventMarker 17 - t:m81 (1); e:1; f:5; o:
[02/27/19 20:58:55.974][DEBUG] [Sequence Thread] Image reported as complete.  Continuing...
[02/27/19 20:58:55.975][DEBUG] [Sequence Thread] Collecting FITs headers...
[02/27/19 20:58:55.976][DEBUG] [Sequence Thread] ASCOM Camera: Could not get last exposure start time.  Reported as (unknown)
[02/27/19 20:58:55.976][DEBUG] [Sequence Thread] DATE-LOC time provided by SGPro (failed to retrieve valid entry from camera)...
[02/27/19 20:58:55.977][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info for last solve...
[02/27/19 20:58:55.977][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info from UI...
[02/27/19 20:58:55.978][DEBUG] [Sequence Thread] Clearing timed monitoring events...
[02/27/19 20:58:55.984][DEBUG] [Sequence Thread] Created full file name (file does not exist): C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_205821_frame6_-15C.fit
[02/27/19 20:58:55.984][DEBUG] [Sequence Thread] SaveFileAscom: Start...
[02/27/19 20:58:55.984][DEBUG] [Sequence Thread] SaveFileAscom: Checking image data...
[02/27/19 20:58:55.984][DEBUG] [Sequence Thread] SaveFileAscom: Create normal preview bitmap...
[02/27/19 20:58:55.992][DEBUG] [Sequence Thread] SaveFileAscom: Locking preview bits...
[02/27/19 20:58:55.992][DEBUG] [Sequence Thread] SaveFileAscom: Validating file name...
[02/27/19 20:58:55.992][DEBUG] [Sequence Thread] SaveFileAscom: Starting byte traversal...
[02/27/19 20:58:56.171][DEBUG] [Sequence Thread] SaveFileAscom: Unlocking preview bits...
[02/27/19 20:58:56.172][DEBUG] [Sequence Thread] SaveFileAscom: Saving preview bitmap to disk...
[02/27/19 20:58:56.172][DEBUG] [Sequence Thread] SaveFileBmp16: Locking bitmap for disk write...
[02/27/19 20:58:56.172][DEBUG] [Sequence Thread] SaveFileBmp16: Opening file stream...
[02/27/19 20:58:56.180][DEBUG] [Sequence Thread] SaveFileBmp16: Writing FITS headers...
[02/27/19 20:58:56.181][DEBUG] [Sequence Thread] SaveFileBmp16: Traversing and persisting bitmap data...
[02/27/19 20:58:56.347][DEBUG] [Sequence Thread] SaveFileBmp16: FITS block fill...
[02/27/19 20:58:56.347][DEBUG] [Sequence Thread] SaveFileBmp16: Unlocking bitmap...
[02/27/19 20:58:56.347][DEBUG] [Sequence Thread] SaveFileBmp16: Closing file stream
[02/27/19 20:58:56.351][DEBUG] [Sequence Thread] SaveFileAscom: Displaying image preview in UI...
[02/27/19 20:58:56.351][DEBUG] [Sequence Thread] Internal Interface: Set Preview...
[02/27/19 20:58:56.351][DEBUG] [Sequence Thread] Display image preview using asynch task...
[02/27/19 20:58:56.714][DEBUG] [Main Thread] --> Find stars (normal)
[02/27/19 20:58:56.800][DEBUG] [Main Thread] AF frame was too large... downsample = 0.5...
[02/27/19 20:58:58.545][DEBUG] [Main Thread] Star detection using min star size of 3px...
[02/27/19 20:58:58.545][DEBUG] [Main Thread] Star detection using max star size of 60px...
[02/27/19 20:58:58.594][DEBUG] [Main Thread] Find stars took: 1880 ms...
[02/27/19 20:58:58.594][DEBUG] [Main Thread] Star list contains 209 stars...
[02/27/19 20:58:58.594][DEBUG] [Main Thread] Calculating HFR with sample size: 6
[02/27/19 20:58:59.365][DEBUG] [Sequence Thread] SaveFileAscom: Done
[02/27/19 20:58:59.365][DEBUG] [Sequence Thread] =========== Save file took 3387 ms
[02/27/19 20:58:59.365][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_205821_frame6_-15C.fit" saved.  HFR = 2.67.
[02/27/19 20:58:59.365][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_205821_frame6_-15C.fit" saved.  HFR = 2.67.)...
[02/27/19 20:58:59.369][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 20:58:59.369][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:1; f:5; o:
[02/27/19 20:58:59.369][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 20:58:59.369][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 20:58:59.369][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 20:58:59.470][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 20:58:59.470][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 20:58:59.470][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:1; f:5; o:
[02/27/19 20:58:59.470][DEBUG] [Sequence Thread] EventMarker 18 - t:m81 (1); e:1; f:5; o:
[02/27/19 20:58:59.476][DEBUG] [Sequence Thread] EventMarker 19 - t:m81 (1); e:1; f:6; o:
[02/27/19 20:58:59.476][DEBUG] [Sequence Thread] EventMarker 20 - t:m81 (1); e:1; f:6; o:
[02/27/19 20:58:59.476][DEBUG] [Sequence Thread] Running post event...
[02/27/19 20:58:59.476][DEBUG] [Sequence Thread] EventMarker 21 - t:m81 (1); e:1; f:6; o:
[02/27/19 20:58:59.478][DEBUG] [Sequence Thread] Incremented numComplete (6) for event[1]...
[02/27/19 20:58:59.479][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 20:58:59.479][DEBUG] [Sequence Thread] Current event[1] frame count: 6/60...
[02/27/19 20:58:59.479][DEBUG] [Sequence Thread] Looking at event[2]...
[02/27/19 20:58:59.479][DEBUG] [Sequence Thread] Found event event[2] with remaining frames.
[02/27/19 20:58:59.479][DEBUG] [Sequence Thread] Event[2] frame count: 6/30...
[02/27/19 20:58:59.479][DEBUG] [Sequence Thread] Getting next event (2)...
[02/27/19 20:58:59.479][DEBUG] [Sequence Thread] Checking for auto manual focus (post)...
[02/27/19 20:58:59.479][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 20:58:59.491][DEBUG] [Sequence Thread] Attempting to move to next event...
[02/27/19 20:58:59.491][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 20:58:59.491][DEBUG] [Sequence Thread] Current event[1] frame count: 6/60...
[02/27/19 20:58:59.491][DEBUG] [Sequence Thread] Looking at event[2]...
[02/27/19 20:58:59.491][DEBUG] [Sequence Thread] Found event event[2] with remaining frames.
[02/27/19 20:58:59.491][DEBUG] [Sequence Thread] Event[2] frame count: 6/30...
[02/27/19 20:58:59.491][DEBUG] [Sequence Thread] Getting next event (2)...
[02/27/19 20:58:59.491][DEBUG] [Sequence Thread] Running pre event...
[02/27/19 20:58:59.504][DEBUG] [Sequence Thread] Current target has end time at 28/02/2019 06:30:00
[02/27/19 20:58:59.504][DEBUG] [Sequence Thread] End time of next frame is at 27/02/2019 21:00:29
[02/27/19 20:58:59.504][DEBUG] [Sequence Thread] Target is still before end time, continuing...
[02/27/19 20:58:59.504][DEBUG] [Sequence Thread] Running capture event...
[02/27/19 20:58:59.506][DEBUG] [Sequence Thread] ------------- Starting capture frame for event[2] -------------
[02/27/19 20:58:59.520][DEBUG] [Sequence Thread] Sending commands...
[02/27/19 20:58:59.520][DEBUG] [Sequence Thread] SetFlatBox: Frame Type is Light
[02/27/19 20:58:59.520][DEBUG] [Sequence Thread] EventMarker 2 - t:m81 (1); e:2; f:6; o:
[02/27/19 20:58:59.520][DEBUG] [Sequence Thread] Checking if Meridian Flip is needed
[02/27/19 20:58:59.520][DEBUG] [Sequence Thread] Telescope is on the West side of the mount
[02/27/19 20:58:59.520][DEBUG] [Sequence Thread] Meridian Flip not needed, Hour Angle < Degrees Past To Flip: -41.6130015140523 < 0
[02/27/19 20:58:59.520][DEBUG] [Sequence Thread] EventMarker 3 - t:m81 (1); e:2; f:6; o:
[02/27/19 20:58:59.520][DEBUG] [Sequence Thread] EventMarker 4 - t:m81 (1); e:2; f:6; o:
[02/27/19 20:58:59.520][DEBUG] [Sequence Thread] Setting filter position 4...
[02/27/19 20:58:59.529][DEBUG] [Sequence Thread] Setting filter: Blue...
[02/27/19 20:58:59.529][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 1...
[02/27/19 20:58:59.529][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 1 is complete...
[02/27/19 20:58:59.732][DEBUG] [Sequence Thread] Adjust focuser pos per filter: Moving focsuer to focus position (64704)...
[02/27/19 20:58:59.732][DEBUG] [Sequence Thread] Adjust focuser pos per filter
[02/27/19 20:58:59.732][DEBUG] [Sequence Thread] Old filter: Lum; Focus pos: 64700
[02/27/19 20:58:59.732][DEBUG] [Sequence Thread] New filter: Blue; Focus pos: 64704
[02/27/19 20:58:59.732][DEBUG] [Sequence Thread] Pos delta: 4 steps
[02/27/19 20:58:59.732][DEBUG] [Sequence Thread] New position-> (current: 4848) + (delta: 4) = 4852
[02/27/19 20:58:59.732][DEBUG] [Sequence Thread] Focuser moving to 4852
[02/27/19 20:59:00.368][DEBUG] [Sequence Thread] Focuser move call complete
[02/27/19 20:59:00.381][DEBUG] [Sequence Thread] Focuser position matches requested position (4852), continuing...
[02/27/19 20:59:00.381][DEBUG] [Sequence Thread] focuser move is complete...
[02/27/19 20:59:00.382][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 2...
[02/27/19 20:59:03.384][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 2 complete...
[02/27/19 20:59:03.394][DEBUG] [Sequence Thread] EventMarker 5 - t:m81 (1); e:2; f:6; o:
[02/27/19 20:59:03.394][DEBUG] [Sequence Thread] Checking for auto manual focus (pre)...
[02/27/19 20:59:03.394][DEBUG] [Sequence Thread] EventMarker 6 - t:m81 (1); e:2; f:6; o:
[02/27/19 20:59:03.405][DEBUG] [Sequence Thread] Autoguider will not dither this frame. Total frames is not a modulus of 5
[02/27/19 20:59:03.405][DEBUG] [Sequence Thread] EventMarker 1 - t:m81 (1); e:2; f:6; o:
[02/27/19 20:59:03.405][DEBUG] [Sequence Thread] Created base name for frame capture: m81_Light_90sec_1x1__Blue_gain_76_2019-02-27_205903_frame7_-15C
[02/27/19 20:59:03.405][DEBUG] [Sequence Thread] Created directory for frame capture: C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\
[02/27/19 20:59:03.405][DEBUG] [Sequence Thread] EventMarker 7 - t:m81 (1); e:2; f:6; o:
[02/27/19 20:59:03.405][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 20:59:03.405][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:2; f:6; o:
[02/27/19 20:59:03.405][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 20:59:03.405][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 20:59:03.405][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 20:59:03.506][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 20:59:03.506][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 20:59:03.506][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:2; f:6; o:
[02/27/19 20:59:03.507][DEBUG] [Sequence Thread] {"method": "guide", "params": [{"pixels": 0.5, "time": 1, "timeout": 600}, false ], "id": 1003}
[02/27/19 20:59:03.507][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "guide", "params": [{"pixels": 0.5, "time": 1, "timeout": 600}, false ], "id": 1003}

[02/27/19 20:59:03.507][DEBUG] [Sequence Thread] EventMarker 172 - t:m81 (1); e:2; f:6; o:
[02/27/19 20:59:03.507][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 20:59:03.507][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 20:59:03.507][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 20:59:03.569][DEBUG] [PHD2 Listener Thread] Unknown object from PHD2: {"Event":"SettleBegin","Timestamp":1551301143.519,"Host":"JGL2_2","Inst":1}
[02/27/19 20:59:03.607][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 20:59:03.607][DEBUG] [Sequence Thread] EventMarker 173 - t:m81 (1); e:2; f:6; o:
[02/27/19 20:59:03.608][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Attempting to settle the auto guider...
[02/27/19 20:59:03.608][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Attempting to settle the auto guider...)...
[02/27/19 20:59:03.608][DEBUG] [Sequence Thread] Waiting for Auto Guider distance to fall below 0.5
[02/27/19 20:59:03.608][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 20:59:03.608][DEBUG] [Sequence Thread] PHD2 distance request returned 0.2...
[02/27/19 20:59:03.619][DEBUG] [Sequence Thread] Distance is below 0.5, starting timer...
[02/27/19 20:59:04.120][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 20:59:04.120][DEBUG] [Sequence Thread] PHD2 distance request returned 0.2...
[02/27/19 20:59:04.630][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 20:59:04.630][DEBUG] [Sequence Thread] PHD2 distance request returned 0.2...
[02/27/19 20:59:04.636][DEBUG] [Sequence Thread] Distance stayed below 0.5 for 1 seconds, done settling...
[02/27/19 20:59:04.636][DEBUG] [Sequence Thread] SGPro settle criteria have been met, but the guider reports it is not ready to resume, waiting...
[02/27/19 20:59:06.296][DEBUG] [PHD2 Listener Thread] PHD2: Settle done received: GOOD
[02/27/19 20:59:06.716][DEBUG] [Sequence Thread] Auto guider has settled...
[02/27/19 20:59:06.716][DEBUG] [Sequence Thread] EventMarker 8 - t:m81 (1); e:2; f:6; o:
[02/27/19 20:59:06.716][DEBUG] [Sequence Thread] EventMarker 9 - t:m81 (1); e:2; f:6; o:
[02/27/19 20:59:06.716][DEBUG] [Sequence Thread] EventMarker 10 - t:m81 (1); e:2; f:6; o:
[02/27/19 20:59:06.716][DEBUG] [Sequence Thread] Finished sending frame capture.  Entering wait mode...
[02/27/19 20:59:06.716][DEBUG] [Sequence Thread] EventMarker 11 - t:m81 (1); e:2; f:6; o:
[02/27/19 20:59:06.717][DEBUG] [Sequence Thread] EventMarker 12 - t:m81 (1); e:2; f:6; o:
[02/27/19 20:59:06.722][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE message received...
[02/27/19 20:59:06.723][DEBUG] [Camera Thread] SetAscomGain to 76
[02/27/19 20:59:06.723][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Starting integration of m81; Event 3; Frame 7 for 90s...
[02/27/19 20:59:06.723][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Starting integration of m81; Event 3; Frame 7 for 90s...)...
[02/27/19 20:59:06.724][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, TimedError): (2019-02-25) Failure while integrating m81; Event 3; Frame 7 for 90s. Image has not downloaded in alloted time period.
[02/27/19 20:59:06.724][DEBUG] [Sequence Thread] GNS: Sent timed event to GNS...
[02/27/19 20:59:06.724][DEBUG] [Camera Thread] Camera gain set to 76
[02/27/19 20:59:06.724][DEBUG] [Camera Thread] SetAscomNormalSpeed... 
[02/27/19 20:59:06.724][DEBUG] [Camera Thread] Cannot set readout speed, not supported by camera...
[02/27/19 20:59:06.726][DEBUG] [Sequence Thread] EventMarker 13 - t:m81 (1); e:2; f:6; o:
[02/27/19 20:59:11.959][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 20:59:11.973][DEBUG] [MF Update Thread] Performing serialize...
[02/27/19 21:00:36.773][DEBUG] [Sequence Thread] EventMarker 15 - t:m81 (1); e:2; f:6; o:
[02/27/19 21:00:36.776][DEBUG] [Sequence Thread] Waking from exposure time sleep period...
[02/27/19 21:00:36.776][DEBUG] [Sequence Thread] Checking to see if the CCD has a temp...
[02/27/19 21:00:36.776][DEBUG] [Sequence Thread] Saving the CCD temp...
[02/27/19 21:00:36.782][DEBUG] [Sequence Thread] Entering super dangerous loop to await image completion...
[02/27/19 21:00:36.784][DEBUG] [Sequence Thread] EventMarker 16 - t:m81 (1); e:2; f:6; o:
[02/27/19 21:00:37.810][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE complete...
[02/27/19 21:00:38.289][DEBUG] [Sequence Thread] EventMarker 17 - t:m81 (1); e:2; f:6; o:
[02/27/19 21:00:38.289][DEBUG] [Sequence Thread] Image reported as complete.  Continuing...
[02/27/19 21:00:38.289][DEBUG] [Sequence Thread] Collecting FITs headers...
[02/27/19 21:00:38.290][DEBUG] [Sequence Thread] ASCOM Camera: Could not get last exposure start time.  Reported as (unknown)
[02/27/19 21:00:38.290][DEBUG] [Sequence Thread] DATE-LOC time provided by SGPro (failed to retrieve valid entry from camera)...
[02/27/19 21:00:38.290][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info for last solve...
[02/27/19 21:00:38.290][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info from UI...
[02/27/19 21:00:38.291][DEBUG] [Sequence Thread] Clearing timed monitoring events...
[02/27/19 21:00:38.295][DEBUG] [Sequence Thread] Created full file name (file does not exist): C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\m81_Light_90sec_1x1__Blue_gain_76_2019-02-27_205903_frame7_-15C.fit
[02/27/19 21:00:38.295][DEBUG] [Sequence Thread] SaveFileAscom: Start...
[02/27/19 21:00:38.295][DEBUG] [Sequence Thread] SaveFileAscom: Checking image data...
[02/27/19 21:00:38.295][DEBUG] [Sequence Thread] SaveFileAscom: Create normal preview bitmap...
[02/27/19 21:00:38.301][DEBUG] [Sequence Thread] SaveFileAscom: Locking preview bits...
[02/27/19 21:00:38.301][DEBUG] [Sequence Thread] SaveFileAscom: Validating file name...
[02/27/19 21:00:38.301][DEBUG] [Sequence Thread] SaveFileAscom: Starting byte traversal...
[02/27/19 21:00:38.483][DEBUG] [Sequence Thread] SaveFileAscom: Unlocking preview bits...
[02/27/19 21:00:38.483][DEBUG] [Sequence Thread] SaveFileAscom: Saving preview bitmap to disk...
[02/27/19 21:00:38.483][DEBUG] [Sequence Thread] SaveFileBmp16: Locking bitmap for disk write...
[02/27/19 21:00:38.483][DEBUG] [Sequence Thread] SaveFileBmp16: Opening file stream...
[02/27/19 21:00:38.484][DEBUG] [Sequence Thread] SaveFileBmp16: Writing FITS headers...
[02/27/19 21:00:38.484][DEBUG] [Sequence Thread] SaveFileBmp16: Traversing and persisting bitmap data...
[02/27/19 21:00:38.648][DEBUG] [Sequence Thread] SaveFileBmp16: FITS block fill...
[02/27/19 21:00:38.648][DEBUG] [Sequence Thread] SaveFileBmp16: Unlocking bitmap...
[02/27/19 21:00:38.648][DEBUG] [Sequence Thread] SaveFileBmp16: Closing file stream
[02/27/19 21:00:38.649][DEBUG] [Sequence Thread] SaveFileAscom: Displaying image preview in UI...
[02/27/19 21:00:38.649][DEBUG] [Sequence Thread] Internal Interface: Set Preview...
[02/27/19 21:00:38.649][DEBUG] [Sequence Thread] Display image preview using asynch task...
[02/27/19 21:00:38.944][DEBUG] [Main Thread] --> Find stars (normal)
[02/27/19 21:00:39.031][DEBUG] [Main Thread] AF frame was too large... downsample = 0.5...
[02/27/19 21:00:40.606][DEBUG] [Main Thread] Star detection using min star size of 3px...
[02/27/19 21:00:40.606][DEBUG] [Main Thread] Star detection using max star size of 60px...
[02/27/19 21:00:40.650][DEBUG] [Main Thread] Find stars took: 1706 ms...
[02/27/19 21:00:40.650][DEBUG] [Main Thread] Star list contains 214 stars...
[02/27/19 21:00:40.650][DEBUG] [Main Thread] Calculating HFR with sample size: 6
[02/27/19 21:00:41.467][DEBUG] [Sequence Thread] SaveFileAscom: Done
[02/27/19 21:00:41.467][DEBUG] [Sequence Thread] =========== Save file took 3175 ms
[02/27/19 21:00:41.467][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Image "m81_Light_90sec_1x1__Blue_gain_76_2019-02-27_205903_frame7_-15C.fit" saved.  HFR = 2.64.
[02/27/19 21:00:41.467][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Image "m81_Light_90sec_1x1__Blue_gain_76_2019-02-27_205903_frame7_-15C.fit" saved.  HFR = 2.64.)...
[02/27/19 21:00:41.472][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:00:41.472][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:2; f:6; o:
[02/27/19 21:00:41.472][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:00:41.472][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:00:41.472][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:00:41.573][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:00:41.573][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:00:41.573][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:2; f:6; o:
[02/27/19 21:00:41.573][DEBUG] [Sequence Thread] EventMarker 18 - t:m81 (1); e:2; f:6; o:
[02/27/19 21:00:41.584][DEBUG] [Sequence Thread] EventMarker 19 - t:m81 (1); e:2; f:7; o:
[02/27/19 21:00:41.584][DEBUG] [Sequence Thread] EventMarker 20 - t:m81 (1); e:2; f:7; o:
[02/27/19 21:00:41.584][DEBUG] [Sequence Thread] Running post event...
[02/27/19 21:00:41.584][DEBUG] [Sequence Thread] EventMarker 21 - t:m81 (1); e:2; f:7; o:
[02/27/19 21:00:41.589][DEBUG] [Sequence Thread] Incremented numComplete (7) for event[2]...
[02/27/19 21:00:41.594][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:00:41.594][DEBUG] [Sequence Thread] Current event[2] frame count: 7/30...
[02/27/19 21:00:41.594][DEBUG] [Sequence Thread] Looking at event[3]...
[02/27/19 21:00:41.594][DEBUG] [Sequence Thread] Found event event[3] with remaining frames.
[02/27/19 21:00:41.594][DEBUG] [Sequence Thread] Event[3] frame count: 6/30...
[02/27/19 21:00:41.594][DEBUG] [Sequence Thread] Getting next event (3)...
[02/27/19 21:00:41.594][DEBUG] [Sequence Thread] Checking for auto manual focus (post)...
[02/27/19 21:00:41.594][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:00:41.606][DEBUG] [Sequence Thread] Attempting to move to next event...
[02/27/19 21:00:41.606][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:00:41.606][DEBUG] [Sequence Thread] Current event[2] frame count: 7/30...
[02/27/19 21:00:41.606][DEBUG] [Sequence Thread] Looking at event[3]...
[02/27/19 21:00:41.606][DEBUG] [Sequence Thread] Found event event[3] with remaining frames.
[02/27/19 21:00:41.606][DEBUG] [Sequence Thread] Event[3] frame count: 6/30...
[02/27/19 21:00:41.606][DEBUG] [Sequence Thread] Getting next event (3)...
[02/27/19 21:00:41.606][DEBUG] [Sequence Thread] Running pre event...
[02/27/19 21:00:41.629][DEBUG] [Sequence Thread] Current target has end time at 28/02/2019 06:30:00
[02/27/19 21:00:41.629][DEBUG] [Sequence Thread] End time of next frame is at 27/02/2019 21:02:11
[02/27/19 21:00:41.629][DEBUG] [Sequence Thread] Target is still before end time, continuing...
[02/27/19 21:00:41.629][DEBUG] [Sequence Thread] Running capture event...
[02/27/19 21:00:41.630][DEBUG] [Sequence Thread] ------------- Starting capture frame for event[3] -------------
[02/27/19 21:00:41.635][DEBUG] [Sequence Thread] Sending commands...
[02/27/19 21:00:41.635][DEBUG] [Sequence Thread] SetFlatBox: Frame Type is Light
[02/27/19 21:00:41.635][DEBUG] [Sequence Thread] EventMarker 2 - t:m81 (1); e:3; f:6; o:
[02/27/19 21:00:41.635][DEBUG] [Sequence Thread] Checking if Meridian Flip is needed
[02/27/19 21:00:41.635][DEBUG] [Sequence Thread] Telescope is on the West side of the mount
[02/27/19 21:00:41.635][DEBUG] [Sequence Thread] Meridian Flip not needed, Hour Angle < Degrees Past To Flip: -41.1853795157 < 0
[02/27/19 21:00:41.635][DEBUG] [Sequence Thread] EventMarker 3 - t:m81 (1); e:3; f:6; o:
[02/27/19 21:00:41.635][DEBUG] [Sequence Thread] EventMarker 4 - t:m81 (1); e:3; f:6; o:
[02/27/19 21:00:41.635][DEBUG] [Sequence Thread] Setting filter position 2...
[02/27/19 21:00:41.641][DEBUG] [Sequence Thread] Setting filter: Red...
[02/27/19 21:00:41.641][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 1...
[02/27/19 21:00:41.641][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 1 is complete...
[02/27/19 21:00:41.844][DEBUG] [Sequence Thread] Adjust focuser pos per filter: Moving focsuer to focus position (64697)...
[02/27/19 21:00:41.844][DEBUG] [Sequence Thread] Adjust focuser pos per filter
[02/27/19 21:00:41.844][DEBUG] [Sequence Thread] Old filter: Blue; Focus pos: 64704
[02/27/19 21:00:41.844][DEBUG] [Sequence Thread] New filter: Red; Focus pos: 64697
[02/27/19 21:00:41.844][DEBUG] [Sequence Thread] Pos delta: -7 steps
[02/27/19 21:00:41.844][DEBUG] [Sequence Thread] New position-> (current: 4852) + (delta: -7) = 4845
[02/27/19 21:00:41.844][DEBUG] [Sequence Thread] Focuser moving to 4845
[02/27/19 21:00:42.516][DEBUG] [Sequence Thread] Focuser move call complete
[02/27/19 21:00:42.526][DEBUG] [Sequence Thread] Focuser position matches requested position (4845), continuing...
[02/27/19 21:00:42.526][DEBUG] [Sequence Thread] focuser move is complete...
[02/27/19 21:00:42.527][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 2...
[02/27/19 21:00:45.530][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 2 complete...
[02/27/19 21:00:45.545][DEBUG] [Sequence Thread] EventMarker 5 - t:m81 (1); e:3; f:6; o:
[02/27/19 21:00:45.545][DEBUG] [Sequence Thread] Checking for auto manual focus (pre)...
[02/27/19 21:00:45.545][DEBUG] [Sequence Thread] EventMarker 6 - t:m81 (1); e:3; f:6; o:
[02/27/19 21:00:45.580][DEBUG] [Sequence Thread] Autoguider will not dither this frame. Total frames is not a modulus of 5
[02/27/19 21:00:45.580][DEBUG] [Sequence Thread] EventMarker 1 - t:m81 (1); e:3; f:6; o:
[02/27/19 21:00:45.580][DEBUG] [Sequence Thread] Created base name for frame capture: m81_Light_90sec_1x1__Red_gain_76_2019-02-27_210045_frame7_-15C
[02/27/19 21:00:45.581][DEBUG] [Sequence Thread] Created directory for frame capture: C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\
[02/27/19 21:00:45.581][DEBUG] [Sequence Thread] EventMarker 7 - t:m81 (1); e:3; f:6; o:
[02/27/19 21:00:45.581][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:00:45.581][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:3; f:6; o:
[02/27/19 21:00:45.581][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:00:45.581][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:00:45.581][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:00:45.682][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:00:45.682][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:00:45.682][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:3; f:6; o:
[02/27/19 21:00:45.682][DEBUG] [Sequence Thread] {"method": "guide", "params": [{"pixels": 0.5, "time": 1, "timeout": 600}, false ], "id": 1003}
[02/27/19 21:00:45.682][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "guide", "params": [{"pixels": 0.5, "time": 1, "timeout": 600}, false ], "id": 1003}

[02/27/19 21:00:45.682][DEBUG] [Sequence Thread] EventMarker 172 - t:m81 (1); e:3; f:6; o:
[02/27/19 21:00:45.682][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:00:45.682][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:00:45.682][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:00:45.763][DEBUG] [PHD2 Listener Thread] Unknown object from PHD2: {"Event":"SettleBegin","Timestamp":1551301245.714,"Host":"JGL2_2","Inst":1}
[02/27/19 21:00:45.783][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:00:45.783][DEBUG] [Sequence Thread] EventMarker 173 - t:m81 (1); e:3; f:6; o:
[02/27/19 21:00:45.784][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Attempting to settle the auto guider...
[02/27/19 21:00:45.784][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Attempting to settle the auto guider...)...
[02/27/19 21:00:45.784][DEBUG] [Sequence Thread] Waiting for Auto Guider distance to fall below 0.5
[02/27/19 21:00:45.784][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:00:45.784][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:00:45.792][DEBUG] [Sequence Thread] Distance is below 0.5, starting timer...
[02/27/19 21:00:46.293][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:00:46.293][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:00:46.800][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:00:46.800][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:00:46.805][DEBUG] [Sequence Thread] Distance stayed below 0.5 for 1 seconds, done settling...
[02/27/19 21:00:46.805][DEBUG] [Sequence Thread] SGPro settle criteria have been met, but the guider reports it is not ready to resume, waiting...
[02/27/19 21:00:48.292][DEBUG] [PHD2 Listener Thread] PHD2: Settle done received: GOOD
[02/27/19 21:00:48.499][DEBUG] [Sequence Thread] Auto guider has settled...
[02/27/19 21:00:48.499][DEBUG] [Sequence Thread] EventMarker 8 - t:m81 (1); e:3; f:6; o:
[02/27/19 21:00:48.499][DEBUG] [Sequence Thread] EventMarker 9 - t:m81 (1); e:3; f:6; o:
[02/27/19 21:00:48.499][DEBUG] [Sequence Thread] EventMarker 10 - t:m81 (1); e:3; f:6; o:
[02/27/19 21:00:48.499][DEBUG] [Sequence Thread] Finished sending frame capture.  Entering wait mode...
[02/27/19 21:00:48.499][DEBUG] [Sequence Thread] EventMarker 11 - t:m81 (1); e:3; f:6; o:
[02/27/19 21:00:48.501][DEBUG] [Sequence Thread] EventMarker 12 - t:m81 (1); e:3; f:6; o:
[02/27/19 21:00:48.501][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE message received...
[02/27/19 21:00:48.502][DEBUG] [Camera Thread] SetAscomGain to 76
[02/27/19 21:00:48.503][DEBUG] [Camera Thread] Camera gain set to 76
[02/27/19 21:00:48.503][DEBUG] [Camera Thread] SetAscomNormalSpeed... 
[02/27/19 21:00:48.503][DEBUG] [Camera Thread] Cannot set readout speed, not supported by camera...
[02/27/19 21:00:48.505][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Starting integration of m81; Event 4; Frame 7 for 90s...
[02/27/19 21:00:48.505][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Starting integration of m81; Event 4; Frame 7 for 90s...)...
[02/27/19 21:00:48.505][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, TimedError): (2019-02-25) Failure while integrating m81; Event 4; Frame 7 for 90s. Image has not downloaded in alloted time period.
[02/27/19 21:00:48.505][DEBUG] [Sequence Thread] GNS: Sent timed event to GNS...
[02/27/19 21:00:48.507][DEBUG] [Sequence Thread] EventMarker 13 - t:m81 (1); e:3; f:6; o:
[02/27/19 21:01:58.914][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:01:58.929][DEBUG] [MF Update Thread] Performing serialize...
[02/27/19 21:02:18.756][DEBUG] [Sequence Thread] EventMarker 15 - t:m81 (1); e:3; f:6; o:
[02/27/19 21:02:18.759][DEBUG] [Sequence Thread] Waking from exposure time sleep period...
[02/27/19 21:02:18.760][DEBUG] [Sequence Thread] Checking to see if the CCD has a temp...
[02/27/19 21:02:18.760][DEBUG] [Sequence Thread] Saving the CCD temp...
[02/27/19 21:02:18.765][DEBUG] [Sequence Thread] Entering super dangerous loop to await image completion...
[02/27/19 21:02:18.767][DEBUG] [Sequence Thread] EventMarker 16 - t:m81 (1); e:3; f:6; o:
[02/27/19 21:02:19.755][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE complete...
[02/27/19 21:02:20.004][DEBUG] [Sequence Thread] EventMarker 17 - t:m81 (1); e:3; f:6; o:
[02/27/19 21:02:20.004][DEBUG] [Sequence Thread] Image reported as complete.  Continuing...
[02/27/19 21:02:20.004][DEBUG] [Sequence Thread] Collecting FITs headers...
[02/27/19 21:02:20.005][DEBUG] [Sequence Thread] ASCOM Camera: Could not get last exposure start time.  Reported as (unknown)
[02/27/19 21:02:20.005][DEBUG] [Sequence Thread] DATE-LOC time provided by SGPro (failed to retrieve valid entry from camera)...
[02/27/19 21:02:20.007][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info for last solve...
[02/27/19 21:02:20.007][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info from UI...
[02/27/19 21:02:20.042][DEBUG] [Sequence Thread] Clearing timed monitoring events...
[02/27/19 21:02:20.054][DEBUG] [Sequence Thread] Created full file name (file does not exist): C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\m81_Light_90sec_1x1__Red_gain_76_2019-02-27_210045_frame7_-15C.fit
[02/27/19 21:02:20.054][DEBUG] [Sequence Thread] SaveFileAscom: Start...
[02/27/19 21:02:20.054][DEBUG] [Sequence Thread] SaveFileAscom: Checking image data...
[02/27/19 21:02:20.054][DEBUG] [Sequence Thread] SaveFileAscom: Create normal preview bitmap...
[02/27/19 21:02:20.060][DEBUG] [Sequence Thread] SaveFileAscom: Locking preview bits...
[02/27/19 21:02:20.061][DEBUG] [Sequence Thread] SaveFileAscom: Validating file name...
[02/27/19 21:02:20.061][DEBUG] [Sequence Thread] SaveFileAscom: Starting byte traversal...
[02/27/19 21:02:20.245][DEBUG] [Sequence Thread] SaveFileAscom: Unlocking preview bits...
[02/27/19 21:02:20.245][DEBUG] [Sequence Thread] SaveFileAscom: Saving preview bitmap to disk...
[02/27/19 21:02:20.245][DEBUG] [Sequence Thread] SaveFileBmp16: Locking bitmap for disk write...
[02/27/19 21:02:20.245][DEBUG] [Sequence Thread] SaveFileBmp16: Opening file stream...
[02/27/19 21:02:20.254][DEBUG] [Sequence Thread] SaveFileBmp16: Writing FITS headers...
[02/27/19 21:02:20.254][DEBUG] [Sequence Thread] SaveFileBmp16: Traversing and persisting bitmap data...
[02/27/19 21:02:20.422][DEBUG] [Sequence Thread] SaveFileBmp16: FITS block fill...
[02/27/19 21:02:20.422][DEBUG] [Sequence Thread] SaveFileBmp16: Unlocking bitmap...
[02/27/19 21:02:20.422][DEBUG] [Sequence Thread] SaveFileBmp16: Closing file stream
[02/27/19 21:02:20.426][DEBUG] [Sequence Thread] SaveFileAscom: Displaying image preview in UI...
[02/27/19 21:02:20.426][DEBUG] [Sequence Thread] Internal Interface: Set Preview...
[02/27/19 21:02:20.426][DEBUG] [Sequence Thread] Display image preview using asynch task...
[02/27/19 21:02:21.011][DEBUG] [Main Thread] --> Find stars (normal)
[02/27/19 21:02:21.108][DEBUG] [Main Thread] AF frame was too large... downsample = 0.5...
[02/27/19 21:02:22.739][DEBUG] [Main Thread] Star detection using min star size of 3px...
[02/27/19 21:02:22.739][DEBUG] [Main Thread] Star detection using max star size of 60px...
[02/27/19 21:02:22.785][DEBUG] [Main Thread] Find stars took: 1773 ms...
[02/27/19 21:02:22.785][DEBUG] [Main Thread] Star list contains 208 stars...
[02/27/19 21:02:22.785][DEBUG] [Main Thread] Calculating HFR with sample size: 6
[02/27/19 21:02:23.093][DEBUG] [Sequence Thread] SaveFileAscom: Done
[02/27/19 21:02:23.093][DEBUG] [Sequence Thread] =========== Save file took 3050 ms
[02/27/19 21:02:23.093][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Image "m81_Light_90sec_1x1__Red_gain_76_2019-02-27_210045_frame7_-15C.fit" saved.  HFR = 2.68.
[02/27/19 21:02:23.093][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Image "m81_Light_90sec_1x1__Red_gain_76_2019-02-27_210045_frame7_-15C.fit" saved.  HFR = 2.68.)...
[02/27/19 21:02:23.099][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:02:23.099][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:3; f:6; o:
[02/27/19 21:02:23.099][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:02:23.099][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:02:23.099][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:02:23.200][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:02:23.200][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:02:23.200][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:3; f:6; o:
[02/27/19 21:02:23.237][DEBUG] [Sequence Thread] EventMarker 18 - t:m81 (1); e:3; f:6; o:
[02/27/19 21:02:23.240][DEBUG] [Sequence Thread] EventMarker 19 - t:m81 (1); e:3; f:7; o:
[02/27/19 21:02:23.240][DEBUG] [Sequence Thread] EventMarker 20 - t:m81 (1); e:3; f:7; o:
[02/27/19 21:02:23.240][DEBUG] [Sequence Thread] Running post event...
[02/27/19 21:02:23.240][DEBUG] [Sequence Thread] EventMarker 21 - t:m81 (1); e:3; f:7; o:
[02/27/19 21:02:23.245][DEBUG] [Sequence Thread] Incremented numComplete (7) for event[3]...
[02/27/19 21:02:23.246][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:02:23.246][DEBUG] [Sequence Thread] Current event[3] frame count: 7/30...
[02/27/19 21:02:23.246][DEBUG] [Sequence Thread] Looking at event[4]...
[02/27/19 21:02:23.246][DEBUG] [Sequence Thread] Found event event[4] with remaining frames.
[02/27/19 21:02:23.246][DEBUG] [Sequence Thread] Event[4] frame count: 6/30...
[02/27/19 21:02:23.246][DEBUG] [Sequence Thread] Getting next event (4)...
[02/27/19 21:02:23.246][DEBUG] [Sequence Thread] Checking for auto manual focus (post)...
[02/27/19 21:02:23.246][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:02:23.260][DEBUG] [Sequence Thread] Attempting to move to next event...
[02/27/19 21:02:23.261][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:02:23.261][DEBUG] [Sequence Thread] Current event[3] frame count: 7/30...
[02/27/19 21:02:23.261][DEBUG] [Sequence Thread] Looking at event[4]...
[02/27/19 21:02:23.261][DEBUG] [Sequence Thread] Found event event[4] with remaining frames.
[02/27/19 21:02:23.261][DEBUG] [Sequence Thread] Event[4] frame count: 6/30...
[02/27/19 21:02:23.261][DEBUG] [Sequence Thread] Getting next event (4)...
[02/27/19 21:02:23.261][DEBUG] [Sequence Thread] Running pre event...
[02/27/19 21:02:23.342][DEBUG] [Sequence Thread] Current target has end time at 28/02/2019 06:30:00
[02/27/19 21:02:23.342][DEBUG] [Sequence Thread] End time of next frame is at 27/02/2019 21:03:53
[02/27/19 21:02:23.342][DEBUG] [Sequence Thread] Target is still before end time, continuing...
[02/27/19 21:02:23.342][DEBUG] [Sequence Thread] Running capture event...
[02/27/19 21:02:23.344][DEBUG] [Sequence Thread] ------------- Starting capture frame for event[4] -------------
[02/27/19 21:02:23.347][DEBUG] [Sequence Thread] Sending commands...
[02/27/19 21:02:23.347][DEBUG] [Sequence Thread] SetFlatBox: Frame Type is Light
[02/27/19 21:02:23.347][DEBUG] [Sequence Thread] EventMarker 2 - t:m81 (1); e:4; f:6; o:
[02/27/19 21:02:23.347][DEBUG] [Sequence Thread] Checking if Meridian Flip is needed
[02/27/19 21:02:23.347][DEBUG] [Sequence Thread] Telescope is on the West side of the mount
[02/27/19 21:02:23.348][DEBUG] [Sequence Thread] Meridian Flip not needed, Hour Angle < Degrees Past To Flip: -40.7578294659767 < 0
[02/27/19 21:02:23.348][DEBUG] [Sequence Thread] EventMarker 3 - t:m81 (1); e:4; f:6; o:
[02/27/19 21:02:23.348][DEBUG] [Sequence Thread] EventMarker 4 - t:m81 (1); e:4; f:6; o:
[02/27/19 21:02:23.348][DEBUG] [Sequence Thread] Setting filter position 3...
[02/27/19 21:02:23.354][DEBUG] [Sequence Thread] Setting filter: Green...
[02/27/19 21:02:23.354][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 1...
[02/27/19 21:02:23.354][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 1 is complete...
[02/27/19 21:02:23.557][DEBUG] [Sequence Thread] Adjust focuser pos per filter: Moving focsuer to focus position (64679)...
[02/27/19 21:02:23.557][DEBUG] [Sequence Thread] Adjust focuser pos per filter
[02/27/19 21:02:23.557][DEBUG] [Sequence Thread] Old filter: Red; Focus pos: 64697
[02/27/19 21:02:23.557][DEBUG] [Sequence Thread] New filter: Green; Focus pos: 64679
[02/27/19 21:02:23.557][DEBUG] [Sequence Thread] Pos delta: -18 steps
[02/27/19 21:02:23.557][DEBUG] [Sequence Thread] New position-> (current: 4845) + (delta: -18) = 4827
[02/27/19 21:02:23.557][DEBUG] [Sequence Thread] Focuser moving to 4827
[02/27/19 21:02:24.342][DEBUG] [Sequence Thread] Focuser move call complete
[02/27/19 21:02:24.358][DEBUG] [Sequence Thread] Focuser position matches requested position (4827), continuing...
[02/27/19 21:02:24.358][DEBUG] [Sequence Thread] focuser move is complete...
[02/27/19 21:02:24.361][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 2...
[02/27/19 21:02:26.361][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 2 complete...
[02/27/19 21:02:26.378][DEBUG] [Sequence Thread] EventMarker 5 - t:m81 (1); e:4; f:6; o:
[02/27/19 21:02:26.378][DEBUG] [Sequence Thread] Checking for auto manual focus (pre)...
[02/27/19 21:02:26.378][DEBUG] [Sequence Thread] EventMarker 6 - t:m81 (1); e:4; f:6; o:
[02/27/19 21:02:26.387][DEBUG] [Sequence Thread] Autoguider will not dither this frame. Total frames is not a modulus of 5
[02/27/19 21:02:26.387][DEBUG] [Sequence Thread] EventMarker 1 - t:m81 (1); e:4; f:6; o:
[02/27/19 21:02:26.387][DEBUG] [Sequence Thread] Created base name for frame capture: m81_Light_90sec_1x1__Green_gain_76_2019-02-27_210226_frame7_-15C
[02/27/19 21:02:26.387][DEBUG] [Sequence Thread] Created directory for frame capture: C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\
[02/27/19 21:02:26.387][DEBUG] [Sequence Thread] EventMarker 7 - t:m81 (1); e:4; f:6; o:
[02/27/19 21:02:26.387][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:02:26.387][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:4; f:6; o:
[02/27/19 21:02:26.387][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:02:26.387][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:02:26.387][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:02:26.488][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:02:26.488][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:02:26.488][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:4; f:6; o:
[02/27/19 21:02:26.488][DEBUG] [Sequence Thread] {"method": "guide", "params": [{"pixels": 0.5, "time": 1, "timeout": 600}, false ], "id": 1003}
[02/27/19 21:02:26.488][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "guide", "params": [{"pixels": 0.5, "time": 1, "timeout": 600}, false ], "id": 1003}

[02/27/19 21:02:26.488][DEBUG] [Sequence Thread] EventMarker 172 - t:m81 (1); e:4; f:6; o:
[02/27/19 21:02:26.488][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:02:26.488][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:02:26.488][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:02:26.571][DEBUG] [PHD2 Listener Thread] Unknown object from PHD2: {"Event":"SettleBegin","Timestamp":1551301346.520,"Host":"JGL2_2","Inst":1}
[02/27/19 21:02:26.589][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:02:26.589][DEBUG] [Sequence Thread] EventMarker 173 - t:m81 (1); e:4; f:6; o:
[02/27/19 21:02:26.590][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Attempting to settle the auto guider...
[02/27/19 21:02:26.590][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Attempting to settle the auto guider...)...
[02/27/19 21:02:26.590][DEBUG] [Sequence Thread] Waiting for Auto Guider distance to fall below 0.5
[02/27/19 21:02:26.590][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:02:26.590][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:02:26.598][DEBUG] [Sequence Thread] Distance is below 0.5, starting timer...
[02/27/19 21:02:27.098][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:02:27.098][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:02:27.742][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:02:27.742][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:02:27.746][DEBUG] [Sequence Thread] Distance stayed below 0.5 for 1 seconds, done settling...
[02/27/19 21:02:27.746][DEBUG] [Sequence Thread] SGPro settle criteria have been met, but the guider reports it is not ready to resume, waiting...
[02/27/19 21:02:30.358][DEBUG] [PHD2 Listener Thread] PHD2: Settle done received: GOOD
[02/27/19 21:02:30.756][DEBUG] [Sequence Thread] Auto guider has settled...
[02/27/19 21:02:30.756][DEBUG] [Sequence Thread] EventMarker 8 - t:m81 (1); e:4; f:6; o:
[02/27/19 21:02:30.756][DEBUG] [Sequence Thread] EventMarker 9 - t:m81 (1); e:4; f:6; o:
[02/27/19 21:02:30.756][DEBUG] [Sequence Thread] EventMarker 10 - t:m81 (1); e:4; f:6; o:
[02/27/19 21:02:30.756][DEBUG] [Sequence Thread] Finished sending frame capture.  Entering wait mode...
[02/27/19 21:02:30.756][DEBUG] [Sequence Thread] EventMarker 11 - t:m81 (1); e:4; f:6; o:
[02/27/19 21:02:30.757][DEBUG] [Sequence Thread] EventMarker 12 - t:m81 (1); e:4; f:6; o:
[02/27/19 21:02:30.757][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE message received...
[02/27/19 21:02:30.758][DEBUG] [Camera Thread] SetAscomGain to 76
[02/27/19 21:02:30.759][DEBUG] [Camera Thread] Camera gain set to 76
[02/27/19 21:02:30.760][DEBUG] [Camera Thread] SetAscomNormalSpeed... 
[02/27/19 21:02:30.760][DEBUG] [Camera Thread] Cannot set readout speed, not supported by camera...
[02/27/19 21:02:30.767][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Starting integration of m81; Event 5; Frame 7 for 90s...
[02/27/19 21:02:30.767][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Starting integration of m81; Event 5; Frame 7 for 90s...)...
[02/27/19 21:02:30.767][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, TimedError): (2019-02-25) Failure while integrating m81; Event 5; Frame 7 for 90s. Image has not downloaded in alloted time period.
[02/27/19 21:02:30.767][DEBUG] [Sequence Thread] GNS: Sent timed event to GNS...
[02/27/19 21:02:30.768][DEBUG] [Sequence Thread] EventMarker 13 - t:m81 (1); e:4; f:6; o:
[02/27/19 21:03:27.264][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:03:27.280][DEBUG] [MF Update Thread] Performing serialize...
[02/27/19 21:04:00.838][DEBUG] [Sequence Thread] EventMarker 15 - t:m81 (1); e:4; f:6; o:
[02/27/19 21:04:00.841][DEBUG] [Sequence Thread] Waking from exposure time sleep period...
[02/27/19 21:04:00.841][DEBUG] [Sequence Thread] Checking to see if the CCD has a temp...
[02/27/19 21:04:00.841][DEBUG] [Sequence Thread] Saving the CCD temp...
[02/27/19 21:04:00.846][DEBUG] [Sequence Thread] Entering super dangerous loop to await image completion...
[02/27/19 21:04:00.848][DEBUG] [Sequence Thread] EventMarker 16 - t:m81 (1); e:4; f:6; o:
[02/27/19 21:04:01.983][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE complete...
[02/27/19 21:04:02.360][DEBUG] [Sequence Thread] EventMarker 17 - t:m81 (1); e:4; f:6; o:
[02/27/19 21:04:02.360][DEBUG] [Sequence Thread] Image reported as complete.  Continuing...
[02/27/19 21:04:02.360][DEBUG] [Sequence Thread] Collecting FITs headers...
[02/27/19 21:04:02.361][DEBUG] [Sequence Thread] ASCOM Camera: Could not get last exposure start time.  Reported as (unknown)
[02/27/19 21:04:02.361][DEBUG] [Sequence Thread] DATE-LOC time provided by SGPro (failed to retrieve valid entry from camera)...
[02/27/19 21:04:02.362][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info for last solve...
[02/27/19 21:04:02.362][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info from UI...
[02/27/19 21:04:02.363][DEBUG] [Sequence Thread] Clearing timed monitoring events...
[02/27/19 21:04:02.366][DEBUG] [Sequence Thread] Created full file name (file does not exist): C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\m81_Light_90sec_1x1__Green_gain_76_2019-02-27_210226_frame7_-15C.fit
[02/27/19 21:04:02.366][DEBUG] [Sequence Thread] SaveFileAscom: Start...
[02/27/19 21:04:02.366][DEBUG] [Sequence Thread] SaveFileAscom: Checking image data...
[02/27/19 21:04:02.366][DEBUG] [Sequence Thread] SaveFileAscom: Create normal preview bitmap...
[02/27/19 21:04:02.372][DEBUG] [Sequence Thread] SaveFileAscom: Locking preview bits...
[02/27/19 21:04:02.372][DEBUG] [Sequence Thread] SaveFileAscom: Validating file name...
[02/27/19 21:04:02.372][DEBUG] [Sequence Thread] SaveFileAscom: Starting byte traversal...
[02/27/19 21:04:02.552][DEBUG] [Sequence Thread] SaveFileAscom: Unlocking preview bits...
[02/27/19 21:04:02.552][DEBUG] [Sequence Thread] SaveFileAscom: Saving preview bitmap to disk...
[02/27/19 21:04:02.552][DEBUG] [Sequence Thread] SaveFileBmp16: Locking bitmap for disk write...
[02/27/19 21:04:02.552][DEBUG] [Sequence Thread] SaveFileBmp16: Opening file stream...
[02/27/19 21:04:02.552][DEBUG] [Sequence Thread] SaveFileBmp16: Writing FITS headers...
[02/27/19 21:04:02.553][DEBUG] [Sequence Thread] SaveFileBmp16: Traversing and persisting bitmap data...
[02/27/19 21:04:02.712][DEBUG] [Sequence Thread] SaveFileBmp16: FITS block fill...
[02/27/19 21:04:02.712][DEBUG] [Sequence Thread] SaveFileBmp16: Unlocking bitmap...
[02/27/19 21:04:02.712][DEBUG] [Sequence Thread] SaveFileBmp16: Closing file stream
[02/27/19 21:04:02.716][DEBUG] [Sequence Thread] SaveFileAscom: Displaying image preview in UI...
[02/27/19 21:04:02.716][DEBUG] [Sequence Thread] Internal Interface: Set Preview...
[02/27/19 21:04:02.716][DEBUG] [Sequence Thread] Display image preview using asynch task...
[02/27/19 21:04:03.029][DEBUG] [Main Thread] --> Find stars (normal)
[02/27/19 21:04:03.130][DEBUG] [Main Thread] AF frame was too large... downsample = 0.5...
[02/27/19 21:04:04.763][DEBUG] [Main Thread] Star detection using min star size of 3px...
[02/27/19 21:04:04.763][DEBUG] [Main Thread] Star detection using max star size of 60px...
[02/27/19 21:04:04.804][DEBUG] [Main Thread] Find stars took: 1775 ms...
[02/27/19 21:04:04.804][DEBUG] [Main Thread] Star list contains 213 stars...
[02/27/19 21:04:04.804][DEBUG] [Main Thread] Calculating HFR with sample size: 6
[02/27/19 21:04:05.567][DEBUG] [Sequence Thread] SaveFileAscom: Done
[02/27/19 21:04:05.567][DEBUG] [Sequence Thread] =========== Save file took 3204 ms
[02/27/19 21:04:05.567][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Image "m81_Light_90sec_1x1__Green_gain_76_2019-02-27_210226_frame7_-15C.fit" saved.  HFR = 2.39.
[02/27/19 21:04:05.567][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Image "m81_Light_90sec_1x1__Green_gain_76_2019-02-27_210226_frame7_-15C.fit" saved.  HFR = 2.39.)...
[02/27/19 21:04:05.573][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:04:05.573][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:4; f:6; o:
[02/27/19 21:04:05.573][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:04:05.573][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:04:05.573][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:04:05.674][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:04:05.674][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:04:05.674][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:4; f:6; o:
[02/27/19 21:04:05.674][DEBUG] [Sequence Thread] EventMarker 18 - t:m81 (1); e:4; f:6; o:
[02/27/19 21:04:05.680][DEBUG] [Sequence Thread] EventMarker 19 - t:m81 (1); e:4; f:7; o:
[02/27/19 21:04:05.680][DEBUG] [Sequence Thread] EventMarker 20 - t:m81 (1); e:4; f:7; o:
[02/27/19 21:04:05.680][DEBUG] [Sequence Thread] Running post event...
[02/27/19 21:04:05.680][DEBUG] [Sequence Thread] EventMarker 21 - t:m81 (1); e:4; f:7; o:
[02/27/19 21:04:05.683][DEBUG] [Sequence Thread] Incremented numComplete (7) for event[4]...
[02/27/19 21:04:05.686][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:04:05.686][DEBUG] [Sequence Thread] Current event[4] frame count: 7/30...
[02/27/19 21:04:05.686][DEBUG] [Sequence Thread] Looking at event[5]...
[02/27/19 21:04:05.686][DEBUG] [Sequence Thread] Looking at event[0]...
[02/27/19 21:04:05.686][DEBUG] [Sequence Thread] Found event event[0] with remaining frames.
[02/27/19 21:04:05.686][DEBUG] [Sequence Thread] Event[0] frame count: 13/60...
[02/27/19 21:04:05.686][DEBUG] [Sequence Thread] Getting next event (0)...
[02/27/19 21:04:05.686][DEBUG] [Sequence Thread] Checking for auto manual focus (post)...
[02/27/19 21:04:05.686][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:04:05.698][DEBUG] [Sequence Thread] Attempting to move to next event...
[02/27/19 21:04:05.698][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:04:05.698][DEBUG] [Sequence Thread] Current event[4] frame count: 7/30...
[02/27/19 21:04:05.698][DEBUG] [Sequence Thread] Looking at event[5]...
[02/27/19 21:04:05.698][DEBUG] [Sequence Thread] Looking at event[0]...
[02/27/19 21:04:05.698][DEBUG] [Sequence Thread] Found event event[0] with remaining frames.
[02/27/19 21:04:05.698][DEBUG] [Sequence Thread] Event[0] frame count: 13/60...
[02/27/19 21:04:05.698][DEBUG] [Sequence Thread] Getting next event (0)...
[02/27/19 21:04:05.698][DEBUG] [Sequence Thread] Running pre event...
[02/27/19 21:04:05.709][DEBUG] [Sequence Thread] Current target has end time at 28/02/2019 06:30:00
[02/27/19 21:04:05.709][DEBUG] [Sequence Thread] End time of next frame is at 27/02/2019 21:04:35
[02/27/19 21:04:05.709][DEBUG] [Sequence Thread] Target is still before end time, continuing...
[02/27/19 21:04:05.709][DEBUG] [Sequence Thread] Running capture event...
[02/27/19 21:04:05.710][DEBUG] [Sequence Thread] ------------- Starting capture frame for event[0] -------------
[02/27/19 21:04:05.715][DEBUG] [Sequence Thread] Sending commands...
[02/27/19 21:04:05.715][DEBUG] [Sequence Thread] SetFlatBox: Frame Type is Light
[02/27/19 21:04:05.715][DEBUG] [Sequence Thread] EventMarker 2 - t:m81 (1); e:0; f:13; o:
[02/27/19 21:04:05.715][DEBUG] [Sequence Thread] Checking if Meridian Flip is needed
[02/27/19 21:04:05.716][DEBUG] [Sequence Thread] Telescope is on the West side of the mount
[02/27/19 21:04:05.716][DEBUG] [Sequence Thread] Meridian Flip not needed, Hour Angle < Degrees Past To Flip: -40.3360523542314 < 0
[02/27/19 21:04:05.716][DEBUG] [Sequence Thread] EventMarker 3 - t:m81 (1); e:0; f:13; o:
[02/27/19 21:04:05.716][DEBUG] [Sequence Thread] EventMarker 4 - t:m81 (1); e:0; f:13; o:
[02/27/19 21:04:05.716][DEBUG] [Sequence Thread] Setting filter position 1...
[02/27/19 21:04:05.721][DEBUG] [Sequence Thread] Setting filter: Lum...
[02/27/19 21:04:05.721][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 1...
[02/27/19 21:04:05.721][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 1 is complete...
[02/27/19 21:04:05.923][DEBUG] [Sequence Thread] Adjust focuser pos per filter: Moving focsuer to focus position (64700)...
[02/27/19 21:04:05.923][DEBUG] [Sequence Thread] Adjust focuser pos per filter
[02/27/19 21:04:05.923][DEBUG] [Sequence Thread] Old filter: Green; Focus pos: 64679
[02/27/19 21:04:05.923][DEBUG] [Sequence Thread] New filter: Lum; Focus pos: 64700
[02/27/19 21:04:05.923][DEBUG] [Sequence Thread] Pos delta: 21 steps
[02/27/19 21:04:05.923][DEBUG] [Sequence Thread] New position-> (current: 4827) + (delta: 21) = 4848
[02/27/19 21:04:05.923][DEBUG] [Sequence Thread] Focuser moving to 4848
[02/27/19 21:04:06.728][DEBUG] [Sequence Thread] Focuser move call complete
[02/27/19 21:04:06.743][DEBUG] [Sequence Thread] Focuser position matches requested position (4848), continuing...
[02/27/19 21:04:06.743][DEBUG] [Sequence Thread] focuser move is complete...
[02/27/19 21:04:06.745][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 2...
[02/27/19 21:04:09.747][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 2 complete...
[02/27/19 21:04:09.757][DEBUG] [Sequence Thread] EventMarker 5 - t:m81 (1); e:0; f:13; o:
[02/27/19 21:04:09.757][DEBUG] [Sequence Thread] Checking for auto manual focus (pre)...
[02/27/19 21:04:09.757][DEBUG] [Sequence Thread] EventMarker 6 - t:m81 (1); e:0; f:13; o:
[02/27/19 21:04:09.798][DEBUG] [Sequence Thread] Running dither...
[02/27/19 21:04:09.806][DEBUG] [Sequence Thread] PHD2 dither request: 1...
[02/27/19 21:04:09.806][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:04:09.806][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:04:09.806][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:04:09.908][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:04:10.908][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:04:10.908][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:04:10.908][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:04:11.009][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:04:12.009][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:04:12.009][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:04:12.009][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:04:12.110][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:04:13.111][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:04:13.111][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:04:13.111][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:04:13.212][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:04:14.212][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:04:14.212][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:04:14.212][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:04:14.313][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:04:14.313][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:04:14.313][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:04:14.313][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:04:14.413][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:04:14.413][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "dither", "params": [1, false, {"pixels": 0.5, "time": 1, "timeout": 600}], "id": 1002}

[02/27/19 21:04:14.513][DEBUG] [PHD2 Listener Thread] Unknown object from PHD2: {"Event":"SettleBegin","Timestamp":1551301454.469,"Host":"JGL2_2","Inst":1}
[02/27/19 21:04:19.416][DEBUG] [Sequence Thread] EventMarker 1 - t:m81 (1); e:0; f:13; o:
[02/27/19 21:04:19.418][DEBUG] [Sequence Thread] Created base name for frame capture: m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_210419_frame14_-15C
[02/27/19 21:04:19.418][DEBUG] [Sequence Thread] Created directory for frame capture: C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\
[02/27/19 21:04:19.418][DEBUG] [Sequence Thread] EventMarker 7 - t:m81 (1); e:0; f:13; o:
[02/27/19 21:04:19.418][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:04:19.418][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:0; f:13; o:
[02/27/19 21:04:19.418][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:04:19.418][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:04:19.418][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:04:19.519][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:04:19.519][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:04:19.519][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:0; f:13; o:
[02/27/19 21:04:19.521][DEBUG] [Sequence Thread] {"method": "guide", "params": [{"pixels": 0.5, "time": 1, "timeout": 600}, false ], "id": 1003}
[02/27/19 21:04:19.521][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "guide", "params": [{"pixels": 0.5, "time": 1, "timeout": 600}, false ], "id": 1003}

[02/27/19 21:04:19.521][DEBUG] [Sequence Thread] EventMarker 172 - t:m81 (1); e:0; f:13; o:
[02/27/19 21:04:19.521][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:04:19.521][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:04:19.521][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:04:19.613][DEBUG] [PHD2 Listener Thread] Error received from RPC: Cannot initiate guide while dither is in progress
[02/27/19 21:04:19.621][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:04:19.621][DEBUG] [Sequence Thread] EventMarker 173 - t:m81 (1); e:0; f:13; o:
[02/27/19 21:04:19.621][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Attempting to settle the auto guider...
[02/27/19 21:04:19.621][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Attempting to settle the auto guider...)...
[02/27/19 21:04:19.621][DEBUG] [Sequence Thread] Waiting for Auto Guider distance to fall below 0.5
[02/27/19 21:04:19.621][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:04:19.621][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:04:19.627][DEBUG] [Sequence Thread] Distance is below 0.5, starting timer...
[02/27/19 21:04:20.129][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:04:20.129][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:04:20.322][DEBUG] [PHD2 Listener Thread] PHD2: Settle done received: GOOD
[02/27/19 21:04:20.638][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:04:20.638][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:04:20.644][DEBUG] [Sequence Thread] Distance stayed below 0.5 for 1 seconds, done settling...
[02/27/19 21:04:20.644][DEBUG] [Sequence Thread] Auto guider has settled...
[02/27/19 21:04:20.644][DEBUG] [Sequence Thread] EventMarker 8 - t:m81 (1); e:0; f:13; o:
[02/27/19 21:04:20.644][DEBUG] [Sequence Thread] EventMarker 9 - t:m81 (1); e:0; f:13; o:
[02/27/19 21:04:20.644][DEBUG] [Sequence Thread] EventMarker 10 - t:m81 (1); e:0; f:13; o:
[02/27/19 21:04:20.644][DEBUG] [Sequence Thread] Finished sending frame capture.  Entering wait mode...
[02/27/19 21:04:20.644][DEBUG] [Sequence Thread] EventMarker 11 - t:m81 (1); e:0; f:13; o:
[02/27/19 21:04:20.644][DEBUG] [Sequence Thread] EventMarker 12 - t:m81 (1); e:0; f:13; o:
[02/27/19 21:04:20.650][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE message received...
[02/27/19 21:04:20.650][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Starting integration of m81; Event 1; Frame 14 for 30s...
[02/27/19 21:04:20.650][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Starting integration of m81; Event 1; Frame 14 for 30s...)...
[02/27/19 21:04:20.651][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, TimedError): (2019-02-25) Failure while integrating m81; Event 1; Frame 14 for 30s. Image has not downloaded in alloted time period.
[02/27/19 21:04:20.651][DEBUG] [Sequence Thread] GNS: Sent timed event to GNS...
[02/27/19 21:04:20.651][DEBUG] [Camera Thread] SetAscomGain to 76
[02/27/19 21:04:20.652][DEBUG] [Sequence Thread] EventMarker 13 - t:m81 (1); e:0; f:13; o:
[02/27/19 21:04:20.652][DEBUG] [Camera Thread] Camera gain set to 76
[02/27/19 21:04:20.652][DEBUG] [Camera Thread] SetAscomNormalSpeed... 
[02/27/19 21:04:20.652][DEBUG] [Camera Thread] Cannot set readout speed, not supported by camera...
[02/27/19 21:04:50.896][DEBUG] [Sequence Thread] EventMarker 15 - t:m81 (1); e:0; f:13; o:
[02/27/19 21:04:50.899][DEBUG] [Sequence Thread] Waking from exposure time sleep period...
[02/27/19 21:04:50.899][DEBUG] [Sequence Thread] Checking to see if the CCD has a temp...
[02/27/19 21:04:50.899][DEBUG] [Sequence Thread] Saving the CCD temp...
[02/27/19 21:04:50.905][DEBUG] [Sequence Thread] Entering super dangerous loop to await image completion...
[02/27/19 21:04:50.908][DEBUG] [Sequence Thread] EventMarker 16 - t:m81 (1); e:0; f:13; o:
[02/27/19 21:04:51.777][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE complete...
[02/27/19 21:04:51.912][DEBUG] [Sequence Thread] EventMarker 17 - t:m81 (1); e:0; f:13; o:
[02/27/19 21:04:51.912][DEBUG] [Sequence Thread] Image reported as complete.  Continuing...
[02/27/19 21:04:51.912][DEBUG] [Sequence Thread] Collecting FITs headers...
[02/27/19 21:04:51.913][DEBUG] [Sequence Thread] ASCOM Camera: Could not get last exposure start time.  Reported as (unknown)
[02/27/19 21:04:51.913][DEBUG] [Sequence Thread] DATE-LOC time provided by SGPro (failed to retrieve valid entry from camera)...
[02/27/19 21:04:51.915][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info for last solve...
[02/27/19 21:04:51.915][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info from UI...
[02/27/19 21:04:51.915][DEBUG] [Sequence Thread] Clearing timed monitoring events...
[02/27/19 21:04:51.919][DEBUG] [Sequence Thread] Created full file name (file does not exist): C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_210419_frame14_-15C.fit
[02/27/19 21:04:51.919][DEBUG] [Sequence Thread] SaveFileAscom: Start...
[02/27/19 21:04:51.919][DEBUG] [Sequence Thread] SaveFileAscom: Checking image data...
[02/27/19 21:04:51.919][DEBUG] [Sequence Thread] SaveFileAscom: Create normal preview bitmap...
[02/27/19 21:04:51.925][DEBUG] [Sequence Thread] SaveFileAscom: Locking preview bits...
[02/27/19 21:04:51.925][DEBUG] [Sequence Thread] SaveFileAscom: Validating file name...
[02/27/19 21:04:51.925][DEBUG] [Sequence Thread] SaveFileAscom: Starting byte traversal...
[02/27/19 21:04:52.106][DEBUG] [Sequence Thread] SaveFileAscom: Unlocking preview bits...
[02/27/19 21:04:52.106][DEBUG] [Sequence Thread] SaveFileAscom: Saving preview bitmap to disk...
[02/27/19 21:04:52.106][DEBUG] [Sequence Thread] SaveFileBmp16: Locking bitmap for disk write...
[02/27/19 21:04:52.106][DEBUG] [Sequence Thread] SaveFileBmp16: Opening file stream...
[02/27/19 21:04:52.106][DEBUG] [Sequence Thread] SaveFileBmp16: Writing FITS headers...
[02/27/19 21:04:52.107][DEBUG] [Sequence Thread] SaveFileBmp16: Traversing and persisting bitmap data...
[02/27/19 21:04:52.275][DEBUG] [Sequence Thread] SaveFileBmp16: FITS block fill...
[02/27/19 21:04:52.275][DEBUG] [Sequence Thread] SaveFileBmp16: Unlocking bitmap...
[02/27/19 21:04:52.275][DEBUG] [Sequence Thread] SaveFileBmp16: Closing file stream
[02/27/19 21:04:52.279][DEBUG] [Sequence Thread] SaveFileAscom: Displaying image preview in UI...
[02/27/19 21:04:52.279][DEBUG] [Sequence Thread] Internal Interface: Set Preview...
[02/27/19 21:04:52.279][DEBUG] [Sequence Thread] Display image preview using asynch task...
[02/27/19 21:04:52.606][DEBUG] [Main Thread] --> Find stars (normal)
[02/27/19 21:04:52.686][DEBUG] [Main Thread] AF frame was too large... downsample = 0.5...
[02/27/19 21:04:54.448][DEBUG] [Main Thread] Star detection using min star size of 3px...
[02/27/19 21:04:54.448][DEBUG] [Main Thread] Star detection using max star size of 60px...
[02/27/19 21:04:54.498][DEBUG] [Main Thread] Find stars took: 1892 ms...
[02/27/19 21:04:54.498][DEBUG] [Main Thread] Star list contains 199 stars...
[02/27/19 21:04:54.498][DEBUG] [Main Thread] Calculating HFR with sample size: 6
[02/27/19 21:04:55.359][DEBUG] [Sequence Thread] SaveFileAscom: Done
[02/27/19 21:04:55.359][DEBUG] [Sequence Thread] =========== Save file took 3443 ms
[02/27/19 21:04:55.359][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_210419_frame14_-15C.fit" saved.  HFR = 2.63.
[02/27/19 21:04:55.359][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_210419_frame14_-15C.fit" saved.  HFR = 2.63.)...
[02/27/19 21:04:55.359][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:04:55.373][DEBUG] [MF Update Thread] Performing serialize...
[02/27/19 21:04:55.377][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:04:55.377][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:0; f:13; o:
[02/27/19 21:04:55.377][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:04:55.377][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:04:55.377][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:04:55.478][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:04:55.478][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:04:55.478][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:0; f:13; o:
[02/27/19 21:04:55.478][DEBUG] [Sequence Thread] EventMarker 18 - t:m81 (1); e:0; f:13; o:
[02/27/19 21:04:55.492][DEBUG] [Sequence Thread] EventMarker 19 - t:m81 (1); e:0; f:14; o:
[02/27/19 21:04:55.492][DEBUG] [Sequence Thread] EventMarker 20 - t:m81 (1); e:0; f:14; o:
[02/27/19 21:04:55.492][DEBUG] [Sequence Thread] Running post event...
[02/27/19 21:04:55.492][DEBUG] [Sequence Thread] EventMarker 21 - t:m81 (1); e:0; f:14; o:
[02/27/19 21:04:55.498][DEBUG] [Sequence Thread] Incremented numComplete (14) for event[0]...
[02/27/19 21:04:55.506][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:04:55.506][DEBUG] [Sequence Thread] Current event[0] frame count: 14/60...
[02/27/19 21:04:55.506][DEBUG] [Sequence Thread] Looking at event[1]...
[02/27/19 21:04:55.506][DEBUG] [Sequence Thread] Found event event[1] with remaining frames.
[02/27/19 21:04:55.506][DEBUG] [Sequence Thread] Event[1] frame count: 6/60...
[02/27/19 21:04:55.506][DEBUG] [Sequence Thread] Getting next event (1)...
[02/27/19 21:04:55.506][DEBUG] [Sequence Thread] Checking for auto manual focus (post)...
[02/27/19 21:04:55.506][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:04:55.526][DEBUG] [Sequence Thread] Attempting to move to next event...
[02/27/19 21:04:55.526][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:04:55.526][DEBUG] [Sequence Thread] Current event[0] frame count: 14/60...
[02/27/19 21:04:55.526][DEBUG] [Sequence Thread] Looking at event[1]...
[02/27/19 21:04:55.526][DEBUG] [Sequence Thread] Found event event[1] with remaining frames.
[02/27/19 21:04:55.526][DEBUG] [Sequence Thread] Event[1] frame count: 6/60...
[02/27/19 21:04:55.526][DEBUG] [Sequence Thread] Getting next event (1)...
[02/27/19 21:04:55.526][DEBUG] [Sequence Thread] Running pre event...
[02/27/19 21:04:55.536][DEBUG] [Sequence Thread] Current target has end time at 28/02/2019 06:30:00
[02/27/19 21:04:55.536][DEBUG] [Sequence Thread] End time of next frame is at 27/02/2019 21:05:25
[02/27/19 21:04:55.536][DEBUG] [Sequence Thread] Target is still before end time, continuing...
[02/27/19 21:04:55.536][DEBUG] [Sequence Thread] Running capture event...
[02/27/19 21:04:55.538][DEBUG] [Sequence Thread] ------------- Starting capture frame for event[1] -------------
[02/27/19 21:04:55.542][DEBUG] [Sequence Thread] Sending commands...
[02/27/19 21:04:55.542][DEBUG] [Sequence Thread] SetFlatBox: Frame Type is Light
[02/27/19 21:04:55.542][DEBUG] [Sequence Thread] EventMarker 2 - t:m81 (1); e:1; f:6; o:
[02/27/19 21:04:55.542][DEBUG] [Sequence Thread] Checking if Meridian Flip is needed
[02/27/19 21:04:55.542][DEBUG] [Sequence Thread] Telescope is on the West side of the mount
[02/27/19 21:04:55.542][DEBUG] [Sequence Thread] Meridian Flip not needed, Hour Angle < Degrees Past To Flip: -40.1325349601259 < 0
[02/27/19 21:04:55.542][DEBUG] [Sequence Thread] EventMarker 3 - t:m81 (1); e:1; f:6; o:
[02/27/19 21:04:55.542][DEBUG] [Sequence Thread] EventMarker 4 - t:m81 (1); e:1; f:6; o:
[02/27/19 21:04:55.542][DEBUG] [Sequence Thread] Setting filter position 1...
[02/27/19 21:04:55.542][DEBUG] [Sequence Thread] Filter position 1 is already set.  Skipping...
[02/27/19 21:04:55.542][DEBUG] [Sequence Thread] EventMarker 5 - t:m81 (1); e:1; f:6; o:
[02/27/19 21:04:55.542][DEBUG] [Sequence Thread] Checking for auto manual focus (pre)...
[02/27/19 21:04:55.542][DEBUG] [Sequence Thread] EventMarker 6 - t:m81 (1); e:1; f:6; o:
[02/27/19 21:04:55.545][DEBUG] [Sequence Thread] Autoguider will not dither this frame. Total frames is not a modulus of 5
[02/27/19 21:04:55.545][DEBUG] [Sequence Thread] EventMarker 1 - t:m81 (1); e:1; f:6; o:
[02/27/19 21:04:55.545][DEBUG] [Sequence Thread] Created base name for frame capture: m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_210455_frame7_-15C
[02/27/19 21:04:55.545][DEBUG] [Sequence Thread] Created directory for frame capture: C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\
[02/27/19 21:04:55.545][DEBUG] [Sequence Thread] EventMarker 7 - t:m81 (1); e:1; f:6; o:
[02/27/19 21:04:55.545][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:04:55.545][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:1; f:6; o:
[02/27/19 21:04:55.545][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:04:55.545][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:04:55.545][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:04:55.646][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:04:55.646][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:04:55.646][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:1; f:6; o:
[02/27/19 21:04:55.647][DEBUG] [Sequence Thread] {"method": "guide", "params": [{"pixels": 0.5, "time": 1, "timeout": 600}, false ], "id": 1003}
[02/27/19 21:04:55.647][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "guide", "params": [{"pixels": 0.5, "time": 1, "timeout": 600}, false ], "id": 1003}

[02/27/19 21:04:55.647][DEBUG] [Sequence Thread] EventMarker 172 - t:m81 (1); e:1; f:6; o:
[02/27/19 21:04:55.647][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:04:55.647][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:04:55.647][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:04:55.710][DEBUG] [PHD2 Listener Thread] Unknown object from PHD2: {"Event":"SettleBegin","Timestamp":1551301495.660,"Host":"JGL2_2","Inst":1}
[02/27/19 21:04:55.747][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:04:55.747][DEBUG] [Sequence Thread] EventMarker 173 - t:m81 (1); e:1; f:6; o:
[02/27/19 21:04:55.748][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Attempting to settle the auto guider...
[02/27/19 21:04:55.748][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Attempting to settle the auto guider...)...
[02/27/19 21:04:55.748][DEBUG] [Sequence Thread] Waiting for Auto Guider distance to fall below 0.5
[02/27/19 21:04:55.748][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:04:55.748][DEBUG] [Sequence Thread] PHD2 distance request returned 0.2...
[02/27/19 21:04:55.758][DEBUG] [Sequence Thread] Distance is below 0.5, starting timer...
[02/27/19 21:04:56.260][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:04:56.260][DEBUG] [Sequence Thread] PHD2 distance request returned 0.2...
[02/27/19 21:04:56.771][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:04:56.771][DEBUG] [Sequence Thread] PHD2 distance request returned 0.2...
[02/27/19 21:04:56.779][DEBUG] [Sequence Thread] Distance stayed below 0.5 for 1 seconds, done settling...
[02/27/19 21:04:56.779][DEBUG] [Sequence Thread] SGPro settle criteria have been met, but the guider reports it is not ready to resume, waiting...
[02/27/19 21:04:58.336][DEBUG] [PHD2 Listener Thread] PHD2: Settle done received: GOOD
[02/27/19 21:04:58.785][DEBUG] [Sequence Thread] Auto guider has settled...
[02/27/19 21:04:58.785][DEBUG] [Sequence Thread] EventMarker 8 - t:m81 (1); e:1; f:6; o:
[02/27/19 21:04:58.785][DEBUG] [Sequence Thread] EventMarker 9 - t:m81 (1); e:1; f:6; o:
[02/27/19 21:04:58.785][DEBUG] [Sequence Thread] EventMarker 10 - t:m81 (1); e:1; f:6; o:
[02/27/19 21:04:58.785][DEBUG] [Sequence Thread] Finished sending frame capture.  Entering wait mode...
[02/27/19 21:04:58.785][DEBUG] [Sequence Thread] EventMarker 11 - t:m81 (1); e:1; f:6; o:
[02/27/19 21:04:58.785][DEBUG] [Sequence Thread] EventMarker 12 - t:m81 (1); e:1; f:6; o:
[02/27/19 21:04:58.792][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE message received...
[02/27/19 21:04:58.794][DEBUG] [Camera Thread] SetAscomGain to 76
[02/27/19 21:04:58.794][DEBUG] [Camera Thread] Camera gain set to 76
[02/27/19 21:04:58.794][DEBUG] [Camera Thread] SetAscomNormalSpeed... 
[02/27/19 21:04:58.795][DEBUG] [Camera Thread] Cannot set readout speed, not supported by camera...
[02/27/19 21:04:58.795][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Starting integration of m81; Event 2; Frame 7 for 30s...
[02/27/19 21:04:58.795][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Starting integration of m81; Event 2; Frame 7 for 30s...)...
[02/27/19 21:04:58.796][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, TimedError): (2019-02-25) Failure while integrating m81; Event 2; Frame 7 for 30s. Image has not downloaded in alloted time period.
[02/27/19 21:04:58.796][DEBUG] [Sequence Thread] GNS: Sent timed event to GNS...
[02/27/19 21:04:58.797][DEBUG] [Sequence Thread] EventMarker 13 - t:m81 (1); e:1; f:6; o:
[02/27/19 21:05:28.993][DEBUG] [Sequence Thread] EventMarker 15 - t:m81 (1); e:1; f:6; o:
[02/27/19 21:05:28.997][DEBUG] [Sequence Thread] Waking from exposure time sleep period...
[02/27/19 21:05:28.997][DEBUG] [Sequence Thread] Checking to see if the CCD has a temp...
[02/27/19 21:05:28.997][DEBUG] [Sequence Thread] Saving the CCD temp...
[02/27/19 21:05:29.003][DEBUG] [Sequence Thread] Entering super dangerous loop to await image completion...
[02/27/19 21:05:29.006][DEBUG] [Sequence Thread] EventMarker 16 - t:m81 (1); e:1; f:6; o:
[02/27/19 21:05:29.938][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE complete...
[02/27/19 21:05:30.010][DEBUG] [Sequence Thread] EventMarker 17 - t:m81 (1); e:1; f:6; o:
[02/27/19 21:05:30.010][DEBUG] [Sequence Thread] Image reported as complete.  Continuing...
[02/27/19 21:05:30.010][DEBUG] [Sequence Thread] Collecting FITs headers...
[02/27/19 21:05:30.011][DEBUG] [Sequence Thread] ASCOM Camera: Could not get last exposure start time.  Reported as (unknown)
[02/27/19 21:05:30.011][DEBUG] [Sequence Thread] DATE-LOC time provided by SGPro (failed to retrieve valid entry from camera)...
[02/27/19 21:05:30.012][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info for last solve...
[02/27/19 21:05:30.012][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info from UI...
[02/27/19 21:05:30.013][DEBUG] [Sequence Thread] Clearing timed monitoring events...
[02/27/19 21:05:30.017][DEBUG] [Sequence Thread] Created full file name (file does not exist): C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_210455_frame7_-15C.fit
[02/27/19 21:05:30.017][DEBUG] [Sequence Thread] SaveFileAscom: Start...
[02/27/19 21:05:30.017][DEBUG] [Sequence Thread] SaveFileAscom: Checking image data...
[02/27/19 21:05:30.017][DEBUG] [Sequence Thread] SaveFileAscom: Create normal preview bitmap...
[02/27/19 21:05:30.023][DEBUG] [Sequence Thread] SaveFileAscom: Locking preview bits...
[02/27/19 21:05:30.023][DEBUG] [Sequence Thread] SaveFileAscom: Validating file name...
[02/27/19 21:05:30.023][DEBUG] [Sequence Thread] SaveFileAscom: Starting byte traversal...
[02/27/19 21:05:30.204][DEBUG] [Sequence Thread] SaveFileAscom: Unlocking preview bits...
[02/27/19 21:05:30.204][DEBUG] [Sequence Thread] SaveFileAscom: Saving preview bitmap to disk...
[02/27/19 21:05:30.204][DEBUG] [Sequence Thread] SaveFileBmp16: Locking bitmap for disk write...
[02/27/19 21:05:30.204][DEBUG] [Sequence Thread] SaveFileBmp16: Opening file stream...
[02/27/19 21:05:30.205][DEBUG] [Sequence Thread] SaveFileBmp16: Writing FITS headers...
[02/27/19 21:05:30.205][DEBUG] [Sequence Thread] SaveFileBmp16: Traversing and persisting bitmap data...
[02/27/19 21:05:30.384][DEBUG] [Sequence Thread] SaveFileBmp16: FITS block fill...
[02/27/19 21:05:30.384][DEBUG] [Sequence Thread] SaveFileBmp16: Unlocking bitmap...
[02/27/19 21:05:30.384][DEBUG] [Sequence Thread] SaveFileBmp16: Closing file stream
[02/27/19 21:05:30.388][DEBUG] [Sequence Thread] SaveFileAscom: Displaying image preview in UI...
[02/27/19 21:05:30.388][DEBUG] [Sequence Thread] Internal Interface: Set Preview...
[02/27/19 21:05:30.388][DEBUG] [Sequence Thread] Display image preview using asynch task...
[02/27/19 21:05:30.671][DEBUG] [Main Thread] --> Find stars (normal)
[02/27/19 21:05:30.739][DEBUG] [Main Thread] AF frame was too large... downsample = 0.5...
[02/27/19 21:05:32.338][DEBUG] [Main Thread] Star detection using min star size of 3px...
[02/27/19 21:05:32.338][DEBUG] [Main Thread] Star detection using max star size of 60px...
[02/27/19 21:05:32.382][DEBUG] [Main Thread] Find stars took: 1711 ms...
[02/27/19 21:05:32.382][DEBUG] [Main Thread] Star list contains 193 stars...
[02/27/19 21:05:32.382][DEBUG] [Main Thread] Calculating HFR with sample size: 6
[02/27/19 21:05:33.305][DEBUG] [Sequence Thread] SaveFileAscom: Done
[02/27/19 21:05:33.305][DEBUG] [Sequence Thread] =========== Save file took 3292 ms
[02/27/19 21:05:33.305][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_210455_frame7_-15C.fit" saved.  HFR = 2.72.
[02/27/19 21:05:33.305][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_210455_frame7_-15C.fit" saved.  HFR = 2.72.)...
[02/27/19 21:05:33.796][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:05:33.797][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:1; f:6; o:
[02/27/19 21:05:33.797][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:05:33.797][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:05:33.797][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:05:33.898][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:05:33.898][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:05:33.898][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:1; f:6; o:
[02/27/19 21:05:33.912][DEBUG] [Sequence Thread] EventMarker 18 - t:m81 (1); e:1; f:6; o:
[02/27/19 21:05:33.919][DEBUG] [Sequence Thread] EventMarker 19 - t:m81 (1); e:1; f:7; o:
[02/27/19 21:05:33.919][DEBUG] [Sequence Thread] EventMarker 20 - t:m81 (1); e:1; f:7; o:
[02/27/19 21:05:33.919][DEBUG] [Sequence Thread] Running post event...
[02/27/19 21:05:33.919][DEBUG] [Sequence Thread] EventMarker 21 - t:m81 (1); e:1; f:7; o:
[02/27/19 21:05:33.923][DEBUG] [Sequence Thread] Incremented numComplete (7) for event[1]...
[02/27/19 21:05:33.924][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:05:33.924][DEBUG] [Sequence Thread] Current event[1] frame count: 7/60...
[02/27/19 21:05:33.924][DEBUG] [Sequence Thread] Looking at event[2]...
[02/27/19 21:05:33.924][DEBUG] [Sequence Thread] Found event event[2] with remaining frames.
[02/27/19 21:05:33.924][DEBUG] [Sequence Thread] Event[2] frame count: 7/30...
[02/27/19 21:05:33.924][DEBUG] [Sequence Thread] Getting next event (2)...
[02/27/19 21:05:33.925][DEBUG] [Sequence Thread] Checking for auto manual focus (post)...
[02/27/19 21:05:33.925][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:05:33.936][DEBUG] [Sequence Thread] Attempting to move to next event...
[02/27/19 21:05:33.937][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:05:33.937][DEBUG] [Sequence Thread] Current event[1] frame count: 7/60...
[02/27/19 21:05:33.937][DEBUG] [Sequence Thread] Looking at event[2]...
[02/27/19 21:05:33.937][DEBUG] [Sequence Thread] Found event event[2] with remaining frames.
[02/27/19 21:05:33.937][DEBUG] [Sequence Thread] Event[2] frame count: 7/30...
[02/27/19 21:05:33.937][DEBUG] [Sequence Thread] Getting next event (2)...
[02/27/19 21:05:33.937][DEBUG] [Sequence Thread] Running pre event...
[02/27/19 21:05:34.035][DEBUG] [Sequence Thread] Current target has end time at 28/02/2019 06:30:00
[02/27/19 21:05:34.035][DEBUG] [Sequence Thread] End time of next frame is at 27/02/2019 21:07:04
[02/27/19 21:05:34.035][DEBUG] [Sequence Thread] Target is still before end time, continuing...
[02/27/19 21:05:34.035][DEBUG] [Sequence Thread] Running capture event...
[02/27/19 21:05:34.040][DEBUG] [Sequence Thread] ------------- Starting capture frame for event[2] -------------
[02/27/19 21:05:34.046][DEBUG] [Sequence Thread] Sending commands...
[02/27/19 21:05:34.046][DEBUG] [Sequence Thread] SetFlatBox: Frame Type is Light
[02/27/19 21:05:34.046][DEBUG] [Sequence Thread] EventMarker 2 - t:m81 (1); e:2; f:7; o:
[02/27/19 21:05:34.046][DEBUG] [Sequence Thread] Checking if Meridian Flip is needed
[02/27/19 21:05:34.046][DEBUG] [Sequence Thread] Telescope is on the West side of the mount
[02/27/19 21:05:34.046][DEBUG] [Sequence Thread] Meridian Flip not needed, Hour Angle < Degrees Past To Flip: -39.9684234219925 < 0
[02/27/19 21:05:34.046][DEBUG] [Sequence Thread] EventMarker 3 - t:m81 (1); e:2; f:7; o:
[02/27/19 21:05:34.047][DEBUG] [Sequence Thread] EventMarker 4 - t:m81 (1); e:2; f:7; o:
[02/27/19 21:05:34.047][DEBUG] [Sequence Thread] Setting filter position 4...
[02/27/19 21:05:34.050][DEBUG] [Sequence Thread] Setting filter: Blue...
[02/27/19 21:05:34.050][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 1...
[02/27/19 21:05:34.050][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 1 is complete...
[02/27/19 21:05:34.276][DEBUG] [Sequence Thread] Adjust focuser pos per filter: Moving focsuer to focus position (64704)...
[02/27/19 21:05:34.276][DEBUG] [Sequence Thread] Adjust focuser pos per filter
[02/27/19 21:05:34.276][DEBUG] [Sequence Thread] Old filter: Lum; Focus pos: 64700
[02/27/19 21:05:34.276][DEBUG] [Sequence Thread] New filter: Blue; Focus pos: 64704
[02/27/19 21:05:34.276][DEBUG] [Sequence Thread] Pos delta: 4 steps
[02/27/19 21:05:34.276][DEBUG] [Sequence Thread] New position-> (current: 4848) + (delta: 4) = 4852
[02/27/19 21:05:34.276][DEBUG] [Sequence Thread] Focuser moving to 4852
[02/27/19 21:05:34.917][DEBUG] [Sequence Thread] Focuser move call complete
[02/27/19 21:05:34.927][DEBUG] [Sequence Thread] Focuser position matches requested position (4852), continuing...
[02/27/19 21:05:34.927][DEBUG] [Sequence Thread] focuser move is complete...
[02/27/19 21:05:34.929][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 2...
[02/27/19 21:05:36.931][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 2 complete...
[02/27/19 21:05:36.944][DEBUG] [Sequence Thread] EventMarker 5 - t:m81 (1); e:2; f:7; o:
[02/27/19 21:05:36.944][DEBUG] [Sequence Thread] Checking for auto manual focus (pre)...
[02/27/19 21:05:36.944][DEBUG] [Sequence Thread] EventMarker 6 - t:m81 (1); e:2; f:7; o:
[02/27/19 21:05:36.986][DEBUG] [Sequence Thread] Autoguider will not dither this frame. Total frames is not a modulus of 5
[02/27/19 21:05:36.987][DEBUG] [Sequence Thread] EventMarker 1 - t:m81 (1); e:2; f:7; o:
[02/27/19 21:05:36.987][DEBUG] [Sequence Thread] Created base name for frame capture: m81_Light_90sec_1x1__Blue_gain_76_2019-02-27_210536_frame8_-15C
[02/27/19 21:05:36.987][DEBUG] [Sequence Thread] Created directory for frame capture: C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\
[02/27/19 21:05:36.987][DEBUG] [Sequence Thread] EventMarker 7 - t:m81 (1); e:2; f:7; o:
[02/27/19 21:05:36.987][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:05:36.987][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:2; f:7; o:
[02/27/19 21:05:36.987][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:05:36.987][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:05:36.987][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:05:37.088][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:05:37.088][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:05:37.088][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:2; f:7; o:
[02/27/19 21:05:37.088][DEBUG] [Sequence Thread] {"method": "guide", "params": [{"pixels": 0.5, "time": 1, "timeout": 600}, false ], "id": 1003}
[02/27/19 21:05:37.088][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "guide", "params": [{"pixels": 0.5, "time": 1, "timeout": 600}, false ], "id": 1003}

[02/27/19 21:05:37.088][DEBUG] [Sequence Thread] EventMarker 172 - t:m81 (1); e:2; f:7; o:
[02/27/19 21:05:37.088][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:05:37.088][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:05:37.088][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:05:37.163][DEBUG] [PHD2 Listener Thread] Unknown object from PHD2: {"Event":"SettleBegin","Timestamp":1551301537.113,"Host":"JGL2_2","Inst":1}
[02/27/19 21:05:37.189][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:05:37.189][DEBUG] [Sequence Thread] EventMarker 173 - t:m81 (1); e:2; f:7; o:
[02/27/19 21:05:37.189][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Attempting to settle the auto guider...
[02/27/19 21:05:37.189][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Attempting to settle the auto guider...)...
[02/27/19 21:05:37.189][DEBUG] [Sequence Thread] Waiting for Auto Guider distance to fall below 0.5
[02/27/19 21:05:37.189][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:05:37.189][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:05:37.195][DEBUG] [Sequence Thread] Distance is below 0.5, starting timer...
[02/27/19 21:05:37.696][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:05:37.696][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:05:38.202][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:05:38.202][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:05:38.208][DEBUG] [Sequence Thread] Distance stayed below 0.5 for 1 seconds, done settling...
[02/27/19 21:05:38.208][DEBUG] [Sequence Thread] SGPro settle criteria have been met, but the guider reports it is not ready to resume, waiting...
[02/27/19 21:05:40.298][DEBUG] [PHD2 Listener Thread] PHD2: Settle done received: GOOD
[02/27/19 21:05:40.779][DEBUG] [Sequence Thread] Auto guider has settled...
[02/27/19 21:05:40.779][DEBUG] [Sequence Thread] EventMarker 8 - t:m81 (1); e:2; f:7; o:
[02/27/19 21:05:40.779][DEBUG] [Sequence Thread] EventMarker 9 - t:m81 (1); e:2; f:7; o:
[02/27/19 21:05:40.779][DEBUG] [Sequence Thread] EventMarker 10 - t:m81 (1); e:2; f:7; o:
[02/27/19 21:05:40.779][DEBUG] [Sequence Thread] Finished sending frame capture.  Entering wait mode...
[02/27/19 21:05:40.780][DEBUG] [Sequence Thread] EventMarker 11 - t:m81 (1); e:2; f:7; o:
[02/27/19 21:05:40.781][DEBUG] [Sequence Thread] EventMarker 12 - t:m81 (1); e:2; f:7; o:
[02/27/19 21:05:40.787][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Starting integration of m81; Event 3; Frame 8 for 90s...
[02/27/19 21:05:40.787][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Starting integration of m81; Event 3; Frame 8 for 90s...)...
[02/27/19 21:05:40.788][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE message received...
[02/27/19 21:05:40.788][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, TimedError): (2019-02-25) Failure while integrating m81; Event 3; Frame 8 for 90s. Image has not downloaded in alloted time period.
[02/27/19 21:05:40.788][DEBUG] [Sequence Thread] GNS: Sent timed event to GNS...
[02/27/19 21:05:40.789][DEBUG] [Camera Thread] SetAscomGain to 76
[02/27/19 21:05:40.790][DEBUG] [Camera Thread] Camera gain set to 76
[02/27/19 21:05:40.790][DEBUG] [Camera Thread] SetAscomNormalSpeed... 
[02/27/19 21:05:40.790][DEBUG] [Sequence Thread] EventMarker 13 - t:m81 (1); e:2; f:7; o:
[02/27/19 21:05:40.790][DEBUG] [Camera Thread] Cannot set readout speed, not supported by camera...
[02/27/19 21:06:11.658][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:06:11.678][DEBUG] [Main Thread] Performing serialize...
[02/27/19 21:07:10.872][DEBUG] [Sequence Thread] EventMarker 15 - t:m81 (1); e:2; f:7; o:
[02/27/19 21:07:10.875][DEBUG] [Sequence Thread] Waking from exposure time sleep period...
[02/27/19 21:07:10.875][DEBUG] [Sequence Thread] Checking to see if the CCD has a temp...
[02/27/19 21:07:10.875][DEBUG] [Sequence Thread] Saving the CCD temp...
[02/27/19 21:07:10.881][DEBUG] [Sequence Thread] Entering super dangerous loop to await image completion...
[02/27/19 21:07:10.884][DEBUG] [Sequence Thread] EventMarker 16 - t:m81 (1); e:2; f:7; o:
[02/27/19 21:07:12.014][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE complete...
[02/27/19 21:07:12.389][DEBUG] [Sequence Thread] EventMarker 17 - t:m81 (1); e:2; f:7; o:
[02/27/19 21:07:12.389][DEBUG] [Sequence Thread] Image reported as complete.  Continuing...
[02/27/19 21:07:12.389][DEBUG] [Sequence Thread] Collecting FITs headers...
[02/27/19 21:07:12.390][DEBUG] [Sequence Thread] ASCOM Camera: Could not get last exposure start time.  Reported as (unknown)
[02/27/19 21:07:12.390][DEBUG] [Sequence Thread] DATE-LOC time provided by SGPro (failed to retrieve valid entry from camera)...
[02/27/19 21:07:12.392][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info for last solve...
[02/27/19 21:07:12.392][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info from UI...
[02/27/19 21:07:12.392][DEBUG] [Sequence Thread] Clearing timed monitoring events...
[02/27/19 21:07:12.399][DEBUG] [Sequence Thread] Created full file name (file does not exist): C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\m81_Light_90sec_1x1__Blue_gain_76_2019-02-27_210536_frame8_-15C.fit
[02/27/19 21:07:12.399][DEBUG] [Sequence Thread] SaveFileAscom: Start...
[02/27/19 21:07:12.399][DEBUG] [Sequence Thread] SaveFileAscom: Checking image data...
[02/27/19 21:07:12.399][DEBUG] [Sequence Thread] SaveFileAscom: Create normal preview bitmap...
[02/27/19 21:07:12.409][DEBUG] [Sequence Thread] SaveFileAscom: Locking preview bits...
[02/27/19 21:07:12.409][DEBUG] [Sequence Thread] SaveFileAscom: Validating file name...
[02/27/19 21:07:12.409][DEBUG] [Sequence Thread] SaveFileAscom: Starting byte traversal...
[02/27/19 21:07:12.571][DEBUG] [Sequence Thread] SaveFileAscom: Unlocking preview bits...
[02/27/19 21:07:12.571][DEBUG] [Sequence Thread] SaveFileAscom: Saving preview bitmap to disk...
[02/27/19 21:07:12.571][DEBUG] [Sequence Thread] SaveFileBmp16: Locking bitmap for disk write...
[02/27/19 21:07:12.571][DEBUG] [Sequence Thread] SaveFileBmp16: Opening file stream...
[02/27/19 21:07:12.571][DEBUG] [Sequence Thread] SaveFileBmp16: Writing FITS headers...
[02/27/19 21:07:12.574][DEBUG] [Sequence Thread] SaveFileBmp16: Traversing and persisting bitmap data...
[02/27/19 21:07:12.717][DEBUG] [Sequence Thread] SaveFileBmp16: FITS block fill...
[02/27/19 21:07:12.717][DEBUG] [Sequence Thread] SaveFileBmp16: Unlocking bitmap...
[02/27/19 21:07:12.717][DEBUG] [Sequence Thread] SaveFileBmp16: Closing file stream
[02/27/19 21:07:12.721][DEBUG] [Sequence Thread] SaveFileAscom: Displaying image preview in UI...
[02/27/19 21:07:12.721][DEBUG] [Sequence Thread] Internal Interface: Set Preview...
[02/27/19 21:07:12.721][DEBUG] [Sequence Thread] Display image preview using asynch task...
[02/27/19 21:07:13.633][DEBUG] [Sequence Thread] SaveFileAscom: Done
[02/27/19 21:07:13.633][DEBUG] [Sequence Thread] =========== Save file took 1240 ms
[02/27/19 21:07:13.633][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Image "m81_Light_90sec_1x1__Blue_gain_76_2019-02-27_210536_frame8_-15C.fit" saved.  HFR = 2.72.
[02/27/19 21:07:13.633][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Image "m81_Light_90sec_1x1__Blue_gain_76_2019-02-27_210536_frame8_-15C.fit" saved.  HFR = 2.72.)...
[02/27/19 21:07:13.638][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:07:13.638][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:2; f:7; o:
[02/27/19 21:07:13.638][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:07:13.638][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:07:13.638][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:07:13.739][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:07:13.739][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:07:13.739][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:2; f:7; o:
[02/27/19 21:07:13.739][DEBUG] [Sequence Thread] EventMarker 18 - t:m81 (1); e:2; f:7; o:
[02/27/19 21:07:13.747][DEBUG] [Sequence Thread] EventMarker 19 - t:m81 (1); e:2; f:8; o:
[02/27/19 21:07:13.747][DEBUG] [Sequence Thread] EventMarker 20 - t:m81 (1); e:2; f:8; o:
[02/27/19 21:07:13.747][DEBUG] [Sequence Thread] Running post event...
[02/27/19 21:07:13.747][DEBUG] [Sequence Thread] EventMarker 21 - t:m81 (1); e:2; f:8; o:
[02/27/19 21:07:13.750][DEBUG] [Sequence Thread] Incremented numComplete (8) for event[2]...
[02/27/19 21:07:13.752][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:07:13.752][DEBUG] [Sequence Thread] Current event[2] frame count: 8/60...
[02/27/19 21:07:13.752][DEBUG] [Sequence Thread] Looking at event[3]...
[02/27/19 21:07:13.752][DEBUG] [Sequence Thread] Found event event[3] with remaining frames.
[02/27/19 21:07:13.752][DEBUG] [Sequence Thread] Event[3] frame count: 7/60...
[02/27/19 21:07:13.752][DEBUG] [Sequence Thread] Getting next event (3)...
[02/27/19 21:07:13.752][DEBUG] [Sequence Thread] Checking for auto manual focus (post)...
[02/27/19 21:07:13.752][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:07:13.764][DEBUG] [Sequence Thread] Attempting to move to next event...
[02/27/19 21:07:13.764][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:07:13.764][DEBUG] [Sequence Thread] Current event[2] frame count: 8/60...
[02/27/19 21:07:13.764][DEBUG] [Sequence Thread] Looking at event[3]...
[02/27/19 21:07:13.764][DEBUG] [Sequence Thread] Found event event[3] with remaining frames.
[02/27/19 21:07:13.764][DEBUG] [Sequence Thread] Event[3] frame count: 7/60...
[02/27/19 21:07:13.764][DEBUG] [Sequence Thread] Getting next event (3)...
[02/27/19 21:07:13.764][DEBUG] [Sequence Thread] Running pre event...
[02/27/19 21:07:13.779][DEBUG] [Sequence Thread] Current target has end time at 28/02/2019 06:30:00
[02/27/19 21:07:13.779][DEBUG] [Sequence Thread] End time of next frame is at 27/02/2019 21:08:43
[02/27/19 21:07:13.779][DEBUG] [Sequence Thread] Target is still before end time, continuing...
[02/27/19 21:07:13.779][DEBUG] [Sequence Thread] Running capture event...
[02/27/19 21:07:13.781][DEBUG] [Sequence Thread] ------------- Starting capture frame for event[3] -------------
[02/27/19 21:07:13.788][DEBUG] [Sequence Thread] Sending commands...
[02/27/19 21:07:13.788][DEBUG] [Sequence Thread] SetFlatBox: Frame Type is Light
[02/27/19 21:07:13.788][DEBUG] [Sequence Thread] EventMarker 2 - t:m81 (1); e:3; f:7; o:
[02/27/19 21:07:13.788][DEBUG] [Sequence Thread] Checking if Meridian Flip is needed
[02/27/19 21:07:13.788][DEBUG] [Sequence Thread] Telescope is on the West side of the mount
[02/27/19 21:07:13.788][DEBUG] [Sequence Thread] Meridian Flip not needed, Hour Angle < Degrees Past To Flip: -39.5533241944463 < 0
[02/27/19 21:07:13.788][DEBUG] [Sequence Thread] EventMarker 3 - t:m81 (1); e:3; f:7; o:
[02/27/19 21:07:13.789][DEBUG] [Sequence Thread] EventMarker 4 - t:m81 (1); e:3; f:7; o:
[02/27/19 21:07:13.789][DEBUG] [Sequence Thread] Setting filter position 2...
[02/27/19 21:07:13.796][DEBUG] [Sequence Thread] Setting filter: Red...
[02/27/19 21:07:13.796][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 1...
[02/27/19 21:07:13.796][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 1 is complete...
[02/27/19 21:07:13.998][DEBUG] [Sequence Thread] Adjust focuser pos per filter: Moving focsuer to focus position (64697)...
[02/27/19 21:07:13.998][DEBUG] [Sequence Thread] Adjust focuser pos per filter
[02/27/19 21:07:13.998][DEBUG] [Sequence Thread] Old filter: Blue; Focus pos: 64704
[02/27/19 21:07:13.998][DEBUG] [Sequence Thread] New filter: Red; Focus pos: 64697
[02/27/19 21:07:13.998][DEBUG] [Sequence Thread] Pos delta: -7 steps
[02/27/19 21:07:13.998][DEBUG] [Sequence Thread] New position-> (current: 4852) + (delta: -7) = 4845
[02/27/19 21:07:13.999][DEBUG] [Sequence Thread] Focuser moving to 4845
[02/27/19 21:07:14.634][DEBUG] [Sequence Thread] Focuser move call complete
[02/27/19 21:07:14.645][DEBUG] [Sequence Thread] Focuser position matches requested position (4845), continuing...
[02/27/19 21:07:14.645][DEBUG] [Sequence Thread] focuser move is complete...
[02/27/19 21:07:14.647][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 2...
[02/27/19 21:07:17.649][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 2 complete...
[02/27/19 21:07:17.657][DEBUG] [Sequence Thread] EventMarker 5 - t:m81 (1); e:3; f:7; o:
[02/27/19 21:07:17.657][DEBUG] [Sequence Thread] Checking for auto manual focus (pre)...
[02/27/19 21:07:17.657][DEBUG] [Sequence Thread] EventMarker 6 - t:m81 (1); e:3; f:7; o:
[02/27/19 21:07:17.668][DEBUG] [Sequence Thread] Autoguider will not dither this frame. Total frames is not a modulus of 5
[02/27/19 21:07:17.668][DEBUG] [Sequence Thread] EventMarker 1 - t:m81 (1); e:3; f:7; o:
[02/27/19 21:07:17.669][DEBUG] [Sequence Thread] Created base name for frame capture: m81_Light_90sec_1x1__Red_gain_76_2019-02-27_210717_frame8_-15C
[02/27/19 21:07:17.669][DEBUG] [Sequence Thread] Created directory for frame capture: C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\
[02/27/19 21:07:17.669][DEBUG] [Sequence Thread] EventMarker 7 - t:m81 (1); e:3; f:7; o:
[02/27/19 21:07:17.669][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:07:17.669][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:3; f:7; o:
[02/27/19 21:07:17.669][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:07:17.669][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:07:17.669][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:07:17.770][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:07:17.770][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:07:17.770][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:3; f:7; o:
[02/27/19 21:07:17.770][DEBUG] [Sequence Thread] {"method": "guide", "params": [{"pixels": 0.5, "time": 1, "timeout": 600}, false ], "id": 1003}
[02/27/19 21:07:17.770][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "guide", "params": [{"pixels": 0.5, "time": 1, "timeout": 600}, false ], "id": 1003}

[02/27/19 21:07:17.770][DEBUG] [Sequence Thread] EventMarker 172 - t:m81 (1); e:3; f:7; o:
[02/27/19 21:07:17.770][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:07:17.770][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:07:17.770][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:07:17.852][DEBUG] [PHD2 Listener Thread] Unknown object from PHD2: {"Event":"SettleBegin","Timestamp":1551301637.802,"Host":"JGL2_2","Inst":1}
[02/27/19 21:07:17.871][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:07:17.871][DEBUG] [Sequence Thread] EventMarker 173 - t:m81 (1); e:3; f:7; o:
[02/27/19 21:07:17.872][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Attempting to settle the auto guider...
[02/27/19 21:07:17.872][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Attempting to settle the auto guider...)...
[02/27/19 21:07:17.872][DEBUG] [Sequence Thread] Waiting for Auto Guider distance to fall below 0.5
[02/27/19 21:07:17.872][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:07:17.872][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:07:17.883][DEBUG] [Sequence Thread] Distance is below 0.5, starting timer...
[02/27/19 21:07:18.384][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:07:18.384][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:07:18.891][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:07:18.891][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:07:18.894][DEBUG] [Sequence Thread] Distance stayed below 0.5 for 1 seconds, done settling...
[02/27/19 21:07:18.894][DEBUG] [Sequence Thread] SGPro settle criteria have been met, but the guider reports it is not ready to resume, waiting...
[02/27/19 21:07:20.478][DEBUG] [PHD2 Listener Thread] PHD2: Settle done received: GOOD
[02/27/19 21:07:20.848][DEBUG] [Sequence Thread] Auto guider has settled...
[02/27/19 21:07:20.849][DEBUG] [Sequence Thread] EventMarker 8 - t:m81 (1); e:3; f:7; o:
[02/27/19 21:07:20.849][DEBUG] [Sequence Thread] EventMarker 9 - t:m81 (1); e:3; f:7; o:
[02/27/19 21:07:20.849][DEBUG] [Sequence Thread] EventMarker 10 - t:m81 (1); e:3; f:7; o:
[02/27/19 21:07:20.849][DEBUG] [Sequence Thread] Finished sending frame capture.  Entering wait mode...
[02/27/19 21:07:20.849][DEBUG] [Sequence Thread] EventMarker 11 - t:m81 (1); e:3; f:7; o:
[02/27/19 21:07:20.849][DEBUG] [Sequence Thread] EventMarker 12 - t:m81 (1); e:3; f:7; o:
[02/27/19 21:07:20.855][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE message received...
[02/27/19 21:07:20.856][DEBUG] [Camera Thread] SetAscomGain to 76
[02/27/19 21:07:20.857][DEBUG] [Camera Thread] Camera gain set to 76
[02/27/19 21:07:20.857][DEBUG] [Camera Thread] SetAscomNormalSpeed... 
[02/27/19 21:07:20.858][DEBUG] [Camera Thread] Cannot set readout speed, not supported by camera...
[02/27/19 21:07:20.859][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Starting integration of m81; Event 4; Frame 8 for 90s...
[02/27/19 21:07:20.859][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Starting integration of m81; Event 4; Frame 8 for 90s...)...
[02/27/19 21:07:20.859][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, TimedError): (2019-02-25) Failure while integrating m81; Event 4; Frame 8 for 90s. Image has not downloaded in alloted time period.
[02/27/19 21:07:20.859][DEBUG] [Sequence Thread] GNS: Sent timed event to GNS...
[02/27/19 21:07:20.861][DEBUG] [Sequence Thread] EventMarker 13 - t:m81 (1); e:3; f:7; o:
[02/27/19 21:07:45.196][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:07:45.207][DEBUG] [MF Update Thread] Performing serialize...
[02/27/19 21:08:50.941][DEBUG] [Sequence Thread] EventMarker 15 - t:m81 (1); e:3; f:7; o:
[02/27/19 21:08:50.943][DEBUG] [Sequence Thread] Waking from exposure time sleep period...
[02/27/19 21:08:50.944][DEBUG] [Sequence Thread] Checking to see if the CCD has a temp...
[02/27/19 21:08:50.944][DEBUG] [Sequence Thread] Saving the CCD temp...
[02/27/19 21:08:50.951][DEBUG] [Sequence Thread] Entering super dangerous loop to await image completion...
[02/27/19 21:08:50.952][DEBUG] [Sequence Thread] EventMarker 16 - t:m81 (1); e:3; f:7; o:
[02/27/19 21:08:52.093][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE complete...
[02/27/19 21:08:52.458][DEBUG] [Sequence Thread] EventMarker 17 - t:m81 (1); e:3; f:7; o:
[02/27/19 21:08:52.458][DEBUG] [Sequence Thread] Image reported as complete.  Continuing...
[02/27/19 21:08:52.458][DEBUG] [Sequence Thread] Collecting FITs headers...
[02/27/19 21:08:52.459][DEBUG] [Sequence Thread] ASCOM Camera: Could not get last exposure start time.  Reported as (unknown)
[02/27/19 21:08:52.459][DEBUG] [Sequence Thread] DATE-LOC time provided by SGPro (failed to retrieve valid entry from camera)...
[02/27/19 21:08:52.461][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info for last solve...
[02/27/19 21:08:52.461][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info from UI...
[02/27/19 21:08:52.462][DEBUG] [Sequence Thread] Clearing timed monitoring events...
[02/27/19 21:08:52.468][DEBUG] [Sequence Thread] Created full file name (file does not exist): C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\m81_Light_90sec_1x1__Red_gain_76_2019-02-27_210717_frame8_-15C.fit
[02/27/19 21:08:52.468][DEBUG] [Sequence Thread] SaveFileAscom: Start...
[02/27/19 21:08:52.468][DEBUG] [Sequence Thread] SaveFileAscom: Checking image data...
[02/27/19 21:08:52.468][DEBUG] [Sequence Thread] SaveFileAscom: Create normal preview bitmap...
[02/27/19 21:08:52.477][DEBUG] [Sequence Thread] SaveFileAscom: Locking preview bits...
[02/27/19 21:08:52.477][DEBUG] [Sequence Thread] SaveFileAscom: Validating file name...
[02/27/19 21:08:52.477][DEBUG] [Sequence Thread] SaveFileAscom: Starting byte traversal...
[02/27/19 21:08:52.660][DEBUG] [Sequence Thread] SaveFileAscom: Unlocking preview bits...
[02/27/19 21:08:52.660][DEBUG] [Sequence Thread] SaveFileAscom: Saving preview bitmap to disk...
[02/27/19 21:08:52.660][DEBUG] [Sequence Thread] SaveFileBmp16: Locking bitmap for disk write...
[02/27/19 21:08:52.660][DEBUG] [Sequence Thread] SaveFileBmp16: Opening file stream...
[02/27/19 21:08:52.661][DEBUG] [Sequence Thread] SaveFileBmp16: Writing FITS headers...
[02/27/19 21:08:52.661][DEBUG] [Sequence Thread] SaveFileBmp16: Traversing and persisting bitmap data...
[02/27/19 21:08:52.836][DEBUG] [Sequence Thread] SaveFileBmp16: FITS block fill...
[02/27/19 21:08:52.836][DEBUG] [Sequence Thread] SaveFileBmp16: Unlocking bitmap...
[02/27/19 21:08:52.836][DEBUG] [Sequence Thread] SaveFileBmp16: Closing file stream
[02/27/19 21:08:52.840][DEBUG] [Sequence Thread] SaveFileAscom: Displaying image preview in UI...
[02/27/19 21:08:52.840][DEBUG] [Sequence Thread] Internal Interface: Set Preview...
[02/27/19 21:08:52.840][DEBUG] [Sequence Thread] Display image preview using asynch task...
[02/27/19 21:08:53.763][DEBUG] [Sequence Thread] SaveFileAscom: Done
[02/27/19 21:08:53.763][DEBUG] [Sequence Thread] =========== Save file took 1300 ms
[02/27/19 21:08:53.763][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Image "m81_Light_90sec_1x1__Red_gain_76_2019-02-27_210717_frame8_-15C.fit" saved.  HFR = 2.72.
[02/27/19 21:08:53.763][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Image "m81_Light_90sec_1x1__Red_gain_76_2019-02-27_210717_frame8_-15C.fit" saved.  HFR = 2.72.)...
[02/27/19 21:08:53.766][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:08:53.766][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:3; f:7; o:
[02/27/19 21:08:53.766][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:08:53.766][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:08:53.766][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:08:53.866][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:08:53.866][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:08:53.866][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:3; f:7; o:
[02/27/19 21:08:53.866][DEBUG] [Sequence Thread] EventMarker 18 - t:m81 (1); e:3; f:7; o:
[02/27/19 21:08:53.876][DEBUG] [Sequence Thread] EventMarker 19 - t:m81 (1); e:3; f:8; o:
[02/27/19 21:08:53.876][DEBUG] [Sequence Thread] EventMarker 20 - t:m81 (1); e:3; f:8; o:
[02/27/19 21:08:53.876][DEBUG] [Sequence Thread] Running post event...
[02/27/19 21:08:53.876][DEBUG] [Sequence Thread] EventMarker 21 - t:m81 (1); e:3; f:8; o:
[02/27/19 21:08:53.878][DEBUG] [Sequence Thread] Incremented numComplete (8) for event[3]...
[02/27/19 21:08:53.880][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:08:53.880][DEBUG] [Sequence Thread] Current event[3] frame count: 8/60...
[02/27/19 21:08:53.880][DEBUG] [Sequence Thread] Looking at event[4]...
[02/27/19 21:08:53.880][DEBUG] [Sequence Thread] Found event event[4] with remaining frames.
[02/27/19 21:08:53.880][DEBUG] [Sequence Thread] Event[4] frame count: 7/60...
[02/27/19 21:08:53.880][DEBUG] [Sequence Thread] Getting next event (4)...
[02/27/19 21:08:53.880][DEBUG] [Sequence Thread] Checking for auto manual focus (post)...
[02/27/19 21:08:53.880][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:08:53.892][DEBUG] [Sequence Thread] Attempting to move to next event...
[02/27/19 21:08:53.892][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:08:53.892][DEBUG] [Sequence Thread] Current event[3] frame count: 8/60...
[02/27/19 21:08:53.892][DEBUG] [Sequence Thread] Looking at event[4]...
[02/27/19 21:08:53.892][DEBUG] [Sequence Thread] Found event event[4] with remaining frames.
[02/27/19 21:08:53.892][DEBUG] [Sequence Thread] Event[4] frame count: 7/60...
[02/27/19 21:08:53.892][DEBUG] [Sequence Thread] Getting next event (4)...
[02/27/19 21:08:53.892][DEBUG] [Sequence Thread] Running pre event...
[02/27/19 21:08:53.905][DEBUG] [Sequence Thread] Current target has end time at 28/02/2019 06:30:00
[02/27/19 21:08:53.905][DEBUG] [Sequence Thread] End time of next frame is at 27/02/2019 21:10:23
[02/27/19 21:08:53.905][DEBUG] [Sequence Thread] Target is still before end time, continuing...
[02/27/19 21:08:53.905][DEBUG] [Sequence Thread] Running capture event...
[02/27/19 21:08:53.906][DEBUG] [Sequence Thread] ------------- Starting capture frame for event[4] -------------
[02/27/19 21:08:53.912][DEBUG] [Sequence Thread] Sending commands...
[02/27/19 21:08:53.912][DEBUG] [Sequence Thread] SetFlatBox: Frame Type is Light
[02/27/19 21:08:53.912][DEBUG] [Sequence Thread] EventMarker 2 - t:m81 (1); e:4; f:7; o:
[02/27/19 21:08:53.912][DEBUG] [Sequence Thread] Checking if Meridian Flip is needed
[02/27/19 21:08:53.912][DEBUG] [Sequence Thread] Telescope is on the West side of the mount
[02/27/19 21:08:53.912][DEBUG] [Sequence Thread] Meridian Flip not needed, Hour Angle < Degrees Past To Flip: -39.1364334688026 < 0
[02/27/19 21:08:53.912][DEBUG] [Sequence Thread] EventMarker 3 - t:m81 (1); e:4; f:7; o:
[02/27/19 21:08:53.912][DEBUG] [Sequence Thread] EventMarker 4 - t:m81 (1); e:4; f:7; o:
[02/27/19 21:08:53.912][DEBUG] [Sequence Thread] Setting filter position 3...
[02/27/19 21:08:53.919][DEBUG] [Sequence Thread] Setting filter: Green...
[02/27/19 21:08:53.919][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 1...
[02/27/19 21:08:53.919][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 1 is complete...
[02/27/19 21:08:54.122][DEBUG] [Sequence Thread] Adjust focuser pos per filter: Moving focsuer to focus position (64679)...
[02/27/19 21:08:54.122][DEBUG] [Sequence Thread] Adjust focuser pos per filter
[02/27/19 21:08:54.122][DEBUG] [Sequence Thread] Old filter: Red; Focus pos: 64697
[02/27/19 21:08:54.122][DEBUG] [Sequence Thread] New filter: Green; Focus pos: 64679
[02/27/19 21:08:54.122][DEBUG] [Sequence Thread] Pos delta: -18 steps
[02/27/19 21:08:54.122][DEBUG] [Sequence Thread] New position-> (current: 4845) + (delta: -18) = 4827
[02/27/19 21:08:54.122][DEBUG] [Sequence Thread] Focuser moving to 4827
[02/27/19 21:08:54.859][DEBUG] [Sequence Thread] Focuser move call complete
[02/27/19 21:08:54.874][DEBUG] [Sequence Thread] Focuser position matches requested position (4827), continuing...
[02/27/19 21:08:54.874][DEBUG] [Sequence Thread] focuser move is complete...
[02/27/19 21:08:54.877][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 2...
[02/27/19 21:08:56.878][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 2 complete...
[02/27/19 21:08:56.889][DEBUG] [Sequence Thread] EventMarker 5 - t:m81 (1); e:4; f:7; o:
[02/27/19 21:08:56.889][DEBUG] [Sequence Thread] Checking for auto manual focus (pre)...
[02/27/19 21:08:56.889][DEBUG] [Sequence Thread] EventMarker 6 - t:m81 (1); e:4; f:7; o:
[02/27/19 21:08:56.897][DEBUG] [Sequence Thread] Autoguider will not dither this frame. Total frames is not a modulus of 5
[02/27/19 21:08:56.897][DEBUG] [Sequence Thread] EventMarker 1 - t:m81 (1); e:4; f:7; o:
[02/27/19 21:08:56.897][DEBUG] [Sequence Thread] Created base name for frame capture: m81_Light_90sec_1x1__Green_gain_76_2019-02-27_210856_frame8_-15C
[02/27/19 21:08:56.897][DEBUG] [Sequence Thread] Created directory for frame capture: C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\
[02/27/19 21:08:56.897][DEBUG] [Sequence Thread] EventMarker 7 - t:m81 (1); e:4; f:7; o:
[02/27/19 21:08:56.897][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:08:56.897][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:4; f:7; o:
[02/27/19 21:08:56.897][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:08:56.898][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:08:56.898][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:08:56.999][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:08:56.999][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:08:56.999][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:4; f:7; o:
[02/27/19 21:08:56.999][DEBUG] [Sequence Thread] {"method": "guide", "params": [{"pixels": 0.5, "time": 1, "timeout": 600}, false ], "id": 1003}
[02/27/19 21:08:56.999][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "guide", "params": [{"pixels": 0.5, "time": 1, "timeout": 600}, false ], "id": 1003}

[02/27/19 21:08:56.999][DEBUG] [Sequence Thread] EventMarker 172 - t:m81 (1); e:4; f:7; o:
[02/27/19 21:08:56.999][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:08:56.999][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:08:56.999][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:08:57.084][DEBUG] [PHD2 Listener Thread] Unknown object from PHD2: {"Event":"SettleBegin","Timestamp":1551301737.034,"Host":"JGL2_2","Inst":1}
[02/27/19 21:08:57.100][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:08:57.100][DEBUG] [Sequence Thread] EventMarker 173 - t:m81 (1); e:4; f:7; o:
[02/27/19 21:08:57.100][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Attempting to settle the auto guider...
[02/27/19 21:08:57.100][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Attempting to settle the auto guider...)...
[02/27/19 21:08:57.100][DEBUG] [Sequence Thread] Waiting for Auto Guider distance to fall below 0.5
[02/27/19 21:08:57.100][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:08:57.100][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:08:57.112][DEBUG] [Sequence Thread] Distance is below 0.5, starting timer...
[02/27/19 21:08:57.612][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:08:57.612][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:08:58.121][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:08:58.121][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:08:58.126][DEBUG] [Sequence Thread] Distance stayed below 0.5 for 1 seconds, done settling...
[02/27/19 21:08:58.127][DEBUG] [Sequence Thread] SGPro settle criteria have been met, but the guider reports it is not ready to resume, waiting...
[02/27/19 21:09:00.267][DEBUG] [PHD2 Listener Thread] PHD2: Settle done received: GOOD
[02/27/19 21:09:00.449][DEBUG] [Sequence Thread] Auto guider has settled...
[02/27/19 21:09:00.449][DEBUG] [Sequence Thread] EventMarker 8 - t:m81 (1); e:4; f:7; o:
[02/27/19 21:09:00.449][DEBUG] [Sequence Thread] EventMarker 9 - t:m81 (1); e:4; f:7; o:
[02/27/19 21:09:00.450][DEBUG] [Sequence Thread] EventMarker 10 - t:m81 (1); e:4; f:7; o:
[02/27/19 21:09:00.450][DEBUG] [Sequence Thread] Finished sending frame capture.  Entering wait mode...
[02/27/19 21:09:00.450][DEBUG] [Sequence Thread] EventMarker 11 - t:m81 (1); e:4; f:7; o:
[02/27/19 21:09:00.450][DEBUG] [Sequence Thread] EventMarker 12 - t:m81 (1); e:4; f:7; o:
[02/27/19 21:09:00.455][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE message received...
[02/27/19 21:09:00.457][DEBUG] [Camera Thread] SetAscomGain to 76
[02/27/19 21:09:00.458][DEBUG] [Camera Thread] Camera gain set to 76
[02/27/19 21:09:00.458][DEBUG] [Camera Thread] SetAscomNormalSpeed... 
[02/27/19 21:09:00.458][DEBUG] [Camera Thread] Cannot set readout speed, not supported by camera...
[02/27/19 21:09:00.461][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Starting integration of m81; Event 5; Frame 8 for 90s...
[02/27/19 21:09:00.461][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Starting integration of m81; Event 5; Frame 8 for 90s...)...
[02/27/19 21:09:00.461][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, TimedError): (2019-02-25) Failure while integrating m81; Event 5; Frame 8 for 90s. Image has not downloaded in alloted time period.
[02/27/19 21:09:00.461][DEBUG] [Sequence Thread] GNS: Sent timed event to GNS...
[02/27/19 21:09:00.462][DEBUG] [Sequence Thread] EventMarker 13 - t:m81 (1); e:4; f:7; o:
[02/27/19 21:09:08.122][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:09:08.139][DEBUG] [MF Update Thread] Performing serialize...
[02/27/19 21:10:30.445][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:10:30.464][DEBUG] [MF Update Thread] Performing serialize...
[02/27/19 21:10:30.632][DEBUG] [Sequence Thread] EventMarker 15 - t:m81 (1); e:4; f:7; o:
[02/27/19 21:10:30.635][DEBUG] [Sequence Thread] Waking from exposure time sleep period...
[02/27/19 21:10:30.635][DEBUG] [Sequence Thread] Checking to see if the CCD has a temp...
[02/27/19 21:10:30.635][DEBUG] [Sequence Thread] Saving the CCD temp...
[02/27/19 21:10:30.641][DEBUG] [Sequence Thread] Entering super dangerous loop to await image completion...
[02/27/19 21:10:30.648][DEBUG] [Sequence Thread] EventMarker 16 - t:m81 (1); e:4; f:7; o:
[02/27/19 21:10:31.718][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE complete...
[02/27/19 21:10:32.164][DEBUG] [Sequence Thread] EventMarker 17 - t:m81 (1); e:4; f:7; o:
[02/27/19 21:10:32.164][DEBUG] [Sequence Thread] Image reported as complete.  Continuing...
[02/27/19 21:10:32.164][DEBUG] [Sequence Thread] Collecting FITs headers...
[02/27/19 21:10:32.164][DEBUG] [Sequence Thread] ASCOM Camera: Could not get last exposure start time.  Reported as (unknown)
[02/27/19 21:10:32.164][DEBUG] [Sequence Thread] DATE-LOC time provided by SGPro (failed to retrieve valid entry from camera)...
[02/27/19 21:10:32.165][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info for last solve...
[02/27/19 21:10:32.165][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info from UI...
[02/27/19 21:10:32.165][DEBUG] [Sequence Thread] Clearing timed monitoring events...
[02/27/19 21:10:32.168][DEBUG] [Sequence Thread] Created full file name (file does not exist): C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\m81_Light_90sec_1x1__Green_gain_76_2019-02-27_210856_frame8_-15C.fit
[02/27/19 21:10:32.168][DEBUG] [Sequence Thread] SaveFileAscom: Start...
[02/27/19 21:10:32.168][DEBUG] [Sequence Thread] SaveFileAscom: Checking image data...
[02/27/19 21:10:32.168][DEBUG] [Sequence Thread] SaveFileAscom: Create normal preview bitmap...
[02/27/19 21:10:32.174][DEBUG] [Sequence Thread] SaveFileAscom: Locking preview bits...
[02/27/19 21:10:32.174][DEBUG] [Sequence Thread] SaveFileAscom: Validating file name...
[02/27/19 21:10:32.174][DEBUG] [Sequence Thread] SaveFileAscom: Starting byte traversal...
[02/27/19 21:10:32.344][DEBUG] [Sequence Thread] SaveFileAscom: Unlocking preview bits...
[02/27/19 21:10:32.344][DEBUG] [Sequence Thread] SaveFileAscom: Saving preview bitmap to disk...
[02/27/19 21:10:32.344][DEBUG] [Sequence Thread] SaveFileBmp16: Locking bitmap for disk write...
[02/27/19 21:10:32.344][DEBUG] [Sequence Thread] SaveFileBmp16: Opening file stream...
[02/27/19 21:10:32.344][DEBUG] [Sequence Thread] SaveFileBmp16: Writing FITS headers...
[02/27/19 21:10:32.347][DEBUG] [Sequence Thread] SaveFileBmp16: Traversing and persisting bitmap data...
[02/27/19 21:10:32.495][DEBUG] [Sequence Thread] SaveFileBmp16: FITS block fill...
[02/27/19 21:10:32.495][DEBUG] [Sequence Thread] SaveFileBmp16: Unlocking bitmap...
[02/27/19 21:10:32.495][DEBUG] [Sequence Thread] SaveFileBmp16: Closing file stream
[02/27/19 21:10:32.499][DEBUG] [Sequence Thread] SaveFileAscom: Displaying image preview in UI...
[02/27/19 21:10:32.499][DEBUG] [Sequence Thread] Internal Interface: Set Preview...
[02/27/19 21:10:32.499][DEBUG] [Sequence Thread] Display image preview using asynch task...
[02/27/19 21:10:33.278][DEBUG] [Sequence Thread] SaveFileAscom: Done
[02/27/19 21:10:33.278][DEBUG] [Sequence Thread] =========== Save file took 1113 ms
[02/27/19 21:10:33.279][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Image "m81_Light_90sec_1x1__Green_gain_76_2019-02-27_210856_frame8_-15C.fit" saved.  HFR = 2.72.
[02/27/19 21:10:33.279][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Image "m81_Light_90sec_1x1__Green_gain_76_2019-02-27_210856_frame8_-15C.fit" saved.  HFR = 2.72.)...
[02/27/19 21:10:33.283][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:10:33.283][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:4; f:7; o:
[02/27/19 21:10:33.283][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:10:33.283][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:10:33.283][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:10:33.385][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:10:33.385][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:10:33.385][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:4; f:7; o:
[02/27/19 21:10:33.385][DEBUG] [Sequence Thread] EventMarker 18 - t:m81 (1); e:4; f:7; o:
[02/27/19 21:10:33.391][DEBUG] [Sequence Thread] EventMarker 19 - t:m81 (1); e:4; f:8; o:
[02/27/19 21:10:33.391][DEBUG] [Sequence Thread] EventMarker 20 - t:m81 (1); e:4; f:8; o:
[02/27/19 21:10:33.391][DEBUG] [Sequence Thread] Running post event...
[02/27/19 21:10:33.391][DEBUG] [Sequence Thread] EventMarker 21 - t:m81 (1); e:4; f:8; o:
[02/27/19 21:10:33.393][DEBUG] [Sequence Thread] Incremented numComplete (8) for event[4]...
[02/27/19 21:10:33.398][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:10:33.399][DEBUG] [Sequence Thread] Current event[4] frame count: 8/60...
[02/27/19 21:10:33.399][DEBUG] [Sequence Thread] Looking at event[5]...
[02/27/19 21:10:33.399][DEBUG] [Sequence Thread] Looking at event[0]...
[02/27/19 21:10:33.399][DEBUG] [Sequence Thread] Found event event[0] with remaining frames.
[02/27/19 21:10:33.399][DEBUG] [Sequence Thread] Event[0] frame count: 14/120...
[02/27/19 21:10:33.399][DEBUG] [Sequence Thread] Getting next event (0)...
[02/27/19 21:10:33.399][DEBUG] [Sequence Thread] Checking for auto manual focus (post)...
[02/27/19 21:10:33.399][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:10:33.417][DEBUG] [Sequence Thread] Attempting to move to next event...
[02/27/19 21:10:33.417][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:10:33.417][DEBUG] [Sequence Thread] Current event[4] frame count: 8/60...
[02/27/19 21:10:33.417][DEBUG] [Sequence Thread] Looking at event[5]...
[02/27/19 21:10:33.417][DEBUG] [Sequence Thread] Looking at event[0]...
[02/27/19 21:10:33.417][DEBUG] [Sequence Thread] Found event event[0] with remaining frames.
[02/27/19 21:10:33.417][DEBUG] [Sequence Thread] Event[0] frame count: 14/120...
[02/27/19 21:10:33.417][DEBUG] [Sequence Thread] Getting next event (0)...
[02/27/19 21:10:33.417][DEBUG] [Sequence Thread] Running pre event...
[02/27/19 21:10:33.449][DEBUG] [Sequence Thread] Current target has end time at 28/02/2019 06:30:00
[02/27/19 21:10:33.449][DEBUG] [Sequence Thread] End time of next frame is at 27/02/2019 21:11:03
[02/27/19 21:10:33.449][DEBUG] [Sequence Thread] Target is still before end time, continuing...
[02/27/19 21:10:33.449][DEBUG] [Sequence Thread] Running capture event...
[02/27/19 21:10:33.451][DEBUG] [Sequence Thread] ------------- Starting capture frame for event[0] -------------
[02/27/19 21:10:33.473][DEBUG] [Sequence Thread] Sending commands...
[02/27/19 21:10:33.473][DEBUG] [Sequence Thread] SetFlatBox: Frame Type is Light
[02/27/19 21:10:33.473][DEBUG] [Sequence Thread] EventMarker 2 - t:m81 (1); e:0; f:14; o:
[02/27/19 21:10:33.473][DEBUG] [Sequence Thread] Checking if Meridian Flip is needed
[02/27/19 21:10:33.473][DEBUG] [Sequence Thread] Telescope is on the West side of the mount
[02/27/19 21:10:33.473][DEBUG] [Sequence Thread] Meridian Flip not needed, Hour Angle < Degrees Past To Flip: -38.7181677431588 < 0
[02/27/19 21:10:33.473][DEBUG] [Sequence Thread] EventMarker 3 - t:m81 (1); e:0; f:14; o:
[02/27/19 21:10:33.473][DEBUG] [Sequence Thread] EventMarker 4 - t:m81 (1); e:0; f:14; o:
[02/27/19 21:10:33.473][DEBUG] [Sequence Thread] Setting filter position 1...
[02/27/19 21:10:33.480][DEBUG] [Sequence Thread] Setting filter: Lum...
[02/27/19 21:10:33.480][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 1...
[02/27/19 21:10:33.480][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 1 is complete...
[02/27/19 21:10:33.682][DEBUG] [Sequence Thread] Adjust focuser pos per filter: Moving focsuer to focus position (64700)...
[02/27/19 21:10:33.682][DEBUG] [Sequence Thread] Adjust focuser pos per filter
[02/27/19 21:10:33.682][DEBUG] [Sequence Thread] Old filter: Green; Focus pos: 64679
[02/27/19 21:10:33.682][DEBUG] [Sequence Thread] New filter: Lum; Focus pos: 64700
[02/27/19 21:10:33.682][DEBUG] [Sequence Thread] Pos delta: 21 steps
[02/27/19 21:10:33.682][DEBUG] [Sequence Thread] New position-> (current: 4827) + (delta: 21) = 4848
[02/27/19 21:10:33.682][DEBUG] [Sequence Thread] Focuser moving to 4848
[02/27/19 21:10:34.456][DEBUG] [Sequence Thread] Focuser move call complete
[02/27/19 21:10:34.494][DEBUG] [Sequence Thread] Focuser position matches requested position (4848), continuing...
[02/27/19 21:10:34.494][DEBUG] [Sequence Thread] focuser move is complete...
[02/27/19 21:10:34.496][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 2...
[02/27/19 21:10:37.497][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 2 complete...
[02/27/19 21:10:37.512][DEBUG] [Sequence Thread] EventMarker 5 - t:m81 (1); e:0; f:14; o:
[02/27/19 21:10:37.512][DEBUG] [Sequence Thread] Checking for auto manual focus (pre)...
[02/27/19 21:10:37.512][DEBUG] [Sequence Thread] EventMarker 6 - t:m81 (1); e:0; f:14; o:
[02/27/19 21:10:37.528][DEBUG] [Sequence Thread] Running dither...
[02/27/19 21:10:37.540][DEBUG] [Sequence Thread] PHD2 dither request: 1...
[02/27/19 21:10:37.541][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:10:37.541][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:10:37.541][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:10:37.641][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:10:38.642][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:10:38.642][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:10:38.642][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:10:38.742][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:10:39.743][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:10:39.743][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:10:39.743][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:10:39.844][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:10:40.844][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:10:40.844][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:10:40.844][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:10:40.944][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:10:41.945][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:10:41.945][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:10:41.945][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:10:42.046][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:10:42.046][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:10:42.046][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:10:42.046][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:10:42.147][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:10:42.147][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "dither", "params": [1, false, {"pixels": 0.5, "time": 0, "timeout": 600}], "id": 1002}

[02/27/19 21:10:42.149][DEBUG] [Sequence Thread] EventMarker 1 - t:m81 (1); e:0; f:14; o:
[02/27/19 21:10:42.151][DEBUG] [Sequence Thread] Created base name for frame capture: m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_211042_frame15_-15C
[02/27/19 21:10:42.151][DEBUG] [Sequence Thread] Created directory for frame capture: C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\
[02/27/19 21:10:42.151][DEBUG] [Sequence Thread] EventMarker 7 - t:m81 (1); e:0; f:14; o:
[02/27/19 21:10:42.151][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:10:42.151][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:0; f:14; o:
[02/27/19 21:10:42.151][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:10:42.151][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:10:42.151][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:10:42.225][DEBUG] [PHD2 Listener Thread] Unknown object from PHD2: {"Event":"SettleBegin","Timestamp":1551301842.180,"Host":"JGL2_2","Inst":1}
[02/27/19 21:10:42.252][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:10:42.252][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:10:42.252][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:0; f:14; o:
[02/27/19 21:10:42.254][DEBUG] [Sequence Thread] {"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}
[02/27/19 21:10:42.254][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}

[02/27/19 21:10:42.254][DEBUG] [Sequence Thread] EventMarker 172 - t:m81 (1); e:0; f:14; o:
[02/27/19 21:10:42.254][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:10:42.254][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:10:42.254][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:10:42.326][DEBUG] [PHD2 Listener Thread] Error received from RPC: Cannot initiate guide while dither is in progress
[02/27/19 21:10:42.354][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:10:42.354][DEBUG] [Sequence Thread] EventMarker 173 - t:m81 (1); e:0; f:14; o:
[02/27/19 21:10:42.355][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Attempting to settle the auto guider...
[02/27/19 21:10:42.355][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Attempting to settle the auto guider...)...
[02/27/19 21:10:42.355][DEBUG] [Sequence Thread] Waiting for Auto Guider distance to fall below 0.5
[02/27/19 21:10:42.355][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:10:42.355][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:10:42.363][DEBUG] [Sequence Thread] Distance is below 0.5, starting timer...
[02/27/19 21:10:42.864][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:10:42.864][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:10:42.875][DEBUG] [Sequence Thread] Distance stayed below 0.5 for 0 seconds, done settling...
[02/27/19 21:10:42.876][DEBUG] [Sequence Thread] SGPro settle criteria have been met, but the guider reports it is not ready to resume, waiting...
[02/27/19 21:10:44.292][DEBUG] [PHD2 Listener Thread] PHD2: Settle done received: GOOD
[02/27/19 21:10:44.386][DEBUG] [Sequence Thread] Auto guider has settled...
[02/27/19 21:10:44.386][DEBUG] [Sequence Thread] EventMarker 8 - t:m81 (1); e:0; f:14; o:
[02/27/19 21:10:44.386][DEBUG] [Sequence Thread] EventMarker 9 - t:m81 (1); e:0; f:14; o:
[02/27/19 21:10:44.386][DEBUG] [Sequence Thread] EventMarker 10 - t:m81 (1); e:0; f:14; o:
[02/27/19 21:10:44.386][DEBUG] [Sequence Thread] Finished sending frame capture.  Entering wait mode...
[02/27/19 21:10:44.386][DEBUG] [Sequence Thread] EventMarker 11 - t:m81 (1); e:0; f:14; o:
[02/27/19 21:10:44.386][DEBUG] [Sequence Thread] EventMarker 12 - t:m81 (1); e:0; f:14; o:
[02/27/19 21:10:44.392][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Starting integration of m81; Event 1; Frame 15 for 30s...
[02/27/19 21:10:44.392][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Starting integration of m81; Event 1; Frame 15 for 30s...)...
[02/27/19 21:10:44.393][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, TimedError): (2019-02-25) Failure while integrating m81; Event 1; Frame 15 for 30s. Image has not downloaded in alloted time period.
[02/27/19 21:10:44.393][DEBUG] [Sequence Thread] GNS: Sent timed event to GNS...
[02/27/19 21:10:44.393][DEBUG] [Sequence Thread] EventMarker 13 - t:m81 (1); e:0; f:14; o:
[02/27/19 21:10:44.397][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE message received...
[02/27/19 21:10:44.398][DEBUG] [Camera Thread] SetAscomGain to 76
[02/27/19 21:10:44.399][DEBUG] [Camera Thread] Camera gain set to 76
[02/27/19 21:10:44.399][DEBUG] [Camera Thread] SetAscomNormalSpeed... 
[02/27/19 21:10:44.399][DEBUG] [Camera Thread] Cannot set readout speed, not supported by camera...
[02/27/19 21:11:14.477][DEBUG] [Sequence Thread] EventMarker 15 - t:m81 (1); e:0; f:14; o:
[02/27/19 21:11:14.481][DEBUG] [Sequence Thread] Waking from exposure time sleep period...
[02/27/19 21:11:14.481][DEBUG] [Sequence Thread] Checking to see if the CCD has a temp...
[02/27/19 21:11:14.481][DEBUG] [Sequence Thread] Saving the CCD temp...
[02/27/19 21:11:14.489][DEBUG] [Sequence Thread] Entering super dangerous loop to await image completion...
[02/27/19 21:11:14.491][DEBUG] [Sequence Thread] EventMarker 16 - t:m81 (1); e:0; f:14; o:
[02/27/19 21:11:15.529][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE complete...
[02/27/19 21:11:16.350][DEBUG] [Sequence Thread] EventMarker 17 - t:m81 (1); e:0; f:14; o:
[02/27/19 21:11:16.350][DEBUG] [Sequence Thread] Image reported as complete.  Continuing...
[02/27/19 21:11:16.350][DEBUG] [Sequence Thread] Collecting FITs headers...
[02/27/19 21:11:16.351][DEBUG] [Sequence Thread] ASCOM Camera: Could not get last exposure start time.  Reported as (unknown)
[02/27/19 21:11:16.351][DEBUG] [Sequence Thread] DATE-LOC time provided by SGPro (failed to retrieve valid entry from camera)...
[02/27/19 21:11:16.352][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info for last solve...
[02/27/19 21:11:16.352][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info from UI...
[02/27/19 21:11:16.356][DEBUG] [Sequence Thread] Clearing timed monitoring events...
[02/27/19 21:11:16.361][DEBUG] [Sequence Thread] Created full file name (file does not exist): C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_211042_frame15_-15C.fit
[02/27/19 21:11:16.361][DEBUG] [Sequence Thread] SaveFileAscom: Start...
[02/27/19 21:11:16.361][DEBUG] [Sequence Thread] SaveFileAscom: Checking image data...
[02/27/19 21:11:16.361][DEBUG] [Sequence Thread] SaveFileAscom: Create normal preview bitmap...
[02/27/19 21:11:16.368][DEBUG] [Sequence Thread] SaveFileAscom: Locking preview bits...
[02/27/19 21:11:16.368][DEBUG] [Sequence Thread] SaveFileAscom: Validating file name...
[02/27/19 21:11:16.368][DEBUG] [Sequence Thread] SaveFileAscom: Starting byte traversal...
[02/27/19 21:11:16.552][DEBUG] [Sequence Thread] SaveFileAscom: Unlocking preview bits...
[02/27/19 21:11:16.552][DEBUG] [Sequence Thread] SaveFileAscom: Saving preview bitmap to disk...
[02/27/19 21:11:16.552][DEBUG] [Sequence Thread] SaveFileBmp16: Locking bitmap for disk write...
[02/27/19 21:11:16.552][DEBUG] [Sequence Thread] SaveFileBmp16: Opening file stream...
[02/27/19 21:11:16.553][DEBUG] [Sequence Thread] SaveFileBmp16: Writing FITS headers...
[02/27/19 21:11:16.554][DEBUG] [Sequence Thread] SaveFileBmp16: Traversing and persisting bitmap data...
[02/27/19 21:11:16.716][DEBUG] [Sequence Thread] SaveFileBmp16: FITS block fill...
[02/27/19 21:11:16.716][DEBUG] [Sequence Thread] SaveFileBmp16: Unlocking bitmap...
[02/27/19 21:11:16.716][DEBUG] [Sequence Thread] SaveFileBmp16: Closing file stream
[02/27/19 21:11:16.716][DEBUG] [Sequence Thread] SaveFileAscom: Displaying image preview in UI...
[02/27/19 21:11:16.716][DEBUG] [Sequence Thread] Internal Interface: Set Preview...
[02/27/19 21:11:16.716][DEBUG] [Sequence Thread] Display image preview using asynch task...
[02/27/19 21:11:17.633][DEBUG] [Sequence Thread] SaveFileAscom: Done
[02/27/19 21:11:17.633][DEBUG] [Sequence Thread] =========== Save file took 1276 ms
[02/27/19 21:11:17.633][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_211042_frame15_-15C.fit" saved.  HFR = 2.72.
[02/27/19 21:11:17.633][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_211042_frame15_-15C.fit" saved.  HFR = 2.72.)...
[02/27/19 21:11:17.638][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:11:17.638][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:0; f:14; o:
[02/27/19 21:11:17.638][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:11:17.638][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:11:17.638][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:11:17.739][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:11:17.739][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:11:17.739][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:0; f:14; o:
[02/27/19 21:11:17.739][DEBUG] [Sequence Thread] EventMarker 18 - t:m81 (1); e:0; f:14; o:
[02/27/19 21:11:17.745][DEBUG] [Sequence Thread] EventMarker 19 - t:m81 (1); e:0; f:15; o:
[02/27/19 21:11:17.745][DEBUG] [Sequence Thread] EventMarker 20 - t:m81 (1); e:0; f:15; o:
[02/27/19 21:11:17.745][DEBUG] [Sequence Thread] Running post event...
[02/27/19 21:11:17.745][DEBUG] [Sequence Thread] EventMarker 21 - t:m81 (1); e:0; f:15; o:
[02/27/19 21:11:17.748][DEBUG] [Sequence Thread] Incremented numComplete (15) for event[0]...
[02/27/19 21:11:17.751][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:11:17.751][DEBUG] [Sequence Thread] Current event[0] frame count: 15/120...
[02/27/19 21:11:17.751][DEBUG] [Sequence Thread] Current event event[0] has remaining frames.  Returning current event.
[02/27/19 21:11:17.751][DEBUG] [Sequence Thread] Checking for auto manual focus (post)...
[02/27/19 21:11:17.758][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:11:17.772][DEBUG] [Sequence Thread] Attempting to move to next event...
[02/27/19 21:11:17.773][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:11:17.773][DEBUG] [Sequence Thread] Current event[0] frame count: 15/120...
[02/27/19 21:11:17.773][DEBUG] [Sequence Thread] Current event event[0] has remaining frames.  Returning current event.
[02/27/19 21:11:17.773][DEBUG] [Sequence Thread] Running pre event...
[02/27/19 21:11:17.785][DEBUG] [Sequence Thread] Current target has end time at 28/02/2019 06:30:00
[02/27/19 21:11:17.785][DEBUG] [Sequence Thread] End time of next frame is at 27/02/2019 21:11:47
[02/27/19 21:11:17.785][DEBUG] [Sequence Thread] Target is still before end time, continuing...
[02/27/19 21:11:17.785][DEBUG] [Sequence Thread] Running capture event...
[02/27/19 21:11:17.787][DEBUG] [Sequence Thread] ------------- Starting capture frame for event[0] -------------
[02/27/19 21:11:17.793][DEBUG] [Sequence Thread] Sending commands...
[02/27/19 21:11:17.793][DEBUG] [Sequence Thread] SetFlatBox: Frame Type is Light
[02/27/19 21:11:17.793][DEBUG] [Sequence Thread] EventMarker 2 - t:m81 (1); e:0; f:15; o:
[02/27/19 21:11:17.793][DEBUG] [Sequence Thread] Checking if Meridian Flip is needed
[02/27/19 21:11:17.793][DEBUG] [Sequence Thread] Telescope is on the West side of the mount
[02/27/19 21:11:17.793][DEBUG] [Sequence Thread] Meridian Flip not needed, Hour Angle < Degrees Past To Flip: -38.53349911014 < 0
[02/27/19 21:11:17.793][DEBUG] [Sequence Thread] EventMarker 3 - t:m81 (1); e:0; f:15; o:
[02/27/19 21:11:17.793][DEBUG] [Sequence Thread] EventMarker 4 - t:m81 (1); e:0; f:15; o:
[02/27/19 21:11:17.793][DEBUG] [Sequence Thread] Setting filter position 1...
[02/27/19 21:11:17.793][DEBUG] [Sequence Thread] Filter position 1 is already set.  Skipping...
[02/27/19 21:11:17.793][DEBUG] [Sequence Thread] EventMarker 5 - t:m81 (1); e:0; f:15; o:
[02/27/19 21:11:17.793][DEBUG] [Sequence Thread] Checking for auto manual focus (pre)...
[02/27/19 21:11:17.793][DEBUG] [Sequence Thread] EventMarker 6 - t:m81 (1); e:0; f:15; o:
[02/27/19 21:11:17.804][DEBUG] [Sequence Thread] Autoguider will not dither this frame. Total frames is not a modulus of 5
[02/27/19 21:11:17.804][DEBUG] [Sequence Thread] EventMarker 1 - t:m81 (1); e:0; f:15; o:
[02/27/19 21:11:17.804][DEBUG] [Sequence Thread] Created base name for frame capture: m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_211117_frame16_-15C
[02/27/19 21:11:17.804][DEBUG] [Sequence Thread] Created directory for frame capture: C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\
[02/27/19 21:11:17.804][DEBUG] [Sequence Thread] EventMarker 7 - t:m81 (1); e:0; f:15; o:
[02/27/19 21:11:17.804][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:11:17.805][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:0; f:15; o:
[02/27/19 21:11:17.805][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:11:17.805][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:11:17.805][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:11:17.906][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:11:17.906][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:11:17.906][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:0; f:15; o:
[02/27/19 21:11:17.906][DEBUG] [Sequence Thread] {"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}
[02/27/19 21:11:17.906][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}

[02/27/19 21:11:17.906][DEBUG] [Sequence Thread] EventMarker 172 - t:m81 (1); e:0; f:15; o:
[02/27/19 21:11:17.906][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:11:17.906][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:11:17.906][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:11:17.971][DEBUG] [PHD2 Listener Thread] Unknown object from PHD2: {"Event":"SettleBegin","Timestamp":1551301877.921,"Host":"JGL2_2","Inst":1}
[02/27/19 21:11:18.007][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:11:18.007][DEBUG] [Sequence Thread] EventMarker 173 - t:m81 (1); e:0; f:15; o:
[02/27/19 21:11:18.007][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Attempting to settle the auto guider...
[02/27/19 21:11:18.007][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Attempting to settle the auto guider...)...
[02/27/19 21:11:18.007][DEBUG] [Sequence Thread] Waiting for Auto Guider distance to fall below 0.5
[02/27/19 21:11:18.007][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:11:18.007][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:11:18.016][DEBUG] [Sequence Thread] Distance is below 0.5, starting timer...
[02/27/19 21:11:18.274][DEBUG] [PHD2 Listener Thread] PHD2: Settle done received: GOOD
[02/27/19 21:11:18.517][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:11:18.517][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:11:18.523][DEBUG] [Sequence Thread] Distance stayed below 0.5 for 0 seconds, done settling...
[02/27/19 21:11:18.523][DEBUG] [Sequence Thread] Auto guider has settled...
[02/27/19 21:11:18.524][DEBUG] [Sequence Thread] EventMarker 8 - t:m81 (1); e:0; f:15; o:
[02/27/19 21:11:18.524][DEBUG] [Sequence Thread] EventMarker 9 - t:m81 (1); e:0; f:15; o:
[02/27/19 21:11:18.524][DEBUG] [Sequence Thread] EventMarker 10 - t:m81 (1); e:0; f:15; o:
[02/27/19 21:11:18.524][DEBUG] [Sequence Thread] Finished sending frame capture.  Entering wait mode...
[02/27/19 21:11:18.524][DEBUG] [Sequence Thread] EventMarker 11 - t:m81 (1); e:0; f:15; o:
[02/27/19 21:11:18.524][DEBUG] [Sequence Thread] EventMarker 12 - t:m81 (1); e:0; f:15; o:
[02/27/19 21:11:18.530][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Starting integration of m81; Event 1; Frame 16 for 30s...
[02/27/19 21:11:18.530][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Starting integration of m81; Event 1; Frame 16 for 30s...)...
[02/27/19 21:11:18.530][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE message received...
[02/27/19 21:11:18.530][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, TimedError): (2019-02-25) Failure while integrating m81; Event 1; Frame 16 for 30s. Image has not downloaded in alloted time period.
[02/27/19 21:11:18.530][DEBUG] [Sequence Thread] GNS: Sent timed event to GNS...
[02/27/19 21:11:18.531][DEBUG] [Sequence Thread] EventMarker 13 - t:m81 (1); e:0; f:15; o:
[02/27/19 21:11:18.531][DEBUG] [Camera Thread] SetAscomGain to 76
[02/27/19 21:11:18.532][DEBUG] [Camera Thread] Camera gain set to 76
[02/27/19 21:11:18.532][DEBUG] [Camera Thread] SetAscomNormalSpeed... 
[02/27/19 21:11:18.532][DEBUG] [Camera Thread] Cannot set readout speed, not supported by camera...
[02/27/19 21:11:48.590][DEBUG] [Sequence Thread] EventMarker 15 - t:m81 (1); e:0; f:15; o:
[02/27/19 21:11:48.592][DEBUG] [Sequence Thread] Waking from exposure time sleep period...
[02/27/19 21:11:48.593][DEBUG] [Sequence Thread] Checking to see if the CCD has a temp...
[02/27/19 21:11:48.593][DEBUG] [Sequence Thread] Saving the CCD temp...
[02/27/19 21:11:48.598][DEBUG] [Sequence Thread] Entering super dangerous loop to await image completion...
[02/27/19 21:11:48.600][DEBUG] [Sequence Thread] EventMarker 16 - t:m81 (1); e:0; f:15; o:
[02/27/19 21:11:49.678][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE complete...
[02/27/19 21:11:50.105][DEBUG] [Sequence Thread] EventMarker 17 - t:m81 (1); e:0; f:15; o:
[02/27/19 21:11:50.105][DEBUG] [Sequence Thread] Image reported as complete.  Continuing...
[02/27/19 21:11:50.105][DEBUG] [Sequence Thread] Collecting FITs headers...
[02/27/19 21:11:50.106][DEBUG] [Sequence Thread] ASCOM Camera: Could not get last exposure start time.  Reported as (unknown)
[02/27/19 21:11:50.106][DEBUG] [Sequence Thread] DATE-LOC time provided by SGPro (failed to retrieve valid entry from camera)...
[02/27/19 21:11:50.107][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info for last solve...
[02/27/19 21:11:50.107][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info from UI...
[02/27/19 21:11:50.107][DEBUG] [Sequence Thread] Clearing timed monitoring events...
[02/27/19 21:11:50.111][DEBUG] [Sequence Thread] Created full file name (file does not exist): C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_211117_frame16_-15C.fit
[02/27/19 21:11:50.111][DEBUG] [Sequence Thread] SaveFileAscom: Start...
[02/27/19 21:11:50.111][DEBUG] [Sequence Thread] SaveFileAscom: Checking image data...
[02/27/19 21:11:50.111][DEBUG] [Sequence Thread] SaveFileAscom: Create normal preview bitmap...
[02/27/19 21:11:50.116][DEBUG] [Sequence Thread] SaveFileAscom: Locking preview bits...
[02/27/19 21:11:50.116][DEBUG] [Sequence Thread] SaveFileAscom: Validating file name...
[02/27/19 21:11:50.116][DEBUG] [Sequence Thread] SaveFileAscom: Starting byte traversal...
[02/27/19 21:11:50.291][DEBUG] [Sequence Thread] SaveFileAscom: Unlocking preview bits...
[02/27/19 21:11:50.291][DEBUG] [Sequence Thread] SaveFileAscom: Saving preview bitmap to disk...
[02/27/19 21:11:50.291][DEBUG] [Sequence Thread] SaveFileBmp16: Locking bitmap for disk write...
[02/27/19 21:11:50.291][DEBUG] [Sequence Thread] SaveFileBmp16: Opening file stream...
[02/27/19 21:11:50.291][DEBUG] [Sequence Thread] SaveFileBmp16: Writing FITS headers...
[02/27/19 21:11:50.291][DEBUG] [Sequence Thread] SaveFileBmp16: Traversing and persisting bitmap data...
[02/27/19 21:11:50.453][DEBUG] [Sequence Thread] SaveFileBmp16: FITS block fill...
[02/27/19 21:11:50.453][DEBUG] [Sequence Thread] SaveFileBmp16: Unlocking bitmap...
[02/27/19 21:11:50.453][DEBUG] [Sequence Thread] SaveFileBmp16: Closing file stream
[02/27/19 21:11:50.454][DEBUG] [Sequence Thread] SaveFileAscom: Displaying image preview in UI...
[02/27/19 21:11:50.454][DEBUG] [Sequence Thread] Internal Interface: Set Preview...
[02/27/19 21:11:50.454][DEBUG] [Sequence Thread] Display image preview using asynch task...
[02/27/19 21:11:51.263][DEBUG] [Sequence Thread] SaveFileAscom: Done
[02/27/19 21:11:51.263][DEBUG] [Sequence Thread] =========== Save file took 1155 ms
[02/27/19 21:11:51.263][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_211117_frame16_-15C.fit" saved.  HFR = 2.72.
[02/27/19 21:11:51.263][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_211117_frame16_-15C.fit" saved.  HFR = 2.72.)...
[02/27/19 21:11:51.268][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:11:51.268][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:0; f:15; o:
[02/27/19 21:11:51.268][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:11:51.268][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:11:51.268][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:11:51.368][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:11:51.368][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:11:51.368][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:0; f:15; o:
[02/27/19 21:11:51.369][DEBUG] [Sequence Thread] EventMarker 18 - t:m81 (1); e:0; f:15; o:
[02/27/19 21:11:51.374][DEBUG] [Sequence Thread] EventMarker 19 - t:m81 (1); e:0; f:16; o:
[02/27/19 21:11:51.374][DEBUG] [Sequence Thread] EventMarker 20 - t:m81 (1); e:0; f:16; o:
[02/27/19 21:11:51.374][DEBUG] [Sequence Thread] Running post event...
[02/27/19 21:11:51.374][DEBUG] [Sequence Thread] EventMarker 21 - t:m81 (1); e:0; f:16; o:
[02/27/19 21:11:51.377][DEBUG] [Sequence Thread] Incremented numComplete (16) for event[0]...
[02/27/19 21:11:51.379][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:11:51.379][DEBUG] [Sequence Thread] Current event[0] frame count: 16/120...
[02/27/19 21:11:51.379][DEBUG] [Sequence Thread] Current event event[0] has remaining frames.  Returning current event.
[02/27/19 21:11:51.379][DEBUG] [Sequence Thread] Checking for auto manual focus (post)...
[02/27/19 21:11:51.385][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:11:51.398][DEBUG] [Sequence Thread] Attempting to move to next event...
[02/27/19 21:11:51.398][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:11:51.398][DEBUG] [Sequence Thread] Current event[0] frame count: 16/120...
[02/27/19 21:11:51.398][DEBUG] [Sequence Thread] Current event event[0] has remaining frames.  Returning current event.
[02/27/19 21:11:51.398][DEBUG] [Sequence Thread] Running pre event...
[02/27/19 21:11:51.412][DEBUG] [Sequence Thread] Current target has end time at 28/02/2019 06:30:00
[02/27/19 21:11:51.412][DEBUG] [Sequence Thread] End time of next frame is at 27/02/2019 21:12:21
[02/27/19 21:11:51.412][DEBUG] [Sequence Thread] Target is still before end time, continuing...
[02/27/19 21:11:51.412][DEBUG] [Sequence Thread] Running capture event...
[02/27/19 21:11:51.413][DEBUG] [Sequence Thread] ------------- Starting capture frame for event[0] -------------
[02/27/19 21:11:51.418][DEBUG] [Sequence Thread] Sending commands...
[02/27/19 21:11:51.418][DEBUG] [Sequence Thread] SetFlatBox: Frame Type is Light
[02/27/19 21:11:51.418][DEBUG] [Sequence Thread] EventMarker 2 - t:m81 (1); e:0; f:16; o:
[02/27/19 21:11:51.418][DEBUG] [Sequence Thread] Checking if Meridian Flip is needed
[02/27/19 21:11:51.418][DEBUG] [Sequence Thread] Telescope is on the West side of the mount
[02/27/19 21:11:51.418][DEBUG] [Sequence Thread] Meridian Flip not needed, Hour Angle < Degrees Past To Flip: -38.3915278321218 < 0
[02/27/19 21:11:51.418][DEBUG] [Sequence Thread] EventMarker 3 - t:m81 (1); e:0; f:16; o:
[02/27/19 21:11:51.418][DEBUG] [Sequence Thread] EventMarker 4 - t:m81 (1); e:0; f:16; o:
[02/27/19 21:11:51.418][DEBUG] [Sequence Thread] Setting filter position 1...
[02/27/19 21:11:51.418][DEBUG] [Sequence Thread] Filter position 1 is already set.  Skipping...
[02/27/19 21:11:51.418][DEBUG] [Sequence Thread] EventMarker 5 - t:m81 (1); e:0; f:16; o:
[02/27/19 21:11:51.418][DEBUG] [Sequence Thread] Checking for auto manual focus (pre)...
[02/27/19 21:11:51.418][DEBUG] [Sequence Thread] EventMarker 6 - t:m81 (1); e:0; f:16; o:
[02/27/19 21:11:51.428][DEBUG] [Sequence Thread] Autoguider will not dither this frame. Total frames is not a modulus of 5
[02/27/19 21:11:51.429][DEBUG] [Sequence Thread] EventMarker 1 - t:m81 (1); e:0; f:16; o:
[02/27/19 21:11:51.429][DEBUG] [Sequence Thread] Created base name for frame capture: m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_211151_frame17_-15C
[02/27/19 21:11:51.429][DEBUG] [Sequence Thread] Created directory for frame capture: C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\
[02/27/19 21:11:51.430][DEBUG] [Sequence Thread] EventMarker 7 - t:m81 (1); e:0; f:16; o:
[02/27/19 21:11:51.430][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:11:51.430][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:0; f:16; o:
[02/27/19 21:11:51.430][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:11:51.430][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:11:51.430][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:11:51.530][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:11:51.530][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:11:51.530][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:0; f:16; o:
[02/27/19 21:11:51.531][DEBUG] [Sequence Thread] {"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}
[02/27/19 21:11:51.531][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}

[02/27/19 21:11:51.531][DEBUG] [Sequence Thread] EventMarker 172 - t:m81 (1); e:0; f:16; o:
[02/27/19 21:11:51.531][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:11:51.531][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:11:51.531][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:11:51.592][DEBUG] [PHD2 Listener Thread] Unknown object from PHD2: {"Event":"SettleBegin","Timestamp":1551301911.541,"Host":"JGL2_2","Inst":1}
[02/27/19 21:11:51.632][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:11:51.632][DEBUG] [Sequence Thread] EventMarker 173 - t:m81 (1); e:0; f:16; o:
[02/27/19 21:11:51.632][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Attempting to settle the auto guider...
[02/27/19 21:11:51.632][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Attempting to settle the auto guider...)...
[02/27/19 21:11:51.632][DEBUG] [Sequence Thread] Waiting for Auto Guider distance to fall below 0.5
[02/27/19 21:11:51.632][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:11:51.632][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:11:51.639][DEBUG] [Sequence Thread] Distance is below 0.5, starting timer...
[02/27/19 21:11:52.140][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:11:52.140][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:11:52.146][DEBUG] [Sequence Thread] Distance stayed below 0.5 for 0 seconds, done settling...
[02/27/19 21:11:52.146][DEBUG] [Sequence Thread] SGPro settle criteria have been met, but the guider reports it is not ready to resume, waiting...
[02/27/19 21:11:52.248][DEBUG] [PHD2 Listener Thread] PHD2: Settle done received: GOOD
[02/27/19 21:11:52.654][DEBUG] [Sequence Thread] Auto guider has settled...
[02/27/19 21:11:52.654][DEBUG] [Sequence Thread] EventMarker 8 - t:m81 (1); e:0; f:16; o:
[02/27/19 21:11:52.654][DEBUG] [Sequence Thread] EventMarker 9 - t:m81 (1); e:0; f:16; o:
[02/27/19 21:11:52.654][DEBUG] [Sequence Thread] EventMarker 10 - t:m81 (1); e:0; f:16; o:
[02/27/19 21:11:52.654][DEBUG] [Sequence Thread] Finished sending frame capture.  Entering wait mode...
[02/27/19 21:11:52.654][DEBUG] [Sequence Thread] EventMarker 11 - t:m81 (1); e:0; f:16; o:
[02/27/19 21:11:52.654][DEBUG] [Sequence Thread] EventMarker 12 - t:m81 (1); e:0; f:16; o:
[02/27/19 21:11:52.657][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE message received...
[02/27/19 21:11:52.658][DEBUG] [Camera Thread] SetAscomGain to 76
[02/27/19 21:11:52.659][DEBUG] [Camera Thread] Camera gain set to 76
[02/27/19 21:11:52.659][DEBUG] [Camera Thread] SetAscomNormalSpeed... 
[02/27/19 21:11:52.659][DEBUG] [Camera Thread] Cannot set readout speed, not supported by camera...
[02/27/19 21:11:52.659][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Starting integration of m81; Event 1; Frame 17 for 30s...
[02/27/19 21:11:52.659][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Starting integration of m81; Event 1; Frame 17 for 30s...)...
[02/27/19 21:11:52.660][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, TimedError): (2019-02-25) Failure while integrating m81; Event 1; Frame 17 for 30s. Image has not downloaded in alloted time period.
[02/27/19 21:11:52.660][DEBUG] [Sequence Thread] GNS: Sent timed event to GNS...
[02/27/19 21:11:52.662][DEBUG] [Sequence Thread] EventMarker 13 - t:m81 (1); e:0; f:16; o:
[02/27/19 21:11:54.204][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:11:54.216][DEBUG] [MF Update Thread] Performing serialize...
[02/27/19 21:12:22.843][DEBUG] [Sequence Thread] EventMarker 15 - t:m81 (1); e:0; f:16; o:
[02/27/19 21:12:22.846][DEBUG] [Sequence Thread] Waking from exposure time sleep period...
[02/27/19 21:12:22.846][DEBUG] [Sequence Thread] Checking to see if the CCD has a temp...
[02/27/19 21:12:22.846][DEBUG] [Sequence Thread] Saving the CCD temp...
[02/27/19 21:12:22.853][DEBUG] [Sequence Thread] Entering super dangerous loop to await image completion...
[02/27/19 21:12:22.855][DEBUG] [Sequence Thread] EventMarker 16 - t:m81 (1); e:0; f:16; o:
[02/27/19 21:12:23.801][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE complete...
[02/27/19 21:12:23.859][DEBUG] [Sequence Thread] EventMarker 17 - t:m81 (1); e:0; f:16; o:
[02/27/19 21:12:23.859][DEBUG] [Sequence Thread] Image reported as complete.  Continuing...
[02/27/19 21:12:23.859][DEBUG] [Sequence Thread] Collecting FITs headers...
[02/27/19 21:12:23.860][DEBUG] [Sequence Thread] ASCOM Camera: Could not get last exposure start time.  Reported as (unknown)
[02/27/19 21:12:23.860][DEBUG] [Sequence Thread] DATE-LOC time provided by SGPro (failed to retrieve valid entry from camera)...
[02/27/19 21:12:23.861][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info for last solve...
[02/27/19 21:12:23.861][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info from UI...
[02/27/19 21:12:23.861][DEBUG] [Sequence Thread] Clearing timed monitoring events...
[02/27/19 21:12:23.864][DEBUG] [Sequence Thread] Created full file name (file does not exist): C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_211151_frame17_-15C.fit
[02/27/19 21:12:23.864][DEBUG] [Sequence Thread] SaveFileAscom: Start...
[02/27/19 21:12:23.864][DEBUG] [Sequence Thread] SaveFileAscom: Checking image data...
[02/27/19 21:12:23.864][DEBUG] [Sequence Thread] SaveFileAscom: Create normal preview bitmap...
[02/27/19 21:12:23.870][DEBUG] [Sequence Thread] SaveFileAscom: Locking preview bits...
[02/27/19 21:12:23.870][DEBUG] [Sequence Thread] SaveFileAscom: Validating file name...
[02/27/19 21:12:23.870][DEBUG] [Sequence Thread] SaveFileAscom: Starting byte traversal...
[02/27/19 21:12:24.041][DEBUG] [Sequence Thread] SaveFileAscom: Unlocking preview bits...
[02/27/19 21:12:24.041][DEBUG] [Sequence Thread] SaveFileAscom: Saving preview bitmap to disk...
[02/27/19 21:12:24.041][DEBUG] [Sequence Thread] SaveFileBmp16: Locking bitmap for disk write...
[02/27/19 21:12:24.041][DEBUG] [Sequence Thread] SaveFileBmp16: Opening file stream...
[02/27/19 21:12:24.042][DEBUG] [Sequence Thread] SaveFileBmp16: Writing FITS headers...
[02/27/19 21:12:24.042][DEBUG] [Sequence Thread] SaveFileBmp16: Traversing and persisting bitmap data...
[02/27/19 21:12:24.217][DEBUG] [Sequence Thread] SaveFileBmp16: FITS block fill...
[02/27/19 21:12:24.217][DEBUG] [Sequence Thread] SaveFileBmp16: Unlocking bitmap...
[02/27/19 21:12:24.217][DEBUG] [Sequence Thread] SaveFileBmp16: Closing file stream
[02/27/19 21:12:24.217][DEBUG] [Sequence Thread] SaveFileAscom: Displaying image preview in UI...
[02/27/19 21:12:24.217][DEBUG] [Sequence Thread] Internal Interface: Set Preview...
[02/27/19 21:12:24.218][DEBUG] [Sequence Thread] Display image preview using asynch task...
[02/27/19 21:12:25.349][DEBUG] [Sequence Thread] SaveFileAscom: Done
[02/27/19 21:12:25.349][DEBUG] [Sequence Thread] =========== Save file took 1487 ms
[02/27/19 21:12:25.349][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_211151_frame17_-15C.fit" saved.  HFR = 2.72.
[02/27/19 21:12:25.349][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_211151_frame17_-15C.fit" saved.  HFR = 2.72.)...
[02/27/19 21:12:25.357][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:12:25.357][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:0; f:16; o:
[02/27/19 21:12:25.357][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:12:25.357][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:12:25.357][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:12:25.458][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:12:25.458][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:12:25.458][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:0; f:16; o:
[02/27/19 21:12:25.458][DEBUG] [Sequence Thread] EventMarker 18 - t:m81 (1); e:0; f:16; o:
[02/27/19 21:12:25.464][DEBUG] [Sequence Thread] EventMarker 19 - t:m81 (1); e:0; f:17; o:
[02/27/19 21:12:25.464][DEBUG] [Sequence Thread] EventMarker 20 - t:m81 (1); e:0; f:17; o:
[02/27/19 21:12:25.464][DEBUG] [Sequence Thread] Running post event...
[02/27/19 21:12:25.464][DEBUG] [Sequence Thread] EventMarker 21 - t:m81 (1); e:0; f:17; o:
[02/27/19 21:12:25.470][DEBUG] [Sequence Thread] Incremented numComplete (17) for event[0]...
[02/27/19 21:12:25.475][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:12:25.475][DEBUG] [Sequence Thread] Current event[0] frame count: 17/120...
[02/27/19 21:12:25.475][DEBUG] [Sequence Thread] Current event event[0] has remaining frames.  Returning current event.
[02/27/19 21:12:25.475][DEBUG] [Sequence Thread] Checking for auto manual focus (post)...
[02/27/19 21:12:25.483][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:12:25.506][DEBUG] [Sequence Thread] Attempting to move to next event...
[02/27/19 21:12:25.506][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:12:25.506][DEBUG] [Sequence Thread] Current event[0] frame count: 17/120...
[02/27/19 21:12:25.506][DEBUG] [Sequence Thread] Current event event[0] has remaining frames.  Returning current event.
[02/27/19 21:12:25.506][DEBUG] [Sequence Thread] Running pre event...
[02/27/19 21:12:25.520][DEBUG] [Sequence Thread] Current target has end time at 28/02/2019 06:30:00
[02/27/19 21:12:25.520][DEBUG] [Sequence Thread] End time of next frame is at 27/02/2019 21:12:55
[02/27/19 21:12:25.520][DEBUG] [Sequence Thread] Target is still before end time, continuing...
[02/27/19 21:12:25.520][DEBUG] [Sequence Thread] Running capture event...
[02/27/19 21:12:25.522][DEBUG] [Sequence Thread] ------------- Starting capture frame for event[0] -------------
[02/27/19 21:12:25.527][DEBUG] [Sequence Thread] Sending commands...
[02/27/19 21:12:25.528][DEBUG] [Sequence Thread] SetFlatBox: Frame Type is Light
[02/27/19 21:12:25.528][DEBUG] [Sequence Thread] EventMarker 2 - t:m81 (1); e:0; f:17; o:
[02/27/19 21:12:25.528][DEBUG] [Sequence Thread] Checking if Meridian Flip is needed
[02/27/19 21:12:25.528][DEBUG] [Sequence Thread] Telescope is on the West side of the mount
[02/27/19 21:12:25.528][DEBUG] [Sequence Thread] Meridian Flip not needed, Hour Angle < Degrees Past To Flip: -38.2507232212364 < 0
[02/27/19 21:12:25.528][DEBUG] [Sequence Thread] EventMarker 3 - t:m81 (1); e:0; f:17; o:
[02/27/19 21:12:25.528][DEBUG] [Sequence Thread] EventMarker 4 - t:m81 (1); e:0; f:17; o:
[02/27/19 21:12:25.528][DEBUG] [Sequence Thread] Setting filter position 1...
[02/27/19 21:12:25.528][DEBUG] [Sequence Thread] Filter position 1 is already set.  Skipping...
[02/27/19 21:12:25.528][DEBUG] [Sequence Thread] EventMarker 5 - t:m81 (1); e:0; f:17; o:
[02/27/19 21:12:25.528][DEBUG] [Sequence Thread] Checking for auto manual focus (pre)...
[02/27/19 21:12:25.528][DEBUG] [Sequence Thread] EventMarker 6 - t:m81 (1); e:0; f:17; o:
[02/27/19 21:12:25.536][DEBUG] [Sequence Thread] Autoguider will not dither this frame. Total frames is not a modulus of 5
[02/27/19 21:12:25.536][DEBUG] [Sequence Thread] EventMarker 1 - t:m81 (1); e:0; f:17; o:
[02/27/19 21:12:25.537][DEBUG] [Sequence Thread] Created base name for frame capture: m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_211225_frame18_-15C
[02/27/19 21:12:25.537][DEBUG] [Sequence Thread] Created directory for frame capture: C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\
[02/27/19 21:12:25.537][DEBUG] [Sequence Thread] EventMarker 7 - t:m81 (1); e:0; f:17; o:
[02/27/19 21:12:25.537][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:12:25.537][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:0; f:17; o:
[02/27/19 21:12:25.537][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:12:25.537][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:12:25.537][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:12:25.637][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:12:25.637][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:12:25.637][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:0; f:17; o:
[02/27/19 21:12:25.638][DEBUG] [Sequence Thread] {"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}
[02/27/19 21:12:25.638][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}

[02/27/19 21:12:25.638][DEBUG] [Sequence Thread] EventMarker 172 - t:m81 (1); e:0; f:17; o:
[02/27/19 21:12:25.638][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:12:25.638][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:12:25.638][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:12:25.737][DEBUG] [PHD2 Listener Thread] Unknown object from PHD2: {"Event":"SettleBegin","Timestamp":1551301945.687,"Host":"JGL2_2","Inst":1}
[02/27/19 21:12:25.738][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:12:25.738][DEBUG] [Sequence Thread] EventMarker 173 - t:m81 (1); e:0; f:17; o:
[02/27/19 21:12:25.738][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Attempting to settle the auto guider...
[02/27/19 21:12:25.738][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Attempting to settle the auto guider...)...
[02/27/19 21:12:25.738][DEBUG] [Sequence Thread] Waiting for Auto Guider distance to fall below 0.5
[02/27/19 21:12:25.739][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:12:25.739][DEBUG] [Sequence Thread] PHD2 distance request returned 0.2...
[02/27/19 21:12:25.745][DEBUG] [Sequence Thread] Distance is below 0.5, starting timer...
[02/27/19 21:12:26.241][DEBUG] [PHD2 Listener Thread] PHD2: Settle done received: GOOD
[02/27/19 21:12:26.246][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:12:26.246][DEBUG] [Sequence Thread] PHD2 distance request returned 0.2...
[02/27/19 21:12:26.267][DEBUG] [Sequence Thread] Distance stayed below 0.5 for 0 seconds, done settling...
[02/27/19 21:12:26.267][DEBUG] [Sequence Thread] Auto guider has settled...
[02/27/19 21:12:26.268][DEBUG] [Sequence Thread] EventMarker 8 - t:m81 (1); e:0; f:17; o:
[02/27/19 21:12:26.268][DEBUG] [Sequence Thread] EventMarker 9 - t:m81 (1); e:0; f:17; o:
[02/27/19 21:12:26.268][DEBUG] [Sequence Thread] EventMarker 10 - t:m81 (1); e:0; f:17; o:
[02/27/19 21:12:26.268][DEBUG] [Sequence Thread] Finished sending frame capture.  Entering wait mode...
[02/27/19 21:12:26.268][DEBUG] [Sequence Thread] EventMarker 11 - t:m81 (1); e:0; f:17; o:
[02/27/19 21:12:26.268][DEBUG] [Sequence Thread] EventMarker 12 - t:m81 (1); e:0; f:17; o:
[02/27/19 21:12:26.270][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE message received...
[02/27/19 21:12:26.271][DEBUG] [Camera Thread] SetAscomGain to 76
[02/27/19 21:12:26.272][DEBUG] [Camera Thread] Camera gain set to 76
[02/27/19 21:12:26.272][DEBUG] [Camera Thread] SetAscomNormalSpeed... 
[02/27/19 21:12:26.272][DEBUG] [Camera Thread] Cannot set readout speed, not supported by camera...
[02/27/19 21:12:26.278][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Starting integration of m81; Event 1; Frame 18 for 30s...
[02/27/19 21:12:26.278][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Starting integration of m81; Event 1; Frame 18 for 30s...)...
[02/27/19 21:12:26.279][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, TimedError): (2019-02-25) Failure while integrating m81; Event 1; Frame 18 for 30s. Image has not downloaded in alloted time period.
[02/27/19 21:12:26.279][DEBUG] [Sequence Thread] GNS: Sent timed event to GNS...
[02/27/19 21:12:26.279][DEBUG] [Sequence Thread] EventMarker 13 - t:m81 (1); e:0; f:17; o:
[02/27/19 21:12:56.351][DEBUG] [Sequence Thread] EventMarker 15 - t:m81 (1); e:0; f:17; o:
[02/27/19 21:12:56.355][DEBUG] [Sequence Thread] Waking from exposure time sleep period...
[02/27/19 21:12:56.355][DEBUG] [Sequence Thread] Checking to see if the CCD has a temp...
[02/27/19 21:12:56.355][DEBUG] [Sequence Thread] Saving the CCD temp...
[02/27/19 21:12:56.362][DEBUG] [Sequence Thread] Entering super dangerous loop to await image completion...
[02/27/19 21:12:56.364][DEBUG] [Sequence Thread] EventMarker 16 - t:m81 (1); e:0; f:17; o:
[02/27/19 21:12:57.423][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE complete...
[02/27/19 21:12:57.868][DEBUG] [Sequence Thread] EventMarker 17 - t:m81 (1); e:0; f:17; o:
[02/27/19 21:12:57.868][DEBUG] [Sequence Thread] Image reported as complete.  Continuing...
[02/27/19 21:12:57.868][DEBUG] [Sequence Thread] Collecting FITs headers...
[02/27/19 21:12:57.869][DEBUG] [Sequence Thread] ASCOM Camera: Could not get last exposure start time.  Reported as (unknown)
[02/27/19 21:12:57.869][DEBUG] [Sequence Thread] DATE-LOC time provided by SGPro (failed to retrieve valid entry from camera)...
[02/27/19 21:12:57.870][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info for last solve...
[02/27/19 21:12:57.870][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info from UI...
[02/27/19 21:12:57.870][DEBUG] [Sequence Thread] Clearing timed monitoring events...
[02/27/19 21:12:57.873][DEBUG] [Sequence Thread] Created full file name (file does not exist): C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_211225_frame18_-15C.fit
[02/27/19 21:12:57.873][DEBUG] [Sequence Thread] SaveFileAscom: Start...
[02/27/19 21:12:57.873][DEBUG] [Sequence Thread] SaveFileAscom: Checking image data...
[02/27/19 21:12:57.873][DEBUG] [Sequence Thread] SaveFileAscom: Create normal preview bitmap...
[02/27/19 21:12:57.879][DEBUG] [Sequence Thread] SaveFileAscom: Locking preview bits...
[02/27/19 21:12:57.879][DEBUG] [Sequence Thread] SaveFileAscom: Validating file name...
[02/27/19 21:12:57.879][DEBUG] [Sequence Thread] SaveFileAscom: Starting byte traversal...
[02/27/19 21:12:58.060][DEBUG] [Sequence Thread] SaveFileAscom: Unlocking preview bits...
[02/27/19 21:12:58.060][DEBUG] [Sequence Thread] SaveFileAscom: Saving preview bitmap to disk...
[02/27/19 21:12:58.060][DEBUG] [Sequence Thread] SaveFileBmp16: Locking bitmap for disk write...
[02/27/19 21:12:58.060][DEBUG] [Sequence Thread] SaveFileBmp16: Opening file stream...
[02/27/19 21:12:58.068][DEBUG] [Sequence Thread] SaveFileBmp16: Writing FITS headers...
[02/27/19 21:12:58.069][DEBUG] [Sequence Thread] SaveFileBmp16: Traversing and persisting bitmap data...
[02/27/19 21:12:58.250][DEBUG] [Sequence Thread] SaveFileBmp16: FITS block fill...
[02/27/19 21:12:58.251][DEBUG] [Sequence Thread] SaveFileBmp16: Unlocking bitmap...
[02/27/19 21:12:58.251][DEBUG] [Sequence Thread] SaveFileBmp16: Closing file stream
[02/27/19 21:12:58.251][DEBUG] [Sequence Thread] SaveFileAscom: Displaying image preview in UI...
[02/27/19 21:12:58.251][DEBUG] [Sequence Thread] Internal Interface: Set Preview...
[02/27/19 21:12:58.251][DEBUG] [Sequence Thread] Display image preview using asynch task...
[02/27/19 21:12:59.376][DEBUG] [Sequence Thread] SaveFileAscom: Done
[02/27/19 21:12:59.376][DEBUG] [Sequence Thread] =========== Save file took 1505 ms
[02/27/19 21:12:59.376][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_211225_frame18_-15C.fit" saved.  HFR = 2.72.
[02/27/19 21:12:59.376][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_211225_frame18_-15C.fit" saved.  HFR = 2.72.)...
[02/27/19 21:12:59.383][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:12:59.383][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:0; f:17; o:
[02/27/19 21:12:59.383][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:12:59.383][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:12:59.383][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:12:59.483][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:12:59.483][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:12:59.483][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:0; f:17; o:
[02/27/19 21:12:59.484][DEBUG] [Sequence Thread] EventMarker 18 - t:m81 (1); e:0; f:17; o:
[02/27/19 21:12:59.487][DEBUG] [Sequence Thread] EventMarker 19 - t:m81 (1); e:0; f:18; o:
[02/27/19 21:12:59.487][DEBUG] [Sequence Thread] EventMarker 20 - t:m81 (1); e:0; f:18; o:
[02/27/19 21:12:59.487][DEBUG] [Sequence Thread] Running post event...
[02/27/19 21:12:59.487][DEBUG] [Sequence Thread] EventMarker 21 - t:m81 (1); e:0; f:18; o:
[02/27/19 21:12:59.494][DEBUG] [Sequence Thread] Incremented numComplete (18) for event[0]...
[02/27/19 21:12:59.495][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:12:59.495][DEBUG] [Sequence Thread] Current event[0] frame count: 18/120...
[02/27/19 21:12:59.495][DEBUG] [Sequence Thread] Current event event[0] has remaining frames.  Returning current event.
[02/27/19 21:12:59.495][DEBUG] [Sequence Thread] Checking for auto manual focus (post)...
[02/27/19 21:12:59.496][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:12:59.508][DEBUG] [Sequence Thread] Attempting to move to next event...
[02/27/19 21:12:59.508][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:12:59.508][DEBUG] [Sequence Thread] Current event[0] frame count: 18/120...
[02/27/19 21:12:59.508][DEBUG] [Sequence Thread] Current event event[0] has remaining frames.  Returning current event.
[02/27/19 21:12:59.509][DEBUG] [Sequence Thread] Running pre event...
[02/27/19 21:12:59.530][DEBUG] [Sequence Thread] Current target has end time at 28/02/2019 06:30:00
[02/27/19 21:12:59.530][DEBUG] [Sequence Thread] End time of next frame is at 27/02/2019 21:13:29
[02/27/19 21:12:59.530][DEBUG] [Sequence Thread] Target is still before end time, continuing...
[02/27/19 21:12:59.530][DEBUG] [Sequence Thread] Running capture event...
[02/27/19 21:12:59.531][DEBUG] [Sequence Thread] ------------- Starting capture frame for event[0] -------------
[02/27/19 21:12:59.543][DEBUG] [Sequence Thread] Sending commands...
[02/27/19 21:12:59.543][DEBUG] [Sequence Thread] SetFlatBox: Frame Type is Light
[02/27/19 21:12:59.543][DEBUG] [Sequence Thread] EventMarker 2 - t:m81 (1); e:0; f:18; o:
[02/27/19 21:12:59.543][DEBUG] [Sequence Thread] Checking if Meridian Flip is needed
[02/27/19 21:12:59.543][DEBUG] [Sequence Thread] Telescope is on the West side of the mount
[02/27/19 21:12:59.543][DEBUG] [Sequence Thread] Meridian Flip not needed, Hour Angle < Degrees Past To Flip: -38.1087104455866 < 0
[02/27/19 21:12:59.543][DEBUG] [Sequence Thread] EventMarker 3 - t:m81 (1); e:0; f:18; o:
[02/27/19 21:12:59.543][DEBUG] [Sequence Thread] EventMarker 4 - t:m81 (1); e:0; f:18; o:
[02/27/19 21:12:59.543][DEBUG] [Sequence Thread] Setting filter position 1...
[02/27/19 21:12:59.543][DEBUG] [Sequence Thread] Filter position 1 is already set.  Skipping...
[02/27/19 21:12:59.543][DEBUG] [Sequence Thread] EventMarker 5 - t:m81 (1); e:0; f:18; o:
[02/27/19 21:12:59.543][DEBUG] [Sequence Thread] Checking for auto manual focus (pre)...
[02/27/19 21:12:59.543][DEBUG] [Sequence Thread] EventMarker 6 - t:m81 (1); e:0; f:18; o:
[02/27/19 21:12:59.551][DEBUG] [Sequence Thread] Autoguider will not dither this frame. Total frames is not a modulus of 5
[02/27/19 21:12:59.552][DEBUG] [Sequence Thread] EventMarker 1 - t:m81 (1); e:0; f:18; o:
[02/27/19 21:12:59.552][DEBUG] [Sequence Thread] Created base name for frame capture: m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_211259_frame19_-15C
[02/27/19 21:12:59.552][DEBUG] [Sequence Thread] Created directory for frame capture: C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\
[02/27/19 21:12:59.552][DEBUG] [Sequence Thread] EventMarker 7 - t:m81 (1); e:0; f:18; o:
[02/27/19 21:12:59.552][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:12:59.552][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:0; f:18; o:
[02/27/19 21:12:59.552][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:12:59.552][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:12:59.552][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:12:59.653][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:12:59.653][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:12:59.653][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:0; f:18; o:
[02/27/19 21:12:59.653][DEBUG] [Sequence Thread] {"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}
[02/27/19 21:12:59.653][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}

[02/27/19 21:12:59.653][DEBUG] [Sequence Thread] EventMarker 172 - t:m81 (1); e:0; f:18; o:
[02/27/19 21:12:59.653][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:12:59.653][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:12:59.653][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:12:59.715][DEBUG] [PHD2 Listener Thread] Unknown object from PHD2: {"Event":"SettleBegin","Timestamp":1551301979.666,"Host":"JGL2_2","Inst":1}
[02/27/19 21:12:59.754][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:12:59.754][DEBUG] [Sequence Thread] EventMarker 173 - t:m81 (1); e:0; f:18; o:
[02/27/19 21:12:59.754][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Attempting to settle the auto guider...
[02/27/19 21:12:59.754][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Attempting to settle the auto guider...)...
[02/27/19 21:12:59.754][DEBUG] [Sequence Thread] Waiting for Auto Guider distance to fall below 0.5
[02/27/19 21:12:59.754][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:12:59.754][DEBUG] [Sequence Thread] PHD2 distance request returned 0.2...
[02/27/19 21:12:59.766][DEBUG] [Sequence Thread] Distance is below 0.5, starting timer...
[02/27/19 21:13:00.266][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:13:00.266][DEBUG] [Sequence Thread] PHD2 distance request returned 0.2...
[02/27/19 21:13:00.271][DEBUG] [PHD2 Listener Thread] PHD2: Settle done received: GOOD
[02/27/19 21:13:00.685][DEBUG] [Sequence Thread] Distance stayed below 0.5 for 0 seconds, done settling...
[02/27/19 21:13:00.686][DEBUG] [Sequence Thread] Auto guider has settled...
[02/27/19 21:13:00.686][DEBUG] [Sequence Thread] EventMarker 8 - t:m81 (1); e:0; f:18; o:
[02/27/19 21:13:00.686][DEBUG] [Sequence Thread] EventMarker 9 - t:m81 (1); e:0; f:18; o:
[02/27/19 21:13:00.686][DEBUG] [Sequence Thread] EventMarker 10 - t:m81 (1); e:0; f:18; o:
[02/27/19 21:13:00.686][DEBUG] [Sequence Thread] Finished sending frame capture.  Entering wait mode...
[02/27/19 21:13:00.686][DEBUG] [Sequence Thread] EventMarker 11 - t:m81 (1); e:0; f:18; o:
[02/27/19 21:13:00.687][DEBUG] [Sequence Thread] EventMarker 12 - t:m81 (1); e:0; f:18; o:
[02/27/19 21:13:00.689][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE message received...
[02/27/19 21:13:00.690][DEBUG] [Camera Thread] SetAscomGain to 76
[02/27/19 21:13:00.690][DEBUG] [Camera Thread] Camera gain set to 76
[02/27/19 21:13:00.690][DEBUG] [Camera Thread] SetAscomNormalSpeed... 
[02/27/19 21:13:00.690][DEBUG] [Camera Thread] Cannot set readout speed, not supported by camera...
[02/27/19 21:13:00.703][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Starting integration of m81; Event 1; Frame 19 for 30s...
[02/27/19 21:13:00.703][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Starting integration of m81; Event 1; Frame 19 for 30s...)...
[02/27/19 21:13:00.704][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, TimedError): (2019-02-25) Failure while integrating m81; Event 1; Frame 19 for 30s. Image has not downloaded in alloted time period.
[02/27/19 21:13:00.704][DEBUG] [Sequence Thread] GNS: Sent timed event to GNS...
[02/27/19 21:13:00.708][DEBUG] [Sequence Thread] EventMarker 13 - t:m81 (1); e:0; f:18; o:
[02/27/19 21:13:18.261][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:13:18.275][DEBUG] [MF Update Thread] Performing serialize...
[02/27/19 21:13:30.820][DEBUG] [Sequence Thread] EventMarker 15 - t:m81 (1); e:0; f:18; o:
[02/27/19 21:13:30.824][DEBUG] [Sequence Thread] Waking from exposure time sleep period...
[02/27/19 21:13:30.824][DEBUG] [Sequence Thread] Checking to see if the CCD has a temp...
[02/27/19 21:13:30.824][DEBUG] [Sequence Thread] Saving the CCD temp...
[02/27/19 21:13:30.829][DEBUG] [Sequence Thread] Entering super dangerous loop to await image completion...
[02/27/19 21:13:30.830][DEBUG] [Sequence Thread] EventMarker 16 - t:m81 (1); e:0; f:18; o:
[02/27/19 21:13:31.816][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE complete...
[02/27/19 21:13:31.834][DEBUG] [Sequence Thread] EventMarker 17 - t:m81 (1); e:0; f:18; o:
[02/27/19 21:13:31.834][DEBUG] [Sequence Thread] Image reported as complete.  Continuing...
[02/27/19 21:13:31.834][DEBUG] [Sequence Thread] Collecting FITs headers...
[02/27/19 21:13:31.835][DEBUG] [Sequence Thread] ASCOM Camera: Could not get last exposure start time.  Reported as (unknown)
[02/27/19 21:13:31.835][DEBUG] [Sequence Thread] DATE-LOC time provided by SGPro (failed to retrieve valid entry from camera)...
[02/27/19 21:13:32.187][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info for last solve...
[02/27/19 21:13:32.187][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info from UI...
[02/27/19 21:13:32.195][DEBUG] [Sequence Thread] Clearing timed monitoring events...
[02/27/19 21:13:32.199][DEBUG] [Sequence Thread] Created full file name (file does not exist): C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_211259_frame19_-15C.fit
[02/27/19 21:13:32.199][DEBUG] [Sequence Thread] SaveFileAscom: Start...
[02/27/19 21:13:32.200][DEBUG] [Sequence Thread] SaveFileAscom: Checking image data...
[02/27/19 21:13:32.200][DEBUG] [Sequence Thread] SaveFileAscom: Create normal preview bitmap...
[02/27/19 21:13:32.208][DEBUG] [Sequence Thread] SaveFileAscom: Locking preview bits...
[02/27/19 21:13:32.208][DEBUG] [Sequence Thread] SaveFileAscom: Validating file name...
[02/27/19 21:13:32.208][DEBUG] [Sequence Thread] SaveFileAscom: Starting byte traversal...
[02/27/19 21:13:32.385][DEBUG] [Sequence Thread] SaveFileAscom: Unlocking preview bits...
[02/27/19 21:13:32.385][DEBUG] [Sequence Thread] SaveFileAscom: Saving preview bitmap to disk...
[02/27/19 21:13:32.385][DEBUG] [Sequence Thread] SaveFileBmp16: Locking bitmap for disk write...
[02/27/19 21:13:32.385][DEBUG] [Sequence Thread] SaveFileBmp16: Opening file stream...
[02/27/19 21:13:32.386][DEBUG] [Sequence Thread] SaveFileBmp16: Writing FITS headers...
[02/27/19 21:13:32.386][DEBUG] [Sequence Thread] SaveFileBmp16: Traversing and persisting bitmap data...
[02/27/19 21:13:32.542][DEBUG] [Sequence Thread] SaveFileBmp16: FITS block fill...
[02/27/19 21:13:32.542][DEBUG] [Sequence Thread] SaveFileBmp16: Unlocking bitmap...
[02/27/19 21:13:32.542][DEBUG] [Sequence Thread] SaveFileBmp16: Closing file stream
[02/27/19 21:13:32.546][DEBUG] [Sequence Thread] SaveFileAscom: Displaying image preview in UI...
[02/27/19 21:13:32.546][DEBUG] [Sequence Thread] Internal Interface: Set Preview...
[02/27/19 21:13:32.546][DEBUG] [Sequence Thread] Display image preview using asynch task...
[02/27/19 21:13:33.667][DEBUG] [Sequence Thread] SaveFileAscom: Done
[02/27/19 21:13:33.667][DEBUG] [Sequence Thread] =========== Save file took 1471 ms
[02/27/19 21:13:33.667][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_211259_frame19_-15C.fit" saved.  HFR = 2.72.
[02/27/19 21:13:33.667][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_211259_frame19_-15C.fit" saved.  HFR = 2.72.)...
[02/27/19 21:13:33.671][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:13:33.671][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:0; f:18; o:
[02/27/19 21:13:33.671][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:13:33.671][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:13:33.671][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:13:33.772][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:13:33.772][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:13:33.772][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:0; f:18; o:
[02/27/19 21:13:33.772][DEBUG] [Sequence Thread] EventMarker 18 - t:m81 (1); e:0; f:18; o:
[02/27/19 21:13:33.785][DEBUG] [Sequence Thread] EventMarker 19 - t:m81 (1); e:0; f:19; o:
[02/27/19 21:13:33.785][DEBUG] [Sequence Thread] EventMarker 20 - t:m81 (1); e:0; f:19; o:
[02/27/19 21:13:33.785][DEBUG] [Sequence Thread] Running post event...
[02/27/19 21:13:33.785][DEBUG] [Sequence Thread] EventMarker 21 - t:m81 (1); e:0; f:19; o:
[02/27/19 21:13:33.793][DEBUG] [Sequence Thread] Incremented numComplete (19) for event[0]...
[02/27/19 21:13:33.797][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:13:33.797][DEBUG] [Sequence Thread] Current event[0] frame count: 19/120...
[02/27/19 21:13:33.797][DEBUG] [Sequence Thread] Current event event[0] has remaining frames.  Returning current event.
[02/27/19 21:13:33.797][DEBUG] [Sequence Thread] Checking for auto manual focus (post)...
[02/27/19 21:13:33.797][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:13:33.816][DEBUG] [Sequence Thread] Attempting to move to next event...
[02/27/19 21:13:33.816][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:13:33.816][DEBUG] [Sequence Thread] Current event[0] frame count: 19/120...
[02/27/19 21:13:33.816][DEBUG] [Sequence Thread] Current event event[0] has remaining frames.  Returning current event.
[02/27/19 21:13:33.816][DEBUG] [Sequence Thread] Running pre event...
[02/27/19 21:13:33.838][DEBUG] [Sequence Thread] Current target has end time at 28/02/2019 06:30:00
[02/27/19 21:13:33.838][DEBUG] [Sequence Thread] End time of next frame is at 27/02/2019 21:14:03
[02/27/19 21:13:33.838][DEBUG] [Sequence Thread] Target is still before end time, continuing...
[02/27/19 21:13:33.838][DEBUG] [Sequence Thread] Running capture event...
[02/27/19 21:13:33.839][DEBUG] [Sequence Thread] ------------- Starting capture frame for event[0] -------------
[02/27/19 21:13:33.847][DEBUG] [Sequence Thread] Sending commands...
[02/27/19 21:13:33.847][DEBUG] [Sequence Thread] SetFlatBox: Frame Type is Light
[02/27/19 21:13:33.847][DEBUG] [Sequence Thread] EventMarker 2 - t:m81 (1); e:0; f:19; o:
[02/27/19 21:13:33.847][DEBUG] [Sequence Thread] Checking if Meridian Flip is needed
[02/27/19 21:13:33.848][DEBUG] [Sequence Thread] Telescope is on the West side of the mount
[02/27/19 21:13:33.848][DEBUG] [Sequence Thread] Meridian Flip not needed, Hour Angle < Degrees Past To Flip: -37.9631027828641 < 0
[02/27/19 21:13:33.848][DEBUG] [Sequence Thread] EventMarker 3 - t:m81 (1); e:0; f:19; o:
[02/27/19 21:13:33.848][DEBUG] [Sequence Thread] EventMarker 4 - t:m81 (1); e:0; f:19; o:
[02/27/19 21:13:33.848][DEBUG] [Sequence Thread] Setting filter position 1...
[02/27/19 21:13:33.848][DEBUG] [Sequence Thread] Filter position 1 is already set.  Skipping...
[02/27/19 21:13:33.848][DEBUG] [Sequence Thread] EventMarker 5 - t:m81 (1); e:0; f:19; o:
[02/27/19 21:13:33.848][DEBUG] [Sequence Thread] Checking for auto manual focus (pre)...
[02/27/19 21:13:33.848][DEBUG] [Sequence Thread] EventMarker 6 - t:m81 (1); e:0; f:19; o:
[02/27/19 21:13:33.855][DEBUG] [Sequence Thread] Running dither...
[02/27/19 21:13:33.863][DEBUG] [Sequence Thread] PHD2 dither request: 1...
[02/27/19 21:13:33.863][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:13:33.864][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:13:33.864][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:13:33.964][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:13:34.964][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:13:34.964][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:13:34.964][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:13:35.064][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:13:36.065][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:13:36.065][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:13:36.065][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:13:36.166][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:13:37.167][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:13:37.167][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:13:37.167][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:13:37.267][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:13:38.268][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:13:38.268][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:13:38.268][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:13:38.368][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:13:38.368][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:13:38.368][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:13:38.368][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:13:38.469][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:13:38.469][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "dither", "params": [1, false, {"pixels": 0.5, "time": 0, "timeout": 600}], "id": 1002}

[02/27/19 21:13:38.471][DEBUG] [Sequence Thread] EventMarker 1 - t:m81 (1); e:0; f:19; o:
[02/27/19 21:13:38.474][DEBUG] [Sequence Thread] Created base name for frame capture: m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_211338_frame20_-15C
[02/27/19 21:13:38.474][DEBUG] [Sequence Thread] Created directory for frame capture: C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\
[02/27/19 21:13:38.474][DEBUG] [Sequence Thread] EventMarker 7 - t:m81 (1); e:0; f:19; o:
[02/27/19 21:13:38.474][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:13:38.474][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:0; f:19; o:
[02/27/19 21:13:38.474][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:13:38.474][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:13:38.474][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:13:38.563][DEBUG] [PHD2 Listener Thread] Unknown object from PHD2: {"Event":"SettleBegin","Timestamp":1551302018.516,"Host":"JGL2_2","Inst":1}
[02/27/19 21:13:38.575][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:13:38.575][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:13:38.575][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:0; f:19; o:
[02/27/19 21:13:38.576][DEBUG] [Sequence Thread] {"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}
[02/27/19 21:13:38.576][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}

[02/27/19 21:13:38.576][DEBUG] [Sequence Thread] EventMarker 172 - t:m81 (1); e:0; f:19; o:
[02/27/19 21:13:38.576][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:13:38.576][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:13:38.576][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:13:38.664][DEBUG] [PHD2 Listener Thread] Error received from RPC: Cannot initiate guide while dither is in progress
[02/27/19 21:13:38.677][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:13:38.677][DEBUG] [Sequence Thread] EventMarker 173 - t:m81 (1); e:0; f:19; o:
[02/27/19 21:13:38.677][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Attempting to settle the auto guider...
[02/27/19 21:13:38.677][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Attempting to settle the auto guider...)...
[02/27/19 21:13:38.677][DEBUG] [Sequence Thread] Waiting for Auto Guider distance to fall below 0.5
[02/27/19 21:13:38.677][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:13:38.677][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:13:38.688][DEBUG] [Sequence Thread] Distance is below 0.5, starting timer...
[02/27/19 21:13:39.189][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:13:39.189][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:13:39.201][DEBUG] [Sequence Thread] Distance stayed below 0.5 for 0 seconds, done settling...
[02/27/19 21:13:39.201][DEBUG] [Sequence Thread] SGPro settle criteria have been met, but the guider reports it is not ready to resume, waiting...
[02/27/19 21:13:44.266][DEBUG] [PHD2 Listener Thread] PHD2: Settle done received: GOOD
[02/27/19 21:13:44.733][DEBUG] [Sequence Thread] Auto guider has settled...
[02/27/19 21:13:44.733][DEBUG] [Sequence Thread] EventMarker 8 - t:m81 (1); e:0; f:19; o:
[02/27/19 21:13:44.733][DEBUG] [Sequence Thread] EventMarker 9 - t:m81 (1); e:0; f:19; o:
[02/27/19 21:13:44.733][DEBUG] [Sequence Thread] EventMarker 10 - t:m81 (1); e:0; f:19; o:
[02/27/19 21:13:44.733][DEBUG] [Sequence Thread] Finished sending frame capture.  Entering wait mode...
[02/27/19 21:13:44.733][DEBUG] [Sequence Thread] EventMarker 11 - t:m81 (1); e:0; f:19; o:
[02/27/19 21:13:44.735][DEBUG] [Sequence Thread] EventMarker 12 - t:m81 (1); e:0; f:19; o:
[02/27/19 21:13:44.738][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Starting integration of m81; Event 1; Frame 20 for 30s...
[02/27/19 21:13:44.739][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Starting integration of m81; Event 1; Frame 20 for 30s...)...
[02/27/19 21:13:44.739][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, TimedError): (2019-02-25) Failure while integrating m81; Event 1; Frame 20 for 30s. Image has not downloaded in alloted time period.
[02/27/19 21:13:44.739][DEBUG] [Sequence Thread] GNS: Sent timed event to GNS...
[02/27/19 21:13:44.742][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE message received...
[02/27/19 21:13:44.742][DEBUG] [Sequence Thread] EventMarker 13 - t:m81 (1); e:0; f:19; o:
[02/27/19 21:13:44.743][DEBUG] [Camera Thread] SetAscomGain to 76
[02/27/19 21:13:44.744][DEBUG] [Camera Thread] Camera gain set to 76
[02/27/19 21:13:44.744][DEBUG] [Camera Thread] SetAscomNormalSpeed... 
[02/27/19 21:13:44.744][DEBUG] [Camera Thread] Cannot set readout speed, not supported by camera...
[02/27/19 21:14:14.908][DEBUG] [Sequence Thread] EventMarker 15 - t:m81 (1); e:0; f:19; o:
[02/27/19 21:14:14.912][DEBUG] [Sequence Thread] Waking from exposure time sleep period...
[02/27/19 21:14:14.912][DEBUG] [Sequence Thread] Checking to see if the CCD has a temp...
[02/27/19 21:14:14.912][DEBUG] [Sequence Thread] Saving the CCD temp...
[02/27/19 21:14:14.918][DEBUG] [Sequence Thread] Entering super dangerous loop to await image completion...
[02/27/19 21:14:14.921][DEBUG] [Sequence Thread] EventMarker 16 - t:m81 (1); e:0; f:19; o:
[02/27/19 21:14:15.899][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE complete...
[02/27/19 21:14:15.924][DEBUG] [Sequence Thread] EventMarker 17 - t:m81 (1); e:0; f:19; o:
[02/27/19 21:14:15.924][DEBUG] [Sequence Thread] Image reported as complete.  Continuing...
[02/27/19 21:14:15.925][DEBUG] [Sequence Thread] Collecting FITs headers...
[02/27/19 21:14:15.925][DEBUG] [Sequence Thread] ASCOM Camera: Could not get last exposure start time.  Reported as (unknown)
[02/27/19 21:14:15.925][DEBUG] [Sequence Thread] DATE-LOC time provided by SGPro (failed to retrieve valid entry from camera)...
[02/27/19 21:14:15.926][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info for last solve...
[02/27/19 21:14:15.926][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info from UI...
[02/27/19 21:14:15.926][DEBUG] [Sequence Thread] Clearing timed monitoring events...
[02/27/19 21:14:15.929][DEBUG] [Sequence Thread] Created full file name (file does not exist): C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_211338_frame20_-15C.fit
[02/27/19 21:14:15.929][DEBUG] [Sequence Thread] SaveFileAscom: Start...
[02/27/19 21:14:15.929][DEBUG] [Sequence Thread] SaveFileAscom: Checking image data...
[02/27/19 21:14:15.929][DEBUG] [Sequence Thread] SaveFileAscom: Create normal preview bitmap...
[02/27/19 21:14:15.935][DEBUG] [Sequence Thread] SaveFileAscom: Locking preview bits...
[02/27/19 21:14:15.935][DEBUG] [Sequence Thread] SaveFileAscom: Validating file name...
[02/27/19 21:14:15.935][DEBUG] [Sequence Thread] SaveFileAscom: Starting byte traversal...
[02/27/19 21:14:16.115][DEBUG] [Sequence Thread] SaveFileAscom: Unlocking preview bits...
[02/27/19 21:14:16.115][DEBUG] [Sequence Thread] SaveFileAscom: Saving preview bitmap to disk...
[02/27/19 21:14:16.115][DEBUG] [Sequence Thread] SaveFileBmp16: Locking bitmap for disk write...
[02/27/19 21:14:16.115][DEBUG] [Sequence Thread] SaveFileBmp16: Opening file stream...
[02/27/19 21:14:16.115][DEBUG] [Sequence Thread] SaveFileBmp16: Writing FITS headers...
[02/27/19 21:14:16.116][DEBUG] [Sequence Thread] SaveFileBmp16: Traversing and persisting bitmap data...
[02/27/19 21:14:16.288][DEBUG] [Sequence Thread] SaveFileBmp16: FITS block fill...
[02/27/19 21:14:16.288][DEBUG] [Sequence Thread] SaveFileBmp16: Unlocking bitmap...
[02/27/19 21:14:16.288][DEBUG] [Sequence Thread] SaveFileBmp16: Closing file stream
[02/27/19 21:14:16.292][DEBUG] [Sequence Thread] SaveFileAscom: Displaying image preview in UI...
[02/27/19 21:14:16.292][DEBUG] [Sequence Thread] Internal Interface: Set Preview...
[02/27/19 21:14:16.292][DEBUG] [Sequence Thread] Display image preview using asynch task...
[02/27/19 21:14:17.172][DEBUG] [Sequence Thread] SaveFileAscom: Done
[02/27/19 21:14:17.172][DEBUG] [Sequence Thread] =========== Save file took 1245 ms
[02/27/19 21:14:17.172][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_211338_frame20_-15C.fit" saved.  HFR = 2.72.
[02/27/19 21:14:17.172][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_211338_frame20_-15C.fit" saved.  HFR = 2.72.)...
[02/27/19 21:14:17.183][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:14:17.183][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:0; f:19; o:
[02/27/19 21:14:17.183][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:14:17.184][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:14:17.184][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:14:17.284][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:14:17.284][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:14:17.284][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:0; f:19; o:
[02/27/19 21:14:17.285][DEBUG] [Sequence Thread] EventMarker 18 - t:m81 (1); e:0; f:19; o:
[02/27/19 21:14:17.290][DEBUG] [Sequence Thread] EventMarker 19 - t:m81 (1); e:0; f:20; o:
[02/27/19 21:14:17.291][DEBUG] [Sequence Thread] EventMarker 20 - t:m81 (1); e:0; f:20; o:
[02/27/19 21:14:17.291][DEBUG] [Sequence Thread] Running post event...
[02/27/19 21:14:17.291][DEBUG] [Sequence Thread] EventMarker 21 - t:m81 (1); e:0; f:20; o:
[02/27/19 21:14:17.293][DEBUG] [Sequence Thread] Incremented numComplete (20) for event[0]...
[02/27/19 21:14:17.299][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:14:17.299][DEBUG] [Sequence Thread] Current event[0] frame count: 20/120...
[02/27/19 21:14:17.299][DEBUG] [Sequence Thread] Current event event[0] has remaining frames.  Returning current event.
[02/27/19 21:14:17.299][DEBUG] [Sequence Thread] Checking for auto manual focus (post)...
[02/27/19 21:14:17.299][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:14:17.311][DEBUG] [Sequence Thread] Attempting to move to next event...
[02/27/19 21:14:17.311][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:14:17.311][DEBUG] [Sequence Thread] Current event[0] frame count: 20/120...
[02/27/19 21:14:17.311][DEBUG] [Sequence Thread] Current event event[0] has remaining frames.  Returning current event.
[02/27/19 21:14:17.311][DEBUG] [Sequence Thread] Running pre event...
[02/27/19 21:14:17.328][DEBUG] [Sequence Thread] Current target has end time at 28/02/2019 06:30:00
[02/27/19 21:14:17.328][DEBUG] [Sequence Thread] End time of next frame is at 27/02/2019 21:14:47
[02/27/19 21:14:17.328][DEBUG] [Sequence Thread] Target is still before end time, continuing...
[02/27/19 21:14:17.328][DEBUG] [Sequence Thread] Running capture event...
[02/27/19 21:14:17.329][DEBUG] [Sequence Thread] ------------- Starting capture frame for event[0] -------------
[02/27/19 21:14:17.335][DEBUG] [Sequence Thread] Sending commands...
[02/27/19 21:14:17.335][DEBUG] [Sequence Thread] SetFlatBox: Frame Type is Light
[02/27/19 21:14:17.335][DEBUG] [Sequence Thread] EventMarker 2 - t:m81 (1); e:0; f:20; o:
[02/27/19 21:14:17.335][DEBUG] [Sequence Thread] Checking if Meridian Flip is needed
[02/27/19 21:14:17.335][DEBUG] [Sequence Thread] Telescope is on the West side of the mount
[02/27/19 21:14:17.335][DEBUG] [Sequence Thread] Meridian Flip not needed, Hour Angle < Degrees Past To Flip: -37.7798205350153 < 0
[02/27/19 21:14:17.335][DEBUG] [Sequence Thread] EventMarker 3 - t:m81 (1); e:0; f:20; o:
[02/27/19 21:14:17.335][DEBUG] [Sequence Thread] EventMarker 4 - t:m81 (1); e:0; f:20; o:
[02/27/19 21:14:17.335][DEBUG] [Sequence Thread] Setting filter position 1...
[02/27/19 21:14:17.335][DEBUG] [Sequence Thread] Filter position 1 is already set.  Skipping...
[02/27/19 21:14:17.335][DEBUG] [Sequence Thread] EventMarker 5 - t:m81 (1); e:0; f:20; o:
[02/27/19 21:14:17.335][DEBUG] [Sequence Thread] Checking for auto manual focus (pre)...
[02/27/19 21:14:17.335][DEBUG] [Sequence Thread] EventMarker 6 - t:m81 (1); e:0; f:20; o:
[02/27/19 21:14:17.344][DEBUG] [Sequence Thread] Autoguider will not dither this frame. Total frames is not a modulus of 5
[02/27/19 21:14:17.344][DEBUG] [Sequence Thread] EventMarker 1 - t:m81 (1); e:0; f:20; o:
[02/27/19 21:14:17.345][DEBUG] [Sequence Thread] Created base name for frame capture: m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_211417_frame21_-15C
[02/27/19 21:14:17.345][DEBUG] [Sequence Thread] Created directory for frame capture: C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\
[02/27/19 21:14:17.345][DEBUG] [Sequence Thread] EventMarker 7 - t:m81 (1); e:0; f:20; o:
[02/27/19 21:14:17.345][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:14:17.345][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:0; f:20; o:
[02/27/19 21:14:17.345][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:14:17.345][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:14:17.345][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:14:17.446][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:14:17.446][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:14:17.446][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:0; f:20; o:
[02/27/19 21:14:17.446][DEBUG] [Sequence Thread] {"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}
[02/27/19 21:14:17.446][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}

[02/27/19 21:14:17.446][DEBUG] [Sequence Thread] EventMarker 172 - t:m81 (1); e:0; f:20; o:
[02/27/19 21:14:17.446][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:14:17.446][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:14:17.446][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:14:17.535][DEBUG] [PHD2 Listener Thread] Unknown object from PHD2: {"Event":"SettleBegin","Timestamp":1551302057.485,"Host":"JGL2_2","Inst":1}
[02/27/19 21:14:17.547][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:14:17.547][DEBUG] [Sequence Thread] EventMarker 173 - t:m81 (1); e:0; f:20; o:
[02/27/19 21:14:17.547][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Attempting to settle the auto guider...
[02/27/19 21:14:17.547][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Attempting to settle the auto guider...)...
[02/27/19 21:14:17.547][DEBUG] [Sequence Thread] Waiting for Auto Guider distance to fall below 0.5
[02/27/19 21:14:17.547][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:14:17.547][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:14:17.555][DEBUG] [Sequence Thread] Distance is below 0.5, starting timer...
[02/27/19 21:14:18.056][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:14:18.056][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:14:18.063][DEBUG] [Sequence Thread] Distance stayed below 0.5 for 0 seconds, done settling...
[02/27/19 21:14:18.063][DEBUG] [Sequence Thread] SGPro settle criteria have been met, but the guider reports it is not ready to resume, waiting...
[02/27/19 21:14:18.242][DEBUG] [PHD2 Listener Thread] PHD2: Settle done received: GOOD
[02/27/19 21:14:18.572][DEBUG] [Sequence Thread] Auto guider has settled...
[02/27/19 21:14:18.572][DEBUG] [Sequence Thread] EventMarker 8 - t:m81 (1); e:0; f:20; o:
[02/27/19 21:14:18.572][DEBUG] [Sequence Thread] EventMarker 9 - t:m81 (1); e:0; f:20; o:
[02/27/19 21:14:18.572][DEBUG] [Sequence Thread] EventMarker 10 - t:m81 (1); e:0; f:20; o:
[02/27/19 21:14:18.572][DEBUG] [Sequence Thread] Finished sending frame capture.  Entering wait mode...
[02/27/19 21:14:18.572][DEBUG] [Sequence Thread] EventMarker 11 - t:m81 (1); e:0; f:20; o:
[02/27/19 21:14:18.573][DEBUG] [Sequence Thread] EventMarker 12 - t:m81 (1); e:0; f:20; o:
[02/27/19 21:14:18.575][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE message received...
[02/27/19 21:14:18.576][DEBUG] [Camera Thread] SetAscomGain to 76
[02/27/19 21:14:18.577][DEBUG] [Camera Thread] Camera gain set to 76
[02/27/19 21:14:18.577][DEBUG] [Camera Thread] SetAscomNormalSpeed... 
[02/27/19 21:14:18.577][DEBUG] [Camera Thread] Cannot set readout speed, not supported by camera...
[02/27/19 21:14:18.579][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Starting integration of m81; Event 1; Frame 21 for 30s...
[02/27/19 21:14:18.579][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Starting integration of m81; Event 1; Frame 21 for 30s...)...
[02/27/19 21:14:18.580][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, TimedError): (2019-02-25) Failure while integrating m81; Event 1; Frame 21 for 30s. Image has not downloaded in alloted time period.
[02/27/19 21:14:18.580][DEBUG] [Sequence Thread] GNS: Sent timed event to GNS...
[02/27/19 21:14:18.581][DEBUG] [Sequence Thread] EventMarker 13 - t:m81 (1); e:0; f:20; o:
[02/27/19 21:14:42.506][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:14:42.518][DEBUG] [MF Update Thread] Performing serialize...
[02/27/19 21:14:48.608][DEBUG] [Sequence Thread] EventMarker 15 - t:m81 (1); e:0; f:20; o:
[02/27/19 21:14:48.613][DEBUG] [Sequence Thread] Waking from exposure time sleep period...
[02/27/19 21:14:48.613][DEBUG] [Sequence Thread] Checking to see if the CCD has a temp...
[02/27/19 21:14:48.613][DEBUG] [Sequence Thread] Saving the CCD temp...
[02/27/19 21:14:48.621][DEBUG] [Sequence Thread] Entering super dangerous loop to await image completion...
[02/27/19 21:14:48.623][DEBUG] [Sequence Thread] EventMarker 16 - t:m81 (1); e:0; f:20; o:
[02/27/19 21:14:49.726][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE complete...
[02/27/19 21:14:50.234][DEBUG] [Sequence Thread] EventMarker 17 - t:m81 (1); e:0; f:20; o:
[02/27/19 21:14:50.234][DEBUG] [Sequence Thread] Image reported as complete.  Continuing...
[02/27/19 21:14:50.234][DEBUG] [Sequence Thread] Collecting FITs headers...
[02/27/19 21:14:50.235][DEBUG] [Sequence Thread] ASCOM Camera: Could not get last exposure start time.  Reported as (unknown)
[02/27/19 21:14:50.235][DEBUG] [Sequence Thread] DATE-LOC time provided by SGPro (failed to retrieve valid entry from camera)...
[02/27/19 21:14:50.236][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info for last solve...
[02/27/19 21:14:50.236][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info from UI...
[02/27/19 21:14:50.236][DEBUG] [Sequence Thread] Clearing timed monitoring events...
[02/27/19 21:14:50.240][DEBUG] [Sequence Thread] Created full file name (file does not exist): C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_211417_frame21_-15C.fit
[02/27/19 21:14:50.240][DEBUG] [Sequence Thread] SaveFileAscom: Start...
[02/27/19 21:14:50.240][DEBUG] [Sequence Thread] SaveFileAscom: Checking image data...
[02/27/19 21:14:50.240][DEBUG] [Sequence Thread] SaveFileAscom: Create normal preview bitmap...
[02/27/19 21:14:50.247][DEBUG] [Sequence Thread] SaveFileAscom: Locking preview bits...
[02/27/19 21:14:50.247][DEBUG] [Sequence Thread] SaveFileAscom: Validating file name...
[02/27/19 21:14:50.247][DEBUG] [Sequence Thread] SaveFileAscom: Starting byte traversal...
[02/27/19 21:14:50.414][DEBUG] [Sequence Thread] SaveFileAscom: Unlocking preview bits...
[02/27/19 21:14:50.414][DEBUG] [Sequence Thread] SaveFileAscom: Saving preview bitmap to disk...
[02/27/19 21:14:50.414][DEBUG] [Sequence Thread] SaveFileBmp16: Locking bitmap for disk write...
[02/27/19 21:14:50.414][DEBUG] [Sequence Thread] SaveFileBmp16: Opening file stream...
[02/27/19 21:14:50.415][DEBUG] [Sequence Thread] SaveFileBmp16: Writing FITS headers...
[02/27/19 21:14:50.415][DEBUG] [Sequence Thread] SaveFileBmp16: Traversing and persisting bitmap data...
[02/27/19 21:14:50.580][DEBUG] [Sequence Thread] SaveFileBmp16: FITS block fill...
[02/27/19 21:14:50.580][DEBUG] [Sequence Thread] SaveFileBmp16: Unlocking bitmap...
[02/27/19 21:14:50.580][DEBUG] [Sequence Thread] SaveFileBmp16: Closing file stream
[02/27/19 21:14:50.584][DEBUG] [Sequence Thread] SaveFileAscom: Displaying image preview in UI...
[02/27/19 21:14:50.584][DEBUG] [Sequence Thread] Internal Interface: Set Preview...
[02/27/19 21:14:50.584][DEBUG] [Sequence Thread] Display image preview using asynch task...
[02/27/19 21:14:50.851][DEBUG] [Main Thread] --> Find stars (normal)
[02/27/19 21:14:50.913][DEBUG] [Main Thread] AF frame was too large... downsample = 0.5...
[02/27/19 21:14:52.350][DEBUG] [Main Thread] Star detection using min star size of 3px...
[02/27/19 21:14:52.350][DEBUG] [Main Thread] Star detection using max star size of 60px...
[02/27/19 21:14:52.394][DEBUG] [Main Thread] Find stars took: 1543 ms...
[02/27/19 21:14:52.394][DEBUG] [Main Thread] Star list contains 187 stars...
[02/27/19 21:14:52.394][DEBUG] [Main Thread] Calculating HFR with sample size: 6
[02/27/19 21:14:53.263][DEBUG] [Sequence Thread] SaveFileAscom: Done
[02/27/19 21:14:53.263][DEBUG] [Sequence Thread] =========== Save file took 3026 ms
[02/27/19 21:14:53.263][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_211417_frame21_-15C.fit" saved.  HFR = 2.61.
[02/27/19 21:14:53.263][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_211417_frame21_-15C.fit" saved.  HFR = 2.61.)...
[02/27/19 21:14:53.278][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:14:53.278][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:0; f:20; o:
[02/27/19 21:14:53.278][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:14:53.278][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:14:53.278][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:14:53.379][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:14:53.379][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:14:53.379][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:0; f:20; o:
[02/27/19 21:14:53.379][DEBUG] [Sequence Thread] EventMarker 18 - t:m81 (1); e:0; f:20; o:
[02/27/19 21:14:53.389][DEBUG] [Sequence Thread] EventMarker 19 - t:m81 (1); e:0; f:21; o:
[02/27/19 21:14:53.389][DEBUG] [Sequence Thread] EventMarker 20 - t:m81 (1); e:0; f:21; o:
[02/27/19 21:14:53.389][DEBUG] [Sequence Thread] Running post event...
[02/27/19 21:14:53.389][DEBUG] [Sequence Thread] EventMarker 21 - t:m81 (1); e:0; f:21; o:
[02/27/19 21:14:53.394][DEBUG] [Sequence Thread] Incremented numComplete (21) for event[0]...
[02/27/19 21:14:53.395][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:14:53.395][DEBUG] [Sequence Thread] Current event[0] frame count: 21/120...
[02/27/19 21:14:53.395][DEBUG] [Sequence Thread] Current event event[0] has remaining frames.  Returning current event.
[02/27/19 21:14:53.396][DEBUG] [Sequence Thread] Checking for auto manual focus (post)...
[02/27/19 21:14:53.396][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:14:53.408][DEBUG] [Sequence Thread] Attempting to move to next event...
[02/27/19 21:14:53.408][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:14:53.408][DEBUG] [Sequence Thread] Current event[0] frame count: 21/120...
[02/27/19 21:14:53.408][DEBUG] [Sequence Thread] Current event event[0] has remaining frames.  Returning current event.
[02/27/19 21:14:53.408][DEBUG] [Sequence Thread] Running pre event...
[02/27/19 21:14:53.425][DEBUG] [Sequence Thread] Current target has end time at 28/02/2019 06:30:00
[02/27/19 21:14:53.425][DEBUG] [Sequence Thread] End time of next frame is at 27/02/2019 21:15:23
[02/27/19 21:14:53.425][DEBUG] [Sequence Thread] Target is still before end time, continuing...
[02/27/19 21:14:53.425][DEBUG] [Sequence Thread] Running capture event...
[02/27/19 21:14:53.427][DEBUG] [Sequence Thread] ------------- Starting capture frame for event[0] -------------
[02/27/19 21:14:53.448][DEBUG] [Sequence Thread] Sending commands...
[02/27/19 21:14:53.448][DEBUG] [Sequence Thread] SetFlatBox: Frame Type is Light
[02/27/19 21:14:53.448][DEBUG] [Sequence Thread] EventMarker 2 - t:m81 (1); e:0; f:21; o:
[02/27/19 21:14:53.448][DEBUG] [Sequence Thread] Checking if Meridian Flip is needed
[02/27/19 21:14:53.448][DEBUG] [Sequence Thread] Telescope is on the West side of the mount
[02/27/19 21:14:53.448][DEBUG] [Sequence Thread] Meridian Flip not needed, Hour Angle < Degrees Past To Flip: -37.6292014861914 < 0
[02/27/19 21:14:53.448][DEBUG] [Sequence Thread] EventMarker 3 - t:m81 (1); e:0; f:21; o:
[02/27/19 21:14:53.449][DEBUG] [Sequence Thread] EventMarker 4 - t:m81 (1); e:0; f:21; o:
[02/27/19 21:14:53.449][DEBUG] [Sequence Thread] Setting filter position 1...
[02/27/19 21:14:53.449][DEBUG] [Sequence Thread] Filter position 1 is already set.  Skipping...
[02/27/19 21:14:53.449][DEBUG] [Sequence Thread] EventMarker 5 - t:m81 (1); e:0; f:21; o:
[02/27/19 21:14:53.449][DEBUG] [Sequence Thread] Checking for auto manual focus (pre)...
[02/27/19 21:14:53.449][DEBUG] [Sequence Thread] EventMarker 6 - t:m81 (1); e:0; f:21; o:
[02/27/19 21:14:53.452][DEBUG] [Sequence Thread] Autoguider will not dither this frame. Total frames is not a modulus of 5
[02/27/19 21:14:53.452][DEBUG] [Sequence Thread] EventMarker 1 - t:m81 (1); e:0; f:21; o:
[02/27/19 21:14:53.453][DEBUG] [Sequence Thread] Created base name for frame capture: m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_211453_frame22_-15C
[02/27/19 21:14:53.453][DEBUG] [Sequence Thread] Created directory for frame capture: C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\
[02/27/19 21:14:53.453][DEBUG] [Sequence Thread] EventMarker 7 - t:m81 (1); e:0; f:21; o:
[02/27/19 21:14:53.453][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:14:53.453][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:0; f:21; o:
[02/27/19 21:14:53.453][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:14:53.453][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:14:53.453][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:14:53.554][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:14:53.554][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:14:53.554][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:0; f:21; o:
[02/27/19 21:14:53.554][DEBUG] [Sequence Thread] {"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}
[02/27/19 21:14:53.554][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}

[02/27/19 21:14:53.554][DEBUG] [Sequence Thread] EventMarker 172 - t:m81 (1); e:0; f:21; o:
[02/27/19 21:14:53.554][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:14:53.554][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:14:53.554][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:14:53.654][DEBUG] [PHD2 Listener Thread] Unknown object from PHD2: {"Event":"SettleBegin","Timestamp":1551302093.603,"Host":"JGL2_2","Inst":1}
[02/27/19 21:14:53.655][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:14:53.655][DEBUG] [Sequence Thread] EventMarker 173 - t:m81 (1); e:0; f:21; o:
[02/27/19 21:14:53.656][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Attempting to settle the auto guider...
[02/27/19 21:14:53.656][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Attempting to settle the auto guider...)...
[02/27/19 21:14:53.656][DEBUG] [Sequence Thread] Waiting for Auto Guider distance to fall below 0.5
[02/27/19 21:14:53.656][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:14:53.656][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:14:53.666][DEBUG] [Sequence Thread] Distance is below 0.5, starting timer...
[02/27/19 21:14:54.168][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:14:54.168][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:14:54.496][DEBUG] [Sequence Thread] Distance stayed below 0.5 for 0 seconds, done settling...
[02/27/19 21:14:54.497][DEBUG] [Sequence Thread] SGPro settle criteria have been met, but the guider reports it is not ready to resume, waiting...
[02/27/19 21:14:54.563][DEBUG] [PHD2 Listener Thread] PHD2: Settle done received: GOOD
[02/27/19 21:14:55.001][DEBUG] [Sequence Thread] Auto guider has settled...
[02/27/19 21:14:55.002][DEBUG] [Sequence Thread] EventMarker 8 - t:m81 (1); e:0; f:21; o:
[02/27/19 21:14:55.002][DEBUG] [Sequence Thread] EventMarker 9 - t:m81 (1); e:0; f:21; o:
[02/27/19 21:14:55.002][DEBUG] [Sequence Thread] EventMarker 10 - t:m81 (1); e:0; f:21; o:
[02/27/19 21:14:55.002][DEBUG] [Sequence Thread] Finished sending frame capture.  Entering wait mode...
[02/27/19 21:14:55.002][DEBUG] [Sequence Thread] EventMarker 11 - t:m81 (1); e:0; f:21; o:
[02/27/19 21:14:55.003][DEBUG] [Sequence Thread] EventMarker 12 - t:m81 (1); e:0; f:21; o:
[02/27/19 21:14:55.007][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE message received...
[02/27/19 21:14:55.008][DEBUG] [Camera Thread] SetAscomGain to 76
[02/27/19 21:14:55.009][DEBUG] [Camera Thread] Camera gain set to 76
[02/27/19 21:14:55.009][DEBUG] [Camera Thread] SetAscomNormalSpeed... 
[02/27/19 21:14:55.009][DEBUG] [Camera Thread] Cannot set readout speed, not supported by camera...
[02/27/19 21:14:55.011][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Starting integration of m81; Event 1; Frame 22 for 30s...
[02/27/19 21:14:55.011][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Starting integration of m81; Event 1; Frame 22 for 30s...)...
[02/27/19 21:14:55.011][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, TimedError): (2019-02-25) Failure while integrating m81; Event 1; Frame 22 for 30s. Image has not downloaded in alloted time period.
[02/27/19 21:14:55.011][DEBUG] [Sequence Thread] GNS: Sent timed event to GNS...
[02/27/19 21:14:55.012][DEBUG] [Sequence Thread] EventMarker 13 - t:m81 (1); e:0; f:21; o:
[02/27/19 21:15:25.185][DEBUG] [Sequence Thread] EventMarker 15 - t:m81 (1); e:0; f:21; o:
[02/27/19 21:15:25.188][DEBUG] [Sequence Thread] Waking from exposure time sleep period...
[02/27/19 21:15:25.188][DEBUG] [Sequence Thread] Checking to see if the CCD has a temp...
[02/27/19 21:15:25.188][DEBUG] [Sequence Thread] Saving the CCD temp...
[02/27/19 21:15:25.196][DEBUG] [Sequence Thread] Entering super dangerous loop to await image completion...
[02/27/19 21:15:25.199][DEBUG] [Sequence Thread] EventMarker 16 - t:m81 (1); e:0; f:21; o:
[02/27/19 21:15:26.136][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE complete...
[02/27/19 21:15:26.204][DEBUG] [Sequence Thread] EventMarker 17 - t:m81 (1); e:0; f:21; o:
[02/27/19 21:15:26.204][DEBUG] [Sequence Thread] Image reported as complete.  Continuing...
[02/27/19 21:15:26.204][DEBUG] [Sequence Thread] Collecting FITs headers...
[02/27/19 21:15:26.205][DEBUG] [Sequence Thread] ASCOM Camera: Could not get last exposure start time.  Reported as (unknown)
[02/27/19 21:15:26.205][DEBUG] [Sequence Thread] DATE-LOC time provided by SGPro (failed to retrieve valid entry from camera)...
[02/27/19 21:15:26.205][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info for last solve...
[02/27/19 21:15:26.205][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info from UI...
[02/27/19 21:15:26.205][DEBUG] [Sequence Thread] Clearing timed monitoring events...
[02/27/19 21:15:26.209][DEBUG] [Sequence Thread] Created full file name (file does not exist): C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_211453_frame22_-15C.fit
[02/27/19 21:15:26.209][DEBUG] [Sequence Thread] SaveFileAscom: Start...
[02/27/19 21:15:26.209][DEBUG] [Sequence Thread] SaveFileAscom: Checking image data...
[02/27/19 21:15:26.209][DEBUG] [Sequence Thread] SaveFileAscom: Create normal preview bitmap...
[02/27/19 21:15:26.215][DEBUG] [Sequence Thread] SaveFileAscom: Locking preview bits...
[02/27/19 21:15:26.215][DEBUG] [Sequence Thread] SaveFileAscom: Validating file name...
[02/27/19 21:15:26.215][DEBUG] [Sequence Thread] SaveFileAscom: Starting byte traversal...
[02/27/19 21:15:26.398][DEBUG] [Sequence Thread] SaveFileAscom: Unlocking preview bits...
[02/27/19 21:15:26.399][DEBUG] [Sequence Thread] SaveFileAscom: Saving preview bitmap to disk...
[02/27/19 21:15:26.399][DEBUG] [Sequence Thread] SaveFileBmp16: Locking bitmap for disk write...
[02/27/19 21:15:26.399][DEBUG] [Sequence Thread] SaveFileBmp16: Opening file stream...
[02/27/19 21:15:26.399][DEBUG] [Sequence Thread] SaveFileBmp16: Writing FITS headers...
[02/27/19 21:15:26.400][DEBUG] [Sequence Thread] SaveFileBmp16: Traversing and persisting bitmap data...
[02/27/19 21:15:26.561][DEBUG] [Sequence Thread] SaveFileBmp16: FITS block fill...
[02/27/19 21:15:26.561][DEBUG] [Sequence Thread] SaveFileBmp16: Unlocking bitmap...
[02/27/19 21:15:26.561][DEBUG] [Sequence Thread] SaveFileBmp16: Closing file stream
[02/27/19 21:15:26.565][DEBUG] [Sequence Thread] SaveFileAscom: Displaying image preview in UI...
[02/27/19 21:15:26.565][DEBUG] [Sequence Thread] Internal Interface: Set Preview...
[02/27/19 21:15:26.565][DEBUG] [Sequence Thread] Display image preview using asynch task...
[02/27/19 21:15:27.979][DEBUG] [Sequence Thread] SaveFileAscom: Done
[02/27/19 21:15:27.979][DEBUG] [Sequence Thread] =========== Save file took 1774 ms
[02/27/19 21:15:27.979][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_211453_frame22_-15C.fit" saved.  HFR = 2.61.
[02/27/19 21:15:27.979][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_211453_frame22_-15C.fit" saved.  HFR = 2.61.)...
[02/27/19 21:15:27.985][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:15:27.985][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:0; f:21; o:
[02/27/19 21:15:27.985][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:15:27.985][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:15:27.985][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:15:28.086][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:15:28.086][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:15:28.086][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:0; f:21; o:
[02/27/19 21:15:28.086][DEBUG] [Sequence Thread] EventMarker 18 - t:m81 (1); e:0; f:21; o:
[02/27/19 21:15:28.090][DEBUG] [Sequence Thread] EventMarker 19 - t:m81 (1); e:0; f:22; o:
[02/27/19 21:15:28.091][DEBUG] [Sequence Thread] EventMarker 20 - t:m81 (1); e:0; f:22; o:
[02/27/19 21:15:28.091][DEBUG] [Sequence Thread] Running post event...
[02/27/19 21:15:28.091][DEBUG] [Sequence Thread] EventMarker 21 - t:m81 (1); e:0; f:22; o:
[02/27/19 21:15:28.099][DEBUG] [Sequence Thread] Incremented numComplete (22) for event[0]...
[02/27/19 21:15:28.100][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:15:28.100][DEBUG] [Sequence Thread] Current event[0] frame count: 22/120...
[02/27/19 21:15:28.100][DEBUG] [Sequence Thread] Current event event[0] has remaining frames.  Returning current event.
[02/27/19 21:15:28.100][DEBUG] [Sequence Thread] Checking for auto manual focus (post)...
[02/27/19 21:15:28.100][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:15:28.112][DEBUG] [Sequence Thread] Attempting to move to next event...
[02/27/19 21:15:28.112][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:15:28.112][DEBUG] [Sequence Thread] Current event[0] frame count: 22/120...
[02/27/19 21:15:28.112][DEBUG] [Sequence Thread] Current event event[0] has remaining frames.  Returning current event.
[02/27/19 21:15:28.112][DEBUG] [Sequence Thread] Running pre event...
[02/27/19 21:15:28.148][DEBUG] [Sequence Thread] Current target has end time at 28/02/2019 06:30:00
[02/27/19 21:15:28.148][DEBUG] [Sequence Thread] End time of next frame is at 27/02/2019 21:15:58
[02/27/19 21:15:28.148][DEBUG] [Sequence Thread] Target is still before end time, continuing...
[02/27/19 21:15:28.148][DEBUG] [Sequence Thread] Running capture event...
[02/27/19 21:15:28.150][DEBUG] [Sequence Thread] ------------- Starting capture frame for event[0] -------------
[02/27/19 21:15:28.155][DEBUG] [Sequence Thread] Sending commands...
[02/27/19 21:15:28.155][DEBUG] [Sequence Thread] SetFlatBox: Frame Type is Light
[02/27/19 21:15:28.155][DEBUG] [Sequence Thread] EventMarker 2 - t:m81 (1); e:0; f:22; o:
[02/27/19 21:15:28.155][DEBUG] [Sequence Thread] Checking if Meridian Flip is needed
[02/27/19 21:15:28.155][DEBUG] [Sequence Thread] Telescope is on the West side of the mount
[02/27/19 21:15:28.155][DEBUG] [Sequence Thread] Meridian Flip not needed, Hour Angle < Degrees Past To Flip: -37.4869387110075 < 0
[02/27/19 21:15:28.155][DEBUG] [Sequence Thread] EventMarker 3 - t:m81 (1); e:0; f:22; o:
[02/27/19 21:15:28.156][DEBUG] [Sequence Thread] EventMarker 4 - t:m81 (1); e:0; f:22; o:
[02/27/19 21:15:28.156][DEBUG] [Sequence Thread] Setting filter position 1...
[02/27/19 21:15:28.156][DEBUG] [Sequence Thread] Filter position 1 is already set.  Skipping...
[02/27/19 21:15:28.156][DEBUG] [Sequence Thread] EventMarker 5 - t:m81 (1); e:0; f:22; o:
[02/27/19 21:15:28.156][DEBUG] [Sequence Thread] Checking for auto manual focus (pre)...
[02/27/19 21:15:28.156][DEBUG] [Sequence Thread] EventMarker 6 - t:m81 (1); e:0; f:22; o:
[02/27/19 21:15:28.163][DEBUG] [Sequence Thread] Autoguider will not dither this frame. Total frames is not a modulus of 5
[02/27/19 21:15:28.163][DEBUG] [Sequence Thread] EventMarker 1 - t:m81 (1); e:0; f:22; o:
[02/27/19 21:15:28.164][DEBUG] [Sequence Thread] Created base name for frame capture: m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_211528_frame23_-15C
[02/27/19 21:15:28.164][DEBUG] [Sequence Thread] Created directory for frame capture: C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\
[02/27/19 21:15:28.164][DEBUG] [Sequence Thread] EventMarker 7 - t:m81 (1); e:0; f:22; o:
[02/27/19 21:15:28.164][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:15:28.164][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:0; f:22; o:
[02/27/19 21:15:28.164][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:15:28.164][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:15:28.164][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:15:28.265][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:15:28.265][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:15:28.265][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:0; f:22; o:
[02/27/19 21:15:28.265][DEBUG] [Sequence Thread] {"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}
[02/27/19 21:15:28.265][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}

[02/27/19 21:15:28.265][DEBUG] [Sequence Thread] EventMarker 172 - t:m81 (1); e:0; f:22; o:
[02/27/19 21:15:28.265][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:15:28.265][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:15:28.265][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:15:28.345][DEBUG] [PHD2 Listener Thread] Unknown object from PHD2: {"Event":"SettleBegin","Timestamp":1551302128.296,"Host":"JGL2_2","Inst":1}
[02/27/19 21:15:28.366][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:15:28.366][DEBUG] [Sequence Thread] EventMarker 173 - t:m81 (1); e:0; f:22; o:
[02/27/19 21:15:28.366][DEBUG] [Sequence Thread] User has elected to skip guider settling over time...
[02/27/19 21:15:28.366][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Attempting to settle the auto guider...
[02/27/19 21:15:28.366][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Attempting to settle the auto guider...)...
[02/27/19 21:15:28.366][DEBUG] [Sequence Thread] Waiting for Auto Guider distance to fall below 0.5
[02/27/19 21:15:28.366][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:15:28.366][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:15:28.372][DEBUG] [Sequence Thread] Distance is below 0.5, starting timer...
[02/27/19 21:15:28.873][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:15:28.873][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:15:28.879][DEBUG] [Sequence Thread] Distance stayed below 0.5 for 0 seconds, done settling...
[02/27/19 21:15:28.880][DEBUG] [Sequence Thread] Auto guider has settled...
[02/27/19 21:15:28.880][DEBUG] [Sequence Thread] EventMarker 8 - t:m81 (1); e:0; f:22; o:
[02/27/19 21:15:28.880][DEBUG] [Sequence Thread] EventMarker 9 - t:m81 (1); e:0; f:22; o:
[02/27/19 21:15:28.880][DEBUG] [Sequence Thread] EventMarker 10 - t:m81 (1); e:0; f:22; o:
[02/27/19 21:15:28.880][DEBUG] [Sequence Thread] Finished sending frame capture.  Entering wait mode...
[02/27/19 21:15:28.880][DEBUG] [Sequence Thread] EventMarker 11 - t:m81 (1); e:0; f:22; o:
[02/27/19 21:15:28.880][DEBUG] [Sequence Thread] EventMarker 12 - t:m81 (1); e:0; f:22; o:
[02/27/19 21:15:28.887][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Starting integration of m81; Event 1; Frame 23 for 30s...
[02/27/19 21:15:28.887][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Starting integration of m81; Event 1; Frame 23 for 30s...)...
[02/27/19 21:15:28.887][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, TimedError): (2019-02-25) Failure while integrating m81; Event 1; Frame 23 for 30s. Image has not downloaded in alloted time period.
[02/27/19 21:15:28.887][DEBUG] [Sequence Thread] GNS: Sent timed event to GNS...
[02/27/19 21:15:28.887][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE message received...
[02/27/19 21:15:28.888][DEBUG] [Sequence Thread] EventMarker 13 - t:m81 (1); e:0; f:22; o:
[02/27/19 21:15:28.888][DEBUG] [Camera Thread] SetAscomGain to 76
[02/27/19 21:15:28.889][DEBUG] [Camera Thread] Camera gain set to 76
[02/27/19 21:15:28.889][DEBUG] [Camera Thread] SetAscomNormalSpeed... 
[02/27/19 21:15:28.889][DEBUG] [Camera Thread] Cannot set readout speed, not supported by camera...
[02/27/19 21:15:30.215][DEBUG] [PHD2 Listener Thread] PHD2: Settle done received: GOOD
[02/27/19 21:15:44.686][DEBUG] [Main Thread] --> Find stars (normal)
[02/27/19 21:15:44.750][DEBUG] [Main Thread] AF frame was too large... downsample = 0.5...
[02/27/19 21:15:46.180][DEBUG] [Main Thread] Star detection using min star size of 3px...
[02/27/19 21:15:46.180][DEBUG] [Main Thread] Star detection using max star size of 60px...
[02/27/19 21:15:46.226][DEBUG] [Main Thread] Find stars took: 1540 ms...
[02/27/19 21:15:46.226][DEBUG] [Main Thread] Star list contains 180 stars...
[02/27/19 21:15:46.226][DEBUG] [Main Thread] Calculating HFR with sample size: 6
[02/27/19 21:15:59.049][DEBUG] [Sequence Thread] EventMarker 15 - t:m81 (1); e:0; f:22; o:
[02/27/19 21:15:59.428][DEBUG] [Sequence Thread] Waking from exposure time sleep period...
[02/27/19 21:15:59.428][DEBUG] [Sequence Thread] Checking to see if the CCD has a temp...
[02/27/19 21:15:59.428][DEBUG] [Sequence Thread] Saving the CCD temp...
[02/27/19 21:15:59.432][DEBUG] [Sequence Thread] Entering super dangerous loop to await image completion...
[02/27/19 21:15:59.435][DEBUG] [Sequence Thread] EventMarker 16 - t:m81 (1); e:0; f:22; o:
[02/27/19 21:16:12.299][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:16:12.313][DEBUG] [MF Update Thread] Performing serialize...
[02/27/19 21:16:30.569][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE complete...
[02/27/19 21:16:30.979][DEBUG] [Sequence Thread] EventMarker 17 - t:m81 (1); e:0; f:22; o:
[02/27/19 21:16:30.979][DEBUG] [Sequence Thread] Image reported as complete.  Continuing...
[02/27/19 21:16:30.979][DEBUG] [Sequence Thread] Collecting FITs headers...
[02/27/19 21:16:30.980][DEBUG] [Sequence Thread] ASCOM Camera: Could not get last exposure start time.  Reported as (unknown)
[02/27/19 21:16:30.981][DEBUG] [Sequence Thread] DATE-LOC time provided by SGPro (failed to retrieve valid entry from camera)...
[02/27/19 21:16:30.982][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info for last solve...
[02/27/19 21:16:30.982][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info from UI...
[02/27/19 21:16:30.983][DEBUG] [Sequence Thread] Clearing timed monitoring events...
[02/27/19 21:16:30.990][DEBUG] [Sequence Thread] Created full file name (file does not exist): C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_211528_frame23_-15C.fit
[02/27/19 21:16:30.990][DEBUG] [Sequence Thread] SaveFileAscom: Start...
[02/27/19 21:16:30.990][DEBUG] [Sequence Thread] SaveFileAscom: Checking image data...
[02/27/19 21:16:30.990][DEBUG] [Sequence Thread] SaveFileAscom: Create normal preview bitmap...
[02/27/19 21:16:30.999][DEBUG] [Sequence Thread] SaveFileAscom: Locking preview bits...
[02/27/19 21:16:30.999][DEBUG] [Sequence Thread] SaveFileAscom: Validating file name...
[02/27/19 21:16:30.999][DEBUG] [Sequence Thread] SaveFileAscom: Starting byte traversal...
[02/27/19 21:16:31.170][DEBUG] [Sequence Thread] SaveFileAscom: Unlocking preview bits...
[02/27/19 21:16:31.170][DEBUG] [Sequence Thread] SaveFileAscom: Saving preview bitmap to disk...
[02/27/19 21:16:31.170][DEBUG] [Sequence Thread] SaveFileBmp16: Locking bitmap for disk write...
[02/27/19 21:16:31.170][DEBUG] [Sequence Thread] SaveFileBmp16: Opening file stream...
[02/27/19 21:16:31.171][DEBUG] [Sequence Thread] SaveFileBmp16: Writing FITS headers...
[02/27/19 21:16:31.171][DEBUG] [Sequence Thread] SaveFileBmp16: Traversing and persisting bitmap data...
[02/27/19 21:16:31.346][DEBUG] [Sequence Thread] SaveFileBmp16: FITS block fill...
[02/27/19 21:16:31.346][DEBUG] [Sequence Thread] SaveFileBmp16: Unlocking bitmap...
[02/27/19 21:16:31.346][DEBUG] [Sequence Thread] SaveFileBmp16: Closing file stream
[02/27/19 21:16:31.351][DEBUG] [Sequence Thread] SaveFileAscom: Displaying image preview in UI...
[02/27/19 21:16:31.351][DEBUG] [Sequence Thread] Internal Interface: Set Preview...
[02/27/19 21:16:31.351][DEBUG] [Sequence Thread] Display image preview using asynch task...
[02/27/19 21:16:32.396][DEBUG] [Sequence Thread] SaveFileAscom: Done
[02/27/19 21:16:32.396][DEBUG] [Sequence Thread] =========== Save file took 1412 ms
[02/27/19 21:16:32.396][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_211528_frame23_-15C.fit" saved.  HFR = 2.61.
[02/27/19 21:16:32.396][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_211528_frame23_-15C.fit" saved.  HFR = 2.61.)...
[02/27/19 21:16:32.408][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:16:32.408][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:0; f:22; o:
[02/27/19 21:16:32.408][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:16:32.408][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:16:32.408][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:16:32.509][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:16:32.509][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:16:32.509][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:0; f:22; o:
[02/27/19 21:16:32.509][DEBUG] [Sequence Thread] EventMarker 18 - t:m81 (1); e:0; f:22; o:
[02/27/19 21:16:32.515][DEBUG] [Sequence Thread] EventMarker 19 - t:m81 (1); e:0; f:23; o:
[02/27/19 21:16:32.515][DEBUG] [Sequence Thread] EventMarker 20 - t:m81 (1); e:0; f:23; o:
[02/27/19 21:16:32.515][DEBUG] [Sequence Thread] Running post event...
[02/27/19 21:16:32.515][DEBUG] [Sequence Thread] EventMarker 21 - t:m81 (1); e:0; f:23; o:
[02/27/19 21:16:32.523][DEBUG] [Sequence Thread] Incremented numComplete (23) for event[0]...
[02/27/19 21:16:32.525][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:16:32.525][DEBUG] [Sequence Thread] Current event[0] frame count: 23/120...
[02/27/19 21:16:32.525][DEBUG] [Sequence Thread] Current event event[0] has remaining frames.  Returning current event.
[02/27/19 21:16:32.525][DEBUG] [Sequence Thread] Checking for auto manual focus (post)...
[02/27/19 21:16:32.526][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:16:32.543][DEBUG] [Sequence Thread] Attempting to move to next event...
[02/27/19 21:16:32.543][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:16:32.543][DEBUG] [Sequence Thread] Current event[0] frame count: 23/120...
[02/27/19 21:16:32.543][DEBUG] [Sequence Thread] Current event event[0] has remaining frames.  Returning current event.
[02/27/19 21:16:32.543][DEBUG] [Sequence Thread] Running pre event...
[02/27/19 21:16:32.628][DEBUG] [Sequence Thread] Current target has end time at 28/02/2019 06:30:00
[02/27/19 21:16:32.628][DEBUG] [Sequence Thread] End time of next frame is at 27/02/2019 21:17:02
[02/27/19 21:16:32.628][DEBUG] [Sequence Thread] Target is still before end time, continuing...
[02/27/19 21:16:32.628][DEBUG] [Sequence Thread] Running capture event...
[02/27/19 21:16:32.630][DEBUG] [Sequence Thread] ------------- Starting capture frame for event[0] -------------
[02/27/19 21:16:32.640][DEBUG] [Sequence Thread] Sending commands...
[02/27/19 21:16:32.640][DEBUG] [Sequence Thread] SetFlatBox: Frame Type is Light
[02/27/19 21:16:32.640][DEBUG] [Sequence Thread] EventMarker 2 - t:m81 (1); e:0; f:23; o:
[02/27/19 21:16:32.640][DEBUG] [Sequence Thread] Checking if Meridian Flip is needed
[02/27/19 21:16:32.640][DEBUG] [Sequence Thread] Telescope is on the West side of the mount
[02/27/19 21:16:32.640][DEBUG] [Sequence Thread] Meridian Flip not needed, Hour Angle < Degrees Past To Flip: -37.2173221461836 < 0
[02/27/19 21:16:32.640][DEBUG] [Sequence Thread] EventMarker 3 - t:m81 (1); e:0; f:23; o:
[02/27/19 21:16:32.640][DEBUG] [Sequence Thread] EventMarker 4 - t:m81 (1); e:0; f:23; o:
[02/27/19 21:16:32.640][DEBUG] [Sequence Thread] Setting filter position 1...
[02/27/19 21:16:32.640][DEBUG] [Sequence Thread] Filter position 1 is already set.  Skipping...
[02/27/19 21:16:32.640][DEBUG] [Sequence Thread] EventMarker 5 - t:m81 (1); e:0; f:23; o:
[02/27/19 21:16:32.640][DEBUG] [Sequence Thread] Checking for auto manual focus (pre)...
[02/27/19 21:16:32.640][DEBUG] [Sequence Thread] EventMarker 6 - t:m81 (1); e:0; f:23; o:
[02/27/19 21:16:32.648][DEBUG] [Sequence Thread] Autoguider will not dither this frame. Total frames is not a modulus of 5
[02/27/19 21:16:32.648][DEBUG] [Sequence Thread] EventMarker 1 - t:m81 (1); e:0; f:23; o:
[02/27/19 21:16:32.649][DEBUG] [Sequence Thread] Created base name for frame capture: m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_211632_frame24_-15C
[02/27/19 21:16:32.649][DEBUG] [Sequence Thread] Created directory for frame capture: C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\
[02/27/19 21:16:32.649][DEBUG] [Sequence Thread] EventMarker 7 - t:m81 (1); e:0; f:23; o:
[02/27/19 21:16:32.649][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:16:32.649][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:0; f:23; o:
[02/27/19 21:16:32.649][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:16:32.649][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:16:32.649][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:16:32.750][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:16:32.750][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:16:32.750][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:0; f:23; o:
[02/27/19 21:16:32.750][DEBUG] [Sequence Thread] {"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}
[02/27/19 21:16:32.750][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}

[02/27/19 21:16:32.750][DEBUG] [Sequence Thread] EventMarker 172 - t:m81 (1); e:0; f:23; o:
[02/27/19 21:16:32.750][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:16:32.750][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:16:32.750][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:16:32.832][DEBUG] [PHD2 Listener Thread] Unknown object from PHD2: {"Event":"SettleBegin","Timestamp":1551302192.782,"Host":"JGL2_2","Inst":1}
[02/27/19 21:16:32.852][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:16:32.852][DEBUG] [Sequence Thread] EventMarker 173 - t:m81 (1); e:0; f:23; o:
[02/27/19 21:16:32.852][DEBUG] [Sequence Thread] User has elected to skip guider settling over time...
[02/27/19 21:16:32.853][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Attempting to settle the auto guider...
[02/27/19 21:16:32.853][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Attempting to settle the auto guider...)...
[02/27/19 21:16:32.853][DEBUG] [Sequence Thread] Waiting for Auto Guider distance to fall below 0.5
[02/27/19 21:16:32.853][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:16:32.853][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:16:32.864][DEBUG] [Sequence Thread] Distance is below 0.5, starting timer...
[02/27/19 21:16:33.365][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:16:33.365][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:16:33.507][DEBUG] [Sequence Thread] Distance stayed below 0.5 for 0 seconds, done settling...
[02/27/19 21:16:33.511][DEBUG] [Sequence Thread] Auto guider has settled...
[02/27/19 21:16:33.512][DEBUG] [Sequence Thread] EventMarker 8 - t:m81 (1); e:0; f:23; o:
[02/27/19 21:16:33.512][DEBUG] [Sequence Thread] EventMarker 9 - t:m81 (1); e:0; f:23; o:
[02/27/19 21:16:33.512][DEBUG] [Sequence Thread] EventMarker 10 - t:m81 (1); e:0; f:23; o:
[02/27/19 21:16:33.512][DEBUG] [Sequence Thread] Finished sending frame capture.  Entering wait mode...
[02/27/19 21:16:33.512][DEBUG] [Sequence Thread] EventMarker 11 - t:m81 (1); e:0; f:23; o:
[02/27/19 21:16:33.513][DEBUG] [Sequence Thread] EventMarker 12 - t:m81 (1); e:0; f:23; o:
[02/27/19 21:16:33.516][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Starting integration of m81; Event 1; Frame 24 for 30s...
[02/27/19 21:16:33.516][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Starting integration of m81; Event 1; Frame 24 for 30s...)...
[02/27/19 21:16:33.516][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, TimedError): (2019-02-25) Failure while integrating m81; Event 1; Frame 24 for 30s. Image has not downloaded in alloted time period.
[02/27/19 21:16:33.516][DEBUG] [Sequence Thread] GNS: Sent timed event to GNS...
[02/27/19 21:16:33.518][DEBUG] [Sequence Thread] EventMarker 13 - t:m81 (1); e:0; f:23; o:
[02/27/19 21:16:33.520][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE message received...
[02/27/19 21:16:33.521][DEBUG] [Camera Thread] SetAscomGain to 76
[02/27/19 21:16:33.522][DEBUG] [Camera Thread] Camera gain set to 76
[02/27/19 21:16:33.522][DEBUG] [Camera Thread] SetAscomNormalSpeed... 
[02/27/19 21:16:33.522][DEBUG] [Camera Thread] Cannot set readout speed, not supported by camera...
[02/27/19 21:16:34.198][DEBUG] [PHD2 Listener Thread] PHD2: Settle done received: GOOD
[02/27/19 21:17:03.621][DEBUG] [Sequence Thread] EventMarker 15 - t:m81 (1); e:0; f:23; o:
[02/27/19 21:17:03.625][DEBUG] [Sequence Thread] Waking from exposure time sleep period...
[02/27/19 21:17:03.625][DEBUG] [Sequence Thread] Checking to see if the CCD has a temp...
[02/27/19 21:17:03.625][DEBUG] [Sequence Thread] Saving the CCD temp...
[02/27/19 21:17:03.651][DEBUG] [Sequence Thread] Entering super dangerous loop to await image completion...
[02/27/19 21:17:03.652][DEBUG] [Sequence Thread] EventMarker 16 - t:m81 (1); e:0; f:23; o:
[02/27/19 21:17:06.676][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE complete...
[02/27/19 21:17:07.174][DEBUG] [Sequence Thread] EventMarker 17 - t:m81 (1); e:0; f:23; o:
[02/27/19 21:17:07.174][DEBUG] [Sequence Thread] Image reported as complete.  Continuing...
[02/27/19 21:17:07.174][DEBUG] [Sequence Thread] Collecting FITs headers...
[02/27/19 21:17:07.175][DEBUG] [Sequence Thread] ASCOM Camera: Could not get last exposure start time.  Reported as (unknown)
[02/27/19 21:17:07.175][DEBUG] [Sequence Thread] DATE-LOC time provided by SGPro (failed to retrieve valid entry from camera)...
[02/27/19 21:17:07.177][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info for last solve...
[02/27/19 21:17:07.177][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info from UI...
[02/27/19 21:17:07.177][DEBUG] [Sequence Thread] Clearing timed monitoring events...
[02/27/19 21:17:07.184][DEBUG] [Sequence Thread] Created full file name (file does not exist): C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_211632_frame24_-15C.fit
[02/27/19 21:17:07.184][DEBUG] [Sequence Thread] SaveFileAscom: Start...
[02/27/19 21:17:07.184][DEBUG] [Sequence Thread] SaveFileAscom: Checking image data...
[02/27/19 21:17:07.184][DEBUG] [Sequence Thread] SaveFileAscom: Create normal preview bitmap...
[02/27/19 21:17:07.194][DEBUG] [Sequence Thread] SaveFileAscom: Locking preview bits...
[02/27/19 21:17:07.194][DEBUG] [Sequence Thread] SaveFileAscom: Validating file name...
[02/27/19 21:17:07.194][DEBUG] [Sequence Thread] SaveFileAscom: Starting byte traversal...
[02/27/19 21:17:07.379][DEBUG] [Sequence Thread] SaveFileAscom: Unlocking preview bits...
[02/27/19 21:17:07.379][DEBUG] [Sequence Thread] SaveFileAscom: Saving preview bitmap to disk...
[02/27/19 21:17:07.379][DEBUG] [Sequence Thread] SaveFileBmp16: Locking bitmap for disk write...
[02/27/19 21:17:07.379][DEBUG] [Sequence Thread] SaveFileBmp16: Opening file stream...
[02/27/19 21:17:07.379][DEBUG] [Sequence Thread] SaveFileBmp16: Writing FITS headers...
[02/27/19 21:17:07.380][DEBUG] [Sequence Thread] SaveFileBmp16: Traversing and persisting bitmap data...
[02/27/19 21:17:07.548][DEBUG] [Sequence Thread] SaveFileBmp16: FITS block fill...
[02/27/19 21:17:07.548][DEBUG] [Sequence Thread] SaveFileBmp16: Unlocking bitmap...
[02/27/19 21:17:07.548][DEBUG] [Sequence Thread] SaveFileBmp16: Closing file stream
[02/27/19 21:17:07.552][DEBUG] [Sequence Thread] SaveFileAscom: Displaying image preview in UI...
[02/27/19 21:17:07.552][DEBUG] [Sequence Thread] Internal Interface: Set Preview...
[02/27/19 21:17:07.552][DEBUG] [Sequence Thread] Display image preview using asynch task...
[02/27/19 21:17:08.547][DEBUG] [Sequence Thread] SaveFileAscom: Done
[02/27/19 21:17:08.547][DEBUG] [Sequence Thread] =========== Save file took 1369 ms
[02/27/19 21:17:08.547][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_211632_frame24_-15C.fit" saved.  HFR = 2.61.
[02/27/19 21:17:08.547][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_211632_frame24_-15C.fit" saved.  HFR = 2.61.)...
[02/27/19 21:17:08.583][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:17:08.583][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:0; f:23; o:
[02/27/19 21:17:08.583][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:17:08.583][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:17:08.583][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:17:08.683][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:17:08.683][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:17:08.683][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:0; f:23; o:
[02/27/19 21:17:08.683][DEBUG] [Sequence Thread] EventMarker 18 - t:m81 (1); e:0; f:23; o:
[02/27/19 21:17:08.689][DEBUG] [Sequence Thread] EventMarker 19 - t:m81 (1); e:0; f:24; o:
[02/27/19 21:17:08.689][DEBUG] [Sequence Thread] EventMarker 20 - t:m81 (1); e:0; f:24; o:
[02/27/19 21:17:08.689][DEBUG] [Sequence Thread] Running post event...
[02/27/19 21:17:08.689][DEBUG] [Sequence Thread] EventMarker 21 - t:m81 (1); e:0; f:24; o:
[02/27/19 21:17:08.692][DEBUG] [Sequence Thread] Incremented numComplete (24) for event[0]...
[02/27/19 21:17:08.694][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:17:08.694][DEBUG] [Sequence Thread] Current event[0] frame count: 24/120...
[02/27/19 21:17:08.694][DEBUG] [Sequence Thread] Current event event[0] has remaining frames.  Returning current event.
[02/27/19 21:17:08.694][DEBUG] [Sequence Thread] Checking for auto manual focus (post)...
[02/27/19 21:17:08.694][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:17:08.706][DEBUG] [Sequence Thread] Attempting to move to next event...
[02/27/19 21:17:08.706][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:17:08.706][DEBUG] [Sequence Thread] Current event[0] frame count: 24/120...
[02/27/19 21:17:08.706][DEBUG] [Sequence Thread] Current event event[0] has remaining frames.  Returning current event.
[02/27/19 21:17:08.706][DEBUG] [Sequence Thread] Running pre event...
[02/27/19 21:17:08.724][DEBUG] [Sequence Thread] Current target has end time at 28/02/2019 06:30:00
[02/27/19 21:17:08.724][DEBUG] [Sequence Thread] End time of next frame is at 27/02/2019 21:17:38
[02/27/19 21:17:08.724][DEBUG] [Sequence Thread] Target is still before end time, continuing...
[02/27/19 21:17:08.724][DEBUG] [Sequence Thread] Running capture event...
[02/27/19 21:17:08.726][DEBUG] [Sequence Thread] ------------- Starting capture frame for event[0] -------------
[02/27/19 21:17:08.738][DEBUG] [Sequence Thread] Sending commands...
[02/27/19 21:17:08.738][DEBUG] [Sequence Thread] SetFlatBox: Frame Type is Light
[02/27/19 21:17:08.738][DEBUG] [Sequence Thread] EventMarker 2 - t:m81 (1); e:0; f:24; o:
[02/27/19 21:17:08.738][DEBUG] [Sequence Thread] Checking if Meridian Flip is needed
[02/27/19 21:17:08.738][DEBUG] [Sequence Thread] Telescope is on the West side of the mount
[02/27/19 21:17:08.738][DEBUG] [Sequence Thread] Meridian Flip not needed, Hour Angle < Degrees Past To Flip: -37.0672864306929 < 0
[02/27/19 21:17:08.738][DEBUG] [Sequence Thread] EventMarker 3 - t:m81 (1); e:0; f:24; o:
[02/27/19 21:17:08.738][DEBUG] [Sequence Thread] EventMarker 4 - t:m81 (1); e:0; f:24; o:
[02/27/19 21:17:08.738][DEBUG] [Sequence Thread] Setting filter position 1...
[02/27/19 21:17:08.738][DEBUG] [Sequence Thread] Filter position 1 is already set.  Skipping...
[02/27/19 21:17:08.738][DEBUG] [Sequence Thread] EventMarker 5 - t:m81 (1); e:0; f:24; o:
[02/27/19 21:17:08.738][DEBUG] [Sequence Thread] Checking for auto manual focus (pre)...
[02/27/19 21:17:08.738][DEBUG] [Sequence Thread] EventMarker 6 - t:m81 (1); e:0; f:24; o:
[02/27/19 21:17:08.747][DEBUG] [Sequence Thread] Running dither...
[02/27/19 21:17:08.759][DEBUG] [Sequence Thread] PHD2 dither request: 1...
[02/27/19 21:17:08.759][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:17:08.759][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:17:08.759][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:17:08.860][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:17:09.860][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:17:09.860][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:17:09.860][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:17:09.960][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:17:10.961][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:17:10.961][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:17:10.961][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:17:11.062][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:17:12.062][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:17:12.062][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:17:12.062][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:17:12.162][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:17:13.163][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:17:13.163][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:17:13.163][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:17:13.263][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:17:13.263][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:17:13.263][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:17:13.263][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:17:13.363][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:17:13.363][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "dither", "params": [1, false, {"pixels": 0.5, "time": 0, "timeout": 600}], "id": 1002}

[02/27/19 21:17:13.366][DEBUG] [Sequence Thread] EventMarker 1 - t:m81 (1); e:0; f:24; o:
[02/27/19 21:17:13.367][DEBUG] [Sequence Thread] Created base name for frame capture: m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_211713_frame25_-15C
[02/27/19 21:17:13.367][DEBUG] [Sequence Thread] Created directory for frame capture: C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\
[02/27/19 21:17:13.367][DEBUG] [Sequence Thread] EventMarker 7 - t:m81 (1); e:0; f:24; o:
[02/27/19 21:17:13.367][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:17:13.367][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:0; f:24; o:
[02/27/19 21:17:13.367][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:17:13.367][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:17:13.368][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:17:13.460][DEBUG] [PHD2 Listener Thread] Unknown object from PHD2: {"Event":"SettleBegin","Timestamp":1551302233.418,"Host":"JGL2_2","Inst":1}
[02/27/19 21:17:13.469][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:17:13.469][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:17:13.469][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:0; f:24; o:
[02/27/19 21:17:13.469][DEBUG] [Sequence Thread] {"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}
[02/27/19 21:17:13.469][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}

[02/27/19 21:17:13.469][DEBUG] [Sequence Thread] EventMarker 172 - t:m81 (1); e:0; f:24; o:
[02/27/19 21:17:13.469][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:17:13.469][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:17:13.469][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:17:13.561][DEBUG] [PHD2 Listener Thread] Error received from RPC: Cannot initiate guide while dither is in progress
[02/27/19 21:17:13.570][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:17:13.570][DEBUG] [Sequence Thread] EventMarker 173 - t:m81 (1); e:0; f:24; o:
[02/27/19 21:17:13.570][DEBUG] [Sequence Thread] User has elected to skip guider settling over time...
[02/27/19 21:17:13.570][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Attempting to settle the auto guider...
[02/27/19 21:17:13.570][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Attempting to settle the auto guider...)...
[02/27/19 21:17:13.570][DEBUG] [Sequence Thread] Waiting for Auto Guider distance to fall below 0.5
[02/27/19 21:17:13.570][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:17:13.570][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:17:13.577][DEBUG] [Sequence Thread] Distance is below 0.5, starting timer...
[02/27/19 21:17:14.078][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:17:14.078][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:17:14.084][DEBUG] [Sequence Thread] Distance stayed below 0.5 for 0 seconds, done settling...
[02/27/19 21:17:14.084][DEBUG] [Sequence Thread] Auto guider has settled...
[02/27/19 21:17:14.084][DEBUG] [Sequence Thread] EventMarker 8 - t:m81 (1); e:0; f:24; o:
[02/27/19 21:17:14.084][DEBUG] [Sequence Thread] EventMarker 9 - t:m81 (1); e:0; f:24; o:
[02/27/19 21:17:14.084][DEBUG] [Sequence Thread] EventMarker 10 - t:m81 (1); e:0; f:24; o:
[02/27/19 21:17:14.084][DEBUG] [Sequence Thread] Finished sending frame capture.  Entering wait mode...
[02/27/19 21:17:14.084][DEBUG] [Sequence Thread] EventMarker 11 - t:m81 (1); e:0; f:24; o:
[02/27/19 21:17:14.085][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE message received...
[02/27/19 21:17:14.085][DEBUG] [Sequence Thread] EventMarker 12 - t:m81 (1); e:0; f:24; o:
[02/27/19 21:17:14.085][DEBUG] [Camera Thread] SetAscomGain to 76
[02/27/19 21:17:14.086][DEBUG] [Camera Thread] Camera gain set to 76
[02/27/19 21:17:14.086][DEBUG] [Camera Thread] SetAscomNormalSpeed... 
[02/27/19 21:17:14.086][DEBUG] [Camera Thread] Cannot set readout speed, not supported by camera...
[02/27/19 21:17:14.091][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Starting integration of m81; Event 1; Frame 25 for 30s...
[02/27/19 21:17:14.091][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Starting integration of m81; Event 1; Frame 25 for 30s...)...
[02/27/19 21:17:14.091][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, TimedError): (2019-02-25) Failure while integrating m81; Event 1; Frame 25 for 30s. Image has not downloaded in alloted time period.
[02/27/19 21:17:14.091][DEBUG] [Sequence Thread] GNS: Sent timed event to GNS...
[02/27/19 21:17:14.092][DEBUG] [Sequence Thread] EventMarker 13 - t:m81 (1); e:0; f:24; o:
[02/27/19 21:17:16.238][DEBUG] [PHD2 Listener Thread] PHD2: Settle done received: GOOD
[02/27/19 21:17:37.698][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:17:37.720][DEBUG] [MF Update Thread] Performing serialize...
[02/27/19 21:17:44.270][DEBUG] [Sequence Thread] EventMarker 15 - t:m81 (1); e:0; f:24; o:
[02/27/19 21:17:44.273][DEBUG] [Sequence Thread] Waking from exposure time sleep period...
[02/27/19 21:17:44.273][DEBUG] [Sequence Thread] Checking to see if the CCD has a temp...
[02/27/19 21:17:44.273][DEBUG] [Sequence Thread] Saving the CCD temp...
[02/27/19 21:17:44.280][DEBUG] [Sequence Thread] Entering super dangerous loop to await image completion...
[02/27/19 21:17:44.283][DEBUG] [Sequence Thread] EventMarker 16 - t:m81 (1); e:0; f:24; o:
[02/27/19 21:17:45.222][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE complete...
[02/27/19 21:17:45.287][DEBUG] [Sequence Thread] EventMarker 17 - t:m81 (1); e:0; f:24; o:
[02/27/19 21:17:45.287][DEBUG] [Sequence Thread] Image reported as complete.  Continuing...
[02/27/19 21:17:45.287][DEBUG] [Sequence Thread] Collecting FITs headers...
[02/27/19 21:17:45.288][DEBUG] [Sequence Thread] ASCOM Camera: Could not get last exposure start time.  Reported as (unknown)
[02/27/19 21:17:45.288][DEBUG] [Sequence Thread] DATE-LOC time provided by SGPro (failed to retrieve valid entry from camera)...
[02/27/19 21:17:45.289][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info for last solve...
[02/27/19 21:17:45.289][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info from UI...
[02/27/19 21:17:45.289][DEBUG] [Sequence Thread] Clearing timed monitoring events...
[02/27/19 21:17:45.293][DEBUG] [Sequence Thread] Created full file name (file does not exist): C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_211713_frame25_-15C.fit
[02/27/19 21:17:45.293][DEBUG] [Sequence Thread] SaveFileAscom: Start...
[02/27/19 21:17:45.293][DEBUG] [Sequence Thread] SaveFileAscom: Checking image data...
[02/27/19 21:17:45.293][DEBUG] [Sequence Thread] SaveFileAscom: Create normal preview bitmap...
[02/27/19 21:17:45.298][DEBUG] [Sequence Thread] SaveFileAscom: Locking preview bits...
[02/27/19 21:17:45.298][DEBUG] [Sequence Thread] SaveFileAscom: Validating file name...
[02/27/19 21:17:45.298][DEBUG] [Sequence Thread] SaveFileAscom: Starting byte traversal...
[02/27/19 21:17:45.474][DEBUG] [Sequence Thread] SaveFileAscom: Unlocking preview bits...
[02/27/19 21:17:45.474][DEBUG] [Sequence Thread] SaveFileAscom: Saving preview bitmap to disk...
[02/27/19 21:17:45.474][DEBUG] [Sequence Thread] SaveFileBmp16: Locking bitmap for disk write...
[02/27/19 21:17:45.474][DEBUG] [Sequence Thread] SaveFileBmp16: Opening file stream...
[02/27/19 21:17:45.475][DEBUG] [Sequence Thread] SaveFileBmp16: Writing FITS headers...
[02/27/19 21:17:45.475][DEBUG] [Sequence Thread] SaveFileBmp16: Traversing and persisting bitmap data...
[02/27/19 21:17:45.654][DEBUG] [Sequence Thread] SaveFileBmp16: FITS block fill...
[02/27/19 21:17:45.654][DEBUG] [Sequence Thread] SaveFileBmp16: Unlocking bitmap...
[02/27/19 21:17:45.654][DEBUG] [Sequence Thread] SaveFileBmp16: Closing file stream
[02/27/19 21:17:45.657][DEBUG] [Sequence Thread] SaveFileAscom: Displaying image preview in UI...
[02/27/19 21:17:45.657][DEBUG] [Sequence Thread] Internal Interface: Set Preview...
[02/27/19 21:17:45.657][DEBUG] [Sequence Thread] Display image preview using asynch task...
[02/27/19 21:17:46.843][DEBUG] [Sequence Thread] SaveFileAscom: Done
[02/27/19 21:17:46.843][DEBUG] [Sequence Thread] =========== Save file took 1553 ms
[02/27/19 21:17:46.843][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_211713_frame25_-15C.fit" saved.  HFR = 2.61.
[02/27/19 21:17:46.843][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_211713_frame25_-15C.fit" saved.  HFR = 2.61.)...
[02/27/19 21:17:46.851][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:17:46.851][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:0; f:24; o:
[02/27/19 21:17:46.851][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:17:46.851][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:17:46.851][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:17:46.952][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:17:46.952][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:17:46.952][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:0; f:24; o:
[02/27/19 21:17:46.954][DEBUG] [Sequence Thread] EventMarker 18 - t:m81 (1); e:0; f:24; o:
[02/27/19 21:17:46.958][DEBUG] [Sequence Thread] EventMarker 19 - t:m81 (1); e:0; f:25; o:
[02/27/19 21:17:46.958][DEBUG] [Sequence Thread] EventMarker 20 - t:m81 (1); e:0; f:25; o:
[02/27/19 21:17:46.958][DEBUG] [Sequence Thread] Running post event...
[02/27/19 21:17:46.958][DEBUG] [Sequence Thread] EventMarker 21 - t:m81 (1); e:0; f:25; o:
[02/27/19 21:17:46.972][DEBUG] [Sequence Thread] Incremented numComplete (25) for event[0]...
[02/27/19 21:17:46.973][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:17:46.973][DEBUG] [Sequence Thread] Current event[0] frame count: 25/120...
[02/27/19 21:17:46.973][DEBUG] [Sequence Thread] Current event event[0] has remaining frames.  Returning current event.
[02/27/19 21:17:46.973][DEBUG] [Sequence Thread] Checking for auto manual focus (post)...
[02/27/19 21:17:46.975][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:17:46.989][DEBUG] [Sequence Thread] Attempting to move to next event...
[02/27/19 21:17:46.989][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:17:46.989][DEBUG] [Sequence Thread] Current event[0] frame count: 25/120...
[02/27/19 21:17:46.989][DEBUG] [Sequence Thread] Current event event[0] has remaining frames.  Returning current event.
[02/27/19 21:17:46.989][DEBUG] [Sequence Thread] Running pre event...
[02/27/19 21:17:47.008][DEBUG] [Sequence Thread] Current target has end time at 28/02/2019 06:30:00
[02/27/19 21:17:47.008][DEBUG] [Sequence Thread] End time of next frame is at 27/02/2019 21:18:17
[02/27/19 21:17:47.008][DEBUG] [Sequence Thread] Target is still before end time, continuing...
[02/27/19 21:17:47.008][DEBUG] [Sequence Thread] Running capture event...
[02/27/19 21:17:47.011][DEBUG] [Sequence Thread] ------------- Starting capture frame for event[0] -------------
[02/27/19 21:17:47.017][DEBUG] [Sequence Thread] Sending commands...
[02/27/19 21:17:47.017][DEBUG] [Sequence Thread] SetFlatBox: Frame Type is Light
[02/27/19 21:17:47.017][DEBUG] [Sequence Thread] EventMarker 2 - t:m81 (1); e:0; f:25; o:
[02/27/19 21:17:47.017][DEBUG] [Sequence Thread] Checking if Meridian Flip is needed
[02/27/19 21:17:47.017][DEBUG] [Sequence Thread] Telescope is on the West side of the mount
[02/27/19 21:17:47.017][DEBUG] [Sequence Thread] Meridian Flip not needed, Hour Angle < Degrees Past To Flip: -36.9069779448621 < 0
[02/27/19 21:17:47.017][DEBUG] [Sequence Thread] EventMarker 3 - t:m81 (1); e:0; f:25; o:
[02/27/19 21:17:47.017][DEBUG] [Sequence Thread] EventMarker 4 - t:m81 (1); e:0; f:25; o:
[02/27/19 21:17:47.017][DEBUG] [Sequence Thread] Setting filter position 1...
[02/27/19 21:17:47.017][DEBUG] [Sequence Thread] Filter position 1 is already set.  Skipping...
[02/27/19 21:17:47.017][DEBUG] [Sequence Thread] EventMarker 5 - t:m81 (1); e:0; f:25; o:
[02/27/19 21:17:47.017][DEBUG] [Sequence Thread] Checking for auto manual focus (pre)...
[02/27/19 21:17:47.017][DEBUG] [Sequence Thread] EventMarker 6 - t:m81 (1); e:0; f:25; o:
[02/27/19 21:17:47.025][DEBUG] [Sequence Thread] Autoguider will not dither this frame. Total frames is not a modulus of 5
[02/27/19 21:17:47.025][DEBUG] [Sequence Thread] EventMarker 1 - t:m81 (1); e:0; f:25; o:
[02/27/19 21:17:47.026][DEBUG] [Sequence Thread] Created base name for frame capture: m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_211747_frame26_-15C
[02/27/19 21:17:47.026][DEBUG] [Sequence Thread] Created directory for frame capture: C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\
[02/27/19 21:17:47.026][DEBUG] [Sequence Thread] EventMarker 7 - t:m81 (1); e:0; f:25; o:
[02/27/19 21:17:47.026][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:17:47.026][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:0; f:25; o:
[02/27/19 21:17:47.026][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:17:47.026][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:17:47.026][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:17:47.126][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:17:47.126][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:17:47.126][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:0; f:25; o:
[02/27/19 21:17:47.127][DEBUG] [Sequence Thread] {"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}
[02/27/19 21:17:47.127][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}

[02/27/19 21:17:47.127][DEBUG] [Sequence Thread] EventMarker 172 - t:m81 (1); e:0; f:25; o:
[02/27/19 21:17:47.127][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:17:47.127][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:17:47.127][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:17:47.199][DEBUG] [PHD2 Listener Thread] Unknown object from PHD2: {"Event":"SettleBegin","Timestamp":1551302267.149,"Host":"JGL2_2","Inst":1}
[02/27/19 21:17:47.228][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:17:47.228][DEBUG] [Sequence Thread] EventMarker 173 - t:m81 (1); e:0; f:25; o:
[02/27/19 21:17:47.228][DEBUG] [Sequence Thread] User has elected to skip guider settling over time...
[02/27/19 21:17:47.228][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Attempting to settle the auto guider...
[02/27/19 21:17:47.228][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Attempting to settle the auto guider...)...
[02/27/19 21:17:47.228][DEBUG] [Sequence Thread] Waiting for Auto Guider distance to fall below 0.5
[02/27/19 21:17:47.228][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:17:47.228][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:17:47.238][DEBUG] [Sequence Thread] Distance is below 0.5, starting timer...
[02/27/19 21:17:47.739][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:17:47.739][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:17:47.753][DEBUG] [Sequence Thread] Distance stayed below 0.5 for 0 seconds, done settling...
[02/27/19 21:17:47.753][DEBUG] [Sequence Thread] Auto guider has settled...
[02/27/19 21:17:47.753][DEBUG] [Sequence Thread] EventMarker 8 - t:m81 (1); e:0; f:25; o:
[02/27/19 21:17:47.753][DEBUG] [Sequence Thread] EventMarker 9 - t:m81 (1); e:0; f:25; o:
[02/27/19 21:17:47.753][DEBUG] [Sequence Thread] EventMarker 10 - t:m81 (1); e:0; f:25; o:
[02/27/19 21:17:47.753][DEBUG] [Sequence Thread] Finished sending frame capture.  Entering wait mode...
[02/27/19 21:17:47.753][DEBUG] [Sequence Thread] EventMarker 11 - t:m81 (1); e:0; f:25; o:
[02/27/19 21:17:47.754][DEBUG] [Sequence Thread] EventMarker 12 - t:m81 (1); e:0; f:25; o:
[02/27/19 21:17:47.764][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE message received...
[02/27/19 21:17:47.764][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Starting integration of m81; Event 1; Frame 26 for 30s...
[02/27/19 21:17:47.764][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Starting integration of m81; Event 1; Frame 26 for 30s...)...
[02/27/19 21:17:47.765][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, TimedError): (2019-02-25) Failure while integrating m81; Event 1; Frame 26 for 30s. Image has not downloaded in alloted time period.
[02/27/19 21:17:47.765][DEBUG] [Sequence Thread] GNS: Sent timed event to GNS...
[02/27/19 21:17:47.766][DEBUG] [Camera Thread] SetAscomGain to 76
[02/27/19 21:17:47.766][DEBUG] [Sequence Thread] EventMarker 13 - t:m81 (1); e:0; f:25; o:
[02/27/19 21:17:47.767][DEBUG] [Camera Thread] Camera gain set to 76
[02/27/19 21:17:47.767][DEBUG] [Camera Thread] SetAscomNormalSpeed... 
[02/27/19 21:17:47.767][DEBUG] [Camera Thread] Cannot set readout speed, not supported by camera...
[02/27/19 21:17:48.612][DEBUG] [PHD2 Listener Thread] PHD2: Settle done received: GOOD
[02/27/19 21:18:17.961][DEBUG] [Sequence Thread] EventMarker 15 - t:m81 (1); e:0; f:25; o:
[02/27/19 21:18:17.966][DEBUG] [Sequence Thread] Waking from exposure time sleep period...
[02/27/19 21:18:17.966][DEBUG] [Sequence Thread] Checking to see if the CCD has a temp...
[02/27/19 21:18:17.966][DEBUG] [Sequence Thread] Saving the CCD temp...
[02/27/19 21:18:17.979][DEBUG] [Sequence Thread] Entering super dangerous loop to await image completion...
[02/27/19 21:18:17.982][DEBUG] [Sequence Thread] EventMarker 16 - t:m81 (1); e:0; f:25; o:
[02/27/19 21:18:18.903][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE complete...
[02/27/19 21:18:18.987][DEBUG] [Sequence Thread] EventMarker 17 - t:m81 (1); e:0; f:25; o:
[02/27/19 21:18:18.993][DEBUG] [Sequence Thread] Image reported as complete.  Continuing...
[02/27/19 21:18:18.993][DEBUG] [Sequence Thread] Collecting FITs headers...
[02/27/19 21:18:18.994][DEBUG] [Sequence Thread] ASCOM Camera: Could not get last exposure start time.  Reported as (unknown)
[02/27/19 21:18:18.994][DEBUG] [Sequence Thread] DATE-LOC time provided by SGPro (failed to retrieve valid entry from camera)...
[02/27/19 21:18:18.996][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info for last solve...
[02/27/19 21:18:18.996][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info from UI...
[02/27/19 21:18:18.996][DEBUG] [Sequence Thread] Clearing timed monitoring events...
[02/27/19 21:18:19.003][DEBUG] [Sequence Thread] Created full file name (file does not exist): C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_211747_frame26_-15C.fit
[02/27/19 21:18:19.003][DEBUG] [Sequence Thread] SaveFileAscom: Start...
[02/27/19 21:18:19.003][DEBUG] [Sequence Thread] SaveFileAscom: Checking image data...
[02/27/19 21:18:19.003][DEBUG] [Sequence Thread] SaveFileAscom: Create normal preview bitmap...
[02/27/19 21:18:19.011][DEBUG] [Sequence Thread] SaveFileAscom: Locking preview bits...
[02/27/19 21:18:19.011][DEBUG] [Sequence Thread] SaveFileAscom: Validating file name...
[02/27/19 21:18:19.011][DEBUG] [Sequence Thread] SaveFileAscom: Starting byte traversal...
[02/27/19 21:18:19.177][DEBUG] [Sequence Thread] SaveFileAscom: Unlocking preview bits...
[02/27/19 21:18:19.177][DEBUG] [Sequence Thread] SaveFileAscom: Saving preview bitmap to disk...
[02/27/19 21:18:19.177][DEBUG] [Sequence Thread] SaveFileBmp16: Locking bitmap for disk write...
[02/27/19 21:18:19.177][DEBUG] [Sequence Thread] SaveFileBmp16: Opening file stream...
[02/27/19 21:18:19.177][DEBUG] [Sequence Thread] SaveFileBmp16: Writing FITS headers...
[02/27/19 21:18:19.178][DEBUG] [Sequence Thread] SaveFileBmp16: Traversing and persisting bitmap data...
[02/27/19 21:18:19.338][DEBUG] [Sequence Thread] SaveFileBmp16: FITS block fill...
[02/27/19 21:18:19.338][DEBUG] [Sequence Thread] SaveFileBmp16: Unlocking bitmap...
[02/27/19 21:18:19.338][DEBUG] [Sequence Thread] SaveFileBmp16: Closing file stream
[02/27/19 21:18:19.342][DEBUG] [Sequence Thread] SaveFileAscom: Displaying image preview in UI...
[02/27/19 21:18:19.342][DEBUG] [Sequence Thread] Internal Interface: Set Preview...
[02/27/19 21:18:19.342][DEBUG] [Sequence Thread] Display image preview using asynch task...
[02/27/19 21:18:19.653][DEBUG] [Main Thread] --> Find stars (normal)
[02/27/19 21:18:20.092][DEBUG] [Main Thread] AF frame was too large... downsample = 0.5...
[02/27/19 21:18:21.812][DEBUG] [Main Thread] Star detection using min star size of 3px...
[02/27/19 21:18:21.812][DEBUG] [Main Thread] Star detection using max star size of 60px...
[02/27/19 21:18:21.855][DEBUG] [Main Thread] Find stars took: 2201 ms...
[02/27/19 21:18:21.855][DEBUG] [Main Thread] Star list contains 185 stars...
[02/27/19 21:18:21.855][DEBUG] [Main Thread] Calculating HFR with sample size: 6
[02/27/19 21:18:22.585][DEBUG] [Sequence Thread] SaveFileAscom: Done
[02/27/19 21:18:22.585][DEBUG] [Sequence Thread] =========== Save file took 3588 ms
[02/27/19 21:18:22.585][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_211747_frame26_-15C.fit" saved.  HFR = 2.55.
[02/27/19 21:18:22.585][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_211747_frame26_-15C.fit" saved.  HFR = 2.55.)...
[02/27/19 21:18:22.591][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:18:22.591][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:0; f:25; o:
[02/27/19 21:18:22.591][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:18:22.591][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:18:22.591][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:18:22.692][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:18:22.692][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:18:22.692][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:0; f:25; o:
[02/27/19 21:18:22.692][DEBUG] [Sequence Thread] EventMarker 18 - t:m81 (1); e:0; f:25; o:
[02/27/19 21:18:22.726][DEBUG] [Sequence Thread] EventMarker 19 - t:m81 (1); e:0; f:26; o:
[02/27/19 21:18:22.726][DEBUG] [Sequence Thread] EventMarker 20 - t:m81 (1); e:0; f:26; o:
[02/27/19 21:18:22.726][DEBUG] [Sequence Thread] Running post event...
[02/27/19 21:18:22.726][DEBUG] [Sequence Thread] EventMarker 21 - t:m81 (1); e:0; f:26; o:
[02/27/19 21:18:22.747][DEBUG] [Sequence Thread] Incremented numComplete (26) for event[0]...
[02/27/19 21:18:22.748][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:18:22.748][DEBUG] [Sequence Thread] Current event[0] frame count: 26/120...
[02/27/19 21:18:22.748][DEBUG] [Sequence Thread] Current event event[0] has remaining frames.  Returning current event.
[02/27/19 21:18:22.748][DEBUG] [Sequence Thread] Checking for auto manual focus (post)...
[02/27/19 21:18:22.749][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:18:22.760][DEBUG] [Sequence Thread] Attempting to move to next event...
[02/27/19 21:18:22.760][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:18:22.760][DEBUG] [Sequence Thread] Current event[0] frame count: 26/120...
[02/27/19 21:18:22.760][DEBUG] [Sequence Thread] Current event event[0] has remaining frames.  Returning current event.
[02/27/19 21:18:22.760][DEBUG] [Sequence Thread] Running pre event...
[02/27/19 21:18:22.779][DEBUG] [Sequence Thread] Current target has end time at 28/02/2019 06:30:00
[02/27/19 21:18:22.779][DEBUG] [Sequence Thread] End time of next frame is at 27/02/2019 21:18:52
[02/27/19 21:18:22.779][DEBUG] [Sequence Thread] Target is still before end time, continuing...
[02/27/19 21:18:22.779][DEBUG] [Sequence Thread] Running capture event...
[02/27/19 21:18:22.781][DEBUG] [Sequence Thread] ------------- Starting capture frame for event[0] -------------
[02/27/19 21:18:22.792][DEBUG] [Sequence Thread] Sending commands...
[02/27/19 21:18:22.792][DEBUG] [Sequence Thread] SetFlatBox: Frame Type is Light
[02/27/19 21:18:22.792][DEBUG] [Sequence Thread] EventMarker 2 - t:m81 (1); e:0; f:26; o:
[02/27/19 21:18:22.792][DEBUG] [Sequence Thread] Checking if Meridian Flip is needed
[02/27/19 21:18:22.792][DEBUG] [Sequence Thread] Telescope is on the West side of the mount
[02/27/19 21:18:22.792][DEBUG] [Sequence Thread] Meridian Flip not needed, Hour Angle < Degrees Past To Flip: -36.7571505636361 < 0
[02/27/19 21:18:22.792][DEBUG] [Sequence Thread] EventMarker 3 - t:m81 (1); e:0; f:26; o:
[02/27/19 21:18:22.792][DEBUG] [Sequence Thread] EventMarker 4 - t:m81 (1); e:0; f:26; o:
[02/27/19 21:18:22.792][DEBUG] [Sequence Thread] Setting filter position 1...
[02/27/19 21:18:22.792][DEBUG] [Sequence Thread] Filter position 1 is already set.  Skipping...
[02/27/19 21:18:22.792][DEBUG] [Sequence Thread] EventMarker 5 - t:m81 (1); e:0; f:26; o:
[02/27/19 21:18:22.792][DEBUG] [Sequence Thread] Checking for auto manual focus (pre)...
[02/27/19 21:18:22.792][DEBUG] [Sequence Thread] EventMarker 6 - t:m81 (1); e:0; f:26; o:
[02/27/19 21:18:22.795][DEBUG] [Sequence Thread] Autoguider will not dither this frame. Total frames is not a modulus of 5
[02/27/19 21:18:22.795][DEBUG] [Sequence Thread] EventMarker 1 - t:m81 (1); e:0; f:26; o:
[02/27/19 21:18:22.796][DEBUG] [Sequence Thread] Created base name for frame capture: m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_211822_frame27_-15C
[02/27/19 21:18:22.796][DEBUG] [Sequence Thread] Created directory for frame capture: C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\
[02/27/19 21:18:22.796][DEBUG] [Sequence Thread] EventMarker 7 - t:m81 (1); e:0; f:26; o:
[02/27/19 21:18:22.796][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:18:22.796][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:0; f:26; o:
[02/27/19 21:18:22.796][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:18:22.796][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:18:22.796][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:18:22.896][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:18:22.896][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:18:22.896][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:0; f:26; o:
[02/27/19 21:18:22.897][DEBUG] [Sequence Thread] {"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}
[02/27/19 21:18:22.897][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}

[02/27/19 21:18:22.897][DEBUG] [Sequence Thread] EventMarker 172 - t:m81 (1); e:0; f:26; o:
[02/27/19 21:18:22.897][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:18:22.897][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:18:22.897][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:18:22.980][DEBUG] [PHD2 Listener Thread] Unknown object from PHD2: {"Event":"SettleBegin","Timestamp":1551302302.930,"Host":"JGL2_2","Inst":1}
[02/27/19 21:18:22.997][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:18:22.997][DEBUG] [Sequence Thread] EventMarker 173 - t:m81 (1); e:0; f:26; o:
[02/27/19 21:18:22.998][DEBUG] [Sequence Thread] User has elected to skip guider settling over time...
[02/27/19 21:18:22.998][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Attempting to settle the auto guider...
[02/27/19 21:18:22.998][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Attempting to settle the auto guider...)...
[02/27/19 21:18:22.998][DEBUG] [Sequence Thread] Waiting for Auto Guider distance to fall below 0.5
[02/27/19 21:18:22.998][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:18:22.998][DEBUG] [Sequence Thread] PHD2 distance request returned 0.2...
[02/27/19 21:18:23.009][DEBUG] [Sequence Thread] Distance is below 0.5, starting timer...
[02/27/19 21:18:23.510][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:18:23.510][DEBUG] [Sequence Thread] PHD2 distance request returned 0.2...
[02/27/19 21:18:23.756][DEBUG] [Sequence Thread] Distance stayed below 0.5 for 0 seconds, done settling...
[02/27/19 21:18:23.758][DEBUG] [Sequence Thread] Auto guider has settled...
[02/27/19 21:18:23.758][DEBUG] [Sequence Thread] EventMarker 8 - t:m81 (1); e:0; f:26; o:
[02/27/19 21:18:23.758][DEBUG] [Sequence Thread] EventMarker 9 - t:m81 (1); e:0; f:26; o:
[02/27/19 21:18:23.758][DEBUG] [Sequence Thread] EventMarker 10 - t:m81 (1); e:0; f:26; o:
[02/27/19 21:18:23.758][DEBUG] [Sequence Thread] Finished sending frame capture.  Entering wait mode...
[02/27/19 21:18:23.758][DEBUG] [Sequence Thread] EventMarker 11 - t:m81 (1); e:0; f:26; o:
[02/27/19 21:18:23.759][DEBUG] [Sequence Thread] EventMarker 12 - t:m81 (1); e:0; f:26; o:
[02/27/19 21:18:23.762][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Starting integration of m81; Event 1; Frame 27 for 30s...
[02/27/19 21:18:23.762][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Starting integration of m81; Event 1; Frame 27 for 30s...)...
[02/27/19 21:18:23.762][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, TimedError): (2019-02-25) Failure while integrating m81; Event 1; Frame 27 for 30s. Image has not downloaded in alloted time period.
[02/27/19 21:18:23.762][DEBUG] [Sequence Thread] GNS: Sent timed event to GNS...
[02/27/19 21:18:23.765][DEBUG] [Sequence Thread] EventMarker 13 - t:m81 (1); e:0; f:26; o:
[02/27/19 21:18:23.767][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE message received...
[02/27/19 21:18:23.768][DEBUG] [Camera Thread] SetAscomGain to 76
[02/27/19 21:18:23.769][DEBUG] [Camera Thread] Camera gain set to 76
[02/27/19 21:18:23.769][DEBUG] [Camera Thread] SetAscomNormalSpeed... 
[02/27/19 21:18:23.769][DEBUG] [Camera Thread] Cannot set readout speed, not supported by camera...
[02/27/19 21:18:24.242][DEBUG] [PHD2 Listener Thread] PHD2: Settle done received: GOOD
[02/27/19 21:18:54.034][DEBUG] [Sequence Thread] EventMarker 15 - t:m81 (1); e:0; f:26; o:
[02/27/19 21:18:54.038][DEBUG] [Sequence Thread] Waking from exposure time sleep period...
[02/27/19 21:18:54.039][DEBUG] [Sequence Thread] Checking to see if the CCD has a temp...
[02/27/19 21:18:54.039][DEBUG] [Sequence Thread] Saving the CCD temp...
[02/27/19 21:18:54.046][DEBUG] [Sequence Thread] Entering super dangerous loop to await image completion...
[02/27/19 21:18:54.048][DEBUG] [Sequence Thread] EventMarker 16 - t:m81 (1); e:0; f:26; o:
[02/27/19 21:18:54.904][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE complete...
[02/27/19 21:18:55.052][DEBUG] [Sequence Thread] EventMarker 17 - t:m81 (1); e:0; f:26; o:
[02/27/19 21:18:55.052][DEBUG] [Sequence Thread] Image reported as complete.  Continuing...
[02/27/19 21:18:55.052][DEBUG] [Sequence Thread] Collecting FITs headers...
[02/27/19 21:18:55.053][DEBUG] [Sequence Thread] ASCOM Camera: Could not get last exposure start time.  Reported as (unknown)
[02/27/19 21:18:55.053][DEBUG] [Sequence Thread] DATE-LOC time provided by SGPro (failed to retrieve valid entry from camera)...
[02/27/19 21:18:55.054][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info for last solve...
[02/27/19 21:18:55.054][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info from UI...
[02/27/19 21:18:55.055][DEBUG] [Sequence Thread] Clearing timed monitoring events...
[02/27/19 21:18:55.060][DEBUG] [Sequence Thread] Created full file name (file does not exist): C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_211822_frame27_-15C.fit
[02/27/19 21:18:55.060][DEBUG] [Sequence Thread] SaveFileAscom: Start...
[02/27/19 21:18:55.060][DEBUG] [Sequence Thread] SaveFileAscom: Checking image data...
[02/27/19 21:18:55.060][DEBUG] [Sequence Thread] SaveFileAscom: Create normal preview bitmap...
[02/27/19 21:18:55.065][DEBUG] [Sequence Thread] SaveFileAscom: Locking preview bits...
[02/27/19 21:18:55.066][DEBUG] [Sequence Thread] SaveFileAscom: Validating file name...
[02/27/19 21:18:55.066][DEBUG] [Sequence Thread] SaveFileAscom: Starting byte traversal...
[02/27/19 21:18:55.225][DEBUG] [Sequence Thread] SaveFileAscom: Unlocking preview bits...
[02/27/19 21:18:55.225][DEBUG] [Sequence Thread] SaveFileAscom: Saving preview bitmap to disk...
[02/27/19 21:18:55.225][DEBUG] [Sequence Thread] SaveFileBmp16: Locking bitmap for disk write...
[02/27/19 21:18:55.225][DEBUG] [Sequence Thread] SaveFileBmp16: Opening file stream...
[02/27/19 21:18:55.225][DEBUG] [Sequence Thread] SaveFileBmp16: Writing FITS headers...
[02/27/19 21:18:55.226][DEBUG] [Sequence Thread] SaveFileBmp16: Traversing and persisting bitmap data...
[02/27/19 21:18:55.391][DEBUG] [Sequence Thread] SaveFileBmp16: FITS block fill...
[02/27/19 21:18:55.391][DEBUG] [Sequence Thread] SaveFileBmp16: Unlocking bitmap...
[02/27/19 21:18:55.391][DEBUG] [Sequence Thread] SaveFileBmp16: Closing file stream
[02/27/19 21:18:55.396][DEBUG] [Sequence Thread] SaveFileAscom: Displaying image preview in UI...
[02/27/19 21:18:55.396][DEBUG] [Sequence Thread] Internal Interface: Set Preview...
[02/27/19 21:18:55.396][DEBUG] [Sequence Thread] Display image preview using asynch task...
[02/27/19 21:18:55.681][DEBUG] [Main Thread] --> Find stars (normal)
[02/27/19 21:18:56.152][DEBUG] [Main Thread] AF frame was too large... downsample = 0.5...
[02/27/19 21:18:57.939][DEBUG] [Main Thread] Star detection using min star size of 3px...
[02/27/19 21:18:57.939][DEBUG] [Main Thread] Star detection using max star size of 60px...
[02/27/19 21:18:57.985][DEBUG] [Main Thread] Find stars took: 2304 ms...
[02/27/19 21:18:57.985][DEBUG] [Main Thread] Star list contains 184 stars...
[02/27/19 21:18:57.985][DEBUG] [Main Thread] Calculating HFR with sample size: 6
[02/27/19 21:18:58.598][DEBUG] [Sequence Thread] SaveFileAscom: Done
[02/27/19 21:18:58.598][DEBUG] [Sequence Thread] =========== Save file took 3542 ms
[02/27/19 21:18:58.598][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_211822_frame27_-15C.fit" saved.  HFR = 2.55.
[02/27/19 21:18:58.598][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_211822_frame27_-15C.fit" saved.  HFR = 2.55.)...
[02/27/19 21:18:58.601][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:18:58.602][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:0; f:26; o:
[02/27/19 21:18:58.602][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:18:58.602][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:18:58.602][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:18:58.703][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:18:58.703][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:18:58.703][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:0; f:26; o:
[02/27/19 21:18:58.703][DEBUG] [Sequence Thread] EventMarker 18 - t:m81 (1); e:0; f:26; o:
[02/27/19 21:18:58.709][DEBUG] [Sequence Thread] EventMarker 19 - t:m81 (1); e:0; f:27; o:
[02/27/19 21:18:58.709][DEBUG] [Sequence Thread] EventMarker 20 - t:m81 (1); e:0; f:27; o:
[02/27/19 21:18:58.709][DEBUG] [Sequence Thread] Running post event...
[02/27/19 21:18:58.709][DEBUG] [Sequence Thread] EventMarker 21 - t:m81 (1); e:0; f:27; o:
[02/27/19 21:18:58.713][DEBUG] [Sequence Thread] Incremented numComplete (27) for event[0]...
[02/27/19 21:18:58.718][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:18:58.718][DEBUG] [Sequence Thread] Current event[0] frame count: 27/120...
[02/27/19 21:18:58.718][DEBUG] [Sequence Thread] Current event event[0] has remaining frames.  Returning current event.
[02/27/19 21:18:58.718][DEBUG] [Sequence Thread] Checking for auto manual focus (post)...
[02/27/19 21:18:58.718][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:18:58.730][DEBUG] [Sequence Thread] Attempting to move to next event...
[02/27/19 21:18:58.730][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:18:58.730][DEBUG] [Sequence Thread] Current event[0] frame count: 27/120...
[02/27/19 21:18:58.730][DEBUG] [Sequence Thread] Current event event[0] has remaining frames.  Returning current event.
[02/27/19 21:18:58.730][DEBUG] [Sequence Thread] Running pre event...
[02/27/19 21:18:58.742][DEBUG] [Sequence Thread] Current target has end time at 28/02/2019 06:30:00
[02/27/19 21:18:58.742][DEBUG] [Sequence Thread] End time of next frame is at 27/02/2019 21:19:28
[02/27/19 21:18:58.742][DEBUG] [Sequence Thread] Target is still before end time, continuing...
[02/27/19 21:18:58.742][DEBUG] [Sequence Thread] Running capture event...
[02/27/19 21:18:58.744][DEBUG] [Sequence Thread] ------------- Starting capture frame for event[0] -------------
[02/27/19 21:18:58.750][DEBUG] [Sequence Thread] Sending commands...
[02/27/19 21:18:58.750][DEBUG] [Sequence Thread] SetFlatBox: Frame Type is Light
[02/27/19 21:18:58.750][DEBUG] [Sequence Thread] EventMarker 2 - t:m81 (1); e:0; f:27; o:
[02/27/19 21:18:58.750][DEBUG] [Sequence Thread] Checking if Meridian Flip is needed
[02/27/19 21:18:58.750][DEBUG] [Sequence Thread] Telescope is on the West side of the mount
[02/27/19 21:18:58.750][DEBUG] [Sequence Thread] Meridian Flip not needed, Hour Angle < Degrees Past To Flip: -36.6024367967745 < 0
[02/27/19 21:18:58.750][DEBUG] [Sequence Thread] EventMarker 3 - t:m81 (1); e:0; f:27; o:
[02/27/19 21:18:58.750][DEBUG] [Sequence Thread] EventMarker 4 - t:m81 (1); e:0; f:27; o:
[02/27/19 21:18:58.750][DEBUG] [Sequence Thread] Setting filter position 1...
[02/27/19 21:18:58.750][DEBUG] [Sequence Thread] Filter position 1 is already set.  Skipping...
[02/27/19 21:18:58.750][DEBUG] [Sequence Thread] EventMarker 5 - t:m81 (1); e:0; f:27; o:
[02/27/19 21:18:58.750][DEBUG] [Sequence Thread] Checking for auto manual focus (pre)...
[02/27/19 21:18:58.750][DEBUG] [Sequence Thread] EventMarker 6 - t:m81 (1); e:0; f:27; o:
[02/27/19 21:18:58.754][DEBUG] [Sequence Thread] Autoguider will not dither this frame. Total frames is not a modulus of 5
[02/27/19 21:18:58.754][DEBUG] [Sequence Thread] EventMarker 1 - t:m81 (1); e:0; f:27; o:
[02/27/19 21:18:58.754][DEBUG] [Sequence Thread] Created base name for frame capture: m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_211858_frame28_-15C
[02/27/19 21:18:58.754][DEBUG] [Sequence Thread] Created directory for frame capture: C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\
[02/27/19 21:18:58.754][DEBUG] [Sequence Thread] EventMarker 7 - t:m81 (1); e:0; f:27; o:
[02/27/19 21:18:58.754][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:18:58.754][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:0; f:27; o:
[02/27/19 21:18:58.754][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:18:58.754][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:18:58.754][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:18:58.855][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:18:58.855][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:18:58.855][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:0; f:27; o:
[02/27/19 21:18:58.855][DEBUG] [Sequence Thread] {"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}
[02/27/19 21:18:58.855][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}

[02/27/19 21:18:58.855][DEBUG] [Sequence Thread] EventMarker 172 - t:m81 (1); e:0; f:27; o:
[02/27/19 21:18:58.855][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:18:58.855][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:18:58.855][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:18:58.930][DEBUG] [PHD2 Listener Thread] Unknown object from PHD2: {"Event":"SettleBegin","Timestamp":1551302338.880,"Host":"JGL2_2","Inst":1}
[02/27/19 21:18:58.956][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:18:58.956][DEBUG] [Sequence Thread] EventMarker 173 - t:m81 (1); e:0; f:27; o:
[02/27/19 21:18:58.956][DEBUG] [Sequence Thread] User has elected to skip guider settling over time...
[02/27/19 21:18:58.956][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Attempting to settle the auto guider...
[02/27/19 21:18:58.956][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Attempting to settle the auto guider...)...
[02/27/19 21:18:58.956][DEBUG] [Sequence Thread] Waiting for Auto Guider distance to fall below 0.5
[02/27/19 21:18:58.956][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:18:58.956][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:18:58.967][DEBUG] [Sequence Thread] Distance is below 0.5, starting timer...
[02/27/19 21:18:59.468][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:18:59.468][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:18:59.822][DEBUG] [Sequence Thread] Distance stayed below 0.5 for 0 seconds, done settling...
[02/27/19 21:18:59.823][DEBUG] [Sequence Thread] Auto guider has settled...
[02/27/19 21:18:59.823][DEBUG] [Sequence Thread] EventMarker 8 - t:m81 (1); e:0; f:27; o:
[02/27/19 21:18:59.823][DEBUG] [Sequence Thread] EventMarker 9 - t:m81 (1); e:0; f:27; o:
[02/27/19 21:18:59.823][DEBUG] [Sequence Thread] EventMarker 10 - t:m81 (1); e:0; f:27; o:
[02/27/19 21:18:59.823][DEBUG] [Sequence Thread] Finished sending frame capture.  Entering wait mode...
[02/27/19 21:18:59.823][DEBUG] [Sequence Thread] EventMarker 11 - t:m81 (1); e:0; f:27; o:
[02/27/19 21:18:59.823][DEBUG] [Sequence Thread] EventMarker 12 - t:m81 (1); e:0; f:27; o:
[02/27/19 21:18:59.826][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Starting integration of m81; Event 1; Frame 28 for 30s...
[02/27/19 21:18:59.826][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Starting integration of m81; Event 1; Frame 28 for 30s...)...
[02/27/19 21:18:59.827][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, TimedError): (2019-02-25) Failure while integrating m81; Event 1; Frame 28 for 30s. Image has not downloaded in alloted time period.
[02/27/19 21:18:59.827][DEBUG] [Sequence Thread] GNS: Sent timed event to GNS...
[02/27/19 21:18:59.828][DEBUG] [Sequence Thread] EventMarker 13 - t:m81 (1); e:0; f:27; o:
[02/27/19 21:18:59.828][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE message received...
[02/27/19 21:18:59.829][DEBUG] [Camera Thread] SetAscomGain to 76
[02/27/19 21:18:59.830][DEBUG] [Camera Thread] Camera gain set to 76
[02/27/19 21:18:59.830][DEBUG] [Camera Thread] SetAscomNormalSpeed... 
[02/27/19 21:18:59.830][DEBUG] [Camera Thread] Cannot set readout speed, not supported by camera...
[02/27/19 21:19:00.196][DEBUG] [PHD2 Listener Thread] PHD2: Settle done received: GOOD
[02/27/19 21:19:09.799][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:19:09.820][DEBUG] [MF Update Thread] Performing serialize...
[02/27/19 21:19:29.848][DEBUG] [Sequence Thread] EventMarker 15 - t:m81 (1); e:0; f:27; o:
[02/27/19 21:19:29.852][DEBUG] [Sequence Thread] Waking from exposure time sleep period...
[02/27/19 21:19:29.853][DEBUG] [Sequence Thread] Checking to see if the CCD has a temp...
[02/27/19 21:19:29.853][DEBUG] [Sequence Thread] Saving the CCD temp...
[02/27/19 21:19:29.858][DEBUG] [Sequence Thread] Entering super dangerous loop to await image completion...
[02/27/19 21:19:29.860][DEBUG] [Sequence Thread] EventMarker 16 - t:m81 (1); e:0; f:27; o:
[02/27/19 21:19:30.964][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE complete...
[02/27/19 21:19:31.366][DEBUG] [Sequence Thread] EventMarker 17 - t:m81 (1); e:0; f:27; o:
[02/27/19 21:19:31.366][DEBUG] [Sequence Thread] Image reported as complete.  Continuing...
[02/27/19 21:19:31.366][DEBUG] [Sequence Thread] Collecting FITs headers...
[02/27/19 21:19:31.367][DEBUG] [Sequence Thread] ASCOM Camera: Could not get last exposure start time.  Reported as (unknown)
[02/27/19 21:19:31.367][DEBUG] [Sequence Thread] DATE-LOC time provided by SGPro (failed to retrieve valid entry from camera)...
[02/27/19 21:19:31.369][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info for last solve...
[02/27/19 21:19:31.369][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info from UI...
[02/27/19 21:19:31.369][DEBUG] [Sequence Thread] Clearing timed monitoring events...
[02/27/19 21:19:31.375][DEBUG] [Sequence Thread] Created full file name (file does not exist): C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_211858_frame28_-15C.fit
[02/27/19 21:19:31.375][DEBUG] [Sequence Thread] SaveFileAscom: Start...
[02/27/19 21:19:31.375][DEBUG] [Sequence Thread] SaveFileAscom: Checking image data...
[02/27/19 21:19:31.375][DEBUG] [Sequence Thread] SaveFileAscom: Create normal preview bitmap...
[02/27/19 21:19:31.381][DEBUG] [Sequence Thread] SaveFileAscom: Locking preview bits...
[02/27/19 21:19:31.381][DEBUG] [Sequence Thread] SaveFileAscom: Validating file name...
[02/27/19 21:19:31.381][DEBUG] [Sequence Thread] SaveFileAscom: Starting byte traversal...
[02/27/19 21:19:31.563][DEBUG] [Sequence Thread] SaveFileAscom: Unlocking preview bits...
[02/27/19 21:19:31.564][DEBUG] [Sequence Thread] SaveFileAscom: Saving preview bitmap to disk...
[02/27/19 21:19:31.564][DEBUG] [Sequence Thread] SaveFileBmp16: Locking bitmap for disk write...
[02/27/19 21:19:31.564][DEBUG] [Sequence Thread] SaveFileBmp16: Opening file stream...
[02/27/19 21:19:31.564][DEBUG] [Sequence Thread] SaveFileBmp16: Writing FITS headers...
[02/27/19 21:19:31.575][DEBUG] [Sequence Thread] SaveFileBmp16: Traversing and persisting bitmap data...
[02/27/19 21:19:31.716][DEBUG] [Sequence Thread] SaveFileBmp16: FITS block fill...
[02/27/19 21:19:31.716][DEBUG] [Sequence Thread] SaveFileBmp16: Unlocking bitmap...
[02/27/19 21:19:31.716][DEBUG] [Sequence Thread] SaveFileBmp16: Closing file stream
[02/27/19 21:19:31.721][DEBUG] [Sequence Thread] SaveFileAscom: Displaying image preview in UI...
[02/27/19 21:19:31.721][DEBUG] [Sequence Thread] Internal Interface: Set Preview...
[02/27/19 21:19:31.721][DEBUG] [Sequence Thread] Display image preview using asynch task...
[02/27/19 21:19:32.039][DEBUG] [Main Thread] --> Find stars (normal)
[02/27/19 21:19:32.129][DEBUG] [Main Thread] AF frame was too large... downsample = 0.5...
[02/27/19 21:19:33.848][DEBUG] [Main Thread] Star detection using min star size of 3px...
[02/27/19 21:19:33.848][DEBUG] [Main Thread] Star detection using max star size of 60px...
[02/27/19 21:19:33.893][DEBUG] [Main Thread] Find stars took: 1854 ms...
[02/27/19 21:19:33.893][DEBUG] [Main Thread] Star list contains 190 stars...
[02/27/19 21:19:33.893][DEBUG] [Main Thread] Calculating HFR with sample size: 6
[02/27/19 21:19:34.466][DEBUG] [Sequence Thread] SaveFileAscom: Done
[02/27/19 21:19:34.466][DEBUG] [Sequence Thread] =========== Save file took 3096 ms
[02/27/19 21:19:34.466][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_211858_frame28_-15C.fit" saved.  HFR = 2.52.
[02/27/19 21:19:34.466][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_211858_frame28_-15C.fit" saved.  HFR = 2.52.)...
[02/27/19 21:19:34.470][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:19:34.470][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:0; f:27; o:
[02/27/19 21:19:34.470][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:19:34.470][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:19:34.470][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:19:34.572][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:19:34.572][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:19:34.572][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:0; f:27; o:
[02/27/19 21:19:34.572][DEBUG] [Sequence Thread] EventMarker 18 - t:m81 (1); e:0; f:27; o:
[02/27/19 21:19:34.582][DEBUG] [Sequence Thread] EventMarker 19 - t:m81 (1); e:0; f:28; o:
[02/27/19 21:19:34.582][DEBUG] [Sequence Thread] EventMarker 20 - t:m81 (1); e:0; f:28; o:
[02/27/19 21:19:34.582][DEBUG] [Sequence Thread] Running post event...
[02/27/19 21:19:34.582][DEBUG] [Sequence Thread] EventMarker 21 - t:m81 (1); e:0; f:28; o:
[02/27/19 21:19:34.584][DEBUG] [Sequence Thread] Incremented numComplete (28) for event[0]...
[02/27/19 21:19:34.596][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:19:34.596][DEBUG] [Sequence Thread] Current event[0] frame count: 28/120...
[02/27/19 21:19:34.596][DEBUG] [Sequence Thread] Current event event[0] has remaining frames.  Returning current event.
[02/27/19 21:19:34.596][DEBUG] [Sequence Thread] Checking for auto manual focus (post)...
[02/27/19 21:19:34.596][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:19:34.609][DEBUG] [Sequence Thread] Attempting to move to next event...
[02/27/19 21:19:34.609][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:19:34.609][DEBUG] [Sequence Thread] Current event[0] frame count: 28/120...
[02/27/19 21:19:34.609][DEBUG] [Sequence Thread] Current event event[0] has remaining frames.  Returning current event.
[02/27/19 21:19:34.609][DEBUG] [Sequence Thread] Running pre event...
[02/27/19 21:19:34.622][DEBUG] [Sequence Thread] Current target has end time at 28/02/2019 06:30:00
[02/27/19 21:19:34.622][DEBUG] [Sequence Thread] End time of next frame is at 27/02/2019 21:20:04
[02/27/19 21:19:34.622][DEBUG] [Sequence Thread] Target is still before end time, continuing...
[02/27/19 21:19:34.622][DEBUG] [Sequence Thread] Running capture event...
[02/27/19 21:19:34.624][DEBUG] [Sequence Thread] ------------- Starting capture frame for event[0] -------------
[02/27/19 21:19:34.629][DEBUG] [Sequence Thread] Sending commands...
[02/27/19 21:19:34.629][DEBUG] [Sequence Thread] SetFlatBox: Frame Type is Light
[02/27/19 21:19:34.629][DEBUG] [Sequence Thread] EventMarker 2 - t:m81 (1); e:0; f:28; o:
[02/27/19 21:19:34.629][DEBUG] [Sequence Thread] Checking if Meridian Flip is needed
[02/27/19 21:19:34.629][DEBUG] [Sequence Thread] Telescope is on the West side of the mount
[02/27/19 21:19:34.629][DEBUG] [Sequence Thread] Meridian Flip not needed, Hour Angle < Degrees Past To Flip: -36.4516094141515 < 0
[02/27/19 21:19:34.629][DEBUG] [Sequence Thread] EventMarker 3 - t:m81 (1); e:0; f:28; o:
[02/27/19 21:19:34.629][DEBUG] [Sequence Thread] EventMarker 4 - t:m81 (1); e:0; f:28; o:
[02/27/19 21:19:34.629][DEBUG] [Sequence Thread] Setting filter position 1...
[02/27/19 21:19:34.629][DEBUG] [Sequence Thread] Filter position 1 is already set.  Skipping...
[02/27/19 21:19:34.629][DEBUG] [Sequence Thread] EventMarker 5 - t:m81 (1); e:0; f:28; o:
[02/27/19 21:19:34.629][DEBUG] [Sequence Thread] Checking for auto manual focus (pre)...
[02/27/19 21:19:34.629][DEBUG] [Sequence Thread] EventMarker 6 - t:m81 (1); e:0; f:28; o:
[02/27/19 21:19:34.632][DEBUG] [Sequence Thread] Autoguider will not dither this frame. Total frames is not a modulus of 5
[02/27/19 21:19:34.632][DEBUG] [Sequence Thread] EventMarker 1 - t:m81 (1); e:0; f:28; o:
[02/27/19 21:19:34.632][DEBUG] [Sequence Thread] Created base name for frame capture: m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_211934_frame29_-15C
[02/27/19 21:19:34.632][DEBUG] [Sequence Thread] Created directory for frame capture: C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\
[02/27/19 21:19:34.632][DEBUG] [Sequence Thread] EventMarker 7 - t:m81 (1); e:0; f:28; o:
[02/27/19 21:19:34.632][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:19:34.632][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:0; f:28; o:
[02/27/19 21:19:34.632][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:19:34.632][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:19:34.632][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:19:34.733][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:19:34.733][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:19:34.733][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:0; f:28; o:
[02/27/19 21:19:34.734][DEBUG] [Sequence Thread] {"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}
[02/27/19 21:19:34.734][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}

[02/27/19 21:19:34.734][DEBUG] [Sequence Thread] EventMarker 172 - t:m81 (1); e:0; f:28; o:
[02/27/19 21:19:34.734][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:19:34.734][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:19:34.734][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:19:34.789][DEBUG] [PHD2 Listener Thread] Unknown object from PHD2: {"Event":"SettleBegin","Timestamp":1551302374.739,"Host":"JGL2_2","Inst":1}
[02/27/19 21:19:34.834][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:19:34.834][DEBUG] [Sequence Thread] EventMarker 173 - t:m81 (1); e:0; f:28; o:
[02/27/19 21:19:34.835][DEBUG] [Sequence Thread] User has elected to skip guider settling over time...
[02/27/19 21:19:34.835][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Attempting to settle the auto guider...
[02/27/19 21:19:34.835][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Attempting to settle the auto guider...)...
[02/27/19 21:19:34.835][DEBUG] [Sequence Thread] Waiting for Auto Guider distance to fall below 0.5
[02/27/19 21:19:34.835][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:19:34.835][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:19:34.842][DEBUG] [Sequence Thread] Distance is below 0.5, starting timer...
[02/27/19 21:19:35.343][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:19:35.343][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:19:35.709][DEBUG] [Sequence Thread] Distance stayed below 0.5 for 0 seconds, done settling...
[02/27/19 21:19:35.710][DEBUG] [Sequence Thread] Auto guider has settled...
[02/27/19 21:19:35.710][DEBUG] [Sequence Thread] EventMarker 8 - t:m81 (1); e:0; f:28; o:
[02/27/19 21:19:35.710][DEBUG] [Sequence Thread] EventMarker 9 - t:m81 (1); e:0; f:28; o:
[02/27/19 21:19:35.710][DEBUG] [Sequence Thread] EventMarker 10 - t:m81 (1); e:0; f:28; o:
[02/27/19 21:19:35.710][DEBUG] [Sequence Thread] Finished sending frame capture.  Entering wait mode...
[02/27/19 21:19:35.710][DEBUG] [Sequence Thread] EventMarker 11 - t:m81 (1); e:0; f:28; o:
[02/27/19 21:19:35.711][DEBUG] [Sequence Thread] EventMarker 12 - t:m81 (1); e:0; f:28; o:
[02/27/19 21:19:35.712][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE message received...
[02/27/19 21:19:35.713][DEBUG] [Camera Thread] SetAscomGain to 76
[02/27/19 21:19:35.714][DEBUG] [Camera Thread] Camera gain set to 76
[02/27/19 21:19:35.714][DEBUG] [Camera Thread] SetAscomNormalSpeed... 
[02/27/19 21:19:35.714][DEBUG] [Camera Thread] Cannot set readout speed, not supported by camera...
[02/27/19 21:19:35.715][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Starting integration of m81; Event 1; Frame 29 for 30s...
[02/27/19 21:19:35.715][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Starting integration of m81; Event 1; Frame 29 for 30s...)...
[02/27/19 21:19:35.715][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, TimedError): (2019-02-25) Failure while integrating m81; Event 1; Frame 29 for 30s. Image has not downloaded in alloted time period.
[02/27/19 21:19:35.715][DEBUG] [Sequence Thread] GNS: Sent timed event to GNS...
[02/27/19 21:19:35.716][DEBUG] [Sequence Thread] EventMarker 13 - t:m81 (1); e:0; f:28; o:
[02/27/19 21:19:36.204][DEBUG] [PHD2 Listener Thread] PHD2: Settle done received: GOOD
[02/27/19 21:20:05.788][DEBUG] [Sequence Thread] EventMarker 15 - t:m81 (1); e:0; f:28; o:
[02/27/19 21:20:05.791][DEBUG] [Sequence Thread] Waking from exposure time sleep period...
[02/27/19 21:20:05.791][DEBUG] [Sequence Thread] Checking to see if the CCD has a temp...
[02/27/19 21:20:05.791][DEBUG] [Sequence Thread] Saving the CCD temp...
[02/27/19 21:20:05.798][DEBUG] [Sequence Thread] Entering super dangerous loop to await image completion...
[02/27/19 21:20:05.800][DEBUG] [Sequence Thread] EventMarker 16 - t:m81 (1); e:0; f:28; o:
[02/27/19 21:20:06.845][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE complete...
[02/27/19 21:20:07.305][DEBUG] [Sequence Thread] EventMarker 17 - t:m81 (1); e:0; f:28; o:
[02/27/19 21:20:07.305][DEBUG] [Sequence Thread] Image reported as complete.  Continuing...
[02/27/19 21:20:07.305][DEBUG] [Sequence Thread] Collecting FITs headers...
[02/27/19 21:20:07.306][DEBUG] [Sequence Thread] ASCOM Camera: Could not get last exposure start time.  Reported as (unknown)
[02/27/19 21:20:07.306][DEBUG] [Sequence Thread] DATE-LOC time provided by SGPro (failed to retrieve valid entry from camera)...
[02/27/19 21:20:07.308][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info for last solve...
[02/27/19 21:20:07.308][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info from UI...
[02/27/19 21:20:07.308][DEBUG] [Sequence Thread] Clearing timed monitoring events...
[02/27/19 21:20:07.314][DEBUG] [Sequence Thread] Created full file name (file does not exist): C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_211934_frame29_-15C.fit
[02/27/19 21:20:07.314][DEBUG] [Sequence Thread] SaveFileAscom: Start...
[02/27/19 21:20:07.314][DEBUG] [Sequence Thread] SaveFileAscom: Checking image data...
[02/27/19 21:20:07.314][DEBUG] [Sequence Thread] SaveFileAscom: Create normal preview bitmap...
[02/27/19 21:20:07.320][DEBUG] [Sequence Thread] SaveFileAscom: Locking preview bits...
[02/27/19 21:20:07.320][DEBUG] [Sequence Thread] SaveFileAscom: Validating file name...
[02/27/19 21:20:07.320][DEBUG] [Sequence Thread] SaveFileAscom: Starting byte traversal...
[02/27/19 21:20:07.488][DEBUG] [Sequence Thread] SaveFileAscom: Unlocking preview bits...
[02/27/19 21:20:07.488][DEBUG] [Sequence Thread] SaveFileAscom: Saving preview bitmap to disk...
[02/27/19 21:20:07.488][DEBUG] [Sequence Thread] SaveFileBmp16: Locking bitmap for disk write...
[02/27/19 21:20:07.488][DEBUG] [Sequence Thread] SaveFileBmp16: Opening file stream...
[02/27/19 21:20:07.489][DEBUG] [Sequence Thread] SaveFileBmp16: Writing FITS headers...
[02/27/19 21:20:07.489][DEBUG] [Sequence Thread] SaveFileBmp16: Traversing and persisting bitmap data...
[02/27/19 21:20:07.647][DEBUG] [Sequence Thread] SaveFileBmp16: FITS block fill...
[02/27/19 21:20:07.647][DEBUG] [Sequence Thread] SaveFileBmp16: Unlocking bitmap...
[02/27/19 21:20:07.647][DEBUG] [Sequence Thread] SaveFileBmp16: Closing file stream
[02/27/19 21:20:07.651][DEBUG] [Sequence Thread] SaveFileAscom: Displaying image preview in UI...
[02/27/19 21:20:07.651][DEBUG] [Sequence Thread] Internal Interface: Set Preview...
[02/27/19 21:20:07.651][DEBUG] [Sequence Thread] Display image preview using asynch task...
[02/27/19 21:20:08.066][DEBUG] [Main Thread] --> Find stars (normal)
[02/27/19 21:20:08.144][DEBUG] [Main Thread] AF frame was too large... downsample = 0.5...
[02/27/19 21:20:09.558][DEBUG] [Main Thread] Star detection using min star size of 3px...
[02/27/19 21:20:09.558][DEBUG] [Main Thread] Star detection using max star size of 60px...
[02/27/19 21:20:09.603][DEBUG] [Main Thread] Find stars took: 1537 ms...
[02/27/19 21:20:09.603][DEBUG] [Main Thread] Star list contains 192 stars...
[02/27/19 21:20:09.603][DEBUG] [Main Thread] Calculating HFR with sample size: 6
[02/27/19 21:20:10.236][DEBUG] [Sequence Thread] SaveFileAscom: Done
[02/27/19 21:20:10.236][DEBUG] [Sequence Thread] =========== Save file took 2927 ms
[02/27/19 21:20:10.236][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_211934_frame29_-15C.fit" saved.  HFR = 2.66.
[02/27/19 21:20:10.236][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_211934_frame29_-15C.fit" saved.  HFR = 2.66.)...
[02/27/19 21:20:10.240][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:20:10.240][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:0; f:28; o:
[02/27/19 21:20:10.240][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:20:10.240][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:20:10.240][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:20:10.341][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:20:10.341][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:20:10.341][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:0; f:28; o:
[02/27/19 21:20:10.359][DEBUG] [Sequence Thread] EventMarker 18 - t:m81 (1); e:0; f:28; o:
[02/27/19 21:20:10.366][DEBUG] [Sequence Thread] EventMarker 19 - t:m81 (1); e:0; f:29; o:
[02/27/19 21:20:10.366][DEBUG] [Sequence Thread] EventMarker 20 - t:m81 (1); e:0; f:29; o:
[02/27/19 21:20:10.366][DEBUG] [Sequence Thread] Running post event...
[02/27/19 21:20:10.367][DEBUG] [Sequence Thread] EventMarker 21 - t:m81 (1); e:0; f:29; o:
[02/27/19 21:20:10.370][DEBUG] [Sequence Thread] Incremented numComplete (29) for event[0]...
[02/27/19 21:20:10.377][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:20:10.377][DEBUG] [Sequence Thread] Current event[0] frame count: 29/120...
[02/27/19 21:20:10.377][DEBUG] [Sequence Thread] Current event event[0] has remaining frames.  Returning current event.
[02/27/19 21:20:10.377][DEBUG] [Sequence Thread] Checking for auto manual focus (post)...
[02/27/19 21:20:10.378][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:20:10.391][DEBUG] [Sequence Thread] Attempting to move to next event...
[02/27/19 21:20:10.391][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:20:10.391][DEBUG] [Sequence Thread] Current event[0] frame count: 29/120...
[02/27/19 21:20:10.391][DEBUG] [Sequence Thread] Current event event[0] has remaining frames.  Returning current event.
[02/27/19 21:20:10.391][DEBUG] [Sequence Thread] Running pre event...
[02/27/19 21:20:10.412][DEBUG] [Sequence Thread] Current target has end time at 28/02/2019 06:30:00
[02/27/19 21:20:10.412][DEBUG] [Sequence Thread] End time of next frame is at 27/02/2019 21:20:40
[02/27/19 21:20:10.412][DEBUG] [Sequence Thread] Target is still before end time, continuing...
[02/27/19 21:20:10.412][DEBUG] [Sequence Thread] Running capture event...
[02/27/19 21:20:10.414][DEBUG] [Sequence Thread] ------------- Starting capture frame for event[0] -------------
[02/27/19 21:20:10.435][DEBUG] [Sequence Thread] Sending commands...
[02/27/19 21:20:10.435][DEBUG] [Sequence Thread] SetFlatBox: Frame Type is Light
[02/27/19 21:20:10.435][DEBUG] [Sequence Thread] EventMarker 2 - t:m81 (1); e:0; f:29; o:
[02/27/19 21:20:10.435][DEBUG] [Sequence Thread] Checking if Meridian Flip is needed
[02/27/19 21:20:10.435][DEBUG] [Sequence Thread] Telescope is on the West side of the mount
[02/27/19 21:20:10.435][DEBUG] [Sequence Thread] Meridian Flip not needed, Hour Angle < Degrees Past To Flip: -36.3047519199984 < 0
[02/27/19 21:20:10.435][DEBUG] [Sequence Thread] EventMarker 3 - t:m81 (1); e:0; f:29; o:
[02/27/19 21:20:10.435][DEBUG] [Sequence Thread] EventMarker 4 - t:m81 (1); e:0; f:29; o:
[02/27/19 21:20:10.435][DEBUG] [Sequence Thread] Setting filter position 1...
[02/27/19 21:20:10.435][DEBUG] [Sequence Thread] Filter position 1 is already set.  Skipping...
[02/27/19 21:20:10.435][DEBUG] [Sequence Thread] EventMarker 5 - t:m81 (1); e:0; f:29; o:
[02/27/19 21:20:10.435][DEBUG] [Sequence Thread] Checking for auto manual focus (pre)...
[02/27/19 21:20:10.435][DEBUG] [Sequence Thread] EventMarker 6 - t:m81 (1); e:0; f:29; o:
[02/27/19 21:20:10.438][DEBUG] [Sequence Thread] Running dither...
[02/27/19 21:20:10.455][DEBUG] [Sequence Thread] PHD2 dither request: 1...
[02/27/19 21:20:10.455][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:20:10.455][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:20:10.455][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:20:10.556][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:20:11.557][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:20:11.557][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:20:11.557][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:20:11.657][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:20:12.657][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:20:12.657][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:20:12.657][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:20:12.758][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:20:13.758][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:20:13.758][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:20:13.758][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:20:13.858][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:20:14.858][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:20:14.858][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:20:14.858][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:20:14.959][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:20:14.959][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:20:14.959][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:20:14.959][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:20:15.060][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:20:15.060][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "dither", "params": [1, false, {"pixels": 0.5, "time": 0, "timeout": 600}], "id": 1002}

[02/27/19 21:20:15.063][DEBUG] [Sequence Thread] EventMarker 1 - t:m81 (1); e:0; f:29; o:
[02/27/19 21:20:15.064][DEBUG] [Sequence Thread] Created base name for frame capture: m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_212015_frame30_-15C
[02/27/19 21:20:15.064][DEBUG] [Sequence Thread] Created directory for frame capture: C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\
[02/27/19 21:20:15.064][DEBUG] [Sequence Thread] EventMarker 7 - t:m81 (1); e:0; f:29; o:
[02/27/19 21:20:15.064][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:20:15.064][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:0; f:29; o:
[02/27/19 21:20:15.064][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:20:15.064][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:20:15.064][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:20:15.116][DEBUG] [PHD2 Listener Thread] Unknown object from PHD2: {"Event":"SettleBegin","Timestamp":1551302415.074,"Host":"JGL2_2","Inst":1}
[02/27/19 21:20:15.166][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:20:15.166][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:20:15.166][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:0; f:29; o:
[02/27/19 21:20:15.166][DEBUG] [Sequence Thread] {"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}
[02/27/19 21:20:15.166][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}

[02/27/19 21:20:15.166][DEBUG] [Sequence Thread] EventMarker 172 - t:m81 (1); e:0; f:29; o:
[02/27/19 21:20:15.166][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:20:15.166][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:20:15.167][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:20:15.218][DEBUG] [PHD2 Listener Thread] Error received from RPC: Cannot initiate guide while dither is in progress
[02/27/19 21:20:15.267][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:20:15.267][DEBUG] [Sequence Thread] EventMarker 173 - t:m81 (1); e:0; f:29; o:
[02/27/19 21:20:15.268][DEBUG] [Sequence Thread] User has elected to skip guider settling over time...
[02/27/19 21:20:15.268][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Attempting to settle the auto guider...
[02/27/19 21:20:15.268][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Attempting to settle the auto guider...)...
[02/27/19 21:20:15.268][DEBUG] [Sequence Thread] Waiting for Auto Guider distance to fall below 0.5
[02/27/19 21:20:15.268][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:20:15.268][DEBUG] [Sequence Thread] PHD2 distance request returned 0.2...
[02/27/19 21:20:15.276][DEBUG] [Sequence Thread] Distance is below 0.5, starting timer...
[02/27/19 21:20:15.777][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:20:15.777][DEBUG] [Sequence Thread] PHD2 distance request returned 0.2...
[02/27/19 21:20:15.786][DEBUG] [Sequence Thread] Distance stayed below 0.5 for 0 seconds, done settling...
[02/27/19 21:20:15.786][DEBUG] [Sequence Thread] Auto guider has settled...
[02/27/19 21:20:15.786][DEBUG] [Sequence Thread] EventMarker 8 - t:m81 (1); e:0; f:29; o:
[02/27/19 21:20:15.786][DEBUG] [Sequence Thread] EventMarker 9 - t:m81 (1); e:0; f:29; o:
[02/27/19 21:20:15.786][DEBUG] [Sequence Thread] EventMarker 10 - t:m81 (1); e:0; f:29; o:
[02/27/19 21:20:15.786][DEBUG] [Sequence Thread] Finished sending frame capture.  Entering wait mode...
[02/27/19 21:20:15.786][DEBUG] [Sequence Thread] EventMarker 11 - t:m81 (1); e:0; f:29; o:
[02/27/19 21:20:15.786][DEBUG] [Sequence Thread] EventMarker 12 - t:m81 (1); e:0; f:29; o:
[02/27/19 21:20:15.791][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Starting integration of m81; Event 1; Frame 30 for 30s...
[02/27/19 21:20:15.791][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Starting integration of m81; Event 1; Frame 30 for 30s...)...
[02/27/19 21:20:15.792][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE message received...
[02/27/19 21:20:15.792][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, TimedError): (2019-02-25) Failure while integrating m81; Event 1; Frame 30 for 30s. Image has not downloaded in alloted time period.
[02/27/19 21:20:15.792][DEBUG] [Sequence Thread] GNS: Sent timed event to GNS...
[02/27/19 21:20:15.793][DEBUG] [Sequence Thread] EventMarker 13 - t:m81 (1); e:0; f:29; o:
[02/27/19 21:20:15.793][DEBUG] [Camera Thread] SetAscomGain to 76
[02/27/19 21:20:15.794][DEBUG] [Camera Thread] Camera gain set to 76
[02/27/19 21:20:15.794][DEBUG] [Camera Thread] SetAscomNormalSpeed... 
[02/27/19 21:20:15.794][DEBUG] [Camera Thread] Cannot set readout speed, not supported by camera...
[02/27/19 21:20:22.234][DEBUG] [PHD2 Listener Thread] PHD2: Settle done received: GOOD
[02/27/19 21:20:32.315][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:20:38.155][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:20:38.168][DEBUG] [MF Update Thread] Performing serialize...
[02/27/19 21:20:45.933][DEBUG] [Sequence Thread] EventMarker 15 - t:m81 (1); e:0; f:29; o:
[02/27/19 21:20:45.937][DEBUG] [Sequence Thread] Waking from exposure time sleep period...
[02/27/19 21:20:45.938][DEBUG] [Sequence Thread] Checking to see if the CCD has a temp...
[02/27/19 21:20:45.938][DEBUG] [Sequence Thread] Saving the CCD temp...
[02/27/19 21:20:45.945][DEBUG] [Sequence Thread] Entering super dangerous loop to await image completion...
[02/27/19 21:20:45.947][DEBUG] [Sequence Thread] EventMarker 16 - t:m81 (1); e:0; f:29; o:
[02/27/19 21:21:18.464][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE complete...
[02/27/19 21:21:18.496][DEBUG] [Sequence Thread] EventMarker 17 - t:m81 (1); e:0; f:29; o:
[02/27/19 21:21:18.496][DEBUG] [Sequence Thread] Image reported as complete.  Continuing...
[02/27/19 21:21:18.496][DEBUG] [Sequence Thread] Collecting FITs headers...
[02/27/19 21:21:18.497][DEBUG] [Sequence Thread] ASCOM Camera: Could not get last exposure start time.  Reported as (unknown)
[02/27/19 21:21:18.497][DEBUG] [Sequence Thread] DATE-LOC time provided by SGPro (failed to retrieve valid entry from camera)...
[02/27/19 21:21:18.497][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info for last solve...
[02/27/19 21:21:18.497][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info from UI...
[02/27/19 21:21:18.498][DEBUG] [Sequence Thread] Clearing timed monitoring events...
[02/27/19 21:21:18.501][DEBUG] [Sequence Thread] Created full file name (file does not exist): C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_212015_frame30_-15C.fit
[02/27/19 21:21:18.501][DEBUG] [Sequence Thread] SaveFileAscom: Start...
[02/27/19 21:21:18.501][DEBUG] [Sequence Thread] SaveFileAscom: Checking image data...
[02/27/19 21:21:18.501][DEBUG] [Sequence Thread] SaveFileAscom: Create normal preview bitmap...
[02/27/19 21:21:18.506][DEBUG] [Sequence Thread] SaveFileAscom: Locking preview bits...
[02/27/19 21:21:18.506][DEBUG] [Sequence Thread] SaveFileAscom: Validating file name...
[02/27/19 21:21:18.506][DEBUG] [Sequence Thread] SaveFileAscom: Starting byte traversal...
[02/27/19 21:21:18.683][DEBUG] [Sequence Thread] SaveFileAscom: Unlocking preview bits...
[02/27/19 21:21:18.683][DEBUG] [Sequence Thread] SaveFileAscom: Saving preview bitmap to disk...
[02/27/19 21:21:18.683][DEBUG] [Sequence Thread] SaveFileBmp16: Locking bitmap for disk write...
[02/27/19 21:21:18.683][DEBUG] [Sequence Thread] SaveFileBmp16: Opening file stream...
[02/27/19 21:21:18.684][DEBUG] [Sequence Thread] SaveFileBmp16: Writing FITS headers...
[02/27/19 21:21:18.684][DEBUG] [Sequence Thread] SaveFileBmp16: Traversing and persisting bitmap data...
[02/27/19 21:21:18.860][DEBUG] [Sequence Thread] SaveFileBmp16: FITS block fill...
[02/27/19 21:21:18.860][DEBUG] [Sequence Thread] SaveFileBmp16: Unlocking bitmap...
[02/27/19 21:21:18.860][DEBUG] [Sequence Thread] SaveFileBmp16: Closing file stream
[02/27/19 21:21:18.863][DEBUG] [Sequence Thread] SaveFileAscom: Displaying image preview in UI...
[02/27/19 21:21:18.863][DEBUG] [Sequence Thread] Internal Interface: Set Preview...
[02/27/19 21:21:18.863][DEBUG] [Sequence Thread] Display image preview using asynch task...
[02/27/19 21:21:19.155][DEBUG] [Main Thread] --> Find stars (normal)
[02/27/19 21:21:19.222][DEBUG] [Main Thread] AF frame was too large... downsample = 0.5...
[02/27/19 21:21:21.012][DEBUG] [Main Thread] Star detection using min star size of 3px...
[02/27/19 21:21:21.012][DEBUG] [Main Thread] Star detection using max star size of 60px...
[02/27/19 21:21:21.057][DEBUG] [Main Thread] Find stars took: 1902 ms...
[02/27/19 21:21:21.057][DEBUG] [Main Thread] Star list contains 201 stars...
[02/27/19 21:21:21.057][DEBUG] [Main Thread] Calculating HFR with sample size: 6
[02/27/19 21:21:21.952][DEBUG] [Sequence Thread] SaveFileAscom: Done
[02/27/19 21:21:21.952][DEBUG] [Sequence Thread] =========== Save file took 3454 ms
[02/27/19 21:21:21.952][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_212015_frame30_-15C.fit" saved.  HFR = 2.59.
[02/27/19 21:21:21.952][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_212015_frame30_-15C.fit" saved.  HFR = 2.59.)...
[02/27/19 21:21:21.956][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:21:21.957][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:0; f:29; o:
[02/27/19 21:21:21.957][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:21:21.957][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:21:21.957][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:21:22.057][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:21:22.057][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:21:22.057][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:0; f:29; o:
[02/27/19 21:21:22.057][DEBUG] [Sequence Thread] EventMarker 18 - t:m81 (1); e:0; f:29; o:
[02/27/19 21:21:22.066][DEBUG] [Sequence Thread] EventMarker 19 - t:m81 (1); e:0; f:30; o:
[02/27/19 21:21:22.066][DEBUG] [Sequence Thread] EventMarker 20 - t:m81 (1); e:0; f:30; o:
[02/27/19 21:21:22.066][DEBUG] [Sequence Thread] Running post event...
[02/27/19 21:21:22.066][DEBUG] [Sequence Thread] EventMarker 21 - t:m81 (1); e:0; f:30; o:
[02/27/19 21:21:22.069][DEBUG] [Sequence Thread] Incremented numComplete (30) for event[0]...
[02/27/19 21:21:22.070][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:21:22.070][DEBUG] [Sequence Thread] Current event[0] frame count: 30/120...
[02/27/19 21:21:22.070][DEBUG] [Sequence Thread] Current event event[0] has remaining frames.  Returning current event.
[02/27/19 21:21:22.070][DEBUG] [Sequence Thread] Checking for auto manual focus (post)...
[02/27/19 21:21:22.071][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:21:22.083][DEBUG] [Sequence Thread] Attempting to move to next event...
[02/27/19 21:21:22.083][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:21:22.083][DEBUG] [Sequence Thread] Current event[0] frame count: 30/120...
[02/27/19 21:21:22.083][DEBUG] [Sequence Thread] Current event event[0] has remaining frames.  Returning current event.
[02/27/19 21:21:22.083][DEBUG] [Sequence Thread] Running pre event...
[02/27/19 21:21:22.104][DEBUG] [Sequence Thread] Current target has end time at 28/02/2019 06:30:00
[02/27/19 21:21:22.104][DEBUG] [Sequence Thread] End time of next frame is at 27/02/2019 21:21:52
[02/27/19 21:21:22.104][DEBUG] [Sequence Thread] Target is still before end time, continuing...
[02/27/19 21:21:22.104][DEBUG] [Sequence Thread] Running capture event...
[02/27/19 21:21:22.105][DEBUG] [Sequence Thread] ------------- Starting capture frame for event[0] -------------
[02/27/19 21:21:22.111][DEBUG] [Sequence Thread] Sending commands...
[02/27/19 21:21:22.111][DEBUG] [Sequence Thread] SetFlatBox: Frame Type is Light
[02/27/19 21:21:22.111][DEBUG] [Sequence Thread] EventMarker 2 - t:m81 (1); e:0; f:30; o:
[02/27/19 21:21:22.111][DEBUG] [Sequence Thread] Checking if Meridian Flip is needed
[02/27/19 21:21:22.111][DEBUG] [Sequence Thread] Telescope is on the West side of the mount
[02/27/19 21:21:22.111][DEBUG] [Sequence Thread] Meridian Flip not needed, Hour Angle < Degrees Past To Flip: -36.0078888228162 < 0
[02/27/19 21:21:22.111][DEBUG] [Sequence Thread] EventMarker 3 - t:m81 (1); e:0; f:30; o:
[02/27/19 21:21:22.111][DEBUG] [Sequence Thread] EventMarker 4 - t:m81 (1); e:0; f:30; o:
[02/27/19 21:21:22.111][DEBUG] [Sequence Thread] Setting filter position 1...
[02/27/19 21:21:22.111][DEBUG] [Sequence Thread] Filter position 1 is already set.  Skipping...
[02/27/19 21:21:22.111][DEBUG] [Sequence Thread] EventMarker 5 - t:m81 (1); e:0; f:30; o:
[02/27/19 21:21:22.111][DEBUG] [Sequence Thread] Checking for auto manual focus (pre)...
[02/27/19 21:21:22.111][DEBUG] [Sequence Thread] EventMarker 6 - t:m81 (1); e:0; f:30; o:
[02/27/19 21:21:22.114][DEBUG] [Sequence Thread] Autoguider will not dither this frame. Total frames is not a modulus of 5
[02/27/19 21:21:22.114][DEBUG] [Sequence Thread] EventMarker 1 - t:m81 (1); e:0; f:30; o:
[02/27/19 21:21:22.115][DEBUG] [Sequence Thread] Created base name for frame capture: m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_212122_frame31_-15C
[02/27/19 21:21:22.115][DEBUG] [Sequence Thread] Created directory for frame capture: C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\
[02/27/19 21:21:22.115][DEBUG] [Sequence Thread] EventMarker 7 - t:m81 (1); e:0; f:30; o:
[02/27/19 21:21:22.115][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:21:22.115][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:0; f:30; o:
[02/27/19 21:21:22.115][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:21:22.115][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:21:22.115][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:21:22.216][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:21:22.216][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:21:22.216][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:0; f:30; o:
[02/27/19 21:21:22.216][DEBUG] [Sequence Thread] {"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}
[02/27/19 21:21:22.216][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}

[02/27/19 21:21:22.216][DEBUG] [Sequence Thread] EventMarker 172 - t:m81 (1); e:0; f:30; o:
[02/27/19 21:21:22.216][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:21:22.216][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:21:22.216][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:21:22.288][DEBUG] [PHD2 Listener Thread] Unknown object from PHD2: {"Event":"SettleBegin","Timestamp":1551302482.245,"Host":"JGL2_2","Inst":1}
[02/27/19 21:21:22.317][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:21:22.317][DEBUG] [Sequence Thread] EventMarker 173 - t:m81 (1); e:0; f:30; o:
[02/27/19 21:21:22.318][DEBUG] [Sequence Thread] User has elected to skip guider settling over time...
[02/27/19 21:21:22.318][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Attempting to settle the auto guider...
[02/27/19 21:21:22.318][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Attempting to settle the auto guider...)...
[02/27/19 21:21:22.318][DEBUG] [Sequence Thread] Waiting for Auto Guider distance to fall below 0.5
[02/27/19 21:21:22.318][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:21:22.318][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:21:22.326][DEBUG] [Sequence Thread] Distance is below 0.5, starting timer...
[02/27/19 21:21:22.826][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:21:22.826][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:21:23.130][DEBUG] [Sequence Thread] Distance stayed below 0.5 for 0 seconds, done settling...
[02/27/19 21:21:23.131][DEBUG] [Sequence Thread] Auto guider has settled...
[02/27/19 21:21:23.131][DEBUG] [Sequence Thread] EventMarker 8 - t:m81 (1); e:0; f:30; o:
[02/27/19 21:21:23.131][DEBUG] [Sequence Thread] EventMarker 9 - t:m81 (1); e:0; f:30; o:
[02/27/19 21:21:23.131][DEBUG] [Sequence Thread] EventMarker 10 - t:m81 (1); e:0; f:30; o:
[02/27/19 21:21:23.131][DEBUG] [Sequence Thread] Finished sending frame capture.  Entering wait mode...
[02/27/19 21:21:23.131][DEBUG] [Sequence Thread] EventMarker 11 - t:m81 (1); e:0; f:30; o:
[02/27/19 21:21:23.131][DEBUG] [Sequence Thread] EventMarker 12 - t:m81 (1); e:0; f:30; o:
[02/27/19 21:21:23.134][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Starting integration of m81; Event 1; Frame 31 for 30s...
[02/27/19 21:21:23.134][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Starting integration of m81; Event 1; Frame 31 for 30s...)...
[02/27/19 21:21:23.135][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, TimedError): (2019-02-25) Failure while integrating m81; Event 1; Frame 31 for 30s. Image has not downloaded in alloted time period.
[02/27/19 21:21:23.135][DEBUG] [Sequence Thread] GNS: Sent timed event to GNS...
[02/27/19 21:21:23.136][DEBUG] [Sequence Thread] EventMarker 13 - t:m81 (1); e:0; f:30; o:
[02/27/19 21:21:23.141][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE message received...
[02/27/19 21:21:23.142][DEBUG] [Camera Thread] SetAscomGain to 76
[02/27/19 21:21:23.143][DEBUG] [Camera Thread] Camera gain set to 76
[02/27/19 21:21:23.143][DEBUG] [Camera Thread] SetAscomNormalSpeed... 
[02/27/19 21:21:23.143][DEBUG] [Camera Thread] Cannot set readout speed, not supported by camera...
[02/27/19 21:21:24.205][DEBUG] [PHD2 Listener Thread] PHD2: Settle done received: GOOD
[02/27/19 21:21:53.461][DEBUG] [Sequence Thread] EventMarker 15 - t:m81 (1); e:0; f:30; o:
[02/27/19 21:21:53.464][DEBUG] [Sequence Thread] Waking from exposure time sleep period...
[02/27/19 21:21:53.465][DEBUG] [Sequence Thread] Checking to see if the CCD has a temp...
[02/27/19 21:21:53.465][DEBUG] [Sequence Thread] Saving the CCD temp...
[02/27/19 21:21:53.469][DEBUG] [Sequence Thread] Entering super dangerous loop to await image completion...
[02/27/19 21:21:53.471][DEBUG] [Sequence Thread] EventMarker 16 - t:m81 (1); e:0; f:30; o:
[02/27/19 21:21:54.312][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE complete...
[02/27/19 21:21:54.475][DEBUG] [Sequence Thread] EventMarker 17 - t:m81 (1); e:0; f:30; o:
[02/27/19 21:21:54.475][DEBUG] [Sequence Thread] Image reported as complete.  Continuing...
[02/27/19 21:21:54.476][DEBUG] [Sequence Thread] Collecting FITs headers...
[02/27/19 21:21:54.477][DEBUG] [Sequence Thread] ASCOM Camera: Could not get last exposure start time.  Reported as (unknown)
[02/27/19 21:21:54.477][DEBUG] [Sequence Thread] DATE-LOC time provided by SGPro (failed to retrieve valid entry from camera)...
[02/27/19 21:21:54.478][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info for last solve...
[02/27/19 21:21:54.478][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info from UI...
[02/27/19 21:21:54.479][DEBUG] [Sequence Thread] Clearing timed monitoring events...
[02/27/19 21:21:54.485][DEBUG] [Sequence Thread] Created full file name (file does not exist): C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_212122_frame31_-15C.fit
[02/27/19 21:21:54.485][DEBUG] [Sequence Thread] SaveFileAscom: Start...
[02/27/19 21:21:54.485][DEBUG] [Sequence Thread] SaveFileAscom: Checking image data...
[02/27/19 21:21:54.485][DEBUG] [Sequence Thread] SaveFileAscom: Create normal preview bitmap...
[02/27/19 21:21:54.490][DEBUG] [Sequence Thread] SaveFileAscom: Locking preview bits...
[02/27/19 21:21:54.490][DEBUG] [Sequence Thread] SaveFileAscom: Validating file name...
[02/27/19 21:21:54.490][DEBUG] [Sequence Thread] SaveFileAscom: Starting byte traversal...
[02/27/19 21:21:54.660][DEBUG] [Sequence Thread] SaveFileAscom: Unlocking preview bits...
[02/27/19 21:21:54.660][DEBUG] [Sequence Thread] SaveFileAscom: Saving preview bitmap to disk...
[02/27/19 21:21:54.660][DEBUG] [Sequence Thread] SaveFileBmp16: Locking bitmap for disk write...
[02/27/19 21:21:54.660][DEBUG] [Sequence Thread] SaveFileBmp16: Opening file stream...
[02/27/19 21:21:54.661][DEBUG] [Sequence Thread] SaveFileBmp16: Writing FITS headers...
[02/27/19 21:21:54.661][DEBUG] [Sequence Thread] SaveFileBmp16: Traversing and persisting bitmap data...
[02/27/19 21:21:54.829][DEBUG] [Sequence Thread] SaveFileBmp16: FITS block fill...
[02/27/19 21:21:54.829][DEBUG] [Sequence Thread] SaveFileBmp16: Unlocking bitmap...
[02/27/19 21:21:54.829][DEBUG] [Sequence Thread] SaveFileBmp16: Closing file stream
[02/27/19 21:21:54.833][DEBUG] [Sequence Thread] SaveFileAscom: Displaying image preview in UI...
[02/27/19 21:21:54.833][DEBUG] [Sequence Thread] Internal Interface: Set Preview...
[02/27/19 21:21:54.833][DEBUG] [Sequence Thread] Display image preview using asynch task...
[02/27/19 21:21:55.106][DEBUG] [Main Thread] --> Find stars (normal)
[02/27/19 21:21:55.170][DEBUG] [Main Thread] AF frame was too large... downsample = 0.5...
[02/27/19 21:21:56.678][DEBUG] [Main Thread] Star detection using min star size of 3px...
[02/27/19 21:21:56.678][DEBUG] [Main Thread] Star detection using max star size of 60px...
[02/27/19 21:21:56.720][DEBUG] [Main Thread] Find stars took: 1613 ms...
[02/27/19 21:21:56.720][DEBUG] [Main Thread] Star list contains 198 stars...
[02/27/19 21:21:56.720][DEBUG] [Main Thread] Calculating HFR with sample size: 6
[02/27/19 21:21:57.596][DEBUG] [Sequence Thread] SaveFileAscom: Done
[02/27/19 21:21:57.596][DEBUG] [Sequence Thread] =========== Save file took 3116 ms
[02/27/19 21:21:57.596][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_212122_frame31_-15C.fit" saved.  HFR = 2.63.
[02/27/19 21:21:57.596][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_212122_frame31_-15C.fit" saved.  HFR = 2.63.)...
[02/27/19 21:21:57.605][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:21:57.605][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:0; f:30; o:
[02/27/19 21:21:57.605][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:21:57.605][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:21:57.605][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:21:57.706][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:21:57.706][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:21:57.706][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:0; f:30; o:
[02/27/19 21:21:57.711][DEBUG] [Sequence Thread] EventMarker 18 - t:m81 (1); e:0; f:30; o:
[02/27/19 21:21:57.719][DEBUG] [Sequence Thread] EventMarker 19 - t:m81 (1); e:0; f:31; o:
[02/27/19 21:21:57.719][DEBUG] [Sequence Thread] EventMarker 20 - t:m81 (1); e:0; f:31; o:
[02/27/19 21:21:57.719][DEBUG] [Sequence Thread] Running post event...
[02/27/19 21:21:57.719][DEBUG] [Sequence Thread] EventMarker 21 - t:m81 (1); e:0; f:31; o:
[02/27/19 21:21:57.722][DEBUG] [Sequence Thread] Incremented numComplete (31) for event[0]...
[02/27/19 21:21:57.724][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:21:57.724][DEBUG] [Sequence Thread] Current event[0] frame count: 31/120...
[02/27/19 21:21:57.724][DEBUG] [Sequence Thread] Current event event[0] has remaining frames.  Returning current event.
[02/27/19 21:21:57.724][DEBUG] [Sequence Thread] Checking for auto manual focus (post)...
[02/27/19 21:21:57.733][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:21:57.746][DEBUG] [Sequence Thread] Attempting to move to next event...
[02/27/19 21:21:57.746][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:21:57.746][DEBUG] [Sequence Thread] Current event[0] frame count: 31/120...
[02/27/19 21:21:57.746][DEBUG] [Sequence Thread] Current event event[0] has remaining frames.  Returning current event.
[02/27/19 21:21:57.746][DEBUG] [Sequence Thread] Running pre event...
[02/27/19 21:21:57.769][DEBUG] [Sequence Thread] Current target has end time at 28/02/2019 06:30:00
[02/27/19 21:21:57.769][DEBUG] [Sequence Thread] End time of next frame is at 27/02/2019 21:22:27
[02/27/19 21:21:57.769][DEBUG] [Sequence Thread] Target is still before end time, continuing...
[02/27/19 21:21:57.769][DEBUG] [Sequence Thread] Running capture event...
[02/27/19 21:21:57.771][DEBUG] [Sequence Thread] ------------- Starting capture frame for event[0] -------------
[02/27/19 21:21:57.784][DEBUG] [Sequence Thread] Sending commands...
[02/27/19 21:21:57.785][DEBUG] [Sequence Thread] SetFlatBox: Frame Type is Light
[02/27/19 21:21:57.785][DEBUG] [Sequence Thread] EventMarker 2 - t:m81 (1); e:0; f:31; o:
[02/27/19 21:21:57.785][DEBUG] [Sequence Thread] Checking if Meridian Flip is needed
[02/27/19 21:21:57.785][DEBUG] [Sequence Thread] Telescope is on the West side of the mount
[02/27/19 21:21:57.785][DEBUG] [Sequence Thread] Meridian Flip not needed, Hour Angle < Degrees Past To Flip: -35.8620728267605 < 0
[02/27/19 21:21:57.785][DEBUG] [Sequence Thread] EventMarker 3 - t:m81 (1); e:0; f:31; o:
[02/27/19 21:21:57.785][DEBUG] [Sequence Thread] EventMarker 4 - t:m81 (1); e:0; f:31; o:
[02/27/19 21:21:57.785][DEBUG] [Sequence Thread] Setting filter position 1...
[02/27/19 21:21:57.785][DEBUG] [Sequence Thread] Filter position 1 is already set.  Skipping...
[02/27/19 21:21:57.785][DEBUG] [Sequence Thread] EventMarker 5 - t:m81 (1); e:0; f:31; o:
[02/27/19 21:21:57.785][DEBUG] [Sequence Thread] Checking for auto manual focus (pre)...
[02/27/19 21:21:57.785][DEBUG] [Sequence Thread] EventMarker 6 - t:m81 (1); e:0; f:31; o:
[02/27/19 21:21:57.788][DEBUG] [Sequence Thread] Autoguider will not dither this frame. Total frames is not a modulus of 5
[02/27/19 21:21:57.788][DEBUG] [Sequence Thread] EventMarker 1 - t:m81 (1); e:0; f:31; o:
[02/27/19 21:21:57.788][DEBUG] [Sequence Thread] Created base name for frame capture: m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_212157_frame32_-15C
[02/27/19 21:21:57.788][DEBUG] [Sequence Thread] Created directory for frame capture: C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\
[02/27/19 21:21:57.788][DEBUG] [Sequence Thread] EventMarker 7 - t:m81 (1); e:0; f:31; o:
[02/27/19 21:21:57.788][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:21:57.788][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:0; f:31; o:
[02/27/19 21:21:57.788][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:21:57.788][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:21:57.788][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:21:57.890][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:21:57.890][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:21:57.890][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:0; f:31; o:
[02/27/19 21:21:57.890][DEBUG] [Sequence Thread] {"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}
[02/27/19 21:21:57.890][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}

[02/27/19 21:21:57.890][DEBUG] [Sequence Thread] EventMarker 172 - t:m81 (1); e:0; f:31; o:
[02/27/19 21:21:57.890][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:21:57.890][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:21:57.890][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:21:57.985][DEBUG] [PHD2 Listener Thread] Unknown object from PHD2: {"Event":"SettleBegin","Timestamp":1551302517.934,"Host":"JGL2_2","Inst":1}
[02/27/19 21:21:57.991][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:21:57.991][DEBUG] [Sequence Thread] EventMarker 173 - t:m81 (1); e:0; f:31; o:
[02/27/19 21:21:57.991][DEBUG] [Sequence Thread] User has elected to skip guider settling over time...
[02/27/19 21:21:57.991][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Attempting to settle the auto guider...
[02/27/19 21:21:57.991][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Attempting to settle the auto guider...)...
[02/27/19 21:21:57.991][DEBUG] [Sequence Thread] Waiting for Auto Guider distance to fall below 0.5
[02/27/19 21:21:57.991][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:21:57.991][DEBUG] [Sequence Thread] PHD2 distance request returned 0.3...
[02/27/19 21:21:58.002][DEBUG] [Sequence Thread] Distance is below 0.5, starting timer...
[02/27/19 21:21:58.187][DEBUG] [PHD2 Listener Thread] PHD2: Settle done received: GOOD
[02/27/19 21:21:58.503][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:21:58.503][DEBUG] [Sequence Thread] PHD2 distance request returned 0.3...
[02/27/19 21:21:58.510][DEBUG] [Sequence Thread] Distance stayed below 0.5 for 0 seconds, done settling...
[02/27/19 21:21:58.510][DEBUG] [Sequence Thread] Auto guider has settled...
[02/27/19 21:21:58.511][DEBUG] [Sequence Thread] EventMarker 8 - t:m81 (1); e:0; f:31; o:
[02/27/19 21:21:58.511][DEBUG] [Sequence Thread] EventMarker 9 - t:m81 (1); e:0; f:31; o:
[02/27/19 21:21:58.511][DEBUG] [Sequence Thread] EventMarker 10 - t:m81 (1); e:0; f:31; o:
[02/27/19 21:21:58.511][DEBUG] [Sequence Thread] Finished sending frame capture.  Entering wait mode...
[02/27/19 21:21:58.511][DEBUG] [Sequence Thread] EventMarker 11 - t:m81 (1); e:0; f:31; o:
[02/27/19 21:21:58.511][DEBUG] [Sequence Thread] EventMarker 12 - t:m81 (1); e:0; f:31; o:
[02/27/19 21:21:58.519][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE message received...
[02/27/19 21:21:58.519][DEBUG] [Camera Thread] SetAscomGain to 76
[02/27/19 21:21:58.520][DEBUG] [Camera Thread] Camera gain set to 76
[02/27/19 21:21:58.520][DEBUG] [Camera Thread] SetAscomNormalSpeed... 
[02/27/19 21:21:58.520][DEBUG] [Camera Thread] Cannot set readout speed, not supported by camera...
[02/27/19 21:21:58.815][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Starting integration of m81; Event 1; Frame 32 for 30s...
[02/27/19 21:21:58.816][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Starting integration of m81; Event 1; Frame 32 for 30s...)...
[02/27/19 21:21:58.816][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, TimedError): (2019-02-25) Failure while integrating m81; Event 1; Frame 32 for 30s. Image has not downloaded in alloted time period.
[02/27/19 21:21:58.816][DEBUG] [Sequence Thread] GNS: Sent timed event to GNS...
[02/27/19 21:21:58.819][DEBUG] [Sequence Thread] EventMarker 13 - t:m81 (1); e:0; f:31; o:
[02/27/19 21:22:05.685][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:22:05.703][DEBUG] [MF Update Thread] Performing serialize...
[02/27/19 21:22:28.713][DEBUG] [Sequence Thread] EventMarker 15 - t:m81 (1); e:0; f:31; o:
[02/27/19 21:22:28.716][DEBUG] [Sequence Thread] Waking from exposure time sleep period...
[02/27/19 21:22:28.716][DEBUG] [Sequence Thread] Checking to see if the CCD has a temp...
[02/27/19 21:22:28.716][DEBUG] [Sequence Thread] Saving the CCD temp...
[02/27/19 21:22:28.723][DEBUG] [Sequence Thread] Entering super dangerous loop to await image completion...
[02/27/19 21:22:28.725][DEBUG] [Sequence Thread] EventMarker 16 - t:m81 (1); e:0; f:31; o:
[02/27/19 21:22:29.667][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE complete...
[02/27/19 21:22:29.729][DEBUG] [Sequence Thread] EventMarker 17 - t:m81 (1); e:0; f:31; o:
[02/27/19 21:22:29.729][DEBUG] [Sequence Thread] Image reported as complete.  Continuing...
[02/27/19 21:22:29.729][DEBUG] [Sequence Thread] Collecting FITs headers...
[02/27/19 21:22:29.730][DEBUG] [Sequence Thread] ASCOM Camera: Could not get last exposure start time.  Reported as (unknown)
[02/27/19 21:22:29.730][DEBUG] [Sequence Thread] DATE-LOC time provided by SGPro (failed to retrieve valid entry from camera)...
[02/27/19 21:22:29.732][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info for last solve...
[02/27/19 21:22:29.732][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info from UI...
[02/27/19 21:22:29.732][DEBUG] [Sequence Thread] Clearing timed monitoring events...
[02/27/19 21:22:29.737][DEBUG] [Sequence Thread] Created full file name (file does not exist): C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_212157_frame32_-15C.fit
[02/27/19 21:22:29.737][DEBUG] [Sequence Thread] SaveFileAscom: Start...
[02/27/19 21:22:29.737][DEBUG] [Sequence Thread] SaveFileAscom: Checking image data...
[02/27/19 21:22:29.737][DEBUG] [Sequence Thread] SaveFileAscom: Create normal preview bitmap...
[02/27/19 21:22:29.743][DEBUG] [Sequence Thread] SaveFileAscom: Locking preview bits...
[02/27/19 21:22:29.743][DEBUG] [Sequence Thread] SaveFileAscom: Validating file name...
[02/27/19 21:22:29.743][DEBUG] [Sequence Thread] SaveFileAscom: Starting byte traversal...
[02/27/19 21:22:29.926][DEBUG] [Sequence Thread] SaveFileAscom: Unlocking preview bits...
[02/27/19 21:22:29.926][DEBUG] [Sequence Thread] SaveFileAscom: Saving preview bitmap to disk...
[02/27/19 21:22:29.926][DEBUG] [Sequence Thread] SaveFileBmp16: Locking bitmap for disk write...
[02/27/19 21:22:29.926][DEBUG] [Sequence Thread] SaveFileBmp16: Opening file stream...
[02/27/19 21:22:29.926][DEBUG] [Sequence Thread] SaveFileBmp16: Writing FITS headers...
[02/27/19 21:22:29.927][DEBUG] [Sequence Thread] SaveFileBmp16: Traversing and persisting bitmap data...
[02/27/19 21:22:30.092][DEBUG] [Sequence Thread] SaveFileBmp16: FITS block fill...
[02/27/19 21:22:30.092][DEBUG] [Sequence Thread] SaveFileBmp16: Unlocking bitmap...
[02/27/19 21:22:30.092][DEBUG] [Sequence Thread] SaveFileBmp16: Closing file stream
[02/27/19 21:22:30.096][DEBUG] [Sequence Thread] SaveFileAscom: Displaying image preview in UI...
[02/27/19 21:22:30.096][DEBUG] [Sequence Thread] Internal Interface: Set Preview...
[02/27/19 21:22:30.096][DEBUG] [Sequence Thread] Display image preview using asynch task...
[02/27/19 21:22:30.407][DEBUG] [Main Thread] --> Find stars (normal)
[02/27/19 21:22:30.474][DEBUG] [Main Thread] AF frame was too large... downsample = 0.5...
[02/27/19 21:22:31.975][DEBUG] [Main Thread] Star detection using min star size of 3px...
[02/27/19 21:22:31.975][DEBUG] [Main Thread] Star detection using max star size of 60px...
[02/27/19 21:22:32.019][DEBUG] [Main Thread] Find stars took: 1611 ms...
[02/27/19 21:22:32.019][DEBUG] [Main Thread] Star list contains 206 stars...
[02/27/19 21:22:32.019][DEBUG] [Main Thread] Calculating HFR with sample size: 6
[02/27/19 21:22:32.548][DEBUG] [Sequence Thread] SaveFileAscom: Done
[02/27/19 21:22:32.548][DEBUG] [Sequence Thread] =========== Save file took 2815 ms
[02/27/19 21:22:32.548][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_212157_frame32_-15C.fit" saved.  HFR = 2.57.
[02/27/19 21:22:32.548][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_212157_frame32_-15C.fit" saved.  HFR = 2.57.)...
[02/27/19 21:22:32.553][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:22:32.554][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:0; f:31; o:
[02/27/19 21:22:32.554][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:22:32.554][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:22:32.554][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:22:32.754][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:22:32.754][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:22:32.754][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:0; f:31; o:
[02/27/19 21:22:32.754][DEBUG] [Sequence Thread] EventMarker 18 - t:m81 (1); e:0; f:31; o:
[02/27/19 21:22:32.765][DEBUG] [Sequence Thread] EventMarker 19 - t:m81 (1); e:0; f:32; o:
[02/27/19 21:22:32.765][DEBUG] [Sequence Thread] EventMarker 20 - t:m81 (1); e:0; f:32; o:
[02/27/19 21:22:32.765][DEBUG] [Sequence Thread] Running post event...
[02/27/19 21:22:32.765][DEBUG] [Sequence Thread] EventMarker 21 - t:m81 (1); e:0; f:32; o:
[02/27/19 21:22:32.770][DEBUG] [Sequence Thread] Incremented numComplete (32) for event[0]...
[02/27/19 21:22:32.772][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:22:32.772][DEBUG] [Sequence Thread] Current event[0] frame count: 32/120...
[02/27/19 21:22:32.772][DEBUG] [Sequence Thread] Current event event[0] has remaining frames.  Returning current event.
[02/27/19 21:22:32.772][DEBUG] [Sequence Thread] Checking for auto manual focus (post)...
[02/27/19 21:22:32.772][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:22:32.783][DEBUG] [Sequence Thread] Attempting to move to next event...
[02/27/19 21:22:32.783][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:22:32.783][DEBUG] [Sequence Thread] Current event[0] frame count: 32/120...
[02/27/19 21:22:32.783][DEBUG] [Sequence Thread] Current event event[0] has remaining frames.  Returning current event.
[02/27/19 21:22:32.783][DEBUG] [Sequence Thread] Running pre event...
[02/27/19 21:22:32.796][DEBUG] [Sequence Thread] Current target has end time at 28/02/2019 06:30:00
[02/27/19 21:22:32.796][DEBUG] [Sequence Thread] End time of next frame is at 27/02/2019 21:23:02
[02/27/19 21:22:32.796][DEBUG] [Sequence Thread] Target is still before end time, continuing...
[02/27/19 21:22:32.796][DEBUG] [Sequence Thread] Running capture event...
[02/27/19 21:22:32.798][DEBUG] [Sequence Thread] ------------- Starting capture frame for event[0] -------------
[02/27/19 21:22:32.866][DEBUG] [Sequence Thread] Sending commands...
[02/27/19 21:22:32.866][DEBUG] [Sequence Thread] SetFlatBox: Frame Type is Light
[02/27/19 21:22:32.866][DEBUG] [Sequence Thread] EventMarker 2 - t:m81 (1); e:0; f:32; o:
[02/27/19 21:22:32.866][DEBUG] [Sequence Thread] Checking if Meridian Flip is needed
[02/27/19 21:22:32.866][DEBUG] [Sequence Thread] Telescope is on the West side of the mount
[02/27/19 21:22:32.866][DEBUG] [Sequence Thread] Meridian Flip not needed, Hour Angle < Degrees Past To Flip: -35.7170486650095 < 0
[02/27/19 21:22:32.866][DEBUG] [Sequence Thread] EventMarker 3 - t:m81 (1); e:0; f:32; o:
[02/27/19 21:22:32.866][DEBUG] [Sequence Thread] EventMarker 4 - t:m81 (1); e:0; f:32; o:
[02/27/19 21:22:32.866][DEBUG] [Sequence Thread] Setting filter position 1...
[02/27/19 21:22:32.866][DEBUG] [Sequence Thread] Filter position 1 is already set.  Skipping...
[02/27/19 21:22:32.866][DEBUG] [Sequence Thread] EventMarker 5 - t:m81 (1); e:0; f:32; o:
[02/27/19 21:22:32.866][DEBUG] [Sequence Thread] Checking for auto manual focus (pre)...
[02/27/19 21:22:32.866][DEBUG] [Sequence Thread] EventMarker 6 - t:m81 (1); e:0; f:32; o:
[02/27/19 21:22:32.885][DEBUG] [Sequence Thread] Autoguider will not dither this frame. Total frames is not a modulus of 5
[02/27/19 21:22:32.885][DEBUG] [Sequence Thread] EventMarker 1 - t:m81 (1); e:0; f:32; o:
[02/27/19 21:22:32.886][DEBUG] [Sequence Thread] Created base name for frame capture: m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_212232_frame33_-15C
[02/27/19 21:22:32.886][DEBUG] [Sequence Thread] Created directory for frame capture: C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\
[02/27/19 21:22:32.886][DEBUG] [Sequence Thread] EventMarker 7 - t:m81 (1); e:0; f:32; o:
[02/27/19 21:22:32.886][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:22:32.886][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:0; f:32; o:
[02/27/19 21:22:32.886][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:22:32.886][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:22:32.886][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:22:32.986][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:22:32.986][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:22:32.986][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:0; f:32; o:
[02/27/19 21:22:32.987][DEBUG] [Sequence Thread] {"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}
[02/27/19 21:22:32.987][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}

[02/27/19 21:22:32.987][DEBUG] [Sequence Thread] EventMarker 172 - t:m81 (1); e:0; f:32; o:
[02/27/19 21:22:32.987][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:22:32.987][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:22:32.987][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:22:33.076][DEBUG] [PHD2 Listener Thread] Unknown object from PHD2: {"Event":"SettleBegin","Timestamp":1551302553.026,"Host":"JGL2_2","Inst":1}
[02/27/19 21:22:33.087][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:22:33.087][DEBUG] [Sequence Thread] EventMarker 173 - t:m81 (1); e:0; f:32; o:
[02/27/19 21:22:33.087][DEBUG] [Sequence Thread] User has elected to skip guider settling over time...
[02/27/19 21:22:33.087][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Attempting to settle the auto guider...
[02/27/19 21:22:33.087][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Attempting to settle the auto guider...)...
[02/27/19 21:22:33.087][DEBUG] [Sequence Thread] Waiting for Auto Guider distance to fall below 0.5
[02/27/19 21:22:33.087][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:22:33.087][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:22:33.099][DEBUG] [Sequence Thread] Distance is below 0.5, starting timer...
[02/27/19 21:22:33.599][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:22:33.599][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:22:34.022][DEBUG] [Sequence Thread] Distance stayed below 0.5 for 0 seconds, done settling...
[02/27/19 21:22:34.024][DEBUG] [Sequence Thread] Auto guider has settled...
[02/27/19 21:22:34.024][DEBUG] [Sequence Thread] EventMarker 8 - t:m81 (1); e:0; f:32; o:
[02/27/19 21:22:34.024][DEBUG] [Sequence Thread] EventMarker 9 - t:m81 (1); e:0; f:32; o:
[02/27/19 21:22:34.024][DEBUG] [Sequence Thread] EventMarker 10 - t:m81 (1); e:0; f:32; o:
[02/27/19 21:22:34.024][DEBUG] [Sequence Thread] Finished sending frame capture.  Entering wait mode...
[02/27/19 21:22:34.024][DEBUG] [Sequence Thread] EventMarker 11 - t:m81 (1); e:0; f:32; o:
[02/27/19 21:22:34.024][DEBUG] [Sequence Thread] EventMarker 12 - t:m81 (1); e:0; f:32; o:
[02/27/19 21:22:34.028][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Starting integration of m81; Event 1; Frame 33 for 30s...
[02/27/19 21:22:34.028][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Starting integration of m81; Event 1; Frame 33 for 30s...)...
[02/27/19 21:22:34.028][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, TimedError): (2019-02-25) Failure while integrating m81; Event 1; Frame 33 for 30s. Image has not downloaded in alloted time period.
[02/27/19 21:22:34.028][DEBUG] [Sequence Thread] GNS: Sent timed event to GNS...
[02/27/19 21:22:34.030][DEBUG] [Sequence Thread] EventMarker 13 - t:m81 (1); e:0; f:32; o:
[02/27/19 21:22:34.033][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE message received...
[02/27/19 21:22:34.033][DEBUG] [Camera Thread] SetAscomGain to 76
[02/27/19 21:22:34.034][DEBUG] [Camera Thread] Camera gain set to 76
[02/27/19 21:22:34.034][DEBUG] [Camera Thread] SetAscomNormalSpeed... 
[02/27/19 21:22:34.034][DEBUG] [Camera Thread] Cannot set readout speed, not supported by camera...
[02/27/19 21:22:34.187][DEBUG] [PHD2 Listener Thread] PHD2: Settle done received: GOOD
[02/27/19 21:23:04.276][DEBUG] [Sequence Thread] EventMarker 15 - t:m81 (1); e:0; f:32; o:
[02/27/19 21:23:04.288][DEBUG] [Sequence Thread] Waking from exposure time sleep period...
[02/27/19 21:23:04.288][DEBUG] [Sequence Thread] Checking to see if the CCD has a temp...
[02/27/19 21:23:04.288][DEBUG] [Sequence Thread] Saving the CCD temp...
[02/27/19 21:23:04.300][DEBUG] [Sequence Thread] Entering super dangerous loop to await image completion...
[02/27/19 21:23:04.303][DEBUG] [Sequence Thread] EventMarker 16 - t:m81 (1); e:0; f:32; o:
[02/27/19 21:23:05.225][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE complete...
[02/27/19 21:23:05.307][DEBUG] [Sequence Thread] EventMarker 17 - t:m81 (1); e:0; f:32; o:
[02/27/19 21:23:05.307][DEBUG] [Sequence Thread] Image reported as complete.  Continuing...
[02/27/19 21:23:05.307][DEBUG] [Sequence Thread] Collecting FITs headers...
[02/27/19 21:23:05.308][DEBUG] [Sequence Thread] ASCOM Camera: Could not get last exposure start time.  Reported as (unknown)
[02/27/19 21:23:05.308][DEBUG] [Sequence Thread] DATE-LOC time provided by SGPro (failed to retrieve valid entry from camera)...
[02/27/19 21:23:05.309][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info for last solve...
[02/27/19 21:23:05.309][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info from UI...
[02/27/19 21:23:05.309][DEBUG] [Sequence Thread] Clearing timed monitoring events...
[02/27/19 21:23:05.316][DEBUG] [Sequence Thread] Created full file name (file does not exist): C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_212232_frame33_-15C.fit
[02/27/19 21:23:05.316][DEBUG] [Sequence Thread] SaveFileAscom: Start...
[02/27/19 21:23:05.316][DEBUG] [Sequence Thread] SaveFileAscom: Checking image data...
[02/27/19 21:23:05.316][DEBUG] [Sequence Thread] SaveFileAscom: Create normal preview bitmap...
[02/27/19 21:23:05.325][DEBUG] [Sequence Thread] SaveFileAscom: Locking preview bits...
[02/27/19 21:23:05.325][DEBUG] [Sequence Thread] SaveFileAscom: Validating file name...
[02/27/19 21:23:05.325][DEBUG] [Sequence Thread] SaveFileAscom: Starting byte traversal...
[02/27/19 21:23:05.494][DEBUG] [Sequence Thread] SaveFileAscom: Unlocking preview bits...
[02/27/19 21:23:05.494][DEBUG] [Sequence Thread] SaveFileAscom: Saving preview bitmap to disk...
[02/27/19 21:23:05.494][DEBUG] [Sequence Thread] SaveFileBmp16: Locking bitmap for disk write...
[02/27/19 21:23:05.494][DEBUG] [Sequence Thread] SaveFileBmp16: Opening file stream...
[02/27/19 21:23:05.494][DEBUG] [Sequence Thread] SaveFileBmp16: Writing FITS headers...
[02/27/19 21:23:05.495][DEBUG] [Sequence Thread] SaveFileBmp16: Traversing and persisting bitmap data...
[02/27/19 21:23:05.650][DEBUG] [Sequence Thread] SaveFileBmp16: FITS block fill...
[02/27/19 21:23:05.650][DEBUG] [Sequence Thread] SaveFileBmp16: Unlocking bitmap...
[02/27/19 21:23:05.650][DEBUG] [Sequence Thread] SaveFileBmp16: Closing file stream
[02/27/19 21:23:05.654][DEBUG] [Sequence Thread] SaveFileAscom: Displaying image preview in UI...
[02/27/19 21:23:05.654][DEBUG] [Sequence Thread] Internal Interface: Set Preview...
[02/27/19 21:23:05.654][DEBUG] [Sequence Thread] Display image preview using asynch task...
[02/27/19 21:23:06.131][DEBUG] [Main Thread] --> Find stars (normal)
[02/27/19 21:23:06.227][DEBUG] [Main Thread] AF frame was too large... downsample = 0.5...
[02/27/19 21:23:07.890][DEBUG] [Main Thread] Star detection using min star size of 3px...
[02/27/19 21:23:07.890][DEBUG] [Main Thread] Star detection using max star size of 60px...
[02/27/19 21:23:07.934][DEBUG] [Main Thread] Find stars took: 1803 ms...
[02/27/19 21:23:07.934][DEBUG] [Main Thread] Star list contains 200 stars...
[02/27/19 21:23:07.934][DEBUG] [Main Thread] Calculating HFR with sample size: 6
[02/27/19 21:23:08.625][DEBUG] [Sequence Thread] SaveFileAscom: Done
[02/27/19 21:23:08.625][DEBUG] [Sequence Thread] =========== Save file took 3315 ms
[02/27/19 21:23:08.625][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_212232_frame33_-15C.fit" saved.  HFR = 2.61.
[02/27/19 21:23:08.625][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_212232_frame33_-15C.fit" saved.  HFR = 2.61.)...
[02/27/19 21:23:08.630][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:23:08.630][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:0; f:32; o:
[02/27/19 21:23:08.630][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:23:08.631][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:23:08.631][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:23:08.732][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:23:08.732][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:23:08.732][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:0; f:32; o:
[02/27/19 21:23:08.732][DEBUG] [Sequence Thread] EventMarker 18 - t:m81 (1); e:0; f:32; o:
[02/27/19 21:23:08.739][DEBUG] [Sequence Thread] EventMarker 19 - t:m81 (1); e:0; f:33; o:
[02/27/19 21:23:08.739][DEBUG] [Sequence Thread] EventMarker 20 - t:m81 (1); e:0; f:33; o:
[02/27/19 21:23:08.739][DEBUG] [Sequence Thread] Running post event...
[02/27/19 21:23:08.739][DEBUG] [Sequence Thread] EventMarker 21 - t:m81 (1); e:0; f:33; o:
[02/27/19 21:23:08.745][DEBUG] [Sequence Thread] Incremented numComplete (33) for event[0]...
[02/27/19 21:23:08.771][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:23:08.771][DEBUG] [Sequence Thread] Current event[0] frame count: 33/120...
[02/27/19 21:23:08.771][DEBUG] [Sequence Thread] Current event event[0] has remaining frames.  Returning current event.
[02/27/19 21:23:08.771][DEBUG] [Sequence Thread] Checking for auto manual focus (post)...
[02/27/19 21:23:08.771][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:23:08.785][DEBUG] [Sequence Thread] Attempting to move to next event...
[02/27/19 21:23:08.785][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:23:08.785][DEBUG] [Sequence Thread] Current event[0] frame count: 33/120...
[02/27/19 21:23:08.785][DEBUG] [Sequence Thread] Current event event[0] has remaining frames.  Returning current event.
[02/27/19 21:23:08.785][DEBUG] [Sequence Thread] Running pre event...
[02/27/19 21:23:08.990][DEBUG] [Sequence Thread] Current target has end time at 28/02/2019 06:30:00
[02/27/19 21:23:08.990][DEBUG] [Sequence Thread] End time of next frame is at 27/02/2019 21:23:38
[02/27/19 21:23:08.990][DEBUG] [Sequence Thread] Target is still before end time, continuing...
[02/27/19 21:23:08.990][DEBUG] [Sequence Thread] Running capture event...
[02/27/19 21:23:08.996][DEBUG] [Sequence Thread] ------------- Starting capture frame for event[0] -------------
[02/27/19 21:23:09.052][DEBUG] [Sequence Thread] Sending commands...
[02/27/19 21:23:09.052][DEBUG] [Sequence Thread] SetFlatBox: Frame Type is Light
[02/27/19 21:23:09.052][DEBUG] [Sequence Thread] EventMarker 2 - t:m81 (1); e:0; f:33; o:
[02/27/19 21:23:09.052][DEBUG] [Sequence Thread] Checking if Meridian Flip is needed
[02/27/19 21:23:09.052][DEBUG] [Sequence Thread] Telescope is on the West side of the mount
[02/27/19 21:23:09.052][DEBUG] [Sequence Thread] Meridian Flip not needed, Hour Angle < Degrees Past To Flip: -35.5676379499845 < 0
[02/27/19 21:23:09.052][DEBUG] [Sequence Thread] EventMarker 3 - t:m81 (1); e:0; f:33; o:
[02/27/19 21:23:09.053][DEBUG] [Sequence Thread] EventMarker 4 - t:m81 (1); e:0; f:33; o:
[02/27/19 21:23:09.053][DEBUG] [Sequence Thread] Setting filter position 1...
[02/27/19 21:23:09.053][DEBUG] [Sequence Thread] Filter position 1 is already set.  Skipping...
[02/27/19 21:23:09.053][DEBUG] [Sequence Thread] EventMarker 5 - t:m81 (1); e:0; f:33; o:
[02/27/19 21:23:09.053][DEBUG] [Sequence Thread] Checking for auto manual focus (pre)...
[02/27/19 21:23:09.053][DEBUG] [Sequence Thread] EventMarker 6 - t:m81 (1); e:0; f:33; o:
[02/27/19 21:23:09.057][DEBUG] [Sequence Thread] Autoguider will not dither this frame. Total frames is not a modulus of 5
[02/27/19 21:23:09.057][DEBUG] [Sequence Thread] EventMarker 1 - t:m81 (1); e:0; f:33; o:
[02/27/19 21:23:09.059][DEBUG] [Sequence Thread] Created base name for frame capture: m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_212309_frame34_-15C
[02/27/19 21:23:09.059][DEBUG] [Sequence Thread] Created directory for frame capture: C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\
[02/27/19 21:23:09.059][DEBUG] [Sequence Thread] EventMarker 7 - t:m81 (1); e:0; f:33; o:
[02/27/19 21:23:09.059][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:23:09.059][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:0; f:33; o:
[02/27/19 21:23:09.059][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:23:09.059][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:23:09.059][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:23:09.160][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:23:09.160][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:23:09.160][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:0; f:33; o:
[02/27/19 21:23:09.160][DEBUG] [Sequence Thread] {"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}
[02/27/19 21:23:09.160][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}

[02/27/19 21:23:09.160][DEBUG] [Sequence Thread] EventMarker 172 - t:m81 (1); e:0; f:33; o:
[02/27/19 21:23:09.160][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:23:09.160][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:23:09.160][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:23:09.216][DEBUG] [PHD2 Listener Thread] Unknown object from PHD2: {"Event":"SettleBegin","Timestamp":1551302589.166,"Host":"JGL2_2","Inst":1}
[02/27/19 21:23:09.261][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:23:09.261][DEBUG] [Sequence Thread] EventMarker 173 - t:m81 (1); e:0; f:33; o:
[02/27/19 21:23:09.262][DEBUG] [Sequence Thread] User has elected to skip guider settling over time...
[02/27/19 21:23:09.262][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Attempting to settle the auto guider...
[02/27/19 21:23:09.262][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Attempting to settle the auto guider...)...
[02/27/19 21:23:09.262][DEBUG] [Sequence Thread] Waiting for Auto Guider distance to fall below 0.5
[02/27/19 21:23:09.262][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:23:09.262][DEBUG] [Sequence Thread] PHD2 distance request returned 0.2...
[02/27/19 21:23:09.268][DEBUG] [Sequence Thread] Distance is below 0.5, starting timer...
[02/27/19 21:23:09.769][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:23:09.769][DEBUG] [Sequence Thread] PHD2 distance request returned 0.2...
[02/27/19 21:23:09.777][DEBUG] [Sequence Thread] Distance stayed below 0.5 for 0 seconds, done settling...
[02/27/19 21:23:09.778][DEBUG] [Sequence Thread] Auto guider has settled...
[02/27/19 21:23:09.778][DEBUG] [Sequence Thread] EventMarker 8 - t:m81 (1); e:0; f:33; o:
[02/27/19 21:23:09.778][DEBUG] [Sequence Thread] EventMarker 9 - t:m81 (1); e:0; f:33; o:
[02/27/19 21:23:09.778][DEBUG] [Sequence Thread] EventMarker 10 - t:m81 (1); e:0; f:33; o:
[02/27/19 21:23:09.778][DEBUG] [Sequence Thread] Finished sending frame capture.  Entering wait mode...
[02/27/19 21:23:09.778][DEBUG] [Sequence Thread] EventMarker 11 - t:m81 (1); e:0; f:33; o:
[02/27/19 21:23:09.778][DEBUG] [Sequence Thread] EventMarker 12 - t:m81 (1); e:0; f:33; o:
[02/27/19 21:23:09.779][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE message received...
[02/27/19 21:23:09.780][DEBUG] [Camera Thread] SetAscomGain to 76
[02/27/19 21:23:09.781][DEBUG] [Camera Thread] Camera gain set to 76
[02/27/19 21:23:09.781][DEBUG] [Camera Thread] SetAscomNormalSpeed... 
[02/27/19 21:23:09.781][DEBUG] [Camera Thread] Cannot set readout speed, not supported by camera...
[02/27/19 21:23:09.784][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Starting integration of m81; Event 1; Frame 34 for 30s...
[02/27/19 21:23:09.784][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Starting integration of m81; Event 1; Frame 34 for 30s...)...
[02/27/19 21:23:09.784][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, TimedError): (2019-02-25) Failure while integrating m81; Event 1; Frame 34 for 30s. Image has not downloaded in alloted time period.
[02/27/19 21:23:09.784][DEBUG] [Sequence Thread] GNS: Sent timed event to GNS...
[02/27/19 21:23:09.786][DEBUG] [Sequence Thread] EventMarker 13 - t:m81 (1); e:0; f:33; o:
[02/27/19 21:23:10.181][DEBUG] [PHD2 Listener Thread] PHD2: Settle done received: GOOD
[02/27/19 21:23:33.840][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:23:33.857][DEBUG] [MF Update Thread] Performing serialize...
[02/27/19 21:23:39.839][DEBUG] [Sequence Thread] EventMarker 15 - t:m81 (1); e:0; f:33; o:
[02/27/19 21:23:39.842][DEBUG] [Sequence Thread] Waking from exposure time sleep period...
[02/27/19 21:23:39.842][DEBUG] [Sequence Thread] Checking to see if the CCD has a temp...
[02/27/19 21:23:39.842][DEBUG] [Sequence Thread] Saving the CCD temp...
[02/27/19 21:23:39.848][DEBUG] [Sequence Thread] Entering super dangerous loop to await image completion...
[02/27/19 21:23:39.850][DEBUG] [Sequence Thread] EventMarker 16 - t:m81 (1); e:0; f:33; o:
[02/27/19 21:23:42.938][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE complete...
[02/27/19 21:23:43.363][DEBUG] [Sequence Thread] EventMarker 17 - t:m81 (1); e:0; f:33; o:
[02/27/19 21:23:43.363][DEBUG] [Sequence Thread] Image reported as complete.  Continuing...
[02/27/19 21:23:43.364][DEBUG] [Sequence Thread] Collecting FITs headers...
[02/27/19 21:23:43.365][DEBUG] [Sequence Thread] ASCOM Camera: Could not get last exposure start time.  Reported as (unknown)
[02/27/19 21:23:43.365][DEBUG] [Sequence Thread] DATE-LOC time provided by SGPro (failed to retrieve valid entry from camera)...
[02/27/19 21:23:43.366][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info for last solve...
[02/27/19 21:23:43.366][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info from UI...
[02/27/19 21:23:43.367][DEBUG] [Sequence Thread] Clearing timed monitoring events...
[02/27/19 21:23:43.373][DEBUG] [Sequence Thread] Created full file name (file does not exist): C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_212309_frame34_-15C.fit
[02/27/19 21:23:43.373][DEBUG] [Sequence Thread] SaveFileAscom: Start...
[02/27/19 21:23:43.373][DEBUG] [Sequence Thread] SaveFileAscom: Checking image data...
[02/27/19 21:23:43.373][DEBUG] [Sequence Thread] SaveFileAscom: Create normal preview bitmap...
[02/27/19 21:23:43.379][DEBUG] [Sequence Thread] SaveFileAscom: Locking preview bits...
[02/27/19 21:23:43.379][DEBUG] [Sequence Thread] SaveFileAscom: Validating file name...
[02/27/19 21:23:43.379][DEBUG] [Sequence Thread] SaveFileAscom: Starting byte traversal...
[02/27/19 21:23:43.560][DEBUG] [Sequence Thread] SaveFileAscom: Unlocking preview bits...
[02/27/19 21:23:43.560][DEBUG] [Sequence Thread] SaveFileAscom: Saving preview bitmap to disk...
[02/27/19 21:23:43.560][DEBUG] [Sequence Thread] SaveFileBmp16: Locking bitmap for disk write...
[02/27/19 21:23:43.560][DEBUG] [Sequence Thread] SaveFileBmp16: Opening file stream...
[02/27/19 21:23:43.560][DEBUG] [Sequence Thread] SaveFileBmp16: Writing FITS headers...
[02/27/19 21:23:43.561][DEBUG] [Sequence Thread] SaveFileBmp16: Traversing and persisting bitmap data...
[02/27/19 21:23:43.711][DEBUG] [Sequence Thread] SaveFileBmp16: FITS block fill...
[02/27/19 21:23:43.711][DEBUG] [Sequence Thread] SaveFileBmp16: Unlocking bitmap...
[02/27/19 21:23:43.711][DEBUG] [Sequence Thread] SaveFileBmp16: Closing file stream
[02/27/19 21:23:43.715][DEBUG] [Sequence Thread] SaveFileAscom: Displaying image preview in UI...
[02/27/19 21:23:43.715][DEBUG] [Sequence Thread] Internal Interface: Set Preview...
[02/27/19 21:23:43.715][DEBUG] [Sequence Thread] Display image preview using asynch task...
[02/27/19 21:23:45.122][DEBUG] [Sequence Thread] SaveFileAscom: Done
[02/27/19 21:23:45.122][DEBUG] [Sequence Thread] =========== Save file took 1755 ms
[02/27/19 21:23:45.122][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_212309_frame34_-15C.fit" saved.  HFR = 2.61.
[02/27/19 21:23:45.122][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_212309_frame34_-15C.fit" saved.  HFR = 2.61.)...
[02/27/19 21:23:45.140][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:23:45.140][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:0; f:33; o:
[02/27/19 21:23:45.140][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:23:45.140][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:23:45.141][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:23:45.341][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:23:45.341][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:23:45.341][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:0; f:33; o:
[02/27/19 21:23:45.342][DEBUG] [Sequence Thread] EventMarker 18 - t:m81 (1); e:0; f:33; o:
[02/27/19 21:23:45.352][DEBUG] [Sequence Thread] EventMarker 19 - t:m81 (1); e:0; f:34; o:
[02/27/19 21:23:45.352][DEBUG] [Sequence Thread] EventMarker 20 - t:m81 (1); e:0; f:34; o:
[02/27/19 21:23:45.352][DEBUG] [Sequence Thread] Running post event...
[02/27/19 21:23:45.352][DEBUG] [Sequence Thread] EventMarker 21 - t:m81 (1); e:0; f:34; o:
[02/27/19 21:23:45.357][DEBUG] [Sequence Thread] Incremented numComplete (34) for event[0]...
[02/27/19 21:23:45.359][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:23:45.359][DEBUG] [Sequence Thread] Current event[0] frame count: 34/120...
[02/27/19 21:23:45.359][DEBUG] [Sequence Thread] Current event event[0] has remaining frames.  Returning current event.
[02/27/19 21:23:45.359][DEBUG] [Sequence Thread] Checking for auto manual focus (post)...
[02/27/19 21:23:45.359][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:23:45.370][DEBUG] [Sequence Thread] Attempting to move to next event...
[02/27/19 21:23:45.370][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:23:45.370][DEBUG] [Sequence Thread] Current event[0] frame count: 34/120...
[02/27/19 21:23:45.370][DEBUG] [Sequence Thread] Current event event[0] has remaining frames.  Returning current event.
[02/27/19 21:23:45.370][DEBUG] [Sequence Thread] Running pre event...
[02/27/19 21:23:45.382][DEBUG] [Sequence Thread] Current target has end time at 28/02/2019 06:30:00
[02/27/19 21:23:45.382][DEBUG] [Sequence Thread] End time of next frame is at 27/02/2019 21:24:15
[02/27/19 21:23:45.382][DEBUG] [Sequence Thread] Target is still before end time, continuing...
[02/27/19 21:23:45.382][DEBUG] [Sequence Thread] Running capture event...
[02/27/19 21:23:45.384][DEBUG] [Sequence Thread] ------------- Starting capture frame for event[0] -------------
[02/27/19 21:23:45.395][DEBUG] [Sequence Thread] Sending commands...
[02/27/19 21:23:45.395][DEBUG] [Sequence Thread] SetFlatBox: Frame Type is Light
[02/27/19 21:23:45.395][DEBUG] [Sequence Thread] EventMarker 2 - t:m81 (1); e:0; f:34; o:
[02/27/19 21:23:45.395][DEBUG] [Sequence Thread] Checking if Meridian Flip is needed
[02/27/19 21:23:45.395][DEBUG] [Sequence Thread] Telescope is on the West side of the mount
[02/27/19 21:23:45.395][DEBUG] [Sequence Thread] Meridian Flip not needed, Hour Angle < Degrees Past To Flip: -35.4170605678272 < 0
[02/27/19 21:23:45.395][DEBUG] [Sequence Thread] EventMarker 3 - t:m81 (1); e:0; f:34; o:
[02/27/19 21:23:45.395][DEBUG] [Sequence Thread] EventMarker 4 - t:m81 (1); e:0; f:34; o:
[02/27/19 21:23:45.395][DEBUG] [Sequence Thread] Setting filter position 1...
[02/27/19 21:23:45.395][DEBUG] [Sequence Thread] Filter position 1 is already set.  Skipping...
[02/27/19 21:23:45.395][DEBUG] [Sequence Thread] EventMarker 5 - t:m81 (1); e:0; f:34; o:
[02/27/19 21:23:45.395][DEBUG] [Sequence Thread] Checking for auto manual focus (pre)...
[02/27/19 21:23:45.395][DEBUG] [Sequence Thread] EventMarker 6 - t:m81 (1); e:0; f:34; o:
[02/27/19 21:23:45.404][DEBUG] [Sequence Thread] Running dither...
[02/27/19 21:23:45.413][DEBUG] [Sequence Thread] PHD2 dither request: 1...
[02/27/19 21:23:45.413][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:23:45.413][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:23:45.413][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:23:45.513][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:23:46.514][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:23:46.514][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:23:46.514][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:23:46.614][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:23:47.615][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:23:47.615][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:23:47.615][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:23:47.715][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:23:48.716][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:23:48.716][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:23:48.716][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:23:48.817][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:23:49.817][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:23:49.817][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:23:49.817][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:23:49.918][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:23:49.918][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:23:49.918][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:23:49.918][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:23:50.019][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:23:50.019][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "dither", "params": [1, false, {"pixels": 0.5, "time": 0, "timeout": 600}], "id": 1002}

[02/27/19 21:23:50.021][DEBUG] [Sequence Thread] EventMarker 1 - t:m81 (1); e:0; f:34; o:
[02/27/19 21:23:50.023][DEBUG] [Sequence Thread] Created base name for frame capture: m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_212350_frame35_-15C
[02/27/19 21:23:50.024][DEBUG] [Sequence Thread] Created directory for frame capture: C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\
[02/27/19 21:23:50.024][DEBUG] [Sequence Thread] EventMarker 7 - t:m81 (1); e:0; f:34; o:
[02/27/19 21:23:50.024][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:23:50.024][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:0; f:34; o:
[02/27/19 21:23:50.024][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:23:50.024][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:23:50.024][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:23:50.092][DEBUG] [PHD2 Listener Thread] Unknown object from PHD2: {"Event":"SettleBegin","Timestamp":1551302630.049,"Host":"JGL2_2","Inst":1}
[02/27/19 21:23:50.124][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:23:50.124][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:23:50.124][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:0; f:34; o:
[02/27/19 21:23:50.125][DEBUG] [Sequence Thread] {"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}
[02/27/19 21:23:50.125][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}

[02/27/19 21:23:50.125][DEBUG] [Sequence Thread] EventMarker 172 - t:m81 (1); e:0; f:34; o:
[02/27/19 21:23:50.125][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:23:50.125][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:23:50.125][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:23:50.194][DEBUG] [PHD2 Listener Thread] Error received from RPC: Cannot initiate guide while dither is in progress
[02/27/19 21:23:50.226][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:23:50.226][DEBUG] [Sequence Thread] EventMarker 173 - t:m81 (1); e:0; f:34; o:
[02/27/19 21:23:50.227][DEBUG] [Sequence Thread] User has elected to skip guider settling over time...
[02/27/19 21:23:50.227][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Attempting to settle the auto guider...
[02/27/19 21:23:50.227][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Attempting to settle the auto guider...)...
[02/27/19 21:23:50.227][DEBUG] [Sequence Thread] Waiting for Auto Guider distance to fall below 0.5
[02/27/19 21:23:50.227][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:23:50.227][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:23:50.235][DEBUG] [Sequence Thread] Distance is below 0.5, starting timer...
[02/27/19 21:23:50.735][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:23:50.735][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:23:50.868][DEBUG] [Sequence Thread] Distance stayed below 0.5 for 0 seconds, done settling...
[02/27/19 21:23:50.868][DEBUG] [Sequence Thread] Auto guider has settled...
[02/27/19 21:23:50.868][DEBUG] [Sequence Thread] EventMarker 8 - t:m81 (1); e:0; f:34; o:
[02/27/19 21:23:50.868][DEBUG] [Sequence Thread] EventMarker 9 - t:m81 (1); e:0; f:34; o:
[02/27/19 21:23:50.868][DEBUG] [Sequence Thread] EventMarker 10 - t:m81 (1); e:0; f:34; o:
[02/27/19 21:23:50.868][DEBUG] [Sequence Thread] Finished sending frame capture.  Entering wait mode...
[02/27/19 21:23:50.868][DEBUG] [Sequence Thread] EventMarker 11 - t:m81 (1); e:0; f:34; o:
[02/27/19 21:23:50.869][DEBUG] [Sequence Thread] EventMarker 12 - t:m81 (1); e:0; f:34; o:
[02/27/19 21:23:50.872][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Starting integration of m81; Event 1; Frame 35 for 30s...
[02/27/19 21:23:50.872][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Starting integration of m81; Event 1; Frame 35 for 30s...)...
[02/27/19 21:23:50.872][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, TimedError): (2019-02-25) Failure while integrating m81; Event 1; Frame 35 for 30s. Image has not downloaded in alloted time period.
[02/27/19 21:23:50.872][DEBUG] [Sequence Thread] GNS: Sent timed event to GNS...
[02/27/19 21:23:50.874][DEBUG] [Sequence Thread] EventMarker 13 - t:m81 (1); e:0; f:34; o:
[02/27/19 21:23:50.876][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE message received...
[02/27/19 21:23:50.876][DEBUG] [Camera Thread] SetAscomGain to 76
[02/27/19 21:23:50.877][DEBUG] [Camera Thread] Camera gain set to 76
[02/27/19 21:23:50.877][DEBUG] [Camera Thread] SetAscomNormalSpeed... 
[02/27/19 21:23:50.878][DEBUG] [Camera Thread] Cannot set readout speed, not supported by camera...
[02/27/19 21:23:58.175][DEBUG] [PHD2 Listener Thread] PHD2: Settle done received: GOOD
[02/27/19 21:24:20.912][DEBUG] [Sequence Thread] EventMarker 15 - t:m81 (1); e:0; f:34; o:
[02/27/19 21:24:20.916][DEBUG] [Sequence Thread] Waking from exposure time sleep period...
[02/27/19 21:24:20.916][DEBUG] [Sequence Thread] Checking to see if the CCD has a temp...
[02/27/19 21:24:20.916][DEBUG] [Sequence Thread] Saving the CCD temp...
[02/27/19 21:24:20.926][DEBUG] [Sequence Thread] Entering super dangerous loop to await image completion...
[02/27/19 21:24:20.929][DEBUG] [Sequence Thread] EventMarker 16 - t:m81 (1); e:0; f:34; o:
[02/27/19 21:24:53.530][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE complete...
[02/27/19 21:24:53.989][DEBUG] [Sequence Thread] EventMarker 17 - t:m81 (1); e:0; f:34; o:
[02/27/19 21:24:53.989][DEBUG] [Sequence Thread] Image reported as complete.  Continuing...
[02/27/19 21:24:53.989][DEBUG] [Sequence Thread] Collecting FITs headers...
[02/27/19 21:24:53.990][DEBUG] [Sequence Thread] ASCOM Camera: Could not get last exposure start time.  Reported as (unknown)
[02/27/19 21:24:53.990][DEBUG] [Sequence Thread] DATE-LOC time provided by SGPro (failed to retrieve valid entry from camera)...
[02/27/19 21:24:53.991][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info for last solve...
[02/27/19 21:24:53.991][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info from UI...
[02/27/19 21:24:53.993][DEBUG] [Sequence Thread] Clearing timed monitoring events...
[02/27/19 21:24:53.999][DEBUG] [Sequence Thread] Created full file name (file does not exist): C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_212350_frame35_-15C.fit
[02/27/19 21:24:53.999][DEBUG] [Sequence Thread] SaveFileAscom: Start...
[02/27/19 21:24:53.999][DEBUG] [Sequence Thread] SaveFileAscom: Checking image data...
[02/27/19 21:24:53.999][DEBUG] [Sequence Thread] SaveFileAscom: Create normal preview bitmap...
[02/27/19 21:24:54.006][DEBUG] [Sequence Thread] SaveFileAscom: Locking preview bits...
[02/27/19 21:24:54.006][DEBUG] [Sequence Thread] SaveFileAscom: Validating file name...
[02/27/19 21:24:54.006][DEBUG] [Sequence Thread] SaveFileAscom: Starting byte traversal...
[02/27/19 21:24:54.150][DEBUG] [Sequence Thread] SaveFileAscom: Unlocking preview bits...
[02/27/19 21:24:54.150][DEBUG] [Sequence Thread] SaveFileAscom: Saving preview bitmap to disk...
[02/27/19 21:24:54.150][DEBUG] [Sequence Thread] SaveFileBmp16: Locking bitmap for disk write...
[02/27/19 21:24:54.150][DEBUG] [Sequence Thread] SaveFileBmp16: Opening file stream...
[02/27/19 21:24:54.150][DEBUG] [Sequence Thread] SaveFileBmp16: Writing FITS headers...
[02/27/19 21:24:54.150][DEBUG] [Sequence Thread] SaveFileBmp16: Traversing and persisting bitmap data...
[02/27/19 21:24:54.324][DEBUG] [Sequence Thread] SaveFileBmp16: FITS block fill...
[02/27/19 21:24:54.324][DEBUG] [Sequence Thread] SaveFileBmp16: Unlocking bitmap...
[02/27/19 21:24:54.324][DEBUG] [Sequence Thread] SaveFileBmp16: Closing file stream
[02/27/19 21:24:54.328][DEBUG] [Sequence Thread] SaveFileAscom: Displaying image preview in UI...
[02/27/19 21:24:54.328][DEBUG] [Sequence Thread] Internal Interface: Set Preview...
[02/27/19 21:24:54.328][DEBUG] [Sequence Thread] Display image preview using asynch task...
[02/27/19 21:24:55.214][DEBUG] [Sequence Thread] SaveFileAscom: Done
[02/27/19 21:24:55.214][DEBUG] [Sequence Thread] =========== Save file took 1220 ms
[02/27/19 21:24:55.214][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_212350_frame35_-15C.fit" saved.  HFR = 2.61.
[02/27/19 21:24:55.214][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_212350_frame35_-15C.fit" saved.  HFR = 2.61.)...
[02/27/19 21:24:55.219][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:24:55.219][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:0; f:34; o:
[02/27/19 21:24:55.219][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:24:55.219][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:24:55.219][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:24:55.320][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:24:55.320][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:24:55.320][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:0; f:34; o:
[02/27/19 21:24:55.320][DEBUG] [Sequence Thread] EventMarker 18 - t:m81 (1); e:0; f:34; o:
[02/27/19 21:24:55.330][DEBUG] [Sequence Thread] EventMarker 19 - t:m81 (1); e:0; f:35; o:
[02/27/19 21:24:55.330][DEBUG] [Sequence Thread] EventMarker 20 - t:m81 (1); e:0; f:35; o:
[02/27/19 21:24:55.330][DEBUG] [Sequence Thread] Running post event...
[02/27/19 21:24:55.330][DEBUG] [Sequence Thread] EventMarker 21 - t:m81 (1); e:0; f:35; o:
[02/27/19 21:24:55.334][DEBUG] [Sequence Thread] Incremented numComplete (35) for event[0]...
[02/27/19 21:24:55.336][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:24:55.336][DEBUG] [Sequence Thread] Current event[0] frame count: 35/120...
[02/27/19 21:24:55.336][DEBUG] [Sequence Thread] Current event event[0] has remaining frames.  Returning current event.
[02/27/19 21:24:55.336][DEBUG] [Sequence Thread] Checking for auto manual focus (post)...
[02/27/19 21:24:55.336][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:24:55.348][DEBUG] [Sequence Thread] Attempting to move to next event...
[02/27/19 21:24:55.348][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:24:55.348][DEBUG] [Sequence Thread] Current event[0] frame count: 35/120...
[02/27/19 21:24:55.348][DEBUG] [Sequence Thread] Current event event[0] has remaining frames.  Returning current event.
[02/27/19 21:24:55.348][DEBUG] [Sequence Thread] Running pre event...
[02/27/19 21:24:55.363][DEBUG] [Sequence Thread] Current target has end time at 28/02/2019 06:30:00
[02/27/19 21:24:55.363][DEBUG] [Sequence Thread] End time of next frame is at 27/02/2019 21:25:25
[02/27/19 21:24:55.363][DEBUG] [Sequence Thread] Target is still before end time, continuing...
[02/27/19 21:24:55.363][DEBUG] [Sequence Thread] Running capture event...
[02/27/19 21:24:55.364][DEBUG] [Sequence Thread] ------------- Starting capture frame for event[0] -------------
[02/27/19 21:24:55.371][DEBUG] [Sequence Thread] Sending commands...
[02/27/19 21:24:55.371][DEBUG] [Sequence Thread] SetFlatBox: Frame Type is Light
[02/27/19 21:24:55.371][DEBUG] [Sequence Thread] EventMarker 2 - t:m81 (1); e:0; f:35; o:
[02/27/19 21:24:55.371][DEBUG] [Sequence Thread] Checking if Meridian Flip is needed
[02/27/19 21:24:55.371][DEBUG] [Sequence Thread] Telescope is on the West side of the mount
[02/27/19 21:24:55.371][DEBUG] [Sequence Thread] Meridian Flip not needed, Hour Angle < Degrees Past To Flip: -35.1166255234132 < 0
[02/27/19 21:24:55.371][DEBUG] [Sequence Thread] EventMarker 3 - t:m81 (1); e:0; f:35; o:
[02/27/19 21:24:55.371][DEBUG] [Sequence Thread] EventMarker 4 - t:m81 (1); e:0; f:35; o:
[02/27/19 21:24:55.371][DEBUG] [Sequence Thread] Setting filter position 1...
[02/27/19 21:24:55.371][DEBUG] [Sequence Thread] Filter position 1 is already set.  Skipping...
[02/27/19 21:24:55.371][DEBUG] [Sequence Thread] EventMarker 5 - t:m81 (1); e:0; f:35; o:
[02/27/19 21:24:55.371][DEBUG] [Sequence Thread] Checking for auto manual focus (pre)...
[02/27/19 21:24:55.371][DEBUG] [Sequence Thread] EventMarker 6 - t:m81 (1); e:0; f:35; o:
[02/27/19 21:24:55.380][DEBUG] [Sequence Thread] Autoguider will not dither this frame. Total frames is not a modulus of 5
[02/27/19 21:24:55.380][DEBUG] [Sequence Thread] EventMarker 1 - t:m81 (1); e:0; f:35; o:
[02/27/19 21:24:55.381][DEBUG] [Sequence Thread] Created base name for frame capture: m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_212455_frame36_-15C
[02/27/19 21:24:55.381][DEBUG] [Sequence Thread] Created directory for frame capture: C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\
[02/27/19 21:24:55.381][DEBUG] [Sequence Thread] EventMarker 7 - t:m81 (1); e:0; f:35; o:
[02/27/19 21:24:55.381][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:24:55.381][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:0; f:35; o:
[02/27/19 21:24:55.381][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:24:55.381][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:24:55.381][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:24:55.482][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:24:55.482][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:24:55.482][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:0; f:35; o:
[02/27/19 21:24:55.482][DEBUG] [Sequence Thread] {"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}
[02/27/19 21:24:55.482][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}

[02/27/19 21:24:55.482][DEBUG] [Sequence Thread] EventMarker 172 - t:m81 (1); e:0; f:35; o:
[02/27/19 21:24:55.482][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:24:55.482][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:24:55.482][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:24:55.540][DEBUG] [PHD2 Listener Thread] Unknown object from PHD2: {"Event":"SettleBegin","Timestamp":1551302695.490,"Host":"JGL2_2","Inst":1}
[02/27/19 21:24:55.583][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:24:55.583][DEBUG] [Sequence Thread] EventMarker 173 - t:m81 (1); e:0; f:35; o:
[02/27/19 21:24:55.583][DEBUG] [Sequence Thread] User has elected to skip guider settling over time...
[02/27/19 21:24:55.583][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Attempting to settle the auto guider...
[02/27/19 21:24:55.583][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Attempting to settle the auto guider...)...
[02/27/19 21:24:55.583][DEBUG] [Sequence Thread] Waiting for Auto Guider distance to fall below 0.5
[02/27/19 21:24:55.583][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:24:55.583][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:24:55.592][DEBUG] [Sequence Thread] Distance is below 0.5, starting timer...
[02/27/19 21:24:56.093][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:24:56.093][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:24:56.100][DEBUG] [Sequence Thread] Distance stayed below 0.5 for 0 seconds, done settling...
[02/27/19 21:24:56.101][DEBUG] [Sequence Thread] Auto guider has settled...
[02/27/19 21:24:56.101][DEBUG] [Sequence Thread] EventMarker 8 - t:m81 (1); e:0; f:35; o:
[02/27/19 21:24:56.101][DEBUG] [Sequence Thread] EventMarker 9 - t:m81 (1); e:0; f:35; o:
[02/27/19 21:24:56.101][DEBUG] [Sequence Thread] EventMarker 10 - t:m81 (1); e:0; f:35; o:
[02/27/19 21:24:56.101][DEBUG] [Sequence Thread] Finished sending frame capture.  Entering wait mode...
[02/27/19 21:24:56.101][DEBUG] [Sequence Thread] EventMarker 11 - t:m81 (1); e:0; f:35; o:
[02/27/19 21:24:56.101][DEBUG] [Sequence Thread] EventMarker 12 - t:m81 (1); e:0; f:35; o:
[02/27/19 21:24:56.103][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE message received...
[02/27/19 21:24:56.104][DEBUG] [Camera Thread] SetAscomGain to 76
[02/27/19 21:24:56.105][DEBUG] [Camera Thread] Camera gain set to 76
[02/27/19 21:24:56.105][DEBUG] [Camera Thread] SetAscomNormalSpeed... 
[02/27/19 21:24:56.105][DEBUG] [Camera Thread] Cannot set readout speed, not supported by camera...
[02/27/19 21:24:56.107][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Starting integration of m81; Event 1; Frame 36 for 30s...
[02/27/19 21:24:56.107][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Starting integration of m81; Event 1; Frame 36 for 30s...)...
[02/27/19 21:24:56.107][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, TimedError): (2019-02-25) Failure while integrating m81; Event 1; Frame 36 for 30s. Image has not downloaded in alloted time period.
[02/27/19 21:24:56.107][DEBUG] [Sequence Thread] GNS: Sent timed event to GNS...
[02/27/19 21:24:56.109][DEBUG] [Sequence Thread] EventMarker 13 - t:m81 (1); e:0; f:35; o:
[02/27/19 21:24:56.145][DEBUG] [PHD2 Listener Thread] PHD2: Settle done received: GOOD
[02/27/19 21:24:58.522][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:24:58.535][DEBUG] [MF Update Thread] Performing serialize...
[02/27/19 21:25:26.143][DEBUG] [Sequence Thread] EventMarker 15 - t:m81 (1); e:0; f:35; o:
[02/27/19 21:25:26.145][DEBUG] [Sequence Thread] Waking from exposure time sleep period...
[02/27/19 21:25:26.146][DEBUG] [Sequence Thread] Checking to see if the CCD has a temp...
[02/27/19 21:25:26.146][DEBUG] [Sequence Thread] Saving the CCD temp...
[02/27/19 21:25:26.149][DEBUG] [Sequence Thread] Entering super dangerous loop to await image completion...
[02/27/19 21:25:26.151][DEBUG] [Sequence Thread] EventMarker 16 - t:m81 (1); e:0; f:35; o:
[02/27/19 21:25:27.247][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE complete...
[02/27/19 21:25:27.656][DEBUG] [Sequence Thread] EventMarker 17 - t:m81 (1); e:0; f:35; o:
[02/27/19 21:25:27.656][DEBUG] [Sequence Thread] Image reported as complete.  Continuing...
[02/27/19 21:25:27.656][DEBUG] [Sequence Thread] Collecting FITs headers...
[02/27/19 21:25:27.657][DEBUG] [Sequence Thread] ASCOM Camera: Could not get last exposure start time.  Reported as (unknown)
[02/27/19 21:25:27.657][DEBUG] [Sequence Thread] DATE-LOC time provided by SGPro (failed to retrieve valid entry from camera)...
[02/27/19 21:25:27.658][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info for last solve...
[02/27/19 21:25:27.658][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info from UI...
[02/27/19 21:25:27.659][DEBUG] [Sequence Thread] Clearing timed monitoring events...
[02/27/19 21:25:27.666][DEBUG] [Sequence Thread] Created full file name (file does not exist): C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_212455_frame36_-15C.fit
[02/27/19 21:25:27.666][DEBUG] [Sequence Thread] SaveFileAscom: Start...
[02/27/19 21:25:27.666][DEBUG] [Sequence Thread] SaveFileAscom: Checking image data...
[02/27/19 21:25:27.666][DEBUG] [Sequence Thread] SaveFileAscom: Create normal preview bitmap...
[02/27/19 21:25:27.671][DEBUG] [Sequence Thread] SaveFileAscom: Locking preview bits...
[02/27/19 21:25:27.671][DEBUG] [Sequence Thread] SaveFileAscom: Validating file name...
[02/27/19 21:25:27.671][DEBUG] [Sequence Thread] SaveFileAscom: Starting byte traversal...
[02/27/19 21:25:27.848][DEBUG] [Sequence Thread] SaveFileAscom: Unlocking preview bits...
[02/27/19 21:25:27.848][DEBUG] [Sequence Thread] SaveFileAscom: Saving preview bitmap to disk...
[02/27/19 21:25:27.848][DEBUG] [Sequence Thread] SaveFileBmp16: Locking bitmap for disk write...
[02/27/19 21:25:27.848][DEBUG] [Sequence Thread] SaveFileBmp16: Opening file stream...
[02/27/19 21:25:27.848][DEBUG] [Sequence Thread] SaveFileBmp16: Writing FITS headers...
[02/27/19 21:25:27.849][DEBUG] [Sequence Thread] SaveFileBmp16: Traversing and persisting bitmap data...
[02/27/19 21:25:28.019][DEBUG] [Sequence Thread] SaveFileBmp16: FITS block fill...
[02/27/19 21:25:28.019][DEBUG] [Sequence Thread] SaveFileBmp16: Unlocking bitmap...
[02/27/19 21:25:28.019][DEBUG] [Sequence Thread] SaveFileBmp16: Closing file stream
[02/27/19 21:25:28.023][DEBUG] [Sequence Thread] SaveFileAscom: Displaying image preview in UI...
[02/27/19 21:25:28.023][DEBUG] [Sequence Thread] Internal Interface: Set Preview...
[02/27/19 21:25:28.023][DEBUG] [Sequence Thread] Display image preview using asynch task...
[02/27/19 21:25:29.246][DEBUG] [Sequence Thread] SaveFileAscom: Done
[02/27/19 21:25:29.246][DEBUG] [Sequence Thread] =========== Save file took 1586 ms
[02/27/19 21:25:29.246][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_212455_frame36_-15C.fit" saved.  HFR = 2.61.
[02/27/19 21:25:29.246][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_212455_frame36_-15C.fit" saved.  HFR = 2.61.)...
[02/27/19 21:25:29.250][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:25:29.250][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:0; f:35; o:
[02/27/19 21:25:29.250][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:25:29.250][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:25:29.250][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:25:29.351][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:25:29.351][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:25:29.351][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:0; f:35; o:
[02/27/19 21:25:29.358][DEBUG] [Sequence Thread] EventMarker 18 - t:m81 (1); e:0; f:35; o:
[02/27/19 21:25:29.363][DEBUG] [Sequence Thread] EventMarker 19 - t:m81 (1); e:0; f:36; o:
[02/27/19 21:25:29.363][DEBUG] [Sequence Thread] EventMarker 20 - t:m81 (1); e:0; f:36; o:
[02/27/19 21:25:29.363][DEBUG] [Sequence Thread] Running post event...
[02/27/19 21:25:29.363][DEBUG] [Sequence Thread] EventMarker 21 - t:m81 (1); e:0; f:36; o:
[02/27/19 21:25:29.369][DEBUG] [Sequence Thread] Incremented numComplete (36) for event[0]...
[02/27/19 21:25:29.370][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:25:29.370][DEBUG] [Sequence Thread] Current event[0] frame count: 36/120...
[02/27/19 21:25:29.370][DEBUG] [Sequence Thread] Current event event[0] has remaining frames.  Returning current event.
[02/27/19 21:25:29.370][DEBUG] [Sequence Thread] Checking for auto manual focus (post)...
[02/27/19 21:25:29.371][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:25:29.383][DEBUG] [Sequence Thread] Attempting to move to next event...
[02/27/19 21:25:29.383][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:25:29.383][DEBUG] [Sequence Thread] Current event[0] frame count: 36/120...
[02/27/19 21:25:29.383][DEBUG] [Sequence Thread] Current event event[0] has remaining frames.  Returning current event.
[02/27/19 21:25:29.383][DEBUG] [Sequence Thread] Running pre event...
[02/27/19 21:25:29.399][DEBUG] [Sequence Thread] Current target has end time at 28/02/2019 06:30:00
[02/27/19 21:25:29.399][DEBUG] [Sequence Thread] End time of next frame is at 27/02/2019 21:25:59
[02/27/19 21:25:29.399][DEBUG] [Sequence Thread] Target is still before end time, continuing...
[02/27/19 21:25:29.399][DEBUG] [Sequence Thread] Running capture event...
[02/27/19 21:25:29.401][DEBUG] [Sequence Thread] ------------- Starting capture frame for event[0] -------------
[02/27/19 21:25:29.406][DEBUG] [Sequence Thread] Sending commands...
[02/27/19 21:25:29.406][DEBUG] [Sequence Thread] SetFlatBox: Frame Type is Light
[02/27/19 21:25:29.406][DEBUG] [Sequence Thread] EventMarker 2 - t:m81 (1); e:0; f:36; o:
[02/27/19 21:25:29.406][DEBUG] [Sequence Thread] Checking if Meridian Flip is needed
[02/27/19 21:25:29.406][DEBUG] [Sequence Thread] Telescope is on the West side of the mount
[02/27/19 21:25:29.406][DEBUG] [Sequence Thread] Meridian Flip not needed, Hour Angle < Degrees Past To Flip: -34.9744044139646 < 0
[02/27/19 21:25:29.406][DEBUG] [Sequence Thread] EventMarker 3 - t:m81 (1); e:0; f:36; o:
[02/27/19 21:25:29.406][DEBUG] [Sequence Thread] EventMarker 4 - t:m81 (1); e:0; f:36; o:
[02/27/19 21:25:29.406][DEBUG] [Sequence Thread] Setting filter position 1...
[02/27/19 21:25:29.406][DEBUG] [Sequence Thread] Filter position 1 is already set.  Skipping...
[02/27/19 21:25:29.406][DEBUG] [Sequence Thread] EventMarker 5 - t:m81 (1); e:0; f:36; o:
[02/27/19 21:25:29.406][DEBUG] [Sequence Thread] Checking for auto manual focus (pre)...
[02/27/19 21:25:29.406][DEBUG] [Sequence Thread] EventMarker 6 - t:m81 (1); e:0; f:36; o:
[02/27/19 21:25:29.414][DEBUG] [Sequence Thread] Autoguider will not dither this frame. Total frames is not a modulus of 5
[02/27/19 21:25:29.414][DEBUG] [Sequence Thread] EventMarker 1 - t:m81 (1); e:0; f:36; o:
[02/27/19 21:25:29.415][DEBUG] [Sequence Thread] Created base name for frame capture: m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_212529_frame37_-15C
[02/27/19 21:25:29.415][DEBUG] [Sequence Thread] Created directory for frame capture: C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\
[02/27/19 21:25:29.415][DEBUG] [Sequence Thread] EventMarker 7 - t:m81 (1); e:0; f:36; o:
[02/27/19 21:25:29.415][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:25:29.415][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:0; f:36; o:
[02/27/19 21:25:29.415][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:25:29.415][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:25:29.415][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:25:29.516][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:25:29.516][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:25:29.516][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:0; f:36; o:
[02/27/19 21:25:29.516][DEBUG] [Sequence Thread] {"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}
[02/27/19 21:25:29.517][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}

[02/27/19 21:25:29.517][DEBUG] [Sequence Thread] EventMarker 172 - t:m81 (1); e:0; f:36; o:
[02/27/19 21:25:29.517][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:25:29.517][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:25:29.517][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:25:29.612][DEBUG] [PHD2 Listener Thread] Unknown object from PHD2: {"Event":"SettleBegin","Timestamp":1551302729.563,"Host":"JGL2_2","Inst":1}
[02/27/19 21:25:29.617][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:25:29.617][DEBUG] [Sequence Thread] EventMarker 173 - t:m81 (1); e:0; f:36; o:
[02/27/19 21:25:29.617][DEBUG] [Sequence Thread] User has elected to skip guider settling over time...
[02/27/19 21:25:29.617][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Attempting to settle the auto guider...
[02/27/19 21:25:29.617][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Attempting to settle the auto guider...)...
[02/27/19 21:25:29.617][DEBUG] [Sequence Thread] Waiting for Auto Guider distance to fall below 0.5
[02/27/19 21:25:29.617][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:25:29.617][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:25:29.629][DEBUG] [Sequence Thread] Distance is below 0.5, starting timer...
[02/27/19 21:25:30.130][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:25:30.130][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:25:30.170][DEBUG] [PHD2 Listener Thread] PHD2: Settle done received: GOOD
[02/27/19 21:25:30.558][DEBUG] [Sequence Thread] Distance stayed below 0.5 for 0 seconds, done settling...
[02/27/19 21:25:30.559][DEBUG] [Sequence Thread] Auto guider has settled...
[02/27/19 21:25:30.559][DEBUG] [Sequence Thread] EventMarker 8 - t:m81 (1); e:0; f:36; o:
[02/27/19 21:25:30.559][DEBUG] [Sequence Thread] EventMarker 9 - t:m81 (1); e:0; f:36; o:
[02/27/19 21:25:30.559][DEBUG] [Sequence Thread] EventMarker 10 - t:m81 (1); e:0; f:36; o:
[02/27/19 21:25:30.559][DEBUG] [Sequence Thread] Finished sending frame capture.  Entering wait mode...
[02/27/19 21:25:30.559][DEBUG] [Sequence Thread] EventMarker 11 - t:m81 (1); e:0; f:36; o:
[02/27/19 21:25:30.561][DEBUG] [Sequence Thread] EventMarker 12 - t:m81 (1); e:0; f:36; o:
[02/27/19 21:25:30.562][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE message received...
[02/27/19 21:25:30.563][DEBUG] [Camera Thread] SetAscomGain to 76
[02/27/19 21:25:30.564][DEBUG] [Camera Thread] Camera gain set to 76
[02/27/19 21:25:30.564][DEBUG] [Camera Thread] SetAscomNormalSpeed... 
[02/27/19 21:25:30.564][DEBUG] [Camera Thread] Cannot set readout speed, not supported by camera...
[02/27/19 21:25:30.567][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Starting integration of m81; Event 1; Frame 37 for 30s...
[02/27/19 21:25:30.567][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Starting integration of m81; Event 1; Frame 37 for 30s...)...
[02/27/19 21:25:30.567][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, TimedError): (2019-02-25) Failure while integrating m81; Event 1; Frame 37 for 30s. Image has not downloaded in alloted time period.
[02/27/19 21:25:30.567][DEBUG] [Sequence Thread] GNS: Sent timed event to GNS...
[02/27/19 21:25:30.569][DEBUG] [Sequence Thread] EventMarker 13 - t:m81 (1); e:0; f:36; o:
[02/27/19 21:26:00.730][DEBUG] [Sequence Thread] EventMarker 15 - t:m81 (1); e:0; f:36; o:
[02/27/19 21:26:00.734][DEBUG] [Sequence Thread] Waking from exposure time sleep period...
[02/27/19 21:26:00.734][DEBUG] [Sequence Thread] Checking to see if the CCD has a temp...
[02/27/19 21:26:00.734][DEBUG] [Sequence Thread] Saving the CCD temp...
[02/27/19 21:26:00.742][DEBUG] [Sequence Thread] Entering super dangerous loop to await image completion...
[02/27/19 21:26:00.744][DEBUG] [Sequence Thread] EventMarker 16 - t:m81 (1); e:0; f:36; o:
[02/27/19 21:26:01.713][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE complete...
[02/27/19 21:26:01.749][DEBUG] [Sequence Thread] EventMarker 17 - t:m81 (1); e:0; f:36; o:
[02/27/19 21:26:01.749][DEBUG] [Sequence Thread] Image reported as complete.  Continuing...
[02/27/19 21:26:01.749][DEBUG] [Sequence Thread] Collecting FITs headers...
[02/27/19 21:26:01.750][DEBUG] [Sequence Thread] ASCOM Camera: Could not get last exposure start time.  Reported as (unknown)
[02/27/19 21:26:01.750][DEBUG] [Sequence Thread] DATE-LOC time provided by SGPro (failed to retrieve valid entry from camera)...
[02/27/19 21:26:01.750][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info for last solve...
[02/27/19 21:26:01.750][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info from UI...
[02/27/19 21:26:01.750][DEBUG] [Sequence Thread] Clearing timed monitoring events...
[02/27/19 21:26:01.754][DEBUG] [Sequence Thread] Created full file name (file does not exist): C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_212529_frame37_-15C.fit
[02/27/19 21:26:01.754][DEBUG] [Sequence Thread] SaveFileAscom: Start...
[02/27/19 21:26:01.754][DEBUG] [Sequence Thread] SaveFileAscom: Checking image data...
[02/27/19 21:26:01.754][DEBUG] [Sequence Thread] SaveFileAscom: Create normal preview bitmap...
[02/27/19 21:26:01.759][DEBUG] [Sequence Thread] SaveFileAscom: Locking preview bits...
[02/27/19 21:26:01.759][DEBUG] [Sequence Thread] SaveFileAscom: Validating file name...
[02/27/19 21:26:01.759][DEBUG] [Sequence Thread] SaveFileAscom: Starting byte traversal...
[02/27/19 21:26:01.922][DEBUG] [Sequence Thread] SaveFileAscom: Unlocking preview bits...
[02/27/19 21:26:01.922][DEBUG] [Sequence Thread] SaveFileAscom: Saving preview bitmap to disk...
[02/27/19 21:26:01.922][DEBUG] [Sequence Thread] SaveFileBmp16: Locking bitmap for disk write...
[02/27/19 21:26:01.922][DEBUG] [Sequence Thread] SaveFileBmp16: Opening file stream...
[02/27/19 21:26:01.923][DEBUG] [Sequence Thread] SaveFileBmp16: Writing FITS headers...
[02/27/19 21:26:01.923][DEBUG] [Sequence Thread] SaveFileBmp16: Traversing and persisting bitmap data...
[02/27/19 21:26:02.093][DEBUG] [Sequence Thread] SaveFileBmp16: FITS block fill...
[02/27/19 21:26:02.093][DEBUG] [Sequence Thread] SaveFileBmp16: Unlocking bitmap...
[02/27/19 21:26:02.093][DEBUG] [Sequence Thread] SaveFileBmp16: Closing file stream
[02/27/19 21:26:02.098][DEBUG] [Sequence Thread] SaveFileAscom: Displaying image preview in UI...
[02/27/19 21:26:02.098][DEBUG] [Sequence Thread] Internal Interface: Set Preview...
[02/27/19 21:26:02.098][DEBUG] [Sequence Thread] Display image preview using asynch task...
[02/27/19 21:26:02.869][DEBUG] [Sequence Thread] SaveFileAscom: Done
[02/27/19 21:26:02.869][DEBUG] [Sequence Thread] =========== Save file took 1118 ms
[02/27/19 21:26:02.869][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_212529_frame37_-15C.fit" saved.  HFR = 2.61.
[02/27/19 21:26:02.869][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_212529_frame37_-15C.fit" saved.  HFR = 2.61.)...
[02/27/19 21:26:02.872][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:26:02.872][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:0; f:36; o:
[02/27/19 21:26:02.872][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:26:02.872][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:26:02.872][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:26:02.973][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:26:02.973][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:26:02.973][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:0; f:36; o:
[02/27/19 21:26:02.974][DEBUG] [Sequence Thread] EventMarker 18 - t:m81 (1); e:0; f:36; o:
[02/27/19 21:26:02.986][DEBUG] [Sequence Thread] EventMarker 19 - t:m81 (1); e:0; f:37; o:
[02/27/19 21:26:02.986][DEBUG] [Sequence Thread] EventMarker 20 - t:m81 (1); e:0; f:37; o:
[02/27/19 21:26:02.986][DEBUG] [Sequence Thread] Running post event...
[02/27/19 21:26:02.986][DEBUG] [Sequence Thread] EventMarker 21 - t:m81 (1); e:0; f:37; o:
[02/27/19 21:26:02.989][DEBUG] [Sequence Thread] Incremented numComplete (37) for event[0]...
[02/27/19 21:26:02.991][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:26:02.991][DEBUG] [Sequence Thread] Current event[0] frame count: 37/120...
[02/27/19 21:26:02.991][DEBUG] [Sequence Thread] Current event event[0] has remaining frames.  Returning current event.
[02/27/19 21:26:02.991][DEBUG] [Sequence Thread] Checking for auto manual focus (post)...
[02/27/19 21:26:02.991][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:26:03.004][DEBUG] [Sequence Thread] Attempting to move to next event...
[02/27/19 21:26:03.004][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:26:03.004][DEBUG] [Sequence Thread] Current event[0] frame count: 37/120...
[02/27/19 21:26:03.004][DEBUG] [Sequence Thread] Current event event[0] has remaining frames.  Returning current event.
[02/27/19 21:26:03.004][DEBUG] [Sequence Thread] Running pre event...
[02/27/19 21:26:03.039][DEBUG] [Sequence Thread] Current target has end time at 28/02/2019 06:30:00
[02/27/19 21:26:03.039][DEBUG] [Sequence Thread] End time of next frame is at 27/02/2019 21:26:33
[02/27/19 21:26:03.039][DEBUG] [Sequence Thread] Target is still before end time, continuing...
[02/27/19 21:26:03.039][DEBUG] [Sequence Thread] Running capture event...
[02/27/19 21:26:03.041][DEBUG] [Sequence Thread] ------------- Starting capture frame for event[0] -------------
[02/27/19 21:26:03.049][DEBUG] [Sequence Thread] Sending commands...
[02/27/19 21:26:03.049][DEBUG] [Sequence Thread] SetFlatBox: Frame Type is Light
[02/27/19 21:26:03.049][DEBUG] [Sequence Thread] EventMarker 2 - t:m81 (1); e:0; f:37; o:
[02/27/19 21:26:03.049][DEBUG] [Sequence Thread] Checking if Meridian Flip is needed
[02/27/19 21:26:03.049][DEBUG] [Sequence Thread] Telescope is on the West side of the mount
[02/27/19 21:26:03.049][DEBUG] [Sequence Thread] Meridian Flip not needed, Hour Angle < Degrees Past To Flip: -34.8366111887147 < 0
[02/27/19 21:26:03.049][DEBUG] [Sequence Thread] EventMarker 3 - t:m81 (1); e:0; f:37; o:
[02/27/19 21:26:03.049][DEBUG] [Sequence Thread] EventMarker 4 - t:m81 (1); e:0; f:37; o:
[02/27/19 21:26:03.049][DEBUG] [Sequence Thread] Setting filter position 1...
[02/27/19 21:26:03.049][DEBUG] [Sequence Thread] Filter position 1 is already set.  Skipping...
[02/27/19 21:26:03.049][DEBUG] [Sequence Thread] EventMarker 5 - t:m81 (1); e:0; f:37; o:
[02/27/19 21:26:03.049][DEBUG] [Sequence Thread] Checking for auto manual focus (pre)...
[02/27/19 21:26:03.049][DEBUG] [Sequence Thread] EventMarker 6 - t:m81 (1); e:0; f:37; o:
[02/27/19 21:26:03.058][DEBUG] [Sequence Thread] Autoguider will not dither this frame. Total frames is not a modulus of 5
[02/27/19 21:26:03.058][DEBUG] [Sequence Thread] EventMarker 1 - t:m81 (1); e:0; f:37; o:
[02/27/19 21:26:03.059][DEBUG] [Sequence Thread] Created base name for frame capture: m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_212603_frame38_-15C
[02/27/19 21:26:03.059][DEBUG] [Sequence Thread] Created directory for frame capture: C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\
[02/27/19 21:26:03.059][DEBUG] [Sequence Thread] EventMarker 7 - t:m81 (1); e:0; f:37; o:
[02/27/19 21:26:03.059][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:26:03.059][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:0; f:37; o:
[02/27/19 21:26:03.059][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:26:03.059][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:26:03.059][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:26:03.159][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:26:03.159][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:26:03.159][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:0; f:37; o:
[02/27/19 21:26:03.160][DEBUG] [Sequence Thread] {"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}
[02/27/19 21:26:03.160][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}

[02/27/19 21:26:03.160][DEBUG] [Sequence Thread] EventMarker 172 - t:m81 (1); e:0; f:37; o:
[02/27/19 21:26:03.160][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:26:03.160][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:26:03.160][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:26:03.221][DEBUG] [PHD2 Listener Thread] Unknown object from PHD2: {"Event":"SettleBegin","Timestamp":1551302763.171,"Host":"JGL2_2","Inst":1}
[02/27/19 21:26:03.260][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:26:03.260][DEBUG] [Sequence Thread] EventMarker 173 - t:m81 (1); e:0; f:37; o:
[02/27/19 21:26:03.261][DEBUG] [Sequence Thread] User has elected to skip guider settling over time...
[02/27/19 21:26:03.261][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Attempting to settle the auto guider...
[02/27/19 21:26:03.261][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Attempting to settle the auto guider...)...
[02/27/19 21:26:03.261][DEBUG] [Sequence Thread] Waiting for Auto Guider distance to fall below 0.5
[02/27/19 21:26:03.261][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:26:03.261][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:26:03.267][DEBUG] [Sequence Thread] Distance is below 0.5, starting timer...
[02/27/19 21:26:03.769][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:26:03.769][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:26:03.774][DEBUG] [Sequence Thread] Distance stayed below 0.5 for 0 seconds, done settling...
[02/27/19 21:26:03.774][DEBUG] [Sequence Thread] Auto guider has settled...
[02/27/19 21:26:03.774][DEBUG] [Sequence Thread] EventMarker 8 - t:m81 (1); e:0; f:37; o:
[02/27/19 21:26:03.774][DEBUG] [Sequence Thread] EventMarker 9 - t:m81 (1); e:0; f:37; o:
[02/27/19 21:26:03.774][DEBUG] [Sequence Thread] EventMarker 10 - t:m81 (1); e:0; f:37; o:
[02/27/19 21:26:03.774][DEBUG] [Sequence Thread] Finished sending frame capture.  Entering wait mode...
[02/27/19 21:26:03.774][DEBUG] [Sequence Thread] EventMarker 11 - t:m81 (1); e:0; f:37; o:
[02/27/19 21:26:03.774][DEBUG] [Sequence Thread] EventMarker 12 - t:m81 (1); e:0; f:37; o:
[02/27/19 21:26:03.779][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Starting integration of m81; Event 1; Frame 38 for 30s...
[02/27/19 21:26:03.779][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Starting integration of m81; Event 1; Frame 38 for 30s...)...
[02/27/19 21:26:03.780][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, TimedError): (2019-02-25) Failure while integrating m81; Event 1; Frame 38 for 30s. Image has not downloaded in alloted time period.
[02/27/19 21:26:03.780][DEBUG] [Sequence Thread] GNS: Sent timed event to GNS...
[02/27/19 21:26:03.781][DEBUG] [Sequence Thread] EventMarker 13 - t:m81 (1); e:0; f:37; o:
[02/27/19 21:26:03.784][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE message received...
[02/27/19 21:26:03.785][DEBUG] [Camera Thread] SetAscomGain to 76
[02/27/19 21:26:03.786][DEBUG] [Camera Thread] Camera gain set to 76
[02/27/19 21:26:03.786][DEBUG] [Camera Thread] SetAscomNormalSpeed... 
[02/27/19 21:26:03.786][DEBUG] [Camera Thread] Cannot set readout speed, not supported by camera...
[02/27/19 21:26:06.151][DEBUG] [PHD2 Listener Thread] PHD2: Settle done received: GOOD
[02/27/19 21:26:23.464][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:26:23.492][DEBUG] [MF Update Thread] Performing serialize...
[02/27/19 21:26:33.881][DEBUG] [Sequence Thread] EventMarker 15 - t:m81 (1); e:0; f:37; o:
[02/27/19 21:26:33.883][DEBUG] [Sequence Thread] Waking from exposure time sleep period...
[02/27/19 21:26:33.884][DEBUG] [Sequence Thread] Checking to see if the CCD has a temp...
[02/27/19 21:26:33.884][DEBUG] [Sequence Thread] Saving the CCD temp...
[02/27/19 21:26:33.887][DEBUG] [Sequence Thread] Entering super dangerous loop to await image completion...
[02/27/19 21:26:33.890][DEBUG] [Sequence Thread] EventMarker 16 - t:m81 (1); e:0; f:37; o:
[02/27/19 21:26:34.950][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE complete...
[02/27/19 21:26:35.451][DEBUG] [Sequence Thread] EventMarker 17 - t:m81 (1); e:0; f:37; o:
[02/27/19 21:26:35.451][DEBUG] [Sequence Thread] Image reported as complete.  Continuing...
[02/27/19 21:26:35.451][DEBUG] [Sequence Thread] Collecting FITs headers...
[02/27/19 21:26:35.452][DEBUG] [Sequence Thread] ASCOM Camera: Could not get last exposure start time.  Reported as (unknown)
[02/27/19 21:26:35.452][DEBUG] [Sequence Thread] DATE-LOC time provided by SGPro (failed to retrieve valid entry from camera)...
[02/27/19 21:26:35.454][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info for last solve...
[02/27/19 21:26:35.454][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info from UI...
[02/27/19 21:26:35.454][DEBUG] [Sequence Thread] Clearing timed monitoring events...
[02/27/19 21:26:35.459][DEBUG] [Sequence Thread] Created full file name (file does not exist): C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_212603_frame38_-15C.fit
[02/27/19 21:26:35.459][DEBUG] [Sequence Thread] SaveFileAscom: Start...
[02/27/19 21:26:35.459][DEBUG] [Sequence Thread] SaveFileAscom: Checking image data...
[02/27/19 21:26:35.459][DEBUG] [Sequence Thread] SaveFileAscom: Create normal preview bitmap...
[02/27/19 21:26:35.464][DEBUG] [Sequence Thread] SaveFileAscom: Locking preview bits...
[02/27/19 21:26:35.464][DEBUG] [Sequence Thread] SaveFileAscom: Validating file name...
[02/27/19 21:26:35.464][DEBUG] [Sequence Thread] SaveFileAscom: Starting byte traversal...
[02/27/19 21:26:35.621][DEBUG] [Sequence Thread] SaveFileAscom: Unlocking preview bits...
[02/27/19 21:26:35.621][DEBUG] [Sequence Thread] SaveFileAscom: Saving preview bitmap to disk...
[02/27/19 21:26:35.621][DEBUG] [Sequence Thread] SaveFileBmp16: Locking bitmap for disk write...
[02/27/19 21:26:35.621][DEBUG] [Sequence Thread] SaveFileBmp16: Opening file stream...
[02/27/19 21:26:35.622][DEBUG] [Sequence Thread] SaveFileBmp16: Writing FITS headers...
[02/27/19 21:26:35.622][DEBUG] [Sequence Thread] SaveFileBmp16: Traversing and persisting bitmap data...
[02/27/19 21:26:35.788][DEBUG] [Sequence Thread] SaveFileBmp16: FITS block fill...
[02/27/19 21:26:35.788][DEBUG] [Sequence Thread] SaveFileBmp16: Unlocking bitmap...
[02/27/19 21:26:35.788][DEBUG] [Sequence Thread] SaveFileBmp16: Closing file stream
[02/27/19 21:26:35.792][DEBUG] [Sequence Thread] SaveFileAscom: Displaying image preview in UI...
[02/27/19 21:26:35.792][DEBUG] [Sequence Thread] Internal Interface: Set Preview...
[02/27/19 21:26:35.792][DEBUG] [Sequence Thread] Display image preview using asynch task...
[02/27/19 21:26:36.953][DEBUG] [Sequence Thread] SaveFileAscom: Done
[02/27/19 21:26:36.953][DEBUG] [Sequence Thread] =========== Save file took 1499 ms
[02/27/19 21:26:36.954][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_212603_frame38_-15C.fit" saved.  HFR = 2.61.
[02/27/19 21:26:36.954][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_212603_frame38_-15C.fit" saved.  HFR = 2.61.)...
[02/27/19 21:26:36.957][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:26:36.957][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:0; f:37; o:
[02/27/19 21:26:36.957][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:26:36.957][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:26:36.957][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:26:37.058][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:26:37.058][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:26:37.058][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:0; f:37; o:
[02/27/19 21:26:37.058][DEBUG] [Sequence Thread] EventMarker 18 - t:m81 (1); e:0; f:37; o:
[02/27/19 21:26:37.073][DEBUG] [Sequence Thread] EventMarker 19 - t:m81 (1); e:0; f:38; o:
[02/27/19 21:26:37.073][DEBUG] [Sequence Thread] EventMarker 20 - t:m81 (1); e:0; f:38; o:
[02/27/19 21:26:37.073][DEBUG] [Sequence Thread] Running post event...
[02/27/19 21:26:37.073][DEBUG] [Sequence Thread] EventMarker 21 - t:m81 (1); e:0; f:38; o:
[02/27/19 21:26:37.077][DEBUG] [Sequence Thread] Incremented numComplete (38) for event[0]...
[02/27/19 21:26:37.079][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:26:37.079][DEBUG] [Sequence Thread] Current event[0] frame count: 38/120...
[02/27/19 21:26:37.079][DEBUG] [Sequence Thread] Current event event[0] has remaining frames.  Returning current event.
[02/27/19 21:26:37.079][DEBUG] [Sequence Thread] Checking for auto manual focus (post)...
[02/27/19 21:26:37.079][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:26:37.091][DEBUG] [Sequence Thread] Attempting to move to next event...
[02/27/19 21:26:37.091][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:26:37.091][DEBUG] [Sequence Thread] Current event[0] frame count: 38/120...
[02/27/19 21:26:37.091][DEBUG] [Sequence Thread] Current event event[0] has remaining frames.  Returning current event.
[02/27/19 21:26:37.091][DEBUG] [Sequence Thread] Running pre event...
[02/27/19 21:26:37.104][DEBUG] [Sequence Thread] Current target has end time at 28/02/2019 06:30:00
[02/27/19 21:26:37.104][DEBUG] [Sequence Thread] End time of next frame is at 27/02/2019 21:27:07
[02/27/19 21:26:37.104][DEBUG] [Sequence Thread] Target is still before end time, continuing...
[02/27/19 21:26:37.104][DEBUG] [Sequence Thread] Running capture event...
[02/27/19 21:26:37.105][DEBUG] [Sequence Thread] ------------- Starting capture frame for event[0] -------------
[02/27/19 21:26:37.134][DEBUG] [Sequence Thread] Sending commands...
[02/27/19 21:26:37.134][DEBUG] [Sequence Thread] SetFlatBox: Frame Type is Light
[02/27/19 21:26:37.134][DEBUG] [Sequence Thread] EventMarker 2 - t:m81 (1); e:0; f:38; o:
[02/27/19 21:26:37.134][DEBUG] [Sequence Thread] Checking if Meridian Flip is needed
[02/27/19 21:26:37.134][DEBUG] [Sequence Thread] Telescope is on the West side of the mount
[02/27/19 21:26:37.134][DEBUG] [Sequence Thread] Meridian Flip not needed, Hour Angle < Degrees Past To Flip: -34.6912120269636 < 0
[02/27/19 21:26:37.134][DEBUG] [Sequence Thread] EventMarker 3 - t:m81 (1); e:0; f:38; o:
[02/27/19 21:26:37.134][DEBUG] [Sequence Thread] EventMarker 4 - t:m81 (1); e:0; f:38; o:
[02/27/19 21:26:37.134][DEBUG] [Sequence Thread] Setting filter position 1...
[02/27/19 21:26:37.135][DEBUG] [Sequence Thread] Filter position 1 is already set.  Skipping...
[02/27/19 21:26:37.135][DEBUG] [Sequence Thread] EventMarker 5 - t:m81 (1); e:0; f:38; o:
[02/27/19 21:26:37.135][DEBUG] [Sequence Thread] Checking for auto manual focus (pre)...
[02/27/19 21:26:37.135][DEBUG] [Sequence Thread] EventMarker 6 - t:m81 (1); e:0; f:38; o:
[02/27/19 21:26:37.143][DEBUG] [Sequence Thread] Autoguider will not dither this frame. Total frames is not a modulus of 5
[02/27/19 21:26:37.143][DEBUG] [Sequence Thread] EventMarker 1 - t:m81 (1); e:0; f:38; o:
[02/27/19 21:26:37.143][DEBUG] [Sequence Thread] Created base name for frame capture: m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_212637_frame39_-15C
[02/27/19 21:26:37.144][DEBUG] [Sequence Thread] Created directory for frame capture: C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\
[02/27/19 21:26:37.144][DEBUG] [Sequence Thread] EventMarker 7 - t:m81 (1); e:0; f:38; o:
[02/27/19 21:26:37.144][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:26:37.144][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:0; f:38; o:
[02/27/19 21:26:37.144][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:26:37.144][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:26:37.144][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:26:37.244][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:26:37.244][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:26:37.244][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:0; f:38; o:
[02/27/19 21:26:37.245][DEBUG] [Sequence Thread] {"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}
[02/27/19 21:26:37.245][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}

[02/27/19 21:26:37.245][DEBUG] [Sequence Thread] EventMarker 172 - t:m81 (1); e:0; f:38; o:
[02/27/19 21:26:37.245][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:26:37.245][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:26:37.245][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:26:37.318][DEBUG] [PHD2 Listener Thread] Unknown object from PHD2: {"Event":"SettleBegin","Timestamp":1551302797.267,"Host":"JGL2_2","Inst":1}
[02/27/19 21:26:37.346][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:26:37.346][DEBUG] [Sequence Thread] EventMarker 173 - t:m81 (1); e:0; f:38; o:
[02/27/19 21:26:37.346][DEBUG] [Sequence Thread] User has elected to skip guider settling over time...
[02/27/19 21:26:37.346][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Attempting to settle the auto guider...
[02/27/19 21:26:37.346][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Attempting to settle the auto guider...)...
[02/27/19 21:26:37.346][DEBUG] [Sequence Thread] Waiting for Auto Guider distance to fall below 0.5
[02/27/19 21:26:37.346][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:26:37.346][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:26:37.352][DEBUG] [Sequence Thread] Distance is below 0.5, starting timer...
[02/27/19 21:26:37.853][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:26:37.853][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:26:37.871][DEBUG] [Sequence Thread] Distance stayed below 0.5 for 0 seconds, done settling...
[02/27/19 21:26:37.871][DEBUG] [Sequence Thread] Auto guider has settled...
[02/27/19 21:26:37.871][DEBUG] [Sequence Thread] EventMarker 8 - t:m81 (1); e:0; f:38; o:
[02/27/19 21:26:37.871][DEBUG] [Sequence Thread] EventMarker 9 - t:m81 (1); e:0; f:38; o:
[02/27/19 21:26:37.871][DEBUG] [Sequence Thread] EventMarker 10 - t:m81 (1); e:0; f:38; o:
[02/27/19 21:26:37.871][DEBUG] [Sequence Thread] Finished sending frame capture.  Entering wait mode...
[02/27/19 21:26:37.871][DEBUG] [Sequence Thread] EventMarker 11 - t:m81 (1); e:0; f:38; o:
[02/27/19 21:26:37.871][DEBUG] [Sequence Thread] EventMarker 12 - t:m81 (1); e:0; f:38; o:
[02/27/19 21:26:37.877][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Starting integration of m81; Event 1; Frame 39 for 30s...
[02/27/19 21:26:37.877][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Starting integration of m81; Event 1; Frame 39 for 30s...)...
[02/27/19 21:26:37.877][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, TimedError): (2019-02-25) Failure while integrating m81; Event 1; Frame 39 for 30s. Image has not downloaded in alloted time period.
[02/27/19 21:26:37.877][DEBUG] [Sequence Thread] GNS: Sent timed event to GNS...
[02/27/19 21:26:37.878][DEBUG] [Sequence Thread] EventMarker 13 - t:m81 (1); e:0; f:38; o:
[02/27/19 21:26:37.879][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE message received...
[02/27/19 21:26:37.880][DEBUG] [Camera Thread] SetAscomGain to 76
[02/27/19 21:26:37.881][DEBUG] [Camera Thread] Camera gain set to 76
[02/27/19 21:26:37.881][DEBUG] [Camera Thread] SetAscomNormalSpeed... 
[02/27/19 21:26:37.881][DEBUG] [Camera Thread] Cannot set readout speed, not supported by camera...
[02/27/19 21:26:38.179][DEBUG] [PHD2 Listener Thread] PHD2: Settle done received: GOOD
[02/27/19 21:27:02.867][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:27:02.882][DEBUG] [Main Thread] Performing serialize...
[02/27/19 21:27:07.914][DEBUG] [Sequence Thread] EventMarker 15 - t:m81 (1); e:0; f:38; o:
[02/27/19 21:27:07.918][DEBUG] [Sequence Thread] Waking from exposure time sleep period...
[02/27/19 21:27:07.918][DEBUG] [Sequence Thread] Checking to see if the CCD has a temp...
[02/27/19 21:27:07.919][DEBUG] [Sequence Thread] Saving the CCD temp...
[02/27/19 21:27:07.928][DEBUG] [Sequence Thread] Entering super dangerous loop to await image completion...
[02/27/19 21:27:07.930][DEBUG] [Sequence Thread] EventMarker 16 - t:m81 (1); e:0; f:38; o:
[02/27/19 21:27:09.002][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE complete...
[02/27/19 21:27:09.434][DEBUG] [Sequence Thread] EventMarker 17 - t:m81 (1); e:0; f:38; o:
[02/27/19 21:27:09.434][DEBUG] [Sequence Thread] Image reported as complete.  Continuing...
[02/27/19 21:27:09.434][DEBUG] [Sequence Thread] Collecting FITs headers...
[02/27/19 21:27:09.435][DEBUG] [Sequence Thread] ASCOM Camera: Could not get last exposure start time.  Reported as (unknown)
[02/27/19 21:27:09.435][DEBUG] [Sequence Thread] DATE-LOC time provided by SGPro (failed to retrieve valid entry from camera)...
[02/27/19 21:27:09.436][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info for last solve...
[02/27/19 21:27:09.436][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info from UI...
[02/27/19 21:27:09.436][DEBUG] [Sequence Thread] Clearing timed monitoring events...
[02/27/19 21:27:09.440][DEBUG] [Sequence Thread] Created full file name (file does not exist): C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_212637_frame39_-15C.fit
[02/27/19 21:27:09.440][DEBUG] [Sequence Thread] SaveFileAscom: Start...
[02/27/19 21:27:09.440][DEBUG] [Sequence Thread] SaveFileAscom: Checking image data...
[02/27/19 21:27:09.440][DEBUG] [Sequence Thread] SaveFileAscom: Create normal preview bitmap...
[02/27/19 21:27:09.447][DEBUG] [Sequence Thread] SaveFileAscom: Locking preview bits...
[02/27/19 21:27:09.447][DEBUG] [Sequence Thread] SaveFileAscom: Validating file name...
[02/27/19 21:27:09.447][DEBUG] [Sequence Thread] SaveFileAscom: Starting byte traversal...
[02/27/19 21:27:09.607][DEBUG] [Sequence Thread] SaveFileAscom: Unlocking preview bits...
[02/27/19 21:27:09.607][DEBUG] [Sequence Thread] SaveFileAscom: Saving preview bitmap to disk...
[02/27/19 21:27:09.607][DEBUG] [Sequence Thread] SaveFileBmp16: Locking bitmap for disk write...
[02/27/19 21:27:09.607][DEBUG] [Sequence Thread] SaveFileBmp16: Opening file stream...
[02/27/19 21:27:09.608][DEBUG] [Sequence Thread] SaveFileBmp16: Writing FITS headers...
[02/27/19 21:27:09.608][DEBUG] [Sequence Thread] SaveFileBmp16: Traversing and persisting bitmap data...
[02/27/19 21:27:09.773][DEBUG] [Sequence Thread] SaveFileBmp16: FITS block fill...
[02/27/19 21:27:09.773][DEBUG] [Sequence Thread] SaveFileBmp16: Unlocking bitmap...
[02/27/19 21:27:09.773][DEBUG] [Sequence Thread] SaveFileBmp16: Closing file stream
[02/27/19 21:27:09.776][DEBUG] [Sequence Thread] SaveFileAscom: Displaying image preview in UI...
[02/27/19 21:27:09.776][DEBUG] [Sequence Thread] Internal Interface: Set Preview...
[02/27/19 21:27:09.776][DEBUG] [Sequence Thread] Display image preview using asynch task...
[02/27/19 21:27:10.714][DEBUG] [Sequence Thread] SaveFileAscom: Done
[02/27/19 21:27:10.714][DEBUG] [Sequence Thread] =========== Save file took 1278 ms
[02/27/19 21:27:10.714][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_212637_frame39_-15C.fit" saved.  HFR = 2.61.
[02/27/19 21:27:10.714][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_212637_frame39_-15C.fit" saved.  HFR = 2.61.)...
[02/27/19 21:27:10.722][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:27:10.722][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:0; f:38; o:
[02/27/19 21:27:10.722][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:27:10.722][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:27:10.722][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:27:10.823][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:27:10.823][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:27:10.823][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:0; f:38; o:
[02/27/19 21:27:10.829][DEBUG] [Sequence Thread] EventMarker 18 - t:m81 (1); e:0; f:38; o:
[02/27/19 21:27:10.851][DEBUG] [Sequence Thread] EventMarker 19 - t:m81 (1); e:0; f:39; o:
[02/27/19 21:27:10.851][DEBUG] [Sequence Thread] EventMarker 20 - t:m81 (1); e:0; f:39; o:
[02/27/19 21:27:10.851][DEBUG] [Sequence Thread] Running post event...
[02/27/19 21:27:10.851][DEBUG] [Sequence Thread] EventMarker 21 - t:m81 (1); e:0; f:39; o:
[02/27/19 21:27:10.866][DEBUG] [Sequence Thread] Incremented numComplete (39) for event[0]...
[02/27/19 21:27:10.867][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:27:10.867][DEBUG] [Sequence Thread] Current event[0] frame count: 39/120...
[02/27/19 21:27:10.867][DEBUG] [Sequence Thread] Looking at event[1]...
[02/27/19 21:27:10.867][DEBUG] [Sequence Thread] Found event event[1] with remaining frames.
[02/27/19 21:27:10.867][DEBUG] [Sequence Thread] Event[1] frame count: 7/120...
[02/27/19 21:27:10.867][DEBUG] [Sequence Thread] Getting next event (1)...
[02/27/19 21:27:10.867][DEBUG] [Sequence Thread] Checking for auto manual focus (post)...
[02/27/19 21:27:10.867][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:27:10.881][DEBUG] [Sequence Thread] Attempting to move to next event...
[02/27/19 21:27:10.881][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:27:10.881][DEBUG] [Sequence Thread] Current event[0] frame count: 39/120...
[02/27/19 21:27:10.881][DEBUG] [Sequence Thread] Looking at event[1]...
[02/27/19 21:27:10.881][DEBUG] [Sequence Thread] Found event event[1] with remaining frames.
[02/27/19 21:27:10.881][DEBUG] [Sequence Thread] Event[1] frame count: 7/120...
[02/27/19 21:27:10.881][DEBUG] [Sequence Thread] Getting next event (1)...
[02/27/19 21:27:10.881][DEBUG] [Sequence Thread] Running pre event...
[02/27/19 21:27:10.907][DEBUG] [Sequence Thread] Current target has end time at 28/02/2019 06:30:00
[02/27/19 21:27:10.907][DEBUG] [Sequence Thread] End time of next frame is at 27/02/2019 21:27:40
[02/27/19 21:27:10.907][DEBUG] [Sequence Thread] Target is still before end time, continuing...
[02/27/19 21:27:10.907][DEBUG] [Sequence Thread] Running capture event...
[02/27/19 21:27:10.909][DEBUG] [Sequence Thread] ------------- Starting capture frame for event[1] -------------
[02/27/19 21:27:10.914][DEBUG] [Sequence Thread] Sending commands...
[02/27/19 21:27:10.914][DEBUG] [Sequence Thread] SetFlatBox: Frame Type is Light
[02/27/19 21:27:10.914][DEBUG] [Sequence Thread] EventMarker 2 - t:m81 (1); e:1; f:7; o:
[02/27/19 21:27:10.914][DEBUG] [Sequence Thread] Checking if Meridian Flip is needed
[02/27/19 21:27:10.914][DEBUG] [Sequence Thread] Telescope is on the West side of the mount
[02/27/19 21:27:10.914][DEBUG] [Sequence Thread] Meridian Flip not needed, Hour Angle < Degrees Past To Flip: -34.5498657489456 < 0
[02/27/19 21:27:10.914][DEBUG] [Sequence Thread] EventMarker 3 - t:m81 (1); e:1; f:7; o:
[02/27/19 21:27:10.914][DEBUG] [Sequence Thread] EventMarker 4 - t:m81 (1); e:1; f:7; o:
[02/27/19 21:27:10.914][DEBUG] [Sequence Thread] Setting filter position 1...
[02/27/19 21:27:10.914][DEBUG] [Sequence Thread] Filter position 1 is already set.  Skipping...
[02/27/19 21:27:10.914][DEBUG] [Sequence Thread] EventMarker 5 - t:m81 (1); e:1; f:7; o:
[02/27/19 21:27:10.914][DEBUG] [Sequence Thread] Checking for auto manual focus (pre)...
[02/27/19 21:27:10.914][DEBUG] [Sequence Thread] EventMarker 6 - t:m81 (1); e:1; f:7; o:
[02/27/19 21:27:10.923][DEBUG] [Sequence Thread] Running dither...
[02/27/19 21:27:10.934][DEBUG] [Sequence Thread] PHD2 dither request: 1...
[02/27/19 21:27:10.934][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:27:10.934][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:27:10.934][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:27:11.034][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:27:12.035][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:27:12.035][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:27:12.035][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:27:12.136][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:27:13.137][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:27:13.137][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:27:13.137][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:27:13.237][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:27:14.237][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:27:14.237][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:27:14.237][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:27:14.338][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:27:15.339][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:27:15.339][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:27:15.339][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:27:15.439][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:27:15.439][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:27:15.439][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:27:15.439][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:27:15.539][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:27:15.539][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "dither", "params": [1, false, {"pixels": 0.5, "time": 0, "timeout": 600}], "id": 1002}

[02/27/19 21:27:15.788][DEBUG] [Sequence Thread] EventMarker 1 - t:m81 (1); e:1; f:7; o:
[02/27/19 21:27:15.789][DEBUG] [Sequence Thread] Created base name for frame capture: m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_212715_frame8_-15C
[02/27/19 21:27:15.789][DEBUG] [Sequence Thread] Created directory for frame capture: C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\
[02/27/19 21:27:15.789][DEBUG] [Sequence Thread] EventMarker 7 - t:m81 (1); e:1; f:7; o:
[02/27/19 21:27:15.789][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:27:15.789][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:1; f:7; o:
[02/27/19 21:27:15.790][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:27:15.790][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:27:15.790][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:27:15.796][DEBUG] [PHD2 Listener Thread] Unknown object from PHD2: {"Event":"SettleBegin","Timestamp":1551302835.796,"Host":"JGL2_2","Inst":1}
[02/27/19 21:27:15.891][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:27:15.891][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:27:15.891][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:1; f:7; o:
[02/27/19 21:27:15.891][DEBUG] [Sequence Thread] {"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}
[02/27/19 21:27:15.891][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}

[02/27/19 21:27:15.891][DEBUG] [Sequence Thread] EventMarker 172 - t:m81 (1); e:1; f:7; o:
[02/27/19 21:27:15.891][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:27:15.891][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:27:15.891][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:27:15.949][DEBUG] [PHD2 Listener Thread] Error received from RPC: Cannot initiate guide while dither is in progress
[02/27/19 21:27:15.991][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:27:15.991][DEBUG] [Sequence Thread] EventMarker 173 - t:m81 (1); e:1; f:7; o:
[02/27/19 21:27:15.992][DEBUG] [Sequence Thread] User has elected to skip guider settling over time...
[02/27/19 21:27:15.992][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Attempting to settle the auto guider...
[02/27/19 21:27:15.992][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Attempting to settle the auto guider...)...
[02/27/19 21:27:15.992][DEBUG] [Sequence Thread] Waiting for Auto Guider distance to fall below 0.5
[02/27/19 21:27:15.992][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:27:15.992][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:27:16.000][DEBUG] [Sequence Thread] Distance is below 0.5, starting timer...
[02/27/19 21:27:16.501][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:27:16.501][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:27:16.512][DEBUG] [Sequence Thread] Distance stayed below 0.5 for 0 seconds, done settling...
[02/27/19 21:27:16.513][DEBUG] [Sequence Thread] Auto guider has settled...
[02/27/19 21:27:16.513][DEBUG] [Sequence Thread] EventMarker 8 - t:m81 (1); e:1; f:7; o:
[02/27/19 21:27:16.513][DEBUG] [Sequence Thread] EventMarker 9 - t:m81 (1); e:1; f:7; o:
[02/27/19 21:27:16.513][DEBUG] [Sequence Thread] EventMarker 10 - t:m81 (1); e:1; f:7; o:
[02/27/19 21:27:16.513][DEBUG] [Sequence Thread] Finished sending frame capture.  Entering wait mode...
[02/27/19 21:27:16.513][DEBUG] [Sequence Thread] EventMarker 11 - t:m81 (1); e:1; f:7; o:
[02/27/19 21:27:16.514][DEBUG] [Sequence Thread] EventMarker 12 - t:m81 (1); e:1; f:7; o:
[02/27/19 21:27:16.517][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE message received...
[02/27/19 21:27:16.519][DEBUG] [Camera Thread] SetAscomGain to 76
[02/27/19 21:27:16.520][DEBUG] [Camera Thread] Camera gain set to 76
[02/27/19 21:27:16.520][DEBUG] [Camera Thread] SetAscomNormalSpeed... 
[02/27/19 21:27:16.520][DEBUG] [Camera Thread] Cannot set readout speed, not supported by camera...
[02/27/19 21:27:16.522][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Starting integration of m81; Event 2; Frame 8 for 30s...
[02/27/19 21:27:16.522][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Starting integration of m81; Event 2; Frame 8 for 30s...)...
[02/27/19 21:27:16.523][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, TimedError): (2019-02-25) Failure while integrating m81; Event 2; Frame 8 for 30s. Image has not downloaded in alloted time period.
[02/27/19 21:27:16.523][DEBUG] [Sequence Thread] GNS: Sent timed event to GNS...
[02/27/19 21:27:16.525][DEBUG] [Sequence Thread] EventMarker 13 - t:m81 (1); e:1; f:7; o:
[02/27/19 21:27:18.120][DEBUG] [PHD2 Listener Thread] PHD2: Settle done received: GOOD
[02/27/19 21:27:46.610][DEBUG] [Sequence Thread] EventMarker 15 - t:m81 (1); e:1; f:7; o:
[02/27/19 21:27:46.613][DEBUG] [Sequence Thread] Waking from exposure time sleep period...
[02/27/19 21:27:46.613][DEBUG] [Sequence Thread] Checking to see if the CCD has a temp...
[02/27/19 21:27:46.613][DEBUG] [Sequence Thread] Saving the CCD temp...
[02/27/19 21:27:46.620][DEBUG] [Sequence Thread] Entering super dangerous loop to await image completion...
[02/27/19 21:27:46.621][DEBUG] [Sequence Thread] EventMarker 16 - t:m81 (1); e:1; f:7; o:
[02/27/19 21:27:47.435][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:27:47.447][DEBUG] [MF Update Thread] Performing serialize...
[02/27/19 21:27:47.729][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE complete...
[02/27/19 21:27:48.228][DEBUG] [Sequence Thread] EventMarker 17 - t:m81 (1); e:1; f:7; o:
[02/27/19 21:27:48.229][DEBUG] [Sequence Thread] Image reported as complete.  Continuing...
[02/27/19 21:27:48.229][DEBUG] [Sequence Thread] Collecting FITs headers...
[02/27/19 21:27:48.230][DEBUG] [Sequence Thread] ASCOM Camera: Could not get last exposure start time.  Reported as (unknown)
[02/27/19 21:27:48.230][DEBUG] [Sequence Thread] DATE-LOC time provided by SGPro (failed to retrieve valid entry from camera)...
[02/27/19 21:27:48.231][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info for last solve...
[02/27/19 21:27:48.231][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info from UI...
[02/27/19 21:27:48.231][DEBUG] [Sequence Thread] Clearing timed monitoring events...
[02/27/19 21:27:48.237][DEBUG] [Sequence Thread] Created full file name (file does not exist): C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_212715_frame8_-15C.fit
[02/27/19 21:27:48.237][DEBUG] [Sequence Thread] SaveFileAscom: Start...
[02/27/19 21:27:48.237][DEBUG] [Sequence Thread] SaveFileAscom: Checking image data...
[02/27/19 21:27:48.237][DEBUG] [Sequence Thread] SaveFileAscom: Create normal preview bitmap...
[02/27/19 21:27:48.245][DEBUG] [Sequence Thread] SaveFileAscom: Locking preview bits...
[02/27/19 21:27:48.245][DEBUG] [Sequence Thread] SaveFileAscom: Validating file name...
[02/27/19 21:27:48.245][DEBUG] [Sequence Thread] SaveFileAscom: Starting byte traversal...
[02/27/19 21:27:48.387][DEBUG] [Sequence Thread] SaveFileAscom: Unlocking preview bits...
[02/27/19 21:27:48.387][DEBUG] [Sequence Thread] SaveFileAscom: Saving preview bitmap to disk...
[02/27/19 21:27:48.387][DEBUG] [Sequence Thread] SaveFileBmp16: Locking bitmap for disk write...
[02/27/19 21:27:48.387][DEBUG] [Sequence Thread] SaveFileBmp16: Opening file stream...
[02/27/19 21:27:48.395][DEBUG] [Sequence Thread] SaveFileBmp16: Writing FITS headers...
[02/27/19 21:27:48.398][DEBUG] [Sequence Thread] SaveFileBmp16: Traversing and persisting bitmap data...
[02/27/19 21:27:48.551][DEBUG] [Sequence Thread] SaveFileBmp16: FITS block fill...
[02/27/19 21:27:48.551][DEBUG] [Sequence Thread] SaveFileBmp16: Unlocking bitmap...
[02/27/19 21:27:48.551][DEBUG] [Sequence Thread] SaveFileBmp16: Closing file stream
[02/27/19 21:27:48.555][DEBUG] [Sequence Thread] SaveFileAscom: Displaying image preview in UI...
[02/27/19 21:27:48.555][DEBUG] [Sequence Thread] Internal Interface: Set Preview...
[02/27/19 21:27:48.555][DEBUG] [Sequence Thread] Display image preview using asynch task...
[02/27/19 21:27:49.534][DEBUG] [Sequence Thread] SaveFileAscom: Done
[02/27/19 21:27:49.534][DEBUG] [Sequence Thread] =========== Save file took 1302 ms
[02/27/19 21:27:49.534][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_212715_frame8_-15C.fit" saved.  HFR = 2.61.
[02/27/19 21:27:49.534][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_212715_frame8_-15C.fit" saved.  HFR = 2.61.)...
[02/27/19 21:27:49.539][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:27:49.539][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:1; f:7; o:
[02/27/19 21:27:49.539][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:27:49.539][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:27:49.539][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:27:49.640][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:27:49.640][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:27:49.640][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:1; f:7; o:
[02/27/19 21:27:49.640][DEBUG] [Sequence Thread] EventMarker 18 - t:m81 (1); e:1; f:7; o:
[02/27/19 21:27:49.645][DEBUG] [Sequence Thread] EventMarker 19 - t:m81 (1); e:1; f:8; o:
[02/27/19 21:27:49.645][DEBUG] [Sequence Thread] EventMarker 20 - t:m81 (1); e:1; f:8; o:
[02/27/19 21:27:49.645][DEBUG] [Sequence Thread] Running post event...
[02/27/19 21:27:49.645][DEBUG] [Sequence Thread] EventMarker 21 - t:m81 (1); e:1; f:8; o:
[02/27/19 21:27:49.656][DEBUG] [Sequence Thread] Incremented numComplete (8) for event[1]...
[02/27/19 21:27:49.658][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:27:49.658][DEBUG] [Sequence Thread] Current event[1] frame count: 8/120...
[02/27/19 21:27:49.658][DEBUG] [Sequence Thread] Looking at event[2]...
[02/27/19 21:27:49.658][DEBUG] [Sequence Thread] Found event event[2] with remaining frames.
[02/27/19 21:27:49.658][DEBUG] [Sequence Thread] Event[2] frame count: 8/60...
[02/27/19 21:27:49.658][DEBUG] [Sequence Thread] Getting next event (2)...
[02/27/19 21:27:49.658][DEBUG] [Sequence Thread] Checking for auto manual focus (post)...
[02/27/19 21:27:49.658][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:27:49.670][DEBUG] [Sequence Thread] Attempting to move to next event...
[02/27/19 21:27:49.671][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:27:49.671][DEBUG] [Sequence Thread] Current event[1] frame count: 8/120...
[02/27/19 21:27:49.671][DEBUG] [Sequence Thread] Looking at event[2]...
[02/27/19 21:27:49.671][DEBUG] [Sequence Thread] Found event event[2] with remaining frames.
[02/27/19 21:27:49.671][DEBUG] [Sequence Thread] Event[2] frame count: 8/60...
[02/27/19 21:27:49.671][DEBUG] [Sequence Thread] Getting next event (2)...
[02/27/19 21:27:49.671][DEBUG] [Sequence Thread] Running pre event...
[02/27/19 21:27:49.686][DEBUG] [Sequence Thread] Current target has end time at 28/02/2019 06:30:00
[02/27/19 21:27:49.686][DEBUG] [Sequence Thread] End time of next frame is at 27/02/2019 21:29:19
[02/27/19 21:27:49.686][DEBUG] [Sequence Thread] Target is still before end time, continuing...
[02/27/19 21:27:49.686][DEBUG] [Sequence Thread] Running capture event...
[02/27/19 21:27:49.687][DEBUG] [Sequence Thread] ------------- Starting capture frame for event[2] -------------
[02/27/19 21:27:49.693][DEBUG] [Sequence Thread] Sending commands...
[02/27/19 21:27:49.693][DEBUG] [Sequence Thread] SetFlatBox: Frame Type is Light
[02/27/19 21:27:49.693][DEBUG] [Sequence Thread] EventMarker 2 - t:m81 (1); e:2; f:8; o:
[02/27/19 21:27:49.693][DEBUG] [Sequence Thread] Checking if Meridian Flip is needed
[02/27/19 21:27:49.693][DEBUG] [Sequence Thread] Telescope is on the West side of the mount
[02/27/19 21:27:49.693][DEBUG] [Sequence Thread] Meridian Flip not needed, Hour Angle < Degrees Past To Flip: -34.3845458784104 < 0
[02/27/19 21:27:49.693][DEBUG] [Sequence Thread] EventMarker 3 - t:m81 (1); e:2; f:8; o:
[02/27/19 21:27:49.693][DEBUG] [Sequence Thread] EventMarker 4 - t:m81 (1); e:2; f:8; o:
[02/27/19 21:27:49.693][DEBUG] [Sequence Thread] Setting filter position 4...
[02/27/19 21:27:49.699][DEBUG] [Sequence Thread] Setting filter: Blue...
[02/27/19 21:27:49.699][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 1...
[02/27/19 21:27:49.699][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 1 is complete...
[02/27/19 21:27:49.901][DEBUG] [Sequence Thread] Adjust focuser pos per filter: Moving focsuer to focus position (64704)...
[02/27/19 21:27:49.902][DEBUG] [Sequence Thread] Adjust focuser pos per filter
[02/27/19 21:27:49.902][DEBUG] [Sequence Thread] Old filter: Lum; Focus pos: 64700
[02/27/19 21:27:49.902][DEBUG] [Sequence Thread] New filter: Blue; Focus pos: 64704
[02/27/19 21:27:49.902][DEBUG] [Sequence Thread] Pos delta: 4 steps
[02/27/19 21:27:49.902][DEBUG] [Sequence Thread] New position-> (current: 4848) + (delta: 4) = 4852
[02/27/19 21:27:49.902][DEBUG] [Sequence Thread] Focuser moving to 4852
[02/27/19 21:27:50.551][DEBUG] [Sequence Thread] Focuser move call complete
[02/27/19 21:27:50.558][DEBUG] [Sequence Thread] Focuser position matches requested position (4852), continuing...
[02/27/19 21:27:50.558][DEBUG] [Sequence Thread] focuser move is complete...
[02/27/19 21:27:50.560][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 2...
[02/27/19 21:27:53.562][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 2 complete...
[02/27/19 21:27:53.570][DEBUG] [Sequence Thread] EventMarker 5 - t:m81 (1); e:2; f:8; o:
[02/27/19 21:27:53.570][DEBUG] [Sequence Thread] Checking for auto manual focus (pre)...
[02/27/19 21:27:53.570][DEBUG] [Sequence Thread] EventMarker 6 - t:m81 (1); e:2; f:8; o:
[02/27/19 21:27:53.578][DEBUG] [Sequence Thread] Autoguider will not dither this frame. Total frames is not a modulus of 5
[02/27/19 21:27:53.578][DEBUG] [Sequence Thread] EventMarker 1 - t:m81 (1); e:2; f:8; o:
[02/27/19 21:27:53.579][DEBUG] [Sequence Thread] Created base name for frame capture: m81_Light_90sec_1x1__Blue_gain_76_2019-02-27_212753_frame9_-15C
[02/27/19 21:27:53.579][DEBUG] [Sequence Thread] Created directory for frame capture: C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\
[02/27/19 21:27:53.579][DEBUG] [Sequence Thread] EventMarker 7 - t:m81 (1); e:2; f:8; o:
[02/27/19 21:27:53.579][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:27:53.579][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:2; f:8; o:
[02/27/19 21:27:53.579][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:27:53.579][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:27:53.579][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:27:53.680][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:27:53.680][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:27:53.680][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:2; f:8; o:
[02/27/19 21:27:53.681][DEBUG] [Sequence Thread] {"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}
[02/27/19 21:27:53.681][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}

[02/27/19 21:27:53.681][DEBUG] [Sequence Thread] EventMarker 172 - t:m81 (1); e:2; f:8; o:
[02/27/19 21:27:53.681][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:27:53.681][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:27:53.681][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:27:53.743][DEBUG] [PHD2 Listener Thread] Unknown object from PHD2: {"Event":"SettleBegin","Timestamp":1551302873.692,"Host":"JGL2_2","Inst":1}
[02/27/19 21:27:53.782][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:27:53.782][DEBUG] [Sequence Thread] EventMarker 173 - t:m81 (1); e:2; f:8; o:
[02/27/19 21:27:53.782][DEBUG] [Sequence Thread] User has elected to skip guider settling over time...
[02/27/19 21:27:53.782][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Attempting to settle the auto guider...
[02/27/19 21:27:53.782][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Attempting to settle the auto guider...)...
[02/27/19 21:27:53.782][DEBUG] [Sequence Thread] Waiting for Auto Guider distance to fall below 0.5
[02/27/19 21:27:53.782][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:27:53.782][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:27:53.789][DEBUG] [Sequence Thread] Distance is below 0.5, starting timer...
[02/27/19 21:27:54.147][DEBUG] [PHD2 Listener Thread] PHD2: Settle done received: GOOD
[02/27/19 21:27:54.290][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:27:54.290][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:27:54.294][DEBUG] [Sequence Thread] Distance stayed below 0.5 for 0 seconds, done settling...
[02/27/19 21:27:54.295][DEBUG] [Sequence Thread] Auto guider has settled...
[02/27/19 21:27:54.295][DEBUG] [Sequence Thread] EventMarker 8 - t:m81 (1); e:2; f:8; o:
[02/27/19 21:27:54.295][DEBUG] [Sequence Thread] EventMarker 9 - t:m81 (1); e:2; f:8; o:
[02/27/19 21:27:54.295][DEBUG] [Sequence Thread] EventMarker 10 - t:m81 (1); e:2; f:8; o:
[02/27/19 21:27:54.295][DEBUG] [Sequence Thread] Finished sending frame capture.  Entering wait mode...
[02/27/19 21:27:54.295][DEBUG] [Sequence Thread] EventMarker 11 - t:m81 (1); e:2; f:8; o:
[02/27/19 21:27:54.295][DEBUG] [Sequence Thread] EventMarker 12 - t:m81 (1); e:2; f:8; o:
[02/27/19 21:27:54.301][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Starting integration of m81; Event 3; Frame 9 for 90s...
[02/27/19 21:27:54.301][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Starting integration of m81; Event 3; Frame 9 for 90s...)...
[02/27/19 21:27:54.301][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, TimedError): (2019-02-25) Failure while integrating m81; Event 3; Frame 9 for 90s. Image has not downloaded in alloted time period.
[02/27/19 21:27:54.301][DEBUG] [Sequence Thread] GNS: Sent timed event to GNS...
[02/27/19 21:27:54.302][DEBUG] [Sequence Thread] EventMarker 13 - t:m81 (1); e:2; f:8; o:
[02/27/19 21:27:54.302][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE message received...
[02/27/19 21:27:54.303][DEBUG] [Camera Thread] SetAscomGain to 76
[02/27/19 21:27:54.304][DEBUG] [Camera Thread] Camera gain set to 76
[02/27/19 21:27:54.304][DEBUG] [Camera Thread] SetAscomNormalSpeed... 
[02/27/19 21:27:54.304][DEBUG] [Camera Thread] Cannot set readout speed, not supported by camera...
[02/27/19 21:29:10.868][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:29:10.883][DEBUG] [MF Update Thread] Performing serialize...
[02/27/19 21:29:24.436][DEBUG] [Sequence Thread] EventMarker 15 - t:m81 (1); e:2; f:8; o:
[02/27/19 21:29:24.440][DEBUG] [Sequence Thread] Waking from exposure time sleep period...
[02/27/19 21:29:24.440][DEBUG] [Sequence Thread] Checking to see if the CCD has a temp...
[02/27/19 21:29:24.440][DEBUG] [Sequence Thread] Saving the CCD temp...
[02/27/19 21:29:24.448][DEBUG] [Sequence Thread] Entering super dangerous loop to await image completion...
[02/27/19 21:29:24.450][DEBUG] [Sequence Thread] EventMarker 16 - t:m81 (1); e:2; f:8; o:
[02/27/19 21:29:25.548][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE complete...
[02/27/19 21:29:25.955][DEBUG] [Sequence Thread] EventMarker 17 - t:m81 (1); e:2; f:8; o:
[02/27/19 21:29:25.956][DEBUG] [Sequence Thread] Image reported as complete.  Continuing...
[02/27/19 21:29:25.956][DEBUG] [Sequence Thread] Collecting FITs headers...
[02/27/19 21:29:25.956][DEBUG] [Sequence Thread] ASCOM Camera: Could not get last exposure start time.  Reported as (unknown)
[02/27/19 21:29:25.957][DEBUG] [Sequence Thread] DATE-LOC time provided by SGPro (failed to retrieve valid entry from camera)...
[02/27/19 21:29:25.958][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info for last solve...
[02/27/19 21:29:25.958][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info from UI...
[02/27/19 21:29:25.958][DEBUG] [Sequence Thread] Clearing timed monitoring events...
[02/27/19 21:29:25.962][DEBUG] [Sequence Thread] Created full file name (file does not exist): C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\m81_Light_90sec_1x1__Blue_gain_76_2019-02-27_212753_frame9_-15C.fit
[02/27/19 21:29:25.962][DEBUG] [Sequence Thread] SaveFileAscom: Start...
[02/27/19 21:29:25.962][DEBUG] [Sequence Thread] SaveFileAscom: Checking image data...
[02/27/19 21:29:25.962][DEBUG] [Sequence Thread] SaveFileAscom: Create normal preview bitmap...
[02/27/19 21:29:25.967][DEBUG] [Sequence Thread] SaveFileAscom: Locking preview bits...
[02/27/19 21:29:25.967][DEBUG] [Sequence Thread] SaveFileAscom: Validating file name...
[02/27/19 21:29:25.967][DEBUG] [Sequence Thread] SaveFileAscom: Starting byte traversal...
[02/27/19 21:29:26.112][DEBUG] [Sequence Thread] SaveFileAscom: Unlocking preview bits...
[02/27/19 21:29:26.112][DEBUG] [Sequence Thread] SaveFileAscom: Saving preview bitmap to disk...
[02/27/19 21:29:26.112][DEBUG] [Sequence Thread] SaveFileBmp16: Locking bitmap for disk write...
[02/27/19 21:29:26.112][DEBUG] [Sequence Thread] SaveFileBmp16: Opening file stream...
[02/27/19 21:29:26.112][DEBUG] [Sequence Thread] SaveFileBmp16: Writing FITS headers...
[02/27/19 21:29:26.112][DEBUG] [Sequence Thread] SaveFileBmp16: Traversing and persisting bitmap data...
[02/27/19 21:29:26.285][DEBUG] [Sequence Thread] SaveFileBmp16: FITS block fill...
[02/27/19 21:29:26.285][DEBUG] [Sequence Thread] SaveFileBmp16: Unlocking bitmap...
[02/27/19 21:29:26.285][DEBUG] [Sequence Thread] SaveFileBmp16: Closing file stream
[02/27/19 21:29:26.286][DEBUG] [Sequence Thread] SaveFileAscom: Displaying image preview in UI...
[02/27/19 21:29:26.286][DEBUG] [Sequence Thread] Internal Interface: Set Preview...
[02/27/19 21:29:26.286][DEBUG] [Sequence Thread] Display image preview using asynch task...
[02/27/19 21:29:27.112][DEBUG] [Sequence Thread] SaveFileAscom: Done
[02/27/19 21:29:27.112][DEBUG] [Sequence Thread] =========== Save file took 1153 ms
[02/27/19 21:29:27.112][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Image "m81_Light_90sec_1x1__Blue_gain_76_2019-02-27_212753_frame9_-15C.fit" saved.  HFR = 2.61.
[02/27/19 21:29:27.112][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Image "m81_Light_90sec_1x1__Blue_gain_76_2019-02-27_212753_frame9_-15C.fit" saved.  HFR = 2.61.)...
[02/27/19 21:29:27.116][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:29:27.116][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:2; f:8; o:
[02/27/19 21:29:27.116][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:29:27.116][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:29:27.116][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:29:27.217][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:29:27.217][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:29:27.217][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:2; f:8; o:
[02/27/19 21:29:27.217][DEBUG] [Sequence Thread] EventMarker 18 - t:m81 (1); e:2; f:8; o:
[02/27/19 21:29:27.231][DEBUG] [Sequence Thread] EventMarker 19 - t:m81 (1); e:2; f:9; o:
[02/27/19 21:29:27.231][DEBUG] [Sequence Thread] EventMarker 20 - t:m81 (1); e:2; f:9; o:
[02/27/19 21:29:27.231][DEBUG] [Sequence Thread] Running post event...
[02/27/19 21:29:27.231][DEBUG] [Sequence Thread] EventMarker 21 - t:m81 (1); e:2; f:9; o:
[02/27/19 21:29:27.236][DEBUG] [Sequence Thread] Incremented numComplete (9) for event[2]...
[02/27/19 21:29:27.240][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:29:27.240][DEBUG] [Sequence Thread] Current event[2] frame count: 9/60...
[02/27/19 21:29:27.240][DEBUG] [Sequence Thread] Looking at event[3]...
[02/27/19 21:29:27.240][DEBUG] [Sequence Thread] Found event event[3] with remaining frames.
[02/27/19 21:29:27.240][DEBUG] [Sequence Thread] Event[3] frame count: 8/60...
[02/27/19 21:29:27.240][DEBUG] [Sequence Thread] Getting next event (3)...
[02/27/19 21:29:27.240][DEBUG] [Sequence Thread] Checking for auto manual focus (post)...
[02/27/19 21:29:27.240][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:29:27.253][DEBUG] [Sequence Thread] Attempting to move to next event...
[02/27/19 21:29:27.253][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:29:27.253][DEBUG] [Sequence Thread] Current event[2] frame count: 9/60...
[02/27/19 21:29:27.253][DEBUG] [Sequence Thread] Looking at event[3]...
[02/27/19 21:29:27.253][DEBUG] [Sequence Thread] Found event event[3] with remaining frames.
[02/27/19 21:29:27.253][DEBUG] [Sequence Thread] Event[3] frame count: 8/60...
[02/27/19 21:29:27.253][DEBUG] [Sequence Thread] Getting next event (3)...
[02/27/19 21:29:27.253][DEBUG] [Sequence Thread] Running pre event...
[02/27/19 21:29:27.272][DEBUG] [Sequence Thread] Current target has end time at 28/02/2019 06:30:00
[02/27/19 21:29:27.272][DEBUG] [Sequence Thread] End time of next frame is at 27/02/2019 21:30:57
[02/27/19 21:29:27.272][DEBUG] [Sequence Thread] Target is still before end time, continuing...
[02/27/19 21:29:27.272][DEBUG] [Sequence Thread] Running capture event...
[02/27/19 21:29:27.274][DEBUG] [Sequence Thread] ------------- Starting capture frame for event[3] -------------
[02/27/19 21:29:27.280][DEBUG] [Sequence Thread] Sending commands...
[02/27/19 21:29:27.280][DEBUG] [Sequence Thread] SetFlatBox: Frame Type is Light
[02/27/19 21:29:27.280][DEBUG] [Sequence Thread] EventMarker 2 - t:m81 (1); e:3; f:8; o:
[02/27/19 21:29:27.280][DEBUG] [Sequence Thread] Checking if Meridian Flip is needed
[02/27/19 21:29:27.280][DEBUG] [Sequence Thread] Telescope is on the West side of the mount
[02/27/19 21:29:27.280][DEBUG] [Sequence Thread] Meridian Flip not needed, Hour Angle < Degrees Past To Flip: -33.9782726416104 < 0
[02/27/19 21:29:27.280][DEBUG] [Sequence Thread] EventMarker 3 - t:m81 (1); e:3; f:8; o:
[02/27/19 21:29:27.280][DEBUG] [Sequence Thread] EventMarker 4 - t:m81 (1); e:3; f:8; o:
[02/27/19 21:29:27.280][DEBUG] [Sequence Thread] Setting filter position 2...
[02/27/19 21:29:27.287][DEBUG] [Sequence Thread] Setting filter: Red...
[02/27/19 21:29:27.287][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 1...
[02/27/19 21:29:27.287][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 1 is complete...
[02/27/19 21:29:27.490][DEBUG] [Sequence Thread] Adjust focuser pos per filter: Moving focsuer to focus position (64697)...
[02/27/19 21:29:27.490][DEBUG] [Sequence Thread] Adjust focuser pos per filter
[02/27/19 21:29:27.490][DEBUG] [Sequence Thread] Old filter: Blue; Focus pos: 64704
[02/27/19 21:29:27.490][DEBUG] [Sequence Thread] New filter: Red; Focus pos: 64697
[02/27/19 21:29:27.490][DEBUG] [Sequence Thread] Pos delta: -7 steps
[02/27/19 21:29:27.490][DEBUG] [Sequence Thread] New position-> (current: 4852) + (delta: -7) = 4845
[02/27/19 21:29:27.490][DEBUG] [Sequence Thread] Focuser moving to 4845
[02/27/19 21:29:28.134][DEBUG] [Sequence Thread] Focuser move call complete
[02/27/19 21:29:28.373][DEBUG] [Sequence Thread] Focuser position matches requested position (4845), continuing...
[02/27/19 21:29:28.373][DEBUG] [Sequence Thread] focuser move is complete...
[02/27/19 21:29:28.375][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 2...
[02/27/19 21:29:31.377][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 2 complete...
[02/27/19 21:29:31.386][DEBUG] [Sequence Thread] EventMarker 5 - t:m81 (1); e:3; f:8; o:
[02/27/19 21:29:31.386][DEBUG] [Sequence Thread] Checking for auto manual focus (pre)...
[02/27/19 21:29:31.386][DEBUG] [Sequence Thread] EventMarker 6 - t:m81 (1); e:3; f:8; o:
[02/27/19 21:29:31.395][DEBUG] [Sequence Thread] Autoguider will not dither this frame. Total frames is not a modulus of 5
[02/27/19 21:29:31.395][DEBUG] [Sequence Thread] EventMarker 1 - t:m81 (1); e:3; f:8; o:
[02/27/19 21:29:31.395][DEBUG] [Sequence Thread] Created base name for frame capture: m81_Light_90sec_1x1__Red_gain_76_2019-02-27_212931_frame9_-15C
[02/27/19 21:29:31.395][DEBUG] [Sequence Thread] Created directory for frame capture: C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\
[02/27/19 21:29:31.395][DEBUG] [Sequence Thread] EventMarker 7 - t:m81 (1); e:3; f:8; o:
[02/27/19 21:29:31.395][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:29:31.395][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:3; f:8; o:
[02/27/19 21:29:31.395][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:29:31.395][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:29:31.395][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:29:31.496][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:29:31.496][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:29:31.496][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:3; f:8; o:
[02/27/19 21:29:31.496][DEBUG] [Sequence Thread] {"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}
[02/27/19 21:29:31.496][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}

[02/27/19 21:29:31.496][DEBUG] [Sequence Thread] EventMarker 172 - t:m81 (1); e:3; f:8; o:
[02/27/19 21:29:31.496][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:29:31.496][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:29:31.496][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:29:31.582][DEBUG] [PHD2 Listener Thread] Unknown object from PHD2: {"Event":"SettleBegin","Timestamp":1551302971.532,"Host":"JGL2_2","Inst":1}
[02/27/19 21:29:31.597][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:29:31.597][DEBUG] [Sequence Thread] EventMarker 173 - t:m81 (1); e:3; f:8; o:
[02/27/19 21:29:31.599][DEBUG] [Sequence Thread] User has elected to skip guider settling over time...
[02/27/19 21:29:31.599][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Attempting to settle the auto guider...
[02/27/19 21:29:31.599][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Attempting to settle the auto guider...)...
[02/27/19 21:29:31.599][DEBUG] [Sequence Thread] Waiting for Auto Guider distance to fall below 0.5
[02/27/19 21:29:31.599][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:29:31.599][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:29:31.605][DEBUG] [Sequence Thread] Distance is below 0.5, starting timer...
[02/27/19 21:29:32.106][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:29:32.106][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:29:32.121][DEBUG] [Sequence Thread] Distance stayed below 0.5 for 0 seconds, done settling...
[02/27/19 21:29:32.122][DEBUG] [Sequence Thread] Auto guider has settled...
[02/27/19 21:29:32.122][DEBUG] [Sequence Thread] EventMarker 8 - t:m81 (1); e:3; f:8; o:
[02/27/19 21:29:32.122][DEBUG] [Sequence Thread] EventMarker 9 - t:m81 (1); e:3; f:8; o:
[02/27/19 21:29:32.122][DEBUG] [Sequence Thread] EventMarker 10 - t:m81 (1); e:3; f:8; o:
[02/27/19 21:29:32.122][DEBUG] [Sequence Thread] Finished sending frame capture.  Entering wait mode...
[02/27/19 21:29:32.122][DEBUG] [Sequence Thread] EventMarker 11 - t:m81 (1); e:3; f:8; o:
[02/27/19 21:29:32.122][DEBUG] [Sequence Thread] EventMarker 12 - t:m81 (1); e:3; f:8; o:
[02/27/19 21:29:32.126][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE message received...
[02/27/19 21:29:32.126][DEBUG] [Camera Thread] SetAscomGain to 76
[02/27/19 21:29:32.127][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Starting integration of m81; Event 4; Frame 9 for 90s...
[02/27/19 21:29:32.127][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Starting integration of m81; Event 4; Frame 9 for 90s...)...
[02/27/19 21:29:32.127][DEBUG] [Camera Thread] Camera gain set to 76
[02/27/19 21:29:32.127][DEBUG] [Camera Thread] SetAscomNormalSpeed... 
[02/27/19 21:29:32.127][DEBUG] [Camera Thread] Cannot set readout speed, not supported by camera...
[02/27/19 21:29:32.127][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, TimedError): (2019-02-25) Failure while integrating m81; Event 4; Frame 9 for 90s. Image has not downloaded in alloted time period.
[02/27/19 21:29:32.127][DEBUG] [Sequence Thread] GNS: Sent timed event to GNS...
[02/27/19 21:29:32.138][DEBUG] [PHD2 Listener Thread] PHD2: Settle done received: GOOD
[02/27/19 21:29:32.142][DEBUG] [Sequence Thread] EventMarker 13 - t:m81 (1); e:3; f:8; o:
[02/27/19 21:30:33.544][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:30:33.556][DEBUG] [MF Update Thread] Performing serialize...
[02/27/19 21:31:02.289][DEBUG] [Sequence Thread] EventMarker 15 - t:m81 (1); e:3; f:8; o:
[02/27/19 21:31:02.294][DEBUG] [Sequence Thread] Waking from exposure time sleep period...
[02/27/19 21:31:02.294][DEBUG] [Sequence Thread] Checking to see if the CCD has a temp...
[02/27/19 21:31:02.294][DEBUG] [Sequence Thread] Saving the CCD temp...
[02/27/19 21:31:02.304][DEBUG] [Sequence Thread] Entering super dangerous loop to await image completion...
[02/27/19 21:31:02.308][DEBUG] [Sequence Thread] EventMarker 16 - t:m81 (1); e:3; f:8; o:
[02/27/19 21:32:35.153][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE complete...
[02/27/19 21:32:35.435][DEBUG] [Sequence Thread] EventMarker 17 - t:m81 (1); e:3; f:8; o:
[02/27/19 21:32:35.435][DEBUG] [Sequence Thread] Image reported as complete.  Continuing...
[02/27/19 21:32:35.435][DEBUG] [Sequence Thread] Collecting FITs headers...
[02/27/19 21:32:35.436][DEBUG] [Sequence Thread] ASCOM Camera: Could not get last exposure start time.  Reported as (unknown)
[02/27/19 21:32:35.436][DEBUG] [Sequence Thread] DATE-LOC time provided by SGPro (failed to retrieve valid entry from camera)...
[02/27/19 21:32:35.438][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info for last solve...
[02/27/19 21:32:35.438][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info from UI...
[02/27/19 21:32:35.438][DEBUG] [Sequence Thread] Clearing timed monitoring events...
[02/27/19 21:32:35.445][DEBUG] [Sequence Thread] Created full file name (file does not exist): C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\m81_Light_90sec_1x1__Red_gain_76_2019-02-27_212931_frame9_-15C.fit
[02/27/19 21:32:35.445][DEBUG] [Sequence Thread] SaveFileAscom: Start...
[02/27/19 21:32:35.445][DEBUG] [Sequence Thread] SaveFileAscom: Checking image data...
[02/27/19 21:32:35.445][DEBUG] [Sequence Thread] SaveFileAscom: Create normal preview bitmap...
[02/27/19 21:32:35.455][DEBUG] [Sequence Thread] SaveFileAscom: Locking preview bits...
[02/27/19 21:32:35.455][DEBUG] [Sequence Thread] SaveFileAscom: Validating file name...
[02/27/19 21:32:35.455][DEBUG] [Sequence Thread] SaveFileAscom: Starting byte traversal...
[02/27/19 21:32:35.630][DEBUG] [Sequence Thread] SaveFileAscom: Unlocking preview bits...
[02/27/19 21:32:35.630][DEBUG] [Sequence Thread] SaveFileAscom: Saving preview bitmap to disk...
[02/27/19 21:32:35.630][DEBUG] [Sequence Thread] SaveFileBmp16: Locking bitmap for disk write...
[02/27/19 21:32:35.630][DEBUG] [Sequence Thread] SaveFileBmp16: Opening file stream...
[02/27/19 21:32:35.631][DEBUG] [Sequence Thread] SaveFileBmp16: Writing FITS headers...
[02/27/19 21:32:35.631][DEBUG] [Sequence Thread] SaveFileBmp16: Traversing and persisting bitmap data...
[02/27/19 21:32:35.804][DEBUG] [Sequence Thread] SaveFileBmp16: FITS block fill...
[02/27/19 21:32:35.804][DEBUG] [Sequence Thread] SaveFileBmp16: Unlocking bitmap...
[02/27/19 21:32:35.804][DEBUG] [Sequence Thread] SaveFileBmp16: Closing file stream
[02/27/19 21:32:35.808][DEBUG] [Sequence Thread] SaveFileAscom: Displaying image preview in UI...
[02/27/19 21:32:35.808][DEBUG] [Sequence Thread] Internal Interface: Set Preview...
[02/27/19 21:32:35.808][DEBUG] [Sequence Thread] Display image preview using asynch task...
[02/27/19 21:32:36.509][DEBUG] [Sequence Thread] SaveFileAscom: Done
[02/27/19 21:32:36.509][DEBUG] [Sequence Thread] =========== Save file took 1070 ms
[02/27/19 21:32:36.509][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Image "m81_Light_90sec_1x1__Red_gain_76_2019-02-27_212931_frame9_-15C.fit" saved.  HFR = 2.61.
[02/27/19 21:32:36.509][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Image "m81_Light_90sec_1x1__Red_gain_76_2019-02-27_212931_frame9_-15C.fit" saved.  HFR = 2.61.)...
[02/27/19 21:32:36.513][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:32:36.513][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:3; f:8; o:
[02/27/19 21:32:36.513][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:32:36.513][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:32:36.513][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:32:36.613][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:32:36.613][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:32:36.613][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:3; f:8; o:
[02/27/19 21:32:36.613][DEBUG] [Sequence Thread] EventMarker 18 - t:m81 (1); e:3; f:8; o:
[02/27/19 21:32:36.619][DEBUG] [Sequence Thread] EventMarker 19 - t:m81 (1); e:3; f:9; o:
[02/27/19 21:32:36.619][DEBUG] [Sequence Thread] EventMarker 20 - t:m81 (1); e:3; f:9; o:
[02/27/19 21:32:36.619][DEBUG] [Sequence Thread] Running post event...
[02/27/19 21:32:36.619][DEBUG] [Sequence Thread] EventMarker 21 - t:m81 (1); e:3; f:9; o:
[02/27/19 21:32:36.622][DEBUG] [Sequence Thread] Incremented numComplete (9) for event[3]...
[02/27/19 21:32:36.623][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:32:36.623][DEBUG] [Sequence Thread] Current event[3] frame count: 9/60...
[02/27/19 21:32:36.623][DEBUG] [Sequence Thread] Looking at event[4]...
[02/27/19 21:32:36.623][DEBUG] [Sequence Thread] Found event event[4] with remaining frames.
[02/27/19 21:32:36.623][DEBUG] [Sequence Thread] Event[4] frame count: 8/60...
[02/27/19 21:32:36.623][DEBUG] [Sequence Thread] Getting next event (4)...
[02/27/19 21:32:36.623][DEBUG] [Sequence Thread] Checking for auto manual focus (post)...
[02/27/19 21:32:36.624][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:32:36.636][DEBUG] [Sequence Thread] Attempting to move to next event...
[02/27/19 21:32:36.636][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:32:36.636][DEBUG] [Sequence Thread] Current event[3] frame count: 9/60...
[02/27/19 21:32:36.636][DEBUG] [Sequence Thread] Looking at event[4]...
[02/27/19 21:32:36.636][DEBUG] [Sequence Thread] Found event event[4] with remaining frames.
[02/27/19 21:32:36.636][DEBUG] [Sequence Thread] Event[4] frame count: 8/60...
[02/27/19 21:32:36.636][DEBUG] [Sequence Thread] Getting next event (4)...
[02/27/19 21:32:36.636][DEBUG] [Sequence Thread] Running pre event...
[02/27/19 21:32:36.661][DEBUG] [Sequence Thread] Current target has end time at 28/02/2019 06:30:00
[02/27/19 21:32:36.661][DEBUG] [Sequence Thread] End time of next frame is at 27/02/2019 21:34:06
[02/27/19 21:32:36.661][DEBUG] [Sequence Thread] Target is still before end time, continuing...
[02/27/19 21:32:36.661][DEBUG] [Sequence Thread] Running capture event...
[02/27/19 21:32:36.666][DEBUG] [Sequence Thread] ------------- Starting capture frame for event[4] -------------
[02/27/19 21:32:36.672][DEBUG] [Sequence Thread] Sending commands...
[02/27/19 21:32:36.672][DEBUG] [Sequence Thread] SetFlatBox: Frame Type is Light
[02/27/19 21:32:36.672][DEBUG] [Sequence Thread] EventMarker 2 - t:m81 (1); e:4; f:8; o:
[02/27/19 21:32:36.672][DEBUG] [Sequence Thread] Checking if Meridian Flip is needed
[02/27/19 21:32:36.672][DEBUG] [Sequence Thread] Telescope is on the West side of the mount
[02/27/19 21:32:36.672][DEBUG] [Sequence Thread] Meridian Flip not needed, Hour Angle < Degrees Past To Flip: -33.1909080957235 < 0
[02/27/19 21:32:36.672][DEBUG] [Sequence Thread] EventMarker 3 - t:m81 (1); e:4; f:8; o:
[02/27/19 21:32:36.672][DEBUG] [Sequence Thread] EventMarker 4 - t:m81 (1); e:4; f:8; o:
[02/27/19 21:32:36.672][DEBUG] [Sequence Thread] Setting filter position 3...
[02/27/19 21:32:36.678][DEBUG] [Sequence Thread] Setting filter: Green...
[02/27/19 21:32:36.678][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 1...
[02/27/19 21:32:36.678][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 1 is complete...
[02/27/19 21:32:36.881][DEBUG] [Sequence Thread] Adjust focuser pos per filter: Moving focsuer to focus position (64679)...
[02/27/19 21:32:36.881][DEBUG] [Sequence Thread] Adjust focuser pos per filter
[02/27/19 21:32:36.881][DEBUG] [Sequence Thread] Old filter: Red; Focus pos: 64697
[02/27/19 21:32:36.881][DEBUG] [Sequence Thread] New filter: Green; Focus pos: 64679
[02/27/19 21:32:36.881][DEBUG] [Sequence Thread] Pos delta: -18 steps
[02/27/19 21:32:36.881][DEBUG] [Sequence Thread] New position-> (current: 4845) + (delta: -18) = 4827
[02/27/19 21:32:36.881][DEBUG] [Sequence Thread] Focuser moving to 4827
[02/27/19 21:32:37.643][DEBUG] [Sequence Thread] Focuser move call complete
[02/27/19 21:32:37.665][DEBUG] [Sequence Thread] Focuser position matches requested position (4827), continuing...
[02/27/19 21:32:37.665][DEBUG] [Sequence Thread] focuser move is complete...
[02/27/19 21:32:37.667][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 2...
[02/27/19 21:32:39.668][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 2 complete...
[02/27/19 21:32:39.682][DEBUG] [Sequence Thread] EventMarker 5 - t:m81 (1); e:4; f:8; o:
[02/27/19 21:32:39.682][DEBUG] [Sequence Thread] Checking for auto manual focus (pre)...
[02/27/19 21:32:39.682][DEBUG] [Sequence Thread] EventMarker 6 - t:m81 (1); e:4; f:8; o:
[02/27/19 21:32:39.691][DEBUG] [Sequence Thread] Autoguider will not dither this frame. Total frames is not a modulus of 5
[02/27/19 21:32:39.691][DEBUG] [Sequence Thread] EventMarker 1 - t:m81 (1); e:4; f:8; o:
[02/27/19 21:32:39.692][DEBUG] [Sequence Thread] Created base name for frame capture: m81_Light_90sec_1x1__Green_gain_76_2019-02-27_213239_frame9_-15C
[02/27/19 21:32:39.692][DEBUG] [Sequence Thread] Created directory for frame capture: C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\
[02/27/19 21:32:39.692][DEBUG] [Sequence Thread] EventMarker 7 - t:m81 (1); e:4; f:8; o:
[02/27/19 21:32:39.692][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:32:39.692][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:4; f:8; o:
[02/27/19 21:32:39.692][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:32:39.692][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:32:39.692][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:32:39.794][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:32:39.794][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:32:39.794][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:4; f:8; o:
[02/27/19 21:32:39.794][DEBUG] [Sequence Thread] {"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}
[02/27/19 21:32:39.794][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}

[02/27/19 21:32:39.794][DEBUG] [Sequence Thread] EventMarker 172 - t:m81 (1); e:4; f:8; o:
[02/27/19 21:32:39.794][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:32:39.794][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:32:39.794][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:32:39.854][DEBUG] [PHD2 Listener Thread] Unknown object from PHD2: {"Event":"SettleBegin","Timestamp":1551303159.804,"Host":"JGL2_2","Inst":1}
[02/27/19 21:32:39.895][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:32:39.895][DEBUG] [Sequence Thread] EventMarker 173 - t:m81 (1); e:4; f:8; o:
[02/27/19 21:32:39.900][DEBUG] [Sequence Thread] User has elected to skip guider settling over time...
[02/27/19 21:32:39.900][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Attempting to settle the auto guider...
[02/27/19 21:32:39.900][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Attempting to settle the auto guider...)...
[02/27/19 21:32:39.900][DEBUG] [Sequence Thread] Waiting for Auto Guider distance to fall below 0.5
[02/27/19 21:32:39.900][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:32:39.900][DEBUG] [Sequence Thread] PHD2 distance request returned 0.2...
[02/27/19 21:32:39.907][DEBUG] [Sequence Thread] Distance is below 0.5, starting timer...
[02/27/19 21:32:40.107][DEBUG] [PHD2 Listener Thread] PHD2: Settle done received: GOOD
[02/27/19 21:32:40.407][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:32:40.407][DEBUG] [Sequence Thread] PHD2 distance request returned 0.2...
[02/27/19 21:32:40.414][DEBUG] [Sequence Thread] Distance stayed below 0.5 for 0 seconds, done settling...
[02/27/19 21:32:40.415][DEBUG] [Sequence Thread] Auto guider has settled...
[02/27/19 21:32:40.415][DEBUG] [Sequence Thread] EventMarker 8 - t:m81 (1); e:4; f:8; o:
[02/27/19 21:32:40.415][DEBUG] [Sequence Thread] EventMarker 9 - t:m81 (1); e:4; f:8; o:
[02/27/19 21:32:40.415][DEBUG] [Sequence Thread] EventMarker 10 - t:m81 (1); e:4; f:8; o:
[02/27/19 21:32:40.415][DEBUG] [Sequence Thread] Finished sending frame capture.  Entering wait mode...
[02/27/19 21:32:40.415][DEBUG] [Sequence Thread] EventMarker 11 - t:m81 (1); e:4; f:8; o:
[02/27/19 21:32:40.416][DEBUG] [Sequence Thread] EventMarker 12 - t:m81 (1); e:4; f:8; o:
[02/27/19 21:32:40.420][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE message received...
[02/27/19 21:32:40.420][DEBUG] [Camera Thread] SetAscomGain to 76
[02/27/19 21:32:40.421][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Starting integration of m81; Event 5; Frame 9 for 90s...
[02/27/19 21:32:40.421][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Starting integration of m81; Event 5; Frame 9 for 90s...)...
[02/27/19 21:32:40.421][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, TimedError): (2019-02-25) Failure while integrating m81; Event 5; Frame 9 for 90s. Image has not downloaded in alloted time period.
[02/27/19 21:32:40.421][DEBUG] [Sequence Thread] GNS: Sent timed event to GNS...
[02/27/19 21:32:40.421][DEBUG] [Camera Thread] Camera gain set to 76
[02/27/19 21:32:40.421][DEBUG] [Camera Thread] SetAscomNormalSpeed... 
[02/27/19 21:32:40.421][DEBUG] [Camera Thread] Cannot set readout speed, not supported by camera...
[02/27/19 21:32:40.422][DEBUG] [Sequence Thread] EventMarker 13 - t:m81 (1); e:4; f:8; o:
[02/27/19 21:33:23.005][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:33:23.021][DEBUG] [MF Update Thread] Performing serialize...
[02/27/19 21:34:10.607][DEBUG] [Sequence Thread] EventMarker 15 - t:m81 (1); e:4; f:8; o:
[02/27/19 21:34:10.610][DEBUG] [Sequence Thread] Waking from exposure time sleep period...
[02/27/19 21:34:10.610][DEBUG] [Sequence Thread] Checking to see if the CCD has a temp...
[02/27/19 21:34:10.610][DEBUG] [Sequence Thread] Saving the CCD temp...
[02/27/19 21:34:10.615][DEBUG] [Sequence Thread] Entering super dangerous loop to await image completion...
[02/27/19 21:34:10.618][DEBUG] [Sequence Thread] EventMarker 16 - t:m81 (1); e:4; f:8; o:
[02/27/19 21:34:11.663][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE complete...
[02/27/19 21:34:12.197][DEBUG] [Sequence Thread] EventMarker 17 - t:m81 (1); e:4; f:8; o:
[02/27/19 21:34:12.197][DEBUG] [Sequence Thread] Image reported as complete.  Continuing...
[02/27/19 21:34:12.197][DEBUG] [Sequence Thread] Collecting FITs headers...
[02/27/19 21:34:12.198][DEBUG] [Sequence Thread] ASCOM Camera: Could not get last exposure start time.  Reported as (unknown)
[02/27/19 21:34:12.198][DEBUG] [Sequence Thread] DATE-LOC time provided by SGPro (failed to retrieve valid entry from camera)...
[02/27/19 21:34:12.199][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info for last solve...
[02/27/19 21:34:12.199][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info from UI...
[02/27/19 21:34:12.206][DEBUG] [Sequence Thread] Clearing timed monitoring events...
[02/27/19 21:34:12.210][DEBUG] [Sequence Thread] Created full file name (file does not exist): C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\m81_Light_90sec_1x1__Green_gain_76_2019-02-27_213239_frame9_-15C.fit
[02/27/19 21:34:12.210][DEBUG] [Sequence Thread] SaveFileAscom: Start...
[02/27/19 21:34:12.210][DEBUG] [Sequence Thread] SaveFileAscom: Checking image data...
[02/27/19 21:34:12.210][DEBUG] [Sequence Thread] SaveFileAscom: Create normal preview bitmap...
[02/27/19 21:34:12.217][DEBUG] [Sequence Thread] SaveFileAscom: Locking preview bits...
[02/27/19 21:34:12.217][DEBUG] [Sequence Thread] SaveFileAscom: Validating file name...
[02/27/19 21:34:12.217][DEBUG] [Sequence Thread] SaveFileAscom: Starting byte traversal...
[02/27/19 21:34:12.392][DEBUG] [Sequence Thread] SaveFileAscom: Unlocking preview bits...
[02/27/19 21:34:12.392][DEBUG] [Sequence Thread] SaveFileAscom: Saving preview bitmap to disk...
[02/27/19 21:34:12.392][DEBUG] [Sequence Thread] SaveFileBmp16: Locking bitmap for disk write...
[02/27/19 21:34:12.392][DEBUG] [Sequence Thread] SaveFileBmp16: Opening file stream...
[02/27/19 21:34:12.393][DEBUG] [Sequence Thread] SaveFileBmp16: Writing FITS headers...
[02/27/19 21:34:12.393][DEBUG] [Sequence Thread] SaveFileBmp16: Traversing and persisting bitmap data...
[02/27/19 21:34:12.568][DEBUG] [Sequence Thread] SaveFileBmp16: FITS block fill...
[02/27/19 21:34:12.568][DEBUG] [Sequence Thread] SaveFileBmp16: Unlocking bitmap...
[02/27/19 21:34:12.568][DEBUG] [Sequence Thread] SaveFileBmp16: Closing file stream
[02/27/19 21:34:12.572][DEBUG] [Sequence Thread] SaveFileAscom: Displaying image preview in UI...
[02/27/19 21:34:12.572][DEBUG] [Sequence Thread] Internal Interface: Set Preview...
[02/27/19 21:34:12.572][DEBUG] [Sequence Thread] Display image preview using asynch task...
[02/27/19 21:34:13.517][DEBUG] [Sequence Thread] SaveFileAscom: Done
[02/27/19 21:34:13.517][DEBUG] [Sequence Thread] =========== Save file took 1310 ms
[02/27/19 21:34:13.517][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Image "m81_Light_90sec_1x1__Green_gain_76_2019-02-27_213239_frame9_-15C.fit" saved.  HFR = 2.61.
[02/27/19 21:34:13.517][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Image "m81_Light_90sec_1x1__Green_gain_76_2019-02-27_213239_frame9_-15C.fit" saved.  HFR = 2.61.)...
[02/27/19 21:34:13.521][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:34:13.521][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:4; f:8; o:
[02/27/19 21:34:13.521][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:34:13.521][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:34:13.521][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:34:13.622][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:34:13.622][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:34:13.622][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:4; f:8; o:
[02/27/19 21:34:13.622][DEBUG] [Sequence Thread] EventMarker 18 - t:m81 (1); e:4; f:8; o:
[02/27/19 21:34:13.630][DEBUG] [Sequence Thread] EventMarker 19 - t:m81 (1); e:4; f:9; o:
[02/27/19 21:34:13.630][DEBUG] [Sequence Thread] EventMarker 20 - t:m81 (1); e:4; f:9; o:
[02/27/19 21:34:13.630][DEBUG] [Sequence Thread] Running post event...
[02/27/19 21:34:13.630][DEBUG] [Sequence Thread] EventMarker 21 - t:m81 (1); e:4; f:9; o:
[02/27/19 21:34:13.633][DEBUG] [Sequence Thread] Incremented numComplete (9) for event[4]...
[02/27/19 21:34:13.637][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:34:13.637][DEBUG] [Sequence Thread] Current event[4] frame count: 9/60...
[02/27/19 21:34:13.637][DEBUG] [Sequence Thread] Looking at event[5]...
[02/27/19 21:34:13.637][DEBUG] [Sequence Thread] Looking at event[0]...
[02/27/19 21:34:13.637][DEBUG] [Sequence Thread] Found event event[0] with remaining frames.
[02/27/19 21:34:13.637][DEBUG] [Sequence Thread] Event[0] frame count: 39/120...
[02/27/19 21:34:13.637][DEBUG] [Sequence Thread] Getting next event (0)...
[02/27/19 21:34:13.637][DEBUG] [Sequence Thread] Checking for auto manual focus (post)...
[02/27/19 21:34:13.638][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:34:13.650][DEBUG] [Sequence Thread] Attempting to move to next event...
[02/27/19 21:34:13.650][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:34:13.650][DEBUG] [Sequence Thread] Current event[4] frame count: 9/60...
[02/27/19 21:34:13.650][DEBUG] [Sequence Thread] Looking at event[5]...
[02/27/19 21:34:13.650][DEBUG] [Sequence Thread] Looking at event[0]...
[02/27/19 21:34:13.650][DEBUG] [Sequence Thread] Found event event[0] with remaining frames.
[02/27/19 21:34:13.650][DEBUG] [Sequence Thread] Event[0] frame count: 39/120...
[02/27/19 21:34:13.650][DEBUG] [Sequence Thread] Getting next event (0)...
[02/27/19 21:34:13.650][DEBUG] [Sequence Thread] Running pre event...
[02/27/19 21:34:13.663][DEBUG] [Sequence Thread] Current target has end time at 28/02/2019 06:30:00
[02/27/19 21:34:13.663][DEBUG] [Sequence Thread] End time of next frame is at 27/02/2019 21:34:43
[02/27/19 21:34:13.663][DEBUG] [Sequence Thread] Target is still before end time, continuing...
[02/27/19 21:34:13.663][DEBUG] [Sequence Thread] Running capture event...
[02/27/19 21:34:13.665][DEBUG] [Sequence Thread] ------------- Starting capture frame for event[0] -------------
[02/27/19 21:34:13.671][DEBUG] [Sequence Thread] Sending commands...
[02/27/19 21:34:13.671][DEBUG] [Sequence Thread] SetFlatBox: Frame Type is Light
[02/27/19 21:34:13.671][DEBUG] [Sequence Thread] EventMarker 2 - t:m81 (1); e:0; f:39; o:
[02/27/19 21:34:13.671][DEBUG] [Sequence Thread] Checking if Meridian Flip is needed
[02/27/19 21:34:13.671][DEBUG] [Sequence Thread] Telescope is on the West side of the mount
[02/27/19 21:34:13.671][DEBUG] [Sequence Thread] Meridian Flip not needed, Hour Angle < Degrees Past To Flip: -32.7819984746848 < 0
[02/27/19 21:34:13.671][DEBUG] [Sequence Thread] EventMarker 3 - t:m81 (1); e:0; f:39; o:
[02/27/19 21:34:13.671][DEBUG] [Sequence Thread] EventMarker 4 - t:m81 (1); e:0; f:39; o:
[02/27/19 21:34:13.671][DEBUG] [Sequence Thread] Setting filter position 1...
[02/27/19 21:34:13.677][DEBUG] [Sequence Thread] Setting filter: Lum...
[02/27/19 21:34:13.677][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 1...
[02/27/19 21:34:13.677][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 1 is complete...
[02/27/19 21:34:13.880][DEBUG] [Sequence Thread] Adjust focuser pos per filter: Moving focsuer to focus position (64700)...
[02/27/19 21:34:13.880][DEBUG] [Sequence Thread] Adjust focuser pos per filter
[02/27/19 21:34:13.880][DEBUG] [Sequence Thread] Old filter: Green; Focus pos: 64679
[02/27/19 21:34:13.880][DEBUG] [Sequence Thread] New filter: Lum; Focus pos: 64700
[02/27/19 21:34:13.880][DEBUG] [Sequence Thread] Pos delta: 21 steps
[02/27/19 21:34:13.880][DEBUG] [Sequence Thread] New position-> (current: 4827) + (delta: 21) = 4848
[02/27/19 21:34:13.880][DEBUG] [Sequence Thread] Focuser moving to 4848
[02/27/19 21:34:14.632][DEBUG] [Sequence Thread] Focuser move call complete
[02/27/19 21:34:14.643][DEBUG] [Sequence Thread] Focuser position matches requested position (4848), continuing...
[02/27/19 21:34:14.643][DEBUG] [Sequence Thread] focuser move is complete...
[02/27/19 21:34:14.646][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 2...
[02/27/19 21:34:17.648][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 2 complete...
[02/27/19 21:34:17.660][DEBUG] [Sequence Thread] EventMarker 5 - t:m81 (1); e:0; f:39; o:
[02/27/19 21:34:17.660][DEBUG] [Sequence Thread] Checking for auto manual focus (pre)...
[02/27/19 21:34:17.660][DEBUG] [Sequence Thread] EventMarker 6 - t:m81 (1); e:0; f:39; o:
[02/27/19 21:34:17.669][DEBUG] [Sequence Thread] Autoguider will not dither this frame. Total frames is not a modulus of 5
[02/27/19 21:34:17.669][DEBUG] [Sequence Thread] EventMarker 1 - t:m81 (1); e:0; f:39; o:
[02/27/19 21:34:17.670][DEBUG] [Sequence Thread] Created base name for frame capture: m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_213417_frame40_-15C
[02/27/19 21:34:17.670][DEBUG] [Sequence Thread] Created directory for frame capture: C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\
[02/27/19 21:34:17.670][DEBUG] [Sequence Thread] EventMarker 7 - t:m81 (1); e:0; f:39; o:
[02/27/19 21:34:17.670][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:34:17.670][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:0; f:39; o:
[02/27/19 21:34:17.670][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:34:17.670][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:34:17.670][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:34:17.770][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:34:17.770][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:34:17.770][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:0; f:39; o:
[02/27/19 21:34:17.770][DEBUG] [Sequence Thread] {"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}
[02/27/19 21:34:17.770][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}

[02/27/19 21:34:17.770][DEBUG] [Sequence Thread] EventMarker 172 - t:m81 (1); e:0; f:39; o:
[02/27/19 21:34:17.770][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:34:17.770][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:34:17.770][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:34:17.861][DEBUG] [PHD2 Listener Thread] Unknown object from PHD2: {"Event":"SettleBegin","Timestamp":1551303257.811,"Host":"JGL2_2","Inst":1}
[02/27/19 21:34:17.871][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:34:17.871][DEBUG] [Sequence Thread] EventMarker 173 - t:m81 (1); e:0; f:39; o:
[02/27/19 21:34:17.872][DEBUG] [Sequence Thread] User has elected to skip guider settling over time...
[02/27/19 21:34:17.872][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Attempting to settle the auto guider...
[02/27/19 21:34:17.872][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Attempting to settle the auto guider...)...
[02/27/19 21:34:17.872][DEBUG] [Sequence Thread] Waiting for Auto Guider distance to fall below 0.5
[02/27/19 21:34:17.872][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:34:17.872][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:34:17.880][DEBUG] [Sequence Thread] Distance is below 0.5, starting timer...
[02/27/19 21:34:18.113][DEBUG] [PHD2 Listener Thread] PHD2: Settle done received: GOOD
[02/27/19 21:34:18.381][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:34:18.381][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:34:18.393][DEBUG] [Sequence Thread] Distance stayed below 0.5 for 0 seconds, done settling...
[02/27/19 21:34:18.394][DEBUG] [Sequence Thread] Auto guider has settled...
[02/27/19 21:34:18.394][DEBUG] [Sequence Thread] EventMarker 8 - t:m81 (1); e:0; f:39; o:
[02/27/19 21:34:18.394][DEBUG] [Sequence Thread] EventMarker 9 - t:m81 (1); e:0; f:39; o:
[02/27/19 21:34:18.394][DEBUG] [Sequence Thread] EventMarker 10 - t:m81 (1); e:0; f:39; o:
[02/27/19 21:34:18.394][DEBUG] [Sequence Thread] Finished sending frame capture.  Entering wait mode...
[02/27/19 21:34:18.394][DEBUG] [Sequence Thread] EventMarker 11 - t:m81 (1); e:0; f:39; o:
[02/27/19 21:34:18.395][DEBUG] [Sequence Thread] EventMarker 12 - t:m81 (1); e:0; f:39; o:
[02/27/19 21:34:18.398][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE message received...
[02/27/19 21:34:18.400][DEBUG] [Camera Thread] SetAscomGain to 76
[02/27/19 21:34:18.401][DEBUG] [Camera Thread] Camera gain set to 76
[02/27/19 21:34:18.401][DEBUG] [Camera Thread] SetAscomNormalSpeed... 
[02/27/19 21:34:18.401][DEBUG] [Camera Thread] Cannot set readout speed, not supported by camera...
[02/27/19 21:34:18.406][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Starting integration of m81; Event 1; Frame 40 for 30s...
[02/27/19 21:34:18.406][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Starting integration of m81; Event 1; Frame 40 for 30s...)...
[02/27/19 21:34:18.406][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, TimedError): (2019-02-25) Failure while integrating m81; Event 1; Frame 40 for 30s. Image has not downloaded in alloted time period.
[02/27/19 21:34:18.406][DEBUG] [Sequence Thread] GNS: Sent timed event to GNS...
[02/27/19 21:34:18.408][DEBUG] [Sequence Thread] EventMarker 13 - t:m81 (1); e:0; f:39; o:
[02/27/19 21:34:46.596][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:34:46.614][DEBUG] [MF Update Thread] Performing serialize...
[02/27/19 21:34:48.617][DEBUG] [Sequence Thread] EventMarker 15 - t:m81 (1); e:0; f:39; o:
[02/27/19 21:34:48.621][DEBUG] [Sequence Thread] Waking from exposure time sleep period...
[02/27/19 21:34:48.623][DEBUG] [Sequence Thread] Checking to see if the CCD has a temp...
[02/27/19 21:34:48.623][DEBUG] [Sequence Thread] Saving the CCD temp...
[02/27/19 21:34:48.626][DEBUG] [Sequence Thread] Entering super dangerous loop to await image completion...
[02/27/19 21:34:48.628][DEBUG] [Sequence Thread] EventMarker 16 - t:m81 (1); e:0; f:39; o:
[02/27/19 21:34:49.538][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE complete...
[02/27/19 21:34:49.634][DEBUG] [Sequence Thread] EventMarker 17 - t:m81 (1); e:0; f:39; o:
[02/27/19 21:34:49.634][DEBUG] [Sequence Thread] Image reported as complete.  Continuing...
[02/27/19 21:34:49.634][DEBUG] [Sequence Thread] Collecting FITs headers...
[02/27/19 21:34:49.635][DEBUG] [Sequence Thread] ASCOM Camera: Could not get last exposure start time.  Reported as (unknown)
[02/27/19 21:34:49.635][DEBUG] [Sequence Thread] DATE-LOC time provided by SGPro (failed to retrieve valid entry from camera)...
[02/27/19 21:34:49.637][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info for last solve...
[02/27/19 21:34:49.637][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info from UI...
[02/27/19 21:34:49.637][DEBUG] [Sequence Thread] Clearing timed monitoring events...
[02/27/19 21:34:49.641][DEBUG] [Sequence Thread] Created full file name (file does not exist): C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_213417_frame40_-15C.fit
[02/27/19 21:34:49.641][DEBUG] [Sequence Thread] SaveFileAscom: Start...
[02/27/19 21:34:49.641][DEBUG] [Sequence Thread] SaveFileAscom: Checking image data...
[02/27/19 21:34:49.641][DEBUG] [Sequence Thread] SaveFileAscom: Create normal preview bitmap...
[02/27/19 21:34:49.647][DEBUG] [Sequence Thread] SaveFileAscom: Locking preview bits...
[02/27/19 21:34:49.647][DEBUG] [Sequence Thread] SaveFileAscom: Validating file name...
[02/27/19 21:34:49.647][DEBUG] [Sequence Thread] SaveFileAscom: Starting byte traversal...
[02/27/19 21:34:49.812][DEBUG] [Sequence Thread] SaveFileAscom: Unlocking preview bits...
[02/27/19 21:34:49.812][DEBUG] [Sequence Thread] SaveFileAscom: Saving preview bitmap to disk...
[02/27/19 21:34:49.812][DEBUG] [Sequence Thread] SaveFileBmp16: Locking bitmap for disk write...
[02/27/19 21:34:49.812][DEBUG] [Sequence Thread] SaveFileBmp16: Opening file stream...
[02/27/19 21:34:49.812][DEBUG] [Sequence Thread] SaveFileBmp16: Writing FITS headers...
[02/27/19 21:34:49.813][DEBUG] [Sequence Thread] SaveFileBmp16: Traversing and persisting bitmap data...
[02/27/19 21:34:49.976][DEBUG] [Sequence Thread] SaveFileBmp16: FITS block fill...
[02/27/19 21:34:49.976][DEBUG] [Sequence Thread] SaveFileBmp16: Unlocking bitmap...
[02/27/19 21:34:49.976][DEBUG] [Sequence Thread] SaveFileBmp16: Closing file stream
[02/27/19 21:34:49.977][DEBUG] [Sequence Thread] SaveFileAscom: Displaying image preview in UI...
[02/27/19 21:34:49.977][DEBUG] [Sequence Thread] Internal Interface: Set Preview...
[02/27/19 21:34:49.977][DEBUG] [Sequence Thread] Display image preview using asynch task...
[02/27/19 21:34:50.718][DEBUG] [Sequence Thread] SaveFileAscom: Done
[02/27/19 21:34:50.718][DEBUG] [Sequence Thread] =========== Save file took 1081 ms
[02/27/19 21:34:50.719][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_213417_frame40_-15C.fit" saved.  HFR = 2.61.
[02/27/19 21:34:50.719][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_213417_frame40_-15C.fit" saved.  HFR = 2.61.)...
[02/27/19 21:34:50.728][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:34:50.728][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:0; f:39; o:
[02/27/19 21:34:50.728][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:34:50.728][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:34:50.728][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:34:50.829][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:34:50.829][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:34:50.829][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:0; f:39; o:
[02/27/19 21:34:50.829][DEBUG] [Sequence Thread] EventMarker 18 - t:m81 (1); e:0; f:39; o:
[02/27/19 21:34:50.855][DEBUG] [Sequence Thread] EventMarker 19 - t:m81 (1); e:0; f:40; o:
[02/27/19 21:34:50.855][DEBUG] [Sequence Thread] EventMarker 20 - t:m81 (1); e:0; f:40; o:
[02/27/19 21:34:50.855][DEBUG] [Sequence Thread] Running post event...
[02/27/19 21:34:50.855][DEBUG] [Sequence Thread] EventMarker 21 - t:m81 (1); e:0; f:40; o:
[02/27/19 21:34:50.860][DEBUG] [Sequence Thread] Incremented numComplete (40) for event[0]...
[02/27/19 21:34:50.862][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:34:50.862][DEBUG] [Sequence Thread] Current event[0] frame count: 40/120...
[02/27/19 21:34:50.862][DEBUG] [Sequence Thread] Looking at event[1]...
[02/27/19 21:34:50.862][DEBUG] [Sequence Thread] Found event event[1] with remaining frames.
[02/27/19 21:34:50.862][DEBUG] [Sequence Thread] Event[1] frame count: 8/120...
[02/27/19 21:34:50.862][DEBUG] [Sequence Thread] Getting next event (1)...
[02/27/19 21:34:50.862][DEBUG] [Sequence Thread] Checking for auto manual focus (post)...
[02/27/19 21:34:50.862][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:34:50.873][DEBUG] [Sequence Thread] Attempting to move to next event...
[02/27/19 21:34:50.873][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:34:50.873][DEBUG] [Sequence Thread] Current event[0] frame count: 40/120...
[02/27/19 21:34:50.873][DEBUG] [Sequence Thread] Looking at event[1]...
[02/27/19 21:34:50.873][DEBUG] [Sequence Thread] Found event event[1] with remaining frames.
[02/27/19 21:34:50.873][DEBUG] [Sequence Thread] Event[1] frame count: 8/120...
[02/27/19 21:34:50.873][DEBUG] [Sequence Thread] Getting next event (1)...
[02/27/19 21:34:50.873][DEBUG] [Sequence Thread] Running pre event...
[02/27/19 21:34:50.886][DEBUG] [Sequence Thread] Current target has end time at 28/02/2019 06:30:00
[02/27/19 21:34:50.886][DEBUG] [Sequence Thread] End time of next frame is at 27/02/2019 21:35:20
[02/27/19 21:34:50.886][DEBUG] [Sequence Thread] Target is still before end time, continuing...
[02/27/19 21:34:50.886][DEBUG] [Sequence Thread] Running capture event...
[02/27/19 21:34:50.888][DEBUG] [Sequence Thread] ------------- Starting capture frame for event[1] -------------
[02/27/19 21:34:50.894][DEBUG] [Sequence Thread] Sending commands...
[02/27/19 21:34:50.894][DEBUG] [Sequence Thread] SetFlatBox: Frame Type is Light
[02/27/19 21:34:50.894][DEBUG] [Sequence Thread] EventMarker 2 - t:m81 (1); e:1; f:8; o:
[02/27/19 21:34:50.894][DEBUG] [Sequence Thread] Checking if Meridian Flip is needed
[02/27/19 21:34:50.894][DEBUG] [Sequence Thread] Telescope is on the West side of the mount
[02/27/19 21:34:50.894][DEBUG] [Sequence Thread] Meridian Flip not needed, Hour Angle < Degrees Past To Flip: -32.6264930406909 < 0
[02/27/19 21:34:50.894][DEBUG] [Sequence Thread] EventMarker 3 - t:m81 (1); e:1; f:8; o:
[02/27/19 21:34:50.894][DEBUG] [Sequence Thread] EventMarker 4 - t:m81 (1); e:1; f:8; o:
[02/27/19 21:34:50.894][DEBUG] [Sequence Thread] Setting filter position 1...
[02/27/19 21:34:50.894][DEBUG] [Sequence Thread] Filter position 1 is already set.  Skipping...
[02/27/19 21:34:50.894][DEBUG] [Sequence Thread] EventMarker 5 - t:m81 (1); e:1; f:8; o:
[02/27/19 21:34:50.894][DEBUG] [Sequence Thread] Checking for auto manual focus (pre)...
[02/27/19 21:34:50.894][DEBUG] [Sequence Thread] EventMarker 6 - t:m81 (1); e:1; f:8; o:
[02/27/19 21:34:50.904][DEBUG] [Sequence Thread] Running dither...
[02/27/19 21:34:50.913][DEBUG] [Sequence Thread] PHD2 dither request: 1...
[02/27/19 21:34:50.913][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:34:50.913][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:34:50.913][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:34:51.014][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:34:52.014][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:34:52.014][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:34:52.014][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:34:52.115][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:34:53.115][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:34:53.115][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:34:53.115][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:34:53.216][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:34:54.216][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:34:54.216][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:34:54.216][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:34:54.317][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:34:55.317][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:34:55.317][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:34:55.317][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:34:55.417][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:34:55.417][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:34:55.417][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:34:55.417][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:34:55.518][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:34:55.518][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "dither", "params": [1, false, {"pixels": 0.5, "time": 0, "timeout": 600}], "id": 1002}

[02/27/19 21:34:55.520][DEBUG] [Sequence Thread] EventMarker 1 - t:m81 (1); e:1; f:8; o:
[02/27/19 21:34:55.520][DEBUG] [Sequence Thread] Created base name for frame capture: m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_213455_frame9_-15C
[02/27/19 21:34:55.521][DEBUG] [Sequence Thread] Created directory for frame capture: C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\
[02/27/19 21:34:55.521][DEBUG] [Sequence Thread] EventMarker 7 - t:m81 (1); e:1; f:8; o:
[02/27/19 21:34:55.521][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:34:55.521][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:1; f:8; o:
[02/27/19 21:34:55.521][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:34:55.521][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:34:55.521][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:34:55.578][DEBUG] [PHD2 Listener Thread] Unknown object from PHD2: {"Event":"SettleBegin","Timestamp":1551303295.532,"Host":"JGL2_2","Inst":1}
[02/27/19 21:34:55.621][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:34:55.621][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:34:55.621][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:1; f:8; o:
[02/27/19 21:34:55.621][DEBUG] [Sequence Thread] {"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}
[02/27/19 21:34:55.621][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}

[02/27/19 21:34:55.622][DEBUG] [Sequence Thread] EventMarker 172 - t:m81 (1); e:1; f:8; o:
[02/27/19 21:34:55.622][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:34:55.622][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:34:55.622][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:34:55.679][DEBUG] [PHD2 Listener Thread] Error received from RPC: Cannot initiate guide while dither is in progress
[02/27/19 21:34:55.722][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:34:55.722][DEBUG] [Sequence Thread] EventMarker 173 - t:m81 (1); e:1; f:8; o:
[02/27/19 21:34:55.723][DEBUG] [Sequence Thread] User has elected to skip guider settling over time...
[02/27/19 21:34:55.723][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Attempting to settle the auto guider...
[02/27/19 21:34:55.723][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Attempting to settle the auto guider...)...
[02/27/19 21:34:55.723][DEBUG] [Sequence Thread] Waiting for Auto Guider distance to fall below 0.5
[02/27/19 21:34:55.723][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:34:55.723][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:34:55.734][DEBUG] [Sequence Thread] Distance is below 0.5, starting timer...
[02/27/19 21:34:56.082][DEBUG] [PHD2 Listener Thread] PHD2: Settle done received: GOOD
[02/27/19 21:34:56.235][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:34:56.235][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:34:56.246][DEBUG] [Sequence Thread] Distance stayed below 0.5 for 0 seconds, done settling...
[02/27/19 21:34:56.247][DEBUG] [Sequence Thread] Auto guider has settled...
[02/27/19 21:34:56.247][DEBUG] [Sequence Thread] EventMarker 8 - t:m81 (1); e:1; f:8; o:
[02/27/19 21:34:56.247][DEBUG] [Sequence Thread] EventMarker 9 - t:m81 (1); e:1; f:8; o:
[02/27/19 21:34:56.247][DEBUG] [Sequence Thread] EventMarker 10 - t:m81 (1); e:1; f:8; o:
[02/27/19 21:34:56.247][DEBUG] [Sequence Thread] Finished sending frame capture.  Entering wait mode...
[02/27/19 21:34:56.247][DEBUG] [Sequence Thread] EventMarker 11 - t:m81 (1); e:1; f:8; o:
[02/27/19 21:34:56.248][DEBUG] [Sequence Thread] EventMarker 12 - t:m81 (1); e:1; f:8; o:
[02/27/19 21:34:56.256][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE message received...
[02/27/19 21:34:56.257][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Starting integration of m81; Event 2; Frame 9 for 30s...
[02/27/19 21:34:56.257][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Starting integration of m81; Event 2; Frame 9 for 30s...)...
[02/27/19 21:34:56.258][DEBUG] [Camera Thread] SetAscomGain to 76
[02/27/19 21:34:56.258][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, TimedError): (2019-02-25) Failure while integrating m81; Event 2; Frame 9 for 30s. Image has not downloaded in alloted time period.
[02/27/19 21:34:56.258][DEBUG] [Sequence Thread] GNS: Sent timed event to GNS...
[02/27/19 21:34:56.259][DEBUG] [Camera Thread] Camera gain set to 76
[02/27/19 21:34:56.259][DEBUG] [Camera Thread] SetAscomNormalSpeed... 
[02/27/19 21:34:56.259][DEBUG] [Camera Thread] Cannot set readout speed, not supported by camera...
[02/27/19 21:34:56.259][DEBUG] [Sequence Thread] EventMarker 13 - t:m81 (1); e:1; f:8; o:
[02/27/19 21:35:26.425][DEBUG] [Sequence Thread] EventMarker 15 - t:m81 (1); e:1; f:8; o:
[02/27/19 21:35:26.428][DEBUG] [Sequence Thread] Waking from exposure time sleep period...
[02/27/19 21:35:26.429][DEBUG] [Sequence Thread] Checking to see if the CCD has a temp...
[02/27/19 21:35:26.429][DEBUG] [Sequence Thread] Saving the CCD temp...
[02/27/19 21:35:26.436][DEBUG] [Sequence Thread] Entering super dangerous loop to await image completion...
[02/27/19 21:35:26.439][DEBUG] [Sequence Thread] EventMarker 16 - t:m81 (1); e:1; f:8; o:
[02/27/19 21:35:27.391][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE complete...
[02/27/19 21:35:27.442][DEBUG] [Sequence Thread] EventMarker 17 - t:m81 (1); e:1; f:8; o:
[02/27/19 21:35:27.442][DEBUG] [Sequence Thread] Image reported as complete.  Continuing...
[02/27/19 21:35:27.442][DEBUG] [Sequence Thread] Collecting FITs headers...
[02/27/19 21:35:27.443][DEBUG] [Sequence Thread] ASCOM Camera: Could not get last exposure start time.  Reported as (unknown)
[02/27/19 21:35:27.443][DEBUG] [Sequence Thread] DATE-LOC time provided by SGPro (failed to retrieve valid entry from camera)...
[02/27/19 21:35:27.444][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info for last solve...
[02/27/19 21:35:27.444][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info from UI...
[02/27/19 21:35:27.445][DEBUG] [Sequence Thread] Clearing timed monitoring events...
[02/27/19 21:35:27.449][DEBUG] [Sequence Thread] Created full file name (file does not exist): C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_213455_frame9_-15C.fit
[02/27/19 21:35:27.449][DEBUG] [Sequence Thread] SaveFileAscom: Start...
[02/27/19 21:35:27.449][DEBUG] [Sequence Thread] SaveFileAscom: Checking image data...
[02/27/19 21:35:27.449][DEBUG] [Sequence Thread] SaveFileAscom: Create normal preview bitmap...
[02/27/19 21:35:27.456][DEBUG] [Sequence Thread] SaveFileAscom: Locking preview bits...
[02/27/19 21:35:27.456][DEBUG] [Sequence Thread] SaveFileAscom: Validating file name...
[02/27/19 21:35:27.456][DEBUG] [Sequence Thread] SaveFileAscom: Starting byte traversal...
[02/27/19 21:35:27.621][DEBUG] [Sequence Thread] SaveFileAscom: Unlocking preview bits...
[02/27/19 21:35:27.621][DEBUG] [Sequence Thread] SaveFileAscom: Saving preview bitmap to disk...
[02/27/19 21:35:27.621][DEBUG] [Sequence Thread] SaveFileBmp16: Locking bitmap for disk write...
[02/27/19 21:35:27.621][DEBUG] [Sequence Thread] SaveFileBmp16: Opening file stream...
[02/27/19 21:35:27.629][DEBUG] [Sequence Thread] SaveFileBmp16: Writing FITS headers...
[02/27/19 21:35:27.629][DEBUG] [Sequence Thread] SaveFileBmp16: Traversing and persisting bitmap data...
[02/27/19 21:35:27.787][DEBUG] [Sequence Thread] SaveFileBmp16: FITS block fill...
[02/27/19 21:35:27.787][DEBUG] [Sequence Thread] SaveFileBmp16: Unlocking bitmap...
[02/27/19 21:35:27.787][DEBUG] [Sequence Thread] SaveFileBmp16: Closing file stream
[02/27/19 21:35:27.791][DEBUG] [Sequence Thread] SaveFileAscom: Displaying image preview in UI...
[02/27/19 21:35:27.791][DEBUG] [Sequence Thread] Internal Interface: Set Preview...
[02/27/19 21:35:27.791][DEBUG] [Sequence Thread] Display image preview using asynch task...
[02/27/19 21:35:28.843][DEBUG] [Sequence Thread] SaveFileAscom: Done
[02/27/19 21:35:28.843][DEBUG] [Sequence Thread] =========== Save file took 1398 ms
[02/27/19 21:35:28.843][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_213455_frame9_-15C.fit" saved.  HFR = 2.61.
[02/27/19 21:35:28.843][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_213455_frame9_-15C.fit" saved.  HFR = 2.61.)...
[02/27/19 21:35:28.848][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:35:28.848][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:1; f:8; o:
[02/27/19 21:35:28.848][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:35:28.848][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:35:28.848][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:35:28.948][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:35:28.948][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:35:28.948][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:1; f:8; o:
[02/27/19 21:35:28.948][DEBUG] [Sequence Thread] EventMarker 18 - t:m81 (1); e:1; f:8; o:
[02/27/19 21:35:28.957][DEBUG] [Sequence Thread] EventMarker 19 - t:m81 (1); e:1; f:9; o:
[02/27/19 21:35:28.957][DEBUG] [Sequence Thread] EventMarker 20 - t:m81 (1); e:1; f:9; o:
[02/27/19 21:35:28.957][DEBUG] [Sequence Thread] Running post event...
[02/27/19 21:35:28.957][DEBUG] [Sequence Thread] EventMarker 21 - t:m81 (1); e:1; f:9; o:
[02/27/19 21:35:28.960][DEBUG] [Sequence Thread] Incremented numComplete (9) for event[1]...
[02/27/19 21:35:28.965][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:35:28.965][DEBUG] [Sequence Thread] Current event[1] frame count: 9/120...
[02/27/19 21:35:28.965][DEBUG] [Sequence Thread] Looking at event[2]...
[02/27/19 21:35:28.965][DEBUG] [Sequence Thread] Found event event[2] with remaining frames.
[02/27/19 21:35:28.965][DEBUG] [Sequence Thread] Event[2] frame count: 9/60...
[02/27/19 21:35:28.965][DEBUG] [Sequence Thread] Getting next event (2)...
[02/27/19 21:35:28.965][DEBUG] [Sequence Thread] Checking for auto manual focus (post)...
[02/27/19 21:35:28.965][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:35:28.977][DEBUG] [Sequence Thread] Attempting to move to next event...
[02/27/19 21:35:28.977][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:35:28.977][DEBUG] [Sequence Thread] Current event[1] frame count: 9/120...
[02/27/19 21:35:28.977][DEBUG] [Sequence Thread] Looking at event[2]...
[02/27/19 21:35:28.977][DEBUG] [Sequence Thread] Found event event[2] with remaining frames.
[02/27/19 21:35:28.977][DEBUG] [Sequence Thread] Event[2] frame count: 9/60...
[02/27/19 21:35:28.977][DEBUG] [Sequence Thread] Getting next event (2)...
[02/27/19 21:35:28.977][DEBUG] [Sequence Thread] Running pre event...
[02/27/19 21:35:29.004][DEBUG] [Sequence Thread] Current target has end time at 28/02/2019 06:30:00
[02/27/19 21:35:29.004][DEBUG] [Sequence Thread] End time of next frame is at 27/02/2019 21:36:59
[02/27/19 21:35:29.004][DEBUG] [Sequence Thread] Target is still before end time, continuing...
[02/27/19 21:35:29.004][DEBUG] [Sequence Thread] Running capture event...
[02/27/19 21:35:29.005][DEBUG] [Sequence Thread] ------------- Starting capture frame for event[2] -------------
[02/27/19 21:35:29.011][DEBUG] [Sequence Thread] Sending commands...
[02/27/19 21:35:29.011][DEBUG] [Sequence Thread] SetFlatBox: Frame Type is Light
[02/27/19 21:35:29.011][DEBUG] [Sequence Thread] EventMarker 2 - t:m81 (1); e:2; f:9; o:
[02/27/19 21:35:29.011][DEBUG] [Sequence Thread] Checking if Meridian Flip is needed
[02/27/19 21:35:29.011][DEBUG] [Sequence Thread] Telescope is on the West side of the mount
[02/27/19 21:35:29.011][DEBUG] [Sequence Thread] Meridian Flip not needed, Hour Angle < Degrees Past To Flip: -32.4709876071624 < 0
[02/27/19 21:35:29.011][DEBUG] [Sequence Thread] EventMarker 3 - t:m81 (1); e:2; f:9; o:
[02/27/19 21:35:29.011][DEBUG] [Sequence Thread] EventMarker 4 - t:m81 (1); e:2; f:9; o:
[02/27/19 21:35:29.011][DEBUG] [Sequence Thread] Setting filter position 4...
[02/27/19 21:35:29.017][DEBUG] [Sequence Thread] Setting filter: Blue...
[02/27/19 21:35:29.017][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 1...
[02/27/19 21:35:29.017][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 1 is complete...
[02/27/19 21:35:29.220][DEBUG] [Sequence Thread] Adjust focuser pos per filter: Moving focsuer to focus position (64704)...
[02/27/19 21:35:29.220][DEBUG] [Sequence Thread] Adjust focuser pos per filter
[02/27/19 21:35:29.220][DEBUG] [Sequence Thread] Old filter: Lum; Focus pos: 64700
[02/27/19 21:35:29.220][DEBUG] [Sequence Thread] New filter: Blue; Focus pos: 64704
[02/27/19 21:35:29.220][DEBUG] [Sequence Thread] Pos delta: 4 steps
[02/27/19 21:35:29.220][DEBUG] [Sequence Thread] New position-> (current: 4848) + (delta: 4) = 4852
[02/27/19 21:35:29.220][DEBUG] [Sequence Thread] Focuser moving to 4852
[02/27/19 21:35:29.839][DEBUG] [Sequence Thread] Focuser move call complete
[02/27/19 21:35:30.062][DEBUG] [Sequence Thread] Focuser position matches requested position (4852), continuing...
[02/27/19 21:35:30.062][DEBUG] [Sequence Thread] focuser move is complete...
[02/27/19 21:35:30.064][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 2...
[02/27/19 21:35:32.066][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 2 complete...
[02/27/19 21:35:32.079][DEBUG] [Sequence Thread] EventMarker 5 - t:m81 (1); e:2; f:9; o:
[02/27/19 21:35:32.080][DEBUG] [Sequence Thread] Checking for auto manual focus (pre)...
[02/27/19 21:35:32.080][DEBUG] [Sequence Thread] EventMarker 6 - t:m81 (1); e:2; f:9; o:
[02/27/19 21:35:32.089][DEBUG] [Sequence Thread] Autoguider will not dither this frame. Total frames is not a modulus of 5
[02/27/19 21:35:32.089][DEBUG] [Sequence Thread] EventMarker 1 - t:m81 (1); e:2; f:9; o:
[02/27/19 21:35:32.090][DEBUG] [Sequence Thread] Created base name for frame capture: m81_Light_90sec_1x1__Blue_gain_76_2019-02-27_213532_frame10_-15C
[02/27/19 21:35:32.090][DEBUG] [Sequence Thread] Created directory for frame capture: C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\
[02/27/19 21:35:32.090][DEBUG] [Sequence Thread] EventMarker 7 - t:m81 (1); e:2; f:9; o:
[02/27/19 21:35:32.090][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:35:32.090][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:2; f:9; o:
[02/27/19 21:35:32.090][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:35:32.090][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:35:32.090][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:35:32.191][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:35:32.191][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:35:32.191][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:2; f:9; o:
[02/27/19 21:35:32.191][DEBUG] [Sequence Thread] {"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}
[02/27/19 21:35:32.191][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}

[02/27/19 21:35:32.191][DEBUG] [Sequence Thread] EventMarker 172 - t:m81 (1); e:2; f:9; o:
[02/27/19 21:35:32.191][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:35:32.191][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:35:32.191][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:35:32.251][DEBUG] [PHD2 Listener Thread] Unknown object from PHD2: {"Event":"SettleBegin","Timestamp":1551303332.200,"Host":"JGL2_2","Inst":1}
[02/27/19 21:35:32.292][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:35:32.292][DEBUG] [Sequence Thread] EventMarker 173 - t:m81 (1); e:2; f:9; o:
[02/27/19 21:35:32.292][DEBUG] [Sequence Thread] User has elected to skip guider settling over time...
[02/27/19 21:35:32.292][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Attempting to settle the auto guider...
[02/27/19 21:35:32.292][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Attempting to settle the auto guider...)...
[02/27/19 21:35:32.292][DEBUG] [Sequence Thread] Waiting for Auto Guider distance to fall below 0.5
[02/27/19 21:35:32.292][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:35:32.292][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:35:32.303][DEBUG] [Sequence Thread] Distance is below 0.5, starting timer...
[02/27/19 21:35:32.803][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:35:32.803][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:35:33.124][DEBUG] [Sequence Thread] Distance stayed below 0.5 for 0 seconds, done settling...
[02/27/19 21:35:33.127][DEBUG] [Sequence Thread] Auto guider has settled...
[02/27/19 21:35:33.127][DEBUG] [Sequence Thread] EventMarker 8 - t:m81 (1); e:2; f:9; o:
[02/27/19 21:35:33.127][DEBUG] [Sequence Thread] EventMarker 9 - t:m81 (1); e:2; f:9; o:
[02/27/19 21:35:33.127][DEBUG] [Sequence Thread] EventMarker 10 - t:m81 (1); e:2; f:9; o:
[02/27/19 21:35:33.127][DEBUG] [Sequence Thread] Finished sending frame capture.  Entering wait mode...
[02/27/19 21:35:33.127][DEBUG] [Sequence Thread] EventMarker 11 - t:m81 (1); e:2; f:9; o:
[02/27/19 21:35:33.128][DEBUG] [Sequence Thread] EventMarker 12 - t:m81 (1); e:2; f:9; o:
[02/27/19 21:35:33.130][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Starting integration of m81; Event 3; Frame 10 for 90s...
[02/27/19 21:35:33.130][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Starting integration of m81; Event 3; Frame 10 for 90s...)...
[02/27/19 21:35:33.131][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, TimedError): (2019-02-25) Failure while integrating m81; Event 3; Frame 10 for 90s. Image has not downloaded in alloted time period.
[02/27/19 21:35:33.131][DEBUG] [Sequence Thread] GNS: Sent timed event to GNS...
[02/27/19 21:35:33.132][DEBUG] [Sequence Thread] EventMarker 13 - t:m81 (1); e:2; f:9; o:
[02/27/19 21:35:33.135][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE message received...
[02/27/19 21:35:33.136][DEBUG] [Camera Thread] SetAscomGain to 76
[02/27/19 21:35:33.138][DEBUG] [Camera Thread] Camera gain set to 76
[02/27/19 21:35:33.138][DEBUG] [Camera Thread] SetAscomNormalSpeed... 
[02/27/19 21:35:33.138][DEBUG] [Camera Thread] Cannot set readout speed, not supported by camera...
[02/27/19 21:35:34.072][DEBUG] [PHD2 Listener Thread] PHD2: Settle done received: GOOD
[02/27/19 21:36:10.477][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:36:10.503][DEBUG] [MF Update Thread] Performing serialize...
[02/27/19 21:37:03.145][DEBUG] [Sequence Thread] EventMarker 15 - t:m81 (1); e:2; f:9; o:
[02/27/19 21:37:03.148][DEBUG] [Sequence Thread] Waking from exposure time sleep period...
[02/27/19 21:37:03.148][DEBUG] [Sequence Thread] Checking to see if the CCD has a temp...
[02/27/19 21:37:03.148][DEBUG] [Sequence Thread] Saving the CCD temp...
[02/27/19 21:37:03.154][DEBUG] [Sequence Thread] Entering super dangerous loop to await image completion...
[02/27/19 21:37:03.162][DEBUG] [Sequence Thread] EventMarker 16 - t:m81 (1); e:2; f:9; o:
[02/27/19 21:37:04.409][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE complete...
[02/27/19 21:37:04.667][DEBUG] [Sequence Thread] EventMarker 17 - t:m81 (1); e:2; f:9; o:
[02/27/19 21:37:04.667][DEBUG] [Sequence Thread] Image reported as complete.  Continuing...
[02/27/19 21:37:04.667][DEBUG] [Sequence Thread] Collecting FITs headers...
[02/27/19 21:37:04.668][DEBUG] [Sequence Thread] ASCOM Camera: Could not get last exposure start time.  Reported as (unknown)
[02/27/19 21:37:04.668][DEBUG] [Sequence Thread] DATE-LOC time provided by SGPro (failed to retrieve valid entry from camera)...
[02/27/19 21:37:04.668][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info for last solve...
[02/27/19 21:37:04.668][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info from UI...
[02/27/19 21:37:04.668][DEBUG] [Sequence Thread] Clearing timed monitoring events...
[02/27/19 21:37:04.672][DEBUG] [Sequence Thread] Created full file name (file does not exist): C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\m81_Light_90sec_1x1__Blue_gain_76_2019-02-27_213532_frame10_-15C.fit
[02/27/19 21:37:04.672][DEBUG] [Sequence Thread] SaveFileAscom: Start...
[02/27/19 21:37:04.672][DEBUG] [Sequence Thread] SaveFileAscom: Checking image data...
[02/27/19 21:37:04.672][DEBUG] [Sequence Thread] SaveFileAscom: Create normal preview bitmap...
[02/27/19 21:37:04.677][DEBUG] [Sequence Thread] SaveFileAscom: Locking preview bits...
[02/27/19 21:37:04.677][DEBUG] [Sequence Thread] SaveFileAscom: Validating file name...
[02/27/19 21:37:04.677][DEBUG] [Sequence Thread] SaveFileAscom: Starting byte traversal...
[02/27/19 21:37:04.857][DEBUG] [Sequence Thread] SaveFileAscom: Unlocking preview bits...
[02/27/19 21:37:04.857][DEBUG] [Sequence Thread] SaveFileAscom: Saving preview bitmap to disk...
[02/27/19 21:37:04.857][DEBUG] [Sequence Thread] SaveFileBmp16: Locking bitmap for disk write...
[02/27/19 21:37:04.857][DEBUG] [Sequence Thread] SaveFileBmp16: Opening file stream...
[02/27/19 21:37:04.857][DEBUG] [Sequence Thread] SaveFileBmp16: Writing FITS headers...
[02/27/19 21:37:04.858][DEBUG] [Sequence Thread] SaveFileBmp16: Traversing and persisting bitmap data...
[02/27/19 21:37:05.023][DEBUG] [Sequence Thread] SaveFileBmp16: FITS block fill...
[02/27/19 21:37:05.023][DEBUG] [Sequence Thread] SaveFileBmp16: Unlocking bitmap...
[02/27/19 21:37:05.023][DEBUG] [Sequence Thread] SaveFileBmp16: Closing file stream
[02/27/19 21:37:05.026][DEBUG] [Sequence Thread] SaveFileAscom: Displaying image preview in UI...
[02/27/19 21:37:05.026][DEBUG] [Sequence Thread] Internal Interface: Set Preview...
[02/27/19 21:37:05.026][DEBUG] [Sequence Thread] Display image preview using asynch task...
[02/27/19 21:37:05.989][DEBUG] [Sequence Thread] SaveFileAscom: Done
[02/27/19 21:37:05.989][DEBUG] [Sequence Thread] =========== Save file took 1320 ms
[02/27/19 21:37:05.989][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Image "m81_Light_90sec_1x1__Blue_gain_76_2019-02-27_213532_frame10_-15C.fit" saved.  HFR = 2.61.
[02/27/19 21:37:05.989][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Image "m81_Light_90sec_1x1__Blue_gain_76_2019-02-27_213532_frame10_-15C.fit" saved.  HFR = 2.61.)...
[02/27/19 21:37:05.993][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:37:05.993][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:2; f:9; o:
[02/27/19 21:37:05.993][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:37:05.993][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:37:05.993][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:37:06.194][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:37:06.194][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:37:06.194][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:2; f:9; o:
[02/27/19 21:37:06.194][DEBUG] [Sequence Thread] EventMarker 18 - t:m81 (1); e:2; f:9; o:
[02/27/19 21:37:06.201][DEBUG] [Sequence Thread] EventMarker 19 - t:m81 (1); e:2; f:10; o:
[02/27/19 21:37:06.201][DEBUG] [Sequence Thread] EventMarker 20 - t:m81 (1); e:2; f:10; o:
[02/27/19 21:37:06.201][DEBUG] [Sequence Thread] Running post event...
[02/27/19 21:37:06.201][DEBUG] [Sequence Thread] EventMarker 21 - t:m81 (1); e:2; f:10; o:
[02/27/19 21:37:06.204][DEBUG] [Sequence Thread] Incremented numComplete (10) for event[2]...
[02/27/19 21:37:06.211][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:37:06.211][DEBUG] [Sequence Thread] Current event[2] frame count: 10/60...
[02/27/19 21:37:06.211][DEBUG] [Sequence Thread] Looking at event[3]...
[02/27/19 21:37:06.211][DEBUG] [Sequence Thread] Found event event[3] with remaining frames.
[02/27/19 21:37:06.211][DEBUG] [Sequence Thread] Event[3] frame count: 9/60...
[02/27/19 21:37:06.211][DEBUG] [Sequence Thread] Getting next event (3)...
[02/27/19 21:37:06.211][DEBUG] [Sequence Thread] Checking for auto manual focus (post)...
[02/27/19 21:37:06.211][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:37:06.234][DEBUG] [Sequence Thread] Attempting to move to next event...
[02/27/19 21:37:06.234][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:37:06.234][DEBUG] [Sequence Thread] Current event[2] frame count: 10/60...
[02/27/19 21:37:06.234][DEBUG] [Sequence Thread] Looking at event[3]...
[02/27/19 21:37:06.234][DEBUG] [Sequence Thread] Found event event[3] with remaining frames.
[02/27/19 21:37:06.234][DEBUG] [Sequence Thread] Event[3] frame count: 9/60...
[02/27/19 21:37:06.234][DEBUG] [Sequence Thread] Getting next event (3)...
[02/27/19 21:37:06.234][DEBUG] [Sequence Thread] Running pre event...
[02/27/19 21:37:06.292][DEBUG] [Sequence Thread] Current target has end time at 28/02/2019 06:30:00
[02/27/19 21:37:06.292][DEBUG] [Sequence Thread] End time of next frame is at 27/02/2019 21:38:36
[02/27/19 21:37:06.292][DEBUG] [Sequence Thread] Target is still before end time, continuing...
[02/27/19 21:37:06.292][DEBUG] [Sequence Thread] Running capture event...
[02/27/19 21:37:06.294][DEBUG] [Sequence Thread] ------------- Starting capture frame for event[3] -------------
[02/27/19 21:37:06.306][DEBUG] [Sequence Thread] Sending commands...
[02/27/19 21:37:06.306][DEBUG] [Sequence Thread] SetFlatBox: Frame Type is Light
[02/27/19 21:37:06.306][DEBUG] [Sequence Thread] EventMarker 2 - t:m81 (1); e:3; f:9; o:
[02/27/19 21:37:06.306][DEBUG] [Sequence Thread] Checking if Meridian Flip is needed
[02/27/19 21:37:06.307][DEBUG] [Sequence Thread] Telescope is on the West side of the mount
[02/27/19 21:37:06.307][DEBUG] [Sequence Thread] Meridian Flip not needed, Hour Angle < Degrees Past To Flip: -32.0628696518589 < 0
[02/27/19 21:37:06.307][DEBUG] [Sequence Thread] EventMarker 3 - t:m81 (1); e:3; f:9; o:
[02/27/19 21:37:06.307][DEBUG] [Sequence Thread] EventMarker 4 - t:m81 (1); e:3; f:9; o:
[02/27/19 21:37:06.307][DEBUG] [Sequence Thread] Setting filter position 2...
[02/27/19 21:37:06.313][DEBUG] [Sequence Thread] Setting filter: Red...
[02/27/19 21:37:06.313][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 1...
[02/27/19 21:37:06.313][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 1 is complete...
[02/27/19 21:37:06.516][DEBUG] [Sequence Thread] Adjust focuser pos per filter: Moving focsuer to focus position (64697)...
[02/27/19 21:37:06.516][DEBUG] [Sequence Thread] Adjust focuser pos per filter
[02/27/19 21:37:06.516][DEBUG] [Sequence Thread] Old filter: Blue; Focus pos: 64704
[02/27/19 21:37:06.516][DEBUG] [Sequence Thread] New filter: Red; Focus pos: 64697
[02/27/19 21:37:06.516][DEBUG] [Sequence Thread] Pos delta: -7 steps
[02/27/19 21:37:06.516][DEBUG] [Sequence Thread] New position-> (current: 4852) + (delta: -7) = 4845
[02/27/19 21:37:06.516][DEBUG] [Sequence Thread] Focuser moving to 4845
[02/27/19 21:37:07.185][DEBUG] [Sequence Thread] Focuser move call complete
[02/27/19 21:37:07.459][DEBUG] [Sequence Thread] Focuser position matches requested position (4845), continuing...
[02/27/19 21:37:07.459][DEBUG] [Sequence Thread] focuser move is complete...
[02/27/19 21:37:07.472][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 2...
[02/27/19 21:37:10.474][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 2 complete...
[02/27/19 21:37:10.483][DEBUG] [Sequence Thread] EventMarker 5 - t:m81 (1); e:3; f:9; o:
[02/27/19 21:37:10.483][DEBUG] [Sequence Thread] Checking for auto manual focus (pre)...
[02/27/19 21:37:10.483][DEBUG] [Sequence Thread] EventMarker 6 - t:m81 (1); e:3; f:9; o:
[02/27/19 21:37:10.492][DEBUG] [Sequence Thread] Autoguider will not dither this frame. Total frames is not a modulus of 5
[02/27/19 21:37:10.492][DEBUG] [Sequence Thread] EventMarker 1 - t:m81 (1); e:3; f:9; o:
[02/27/19 21:37:10.492][DEBUG] [Sequence Thread] Created base name for frame capture: m81_Light_90sec_1x1__Red_gain_76_2019-02-27_213710_frame10_-15C
[02/27/19 21:37:10.492][DEBUG] [Sequence Thread] Created directory for frame capture: C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\
[02/27/19 21:37:10.492][DEBUG] [Sequence Thread] EventMarker 7 - t:m81 (1); e:3; f:9; o:
[02/27/19 21:37:10.492][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:37:10.492][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:3; f:9; o:
[02/27/19 21:37:10.492][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:37:10.492][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:37:10.492][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:37:10.594][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:37:10.594][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:37:10.594][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:3; f:9; o:
[02/27/19 21:37:10.594][DEBUG] [Sequence Thread] {"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}
[02/27/19 21:37:10.594][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}

[02/27/19 21:37:10.594][DEBUG] [Sequence Thread] EventMarker 172 - t:m81 (1); e:3; f:9; o:
[02/27/19 21:37:10.594][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:37:10.594][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:37:10.594][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:37:10.657][DEBUG] [PHD2 Listener Thread] Unknown object from PHD2: {"Event":"SettleBegin","Timestamp":1551303430.606,"Host":"JGL2_2","Inst":1}
[02/27/19 21:37:10.695][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:37:10.695][DEBUG] [Sequence Thread] EventMarker 173 - t:m81 (1); e:3; f:9; o:
[02/27/19 21:37:10.696][DEBUG] [Sequence Thread] User has elected to skip guider settling over time...
[02/27/19 21:37:10.696][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Attempting to settle the auto guider...
[02/27/19 21:37:10.696][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Attempting to settle the auto guider...)...
[02/27/19 21:37:10.696][DEBUG] [Sequence Thread] Waiting for Auto Guider distance to fall below 0.5
[02/27/19 21:37:10.696][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:37:10.696][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:37:10.703][DEBUG] [Sequence Thread] Distance is below 0.5, starting timer...
[02/27/19 21:37:11.203][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:37:11.203][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:37:11.215][DEBUG] [Sequence Thread] Distance stayed below 0.5 for 0 seconds, done settling...
[02/27/19 21:37:11.216][DEBUG] [Sequence Thread] Auto guider has settled...
[02/27/19 21:37:11.216][DEBUG] [Sequence Thread] EventMarker 8 - t:m81 (1); e:3; f:9; o:
[02/27/19 21:37:11.216][DEBUG] [Sequence Thread] EventMarker 9 - t:m81 (1); e:3; f:9; o:
[02/27/19 21:37:11.216][DEBUG] [Sequence Thread] EventMarker 10 - t:m81 (1); e:3; f:9; o:
[02/27/19 21:37:11.216][DEBUG] [Sequence Thread] Finished sending frame capture.  Entering wait mode...
[02/27/19 21:37:11.216][DEBUG] [Sequence Thread] EventMarker 11 - t:m81 (1); e:3; f:9; o:
[02/27/19 21:37:11.217][DEBUG] [Sequence Thread] EventMarker 12 - t:m81 (1); e:3; f:9; o:
[02/27/19 21:37:11.222][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE message received...
[02/27/19 21:37:11.223][DEBUG] [Camera Thread] SetAscomGain to 76
[02/27/19 21:37:11.224][DEBUG] [Camera Thread] Camera gain set to 76
[02/27/19 21:37:11.224][DEBUG] [Camera Thread] SetAscomNormalSpeed... 
[02/27/19 21:37:11.225][DEBUG] [Camera Thread] Cannot set readout speed, not supported by camera...
[02/27/19 21:37:11.226][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Starting integration of m81; Event 4; Frame 10 for 90s...
[02/27/19 21:37:11.226][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Starting integration of m81; Event 4; Frame 10 for 90s...)...
[02/27/19 21:37:11.226][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, TimedError): (2019-02-25) Failure while integrating m81; Event 4; Frame 10 for 90s. Image has not downloaded in alloted time period.
[02/27/19 21:37:11.226][DEBUG] [Sequence Thread] GNS: Sent timed event to GNS...
[02/27/19 21:37:11.229][DEBUG] [Sequence Thread] EventMarker 13 - t:m81 (1); e:3; f:9; o:
[02/27/19 21:37:12.273][DEBUG] [PHD2 Listener Thread] PHD2: Settle done received: GOOD
[02/27/19 21:37:34.312][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:37:34.324][DEBUG] [MF Update Thread] Performing serialize...
[02/27/19 21:38:41.312][DEBUG] [Sequence Thread] EventMarker 15 - t:m81 (1); e:3; f:9; o:
[02/27/19 21:38:41.314][DEBUG] [Sequence Thread] Waking from exposure time sleep period...
[02/27/19 21:38:41.314][DEBUG] [Sequence Thread] Checking to see if the CCD has a temp...
[02/27/19 21:38:41.314][DEBUG] [Sequence Thread] Saving the CCD temp...
[02/27/19 21:38:41.319][DEBUG] [Sequence Thread] Entering super dangerous loop to await image completion...
[02/27/19 21:38:41.321][DEBUG] [Sequence Thread] EventMarker 16 - t:m81 (1); e:3; f:9; o:
[02/27/19 21:38:42.463][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE complete...
[02/27/19 21:38:42.826][DEBUG] [Sequence Thread] EventMarker 17 - t:m81 (1); e:3; f:9; o:
[02/27/19 21:38:42.826][DEBUG] [Sequence Thread] Image reported as complete.  Continuing...
[02/27/19 21:38:42.826][DEBUG] [Sequence Thread] Collecting FITs headers...
[02/27/19 21:38:42.827][DEBUG] [Sequence Thread] ASCOM Camera: Could not get last exposure start time.  Reported as (unknown)
[02/27/19 21:38:42.827][DEBUG] [Sequence Thread] DATE-LOC time provided by SGPro (failed to retrieve valid entry from camera)...
[02/27/19 21:38:42.829][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info for last solve...
[02/27/19 21:38:42.829][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info from UI...
[02/27/19 21:38:42.829][DEBUG] [Sequence Thread] Clearing timed monitoring events...
[02/27/19 21:38:42.834][DEBUG] [Sequence Thread] Created full file name (file does not exist): C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\m81_Light_90sec_1x1__Red_gain_76_2019-02-27_213710_frame10_-15C.fit
[02/27/19 21:38:42.834][DEBUG] [Sequence Thread] SaveFileAscom: Start...
[02/27/19 21:38:42.834][DEBUG] [Sequence Thread] SaveFileAscom: Checking image data...
[02/27/19 21:38:42.834][DEBUG] [Sequence Thread] SaveFileAscom: Create normal preview bitmap...
[02/27/19 21:38:42.839][DEBUG] [Sequence Thread] SaveFileAscom: Locking preview bits...
[02/27/19 21:38:42.839][DEBUG] [Sequence Thread] SaveFileAscom: Validating file name...
[02/27/19 21:38:42.839][DEBUG] [Sequence Thread] SaveFileAscom: Starting byte traversal...
[02/27/19 21:38:42.994][DEBUG] [Sequence Thread] SaveFileAscom: Unlocking preview bits...
[02/27/19 21:38:42.994][DEBUG] [Sequence Thread] SaveFileAscom: Saving preview bitmap to disk...
[02/27/19 21:38:42.994][DEBUG] [Sequence Thread] SaveFileBmp16: Locking bitmap for disk write...
[02/27/19 21:38:42.994][DEBUG] [Sequence Thread] SaveFileBmp16: Opening file stream...
[02/27/19 21:38:42.994][DEBUG] [Sequence Thread] SaveFileBmp16: Writing FITS headers...
[02/27/19 21:38:42.994][DEBUG] [Sequence Thread] SaveFileBmp16: Traversing and persisting bitmap data...
[02/27/19 21:38:43.154][DEBUG] [Sequence Thread] SaveFileBmp16: FITS block fill...
[02/27/19 21:38:43.154][DEBUG] [Sequence Thread] SaveFileBmp16: Unlocking bitmap...
[02/27/19 21:38:43.154][DEBUG] [Sequence Thread] SaveFileBmp16: Closing file stream
[02/27/19 21:38:43.155][DEBUG] [Sequence Thread] SaveFileAscom: Displaying image preview in UI...
[02/27/19 21:38:43.155][DEBUG] [Sequence Thread] Internal Interface: Set Preview...
[02/27/19 21:38:43.155][DEBUG] [Sequence Thread] Display image preview using asynch task...
[02/27/19 21:38:44.071][DEBUG] [Sequence Thread] SaveFileAscom: Done
[02/27/19 21:38:44.071][DEBUG] [Sequence Thread] =========== Save file took 1240 ms
[02/27/19 21:38:44.071][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Image "m81_Light_90sec_1x1__Red_gain_76_2019-02-27_213710_frame10_-15C.fit" saved.  HFR = 2.61.
[02/27/19 21:38:44.071][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Image "m81_Light_90sec_1x1__Red_gain_76_2019-02-27_213710_frame10_-15C.fit" saved.  HFR = 2.61.)...
[02/27/19 21:38:44.079][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:38:44.079][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:3; f:9; o:
[02/27/19 21:38:44.079][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:38:44.079][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:38:44.079][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:38:44.180][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:38:44.180][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:38:44.180][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:3; f:9; o:
[02/27/19 21:38:44.181][DEBUG] [Sequence Thread] EventMarker 18 - t:m81 (1); e:3; f:9; o:
[02/27/19 21:38:44.184][DEBUG] [Sequence Thread] EventMarker 19 - t:m81 (1); e:3; f:10; o:
[02/27/19 21:38:44.184][DEBUG] [Sequence Thread] EventMarker 20 - t:m81 (1); e:3; f:10; o:
[02/27/19 21:38:44.184][DEBUG] [Sequence Thread] Running post event...
[02/27/19 21:38:44.184][DEBUG] [Sequence Thread] EventMarker 21 - t:m81 (1); e:3; f:10; o:
[02/27/19 21:38:44.190][DEBUG] [Sequence Thread] Incremented numComplete (10) for event[3]...
[02/27/19 21:38:44.198][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:38:44.198][DEBUG] [Sequence Thread] Current event[3] frame count: 10/60...
[02/27/19 21:38:44.198][DEBUG] [Sequence Thread] Looking at event[4]...
[02/27/19 21:38:44.198][DEBUG] [Sequence Thread] Found event event[4] with remaining frames.
[02/27/19 21:38:44.198][DEBUG] [Sequence Thread] Event[4] frame count: 9/60...
[02/27/19 21:38:44.198][DEBUG] [Sequence Thread] Getting next event (4)...
[02/27/19 21:38:44.198][DEBUG] [Sequence Thread] Checking for auto manual focus (post)...
[02/27/19 21:38:44.199][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:38:44.211][DEBUG] [Sequence Thread] Attempting to move to next event...
[02/27/19 21:38:44.211][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:38:44.211][DEBUG] [Sequence Thread] Current event[3] frame count: 10/60...
[02/27/19 21:38:44.211][DEBUG] [Sequence Thread] Looking at event[4]...
[02/27/19 21:38:44.211][DEBUG] [Sequence Thread] Found event event[4] with remaining frames.
[02/27/19 21:38:44.211][DEBUG] [Sequence Thread] Event[4] frame count: 9/60...
[02/27/19 21:38:44.211][DEBUG] [Sequence Thread] Getting next event (4)...
[02/27/19 21:38:44.211][DEBUG] [Sequence Thread] Running pre event...
[02/27/19 21:38:44.240][DEBUG] [Sequence Thread] Current target has end time at 28/02/2019 06:30:00
[02/27/19 21:38:44.240][DEBUG] [Sequence Thread] End time of next frame is at 27/02/2019 21:40:14
[02/27/19 21:38:44.241][DEBUG] [Sequence Thread] Target is still before end time, continuing...
[02/27/19 21:38:44.241][DEBUG] [Sequence Thread] Running capture event...
[02/27/19 21:38:44.242][DEBUG] [Sequence Thread] ------------- Starting capture frame for event[4] -------------
[02/27/19 21:38:44.249][DEBUG] [Sequence Thread] Sending commands...
[02/27/19 21:38:44.249][DEBUG] [Sequence Thread] SetFlatBox: Frame Type is Light
[02/27/19 21:38:44.249][DEBUG] [Sequence Thread] EventMarker 2 - t:m81 (1); e:4; f:9; o:
[02/27/19 21:38:44.249][DEBUG] [Sequence Thread] Checking if Meridian Flip is needed
[02/27/19 21:38:44.249][DEBUG] [Sequence Thread] Telescope is on the West side of the mount
[02/27/19 21:38:44.249][DEBUG] [Sequence Thread] Meridian Flip not needed, Hour Angle < Degrees Past To Flip: -31.6552933636878 < 0
[02/27/19 21:38:44.249][DEBUG] [Sequence Thread] EventMarker 3 - t:m81 (1); e:4; f:9; o:
[02/27/19 21:38:44.249][DEBUG] [Sequence Thread] EventMarker 4 - t:m81 (1); e:4; f:9; o:
[02/27/19 21:38:44.249][DEBUG] [Sequence Thread] Setting filter position 3...
[02/27/19 21:38:44.256][DEBUG] [Sequence Thread] Setting filter: Green...
[02/27/19 21:38:44.256][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 1...
[02/27/19 21:38:44.256][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 1 is complete...
[02/27/19 21:38:44.459][DEBUG] [Sequence Thread] Adjust focuser pos per filter: Moving focsuer to focus position (64679)...
[02/27/19 21:38:44.459][DEBUG] [Sequence Thread] Adjust focuser pos per filter
[02/27/19 21:38:44.459][DEBUG] [Sequence Thread] Old filter: Red; Focus pos: 64697
[02/27/19 21:38:44.459][DEBUG] [Sequence Thread] New filter: Green; Focus pos: 64679
[02/27/19 21:38:44.459][DEBUG] [Sequence Thread] Pos delta: -18 steps
[02/27/19 21:38:44.459][DEBUG] [Sequence Thread] New position-> (current: 4845) + (delta: -18) = 4827
[02/27/19 21:38:44.459][DEBUG] [Sequence Thread] Focuser moving to 4827
[02/27/19 21:38:45.217][DEBUG] [Sequence Thread] Focuser move call complete
[02/27/19 21:38:45.232][DEBUG] [Sequence Thread] Focuser position matches requested position (4827), continuing...
[02/27/19 21:38:45.232][DEBUG] [Sequence Thread] focuser move is complete...
[02/27/19 21:38:45.234][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 2...
[02/27/19 21:38:47.236][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 2 complete...
[02/27/19 21:38:47.249][DEBUG] [Sequence Thread] EventMarker 5 - t:m81 (1); e:4; f:9; o:
[02/27/19 21:38:47.249][DEBUG] [Sequence Thread] Checking for auto manual focus (pre)...
[02/27/19 21:38:47.249][DEBUG] [Sequence Thread] EventMarker 6 - t:m81 (1); e:4; f:9; o:
[02/27/19 21:38:47.269][DEBUG] [Sequence Thread] Autoguider will not dither this frame. Total frames is not a modulus of 5
[02/27/19 21:38:47.269][DEBUG] [Sequence Thread] EventMarker 1 - t:m81 (1); e:4; f:9; o:
[02/27/19 21:38:47.270][DEBUG] [Sequence Thread] Created base name for frame capture: m81_Light_90sec_1x1__Green_gain_76_2019-02-27_213847_frame10_-15C
[02/27/19 21:38:47.270][DEBUG] [Sequence Thread] Created directory for frame capture: C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\
[02/27/19 21:38:47.270][DEBUG] [Sequence Thread] EventMarker 7 - t:m81 (1); e:4; f:9; o:
[02/27/19 21:38:47.270][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:38:47.270][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:4; f:9; o:
[02/27/19 21:38:47.270][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:38:47.270][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:38:47.270][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:38:47.370][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:38:47.370][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:38:47.370][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:4; f:9; o:
[02/27/19 21:38:47.371][DEBUG] [Sequence Thread] {"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}
[02/27/19 21:38:47.371][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}

[02/27/19 21:38:47.371][DEBUG] [Sequence Thread] EventMarker 172 - t:m81 (1); e:4; f:9; o:
[02/27/19 21:38:47.371][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:38:47.371][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:38:47.371][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:38:47.426][DEBUG] [PHD2 Listener Thread] Unknown object from PHD2: {"Event":"SettleBegin","Timestamp":1551303527.375,"Host":"JGL2_2","Inst":1}
[02/27/19 21:38:47.472][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:38:47.472][DEBUG] [Sequence Thread] EventMarker 173 - t:m81 (1); e:4; f:9; o:
[02/27/19 21:38:47.472][DEBUG] [Sequence Thread] User has elected to skip guider settling over time...
[02/27/19 21:38:47.472][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Attempting to settle the auto guider...
[02/27/19 21:38:47.472][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Attempting to settle the auto guider...)...
[02/27/19 21:38:47.472][DEBUG] [Sequence Thread] Waiting for Auto Guider distance to fall below 0.5
[02/27/19 21:38:47.472][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:38:47.472][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:38:47.481][DEBUG] [Sequence Thread] Distance is below 0.5, starting timer...
[02/27/19 21:38:47.982][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:38:47.982][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:38:47.985][DEBUG] [Sequence Thread] Distance stayed below 0.5 for 0 seconds, done settling...
[02/27/19 21:38:47.986][DEBUG] [Sequence Thread] Auto guider has settled...
[02/27/19 21:38:47.986][DEBUG] [Sequence Thread] EventMarker 8 - t:m81 (1); e:4; f:9; o:
[02/27/19 21:38:47.986][DEBUG] [Sequence Thread] EventMarker 9 - t:m81 (1); e:4; f:9; o:
[02/27/19 21:38:47.986][DEBUG] [Sequence Thread] EventMarker 10 - t:m81 (1); e:4; f:9; o:
[02/27/19 21:38:47.986][DEBUG] [Sequence Thread] Finished sending frame capture.  Entering wait mode...
[02/27/19 21:38:47.986][DEBUG] [Sequence Thread] EventMarker 11 - t:m81 (1); e:4; f:9; o:
[02/27/19 21:38:47.987][DEBUG] [Sequence Thread] EventMarker 12 - t:m81 (1); e:4; f:9; o:
[02/27/19 21:38:47.992][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Starting integration of m81; Event 5; Frame 10 for 90s...
[02/27/19 21:38:47.992][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Starting integration of m81; Event 5; Frame 10 for 90s...)...
[02/27/19 21:38:47.992][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, TimedError): (2019-02-25) Failure while integrating m81; Event 5; Frame 10 for 90s. Image has not downloaded in alloted time period.
[02/27/19 21:38:47.992][DEBUG] [Sequence Thread] GNS: Sent timed event to GNS...
[02/27/19 21:38:47.993][DEBUG] [Sequence Thread] EventMarker 13 - t:m81 (1); e:4; f:9; o:
[02/27/19 21:38:47.994][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE message received...
[02/27/19 21:38:47.994][DEBUG] [Camera Thread] SetAscomGain to 76
[02/27/19 21:38:47.995][DEBUG] [Camera Thread] Camera gain set to 76
[02/27/19 21:38:47.995][DEBUG] [Camera Thread] SetAscomNormalSpeed... 
[02/27/19 21:38:47.995][DEBUG] [Camera Thread] Cannot set readout speed, not supported by camera...
[02/27/19 21:38:48.032][DEBUG] [PHD2 Listener Thread] PHD2: Settle done received: GOOD
[02/27/19 21:38:58.994][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:38:59.018][DEBUG] [MF Update Thread] Performing serialize...
[02/27/19 21:40:18.183][DEBUG] [Sequence Thread] EventMarker 15 - t:m81 (1); e:4; f:9; o:
[02/27/19 21:40:18.187][DEBUG] [Sequence Thread] Waking from exposure time sleep period...
[02/27/19 21:40:18.188][DEBUG] [Sequence Thread] Checking to see if the CCD has a temp...
[02/27/19 21:40:18.188][DEBUG] [Sequence Thread] Saving the CCD temp...
[02/27/19 21:40:18.198][DEBUG] [Sequence Thread] Entering super dangerous loop to await image completion...
[02/27/19 21:40:18.201][DEBUG] [Sequence Thread] EventMarker 16 - t:m81 (1); e:4; f:9; o:
[02/27/19 21:40:19.243][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE complete...
[02/27/19 21:40:19.738][DEBUG] [Sequence Thread] EventMarker 17 - t:m81 (1); e:4; f:9; o:
[02/27/19 21:40:19.738][DEBUG] [Sequence Thread] Image reported as complete.  Continuing...
[02/27/19 21:40:19.738][DEBUG] [Sequence Thread] Collecting FITs headers...
[02/27/19 21:40:19.739][DEBUG] [Sequence Thread] ASCOM Camera: Could not get last exposure start time.  Reported as (unknown)
[02/27/19 21:40:19.739][DEBUG] [Sequence Thread] DATE-LOC time provided by SGPro (failed to retrieve valid entry from camera)...
[02/27/19 21:40:19.741][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info for last solve...
[02/27/19 21:40:19.741][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info from UI...
[02/27/19 21:40:19.741][DEBUG] [Sequence Thread] Clearing timed monitoring events...
[02/27/19 21:40:19.745][DEBUG] [Sequence Thread] Created full file name (file does not exist): C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\m81_Light_90sec_1x1__Green_gain_76_2019-02-27_213847_frame10_-15C.fit
[02/27/19 21:40:19.745][DEBUG] [Sequence Thread] SaveFileAscom: Start...
[02/27/19 21:40:19.745][DEBUG] [Sequence Thread] SaveFileAscom: Checking image data...
[02/27/19 21:40:19.745][DEBUG] [Sequence Thread] SaveFileAscom: Create normal preview bitmap...
[02/27/19 21:40:19.751][DEBUG] [Sequence Thread] SaveFileAscom: Locking preview bits...
[02/27/19 21:40:19.751][DEBUG] [Sequence Thread] SaveFileAscom: Validating file name...
[02/27/19 21:40:19.751][DEBUG] [Sequence Thread] SaveFileAscom: Starting byte traversal...
[02/27/19 21:40:19.930][DEBUG] [Sequence Thread] SaveFileAscom: Unlocking preview bits...
[02/27/19 21:40:19.930][DEBUG] [Sequence Thread] SaveFileAscom: Saving preview bitmap to disk...
[02/27/19 21:40:19.930][DEBUG] [Sequence Thread] SaveFileBmp16: Locking bitmap for disk write...
[02/27/19 21:40:19.930][DEBUG] [Sequence Thread] SaveFileBmp16: Opening file stream...
[02/27/19 21:40:19.930][DEBUG] [Sequence Thread] SaveFileBmp16: Writing FITS headers...
[02/27/19 21:40:19.930][DEBUG] [Sequence Thread] SaveFileBmp16: Traversing and persisting bitmap data...
[02/27/19 21:40:20.110][DEBUG] [Sequence Thread] SaveFileBmp16: FITS block fill...
[02/27/19 21:40:20.110][DEBUG] [Sequence Thread] SaveFileBmp16: Unlocking bitmap...
[02/27/19 21:40:20.110][DEBUG] [Sequence Thread] SaveFileBmp16: Closing file stream
[02/27/19 21:40:20.114][DEBUG] [Sequence Thread] SaveFileAscom: Displaying image preview in UI...
[02/27/19 21:40:20.114][DEBUG] [Sequence Thread] Internal Interface: Set Preview...
[02/27/19 21:40:20.114][DEBUG] [Sequence Thread] Display image preview using asynch task...
[02/27/19 21:40:20.968][DEBUG] [Sequence Thread] SaveFileAscom: Done
[02/27/19 21:40:20.968][DEBUG] [Sequence Thread] =========== Save file took 1226 ms
[02/27/19 21:40:20.968][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Image "m81_Light_90sec_1x1__Green_gain_76_2019-02-27_213847_frame10_-15C.fit" saved.  HFR = 2.61.
[02/27/19 21:40:20.968][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Image "m81_Light_90sec_1x1__Green_gain_76_2019-02-27_213847_frame10_-15C.fit" saved.  HFR = 2.61.)...
[02/27/19 21:40:20.972][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:40:20.972][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:4; f:9; o:
[02/27/19 21:40:20.972][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:40:20.972][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:40:20.972][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:40:21.073][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:40:21.073][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:40:21.073][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:4; f:9; o:
[02/27/19 21:40:21.073][DEBUG] [Sequence Thread] EventMarker 18 - t:m81 (1); e:4; f:9; o:
[02/27/19 21:40:21.079][DEBUG] [Sequence Thread] EventMarker 19 - t:m81 (1); e:4; f:10; o:
[02/27/19 21:40:21.079][DEBUG] [Sequence Thread] EventMarker 20 - t:m81 (1); e:4; f:10; o:
[02/27/19 21:40:21.079][DEBUG] [Sequence Thread] Running post event...
[02/27/19 21:40:21.079][DEBUG] [Sequence Thread] EventMarker 21 - t:m81 (1); e:4; f:10; o:
[02/27/19 21:40:21.083][DEBUG] [Sequence Thread] Incremented numComplete (10) for event[4]...
[02/27/19 21:40:21.085][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:40:21.085][DEBUG] [Sequence Thread] Current event[4] frame count: 10/60...
[02/27/19 21:40:21.085][DEBUG] [Sequence Thread] Looking at event[5]...
[02/27/19 21:40:21.085][DEBUG] [Sequence Thread] Looking at event[0]...
[02/27/19 21:40:21.085][DEBUG] [Sequence Thread] Found event event[0] with remaining frames.
[02/27/19 21:40:21.085][DEBUG] [Sequence Thread] Event[0] frame count: 40/120...
[02/27/19 21:40:21.085][DEBUG] [Sequence Thread] Getting next event (0)...
[02/27/19 21:40:21.085][DEBUG] [Sequence Thread] Checking for auto manual focus (post)...
[02/27/19 21:40:21.087][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:40:21.100][DEBUG] [Sequence Thread] Attempting to move to next event...
[02/27/19 21:40:21.100][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:40:21.100][DEBUG] [Sequence Thread] Current event[4] frame count: 10/60...
[02/27/19 21:40:21.100][DEBUG] [Sequence Thread] Looking at event[5]...
[02/27/19 21:40:21.100][DEBUG] [Sequence Thread] Looking at event[0]...
[02/27/19 21:40:21.100][DEBUG] [Sequence Thread] Found event event[0] with remaining frames.
[02/27/19 21:40:21.100][DEBUG] [Sequence Thread] Event[0] frame count: 40/120...
[02/27/19 21:40:21.100][DEBUG] [Sequence Thread] Getting next event (0)...
[02/27/19 21:40:21.100][DEBUG] [Sequence Thread] Running pre event...
[02/27/19 21:40:21.118][DEBUG] [Sequence Thread] Current target has end time at 28/02/2019 06:30:00
[02/27/19 21:40:21.118][DEBUG] [Sequence Thread] End time of next frame is at 27/02/2019 21:40:51
[02/27/19 21:40:21.118][DEBUG] [Sequence Thread] Target is still before end time, continuing...
[02/27/19 21:40:21.118][DEBUG] [Sequence Thread] Running capture event...
[02/27/19 21:40:21.119][DEBUG] [Sequence Thread] ------------- Starting capture frame for event[0] -------------
[02/27/19 21:40:21.131][DEBUG] [Sequence Thread] Sending commands...
[02/27/19 21:40:21.131][DEBUG] [Sequence Thread] SetFlatBox: Frame Type is Light
[02/27/19 21:40:21.131][DEBUG] [Sequence Thread] EventMarker 2 - t:m81 (1); e:0; f:40; o:
[02/27/19 21:40:21.131][DEBUG] [Sequence Thread] Checking if Meridian Flip is needed
[02/27/19 21:40:21.131][DEBUG] [Sequence Thread] Telescope is on the West side of the mount
[02/27/19 21:40:21.131][DEBUG] [Sequence Thread] Meridian Flip not needed, Hour Angle < Degrees Past To Flip: -31.2524898463227 < 0
[02/27/19 21:40:21.131][DEBUG] [Sequence Thread] EventMarker 3 - t:m81 (1); e:0; f:40; o:
[02/27/19 21:40:21.132][DEBUG] [Sequence Thread] EventMarker 4 - t:m81 (1); e:0; f:40; o:
[02/27/19 21:40:21.132][DEBUG] [Sequence Thread] Setting filter position 1...
[02/27/19 21:40:21.148][DEBUG] [Sequence Thread] Setting filter: Lum...
[02/27/19 21:40:21.148][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 1...
[02/27/19 21:40:21.148][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 1 is complete...
[02/27/19 21:40:21.350][DEBUG] [Sequence Thread] Adjust focuser pos per filter: Moving focsuer to focus position (64700)...
[02/27/19 21:40:21.350][DEBUG] [Sequence Thread] Adjust focuser pos per filter
[02/27/19 21:40:21.350][DEBUG] [Sequence Thread] Old filter: Green; Focus pos: 64679
[02/27/19 21:40:21.350][DEBUG] [Sequence Thread] New filter: Lum; Focus pos: 64700
[02/27/19 21:40:21.350][DEBUG] [Sequence Thread] Pos delta: 21 steps
[02/27/19 21:40:21.350][DEBUG] [Sequence Thread] New position-> (current: 4827) + (delta: 21) = 4848
[02/27/19 21:40:21.350][DEBUG] [Sequence Thread] Focuser moving to 4848
[02/27/19 21:40:22.147][DEBUG] [Sequence Thread] Focuser move call complete
[02/27/19 21:40:22.160][DEBUG] [Sequence Thread] Focuser position matches requested position (4848), continuing...
[02/27/19 21:40:22.160][DEBUG] [Sequence Thread] focuser move is complete...
[02/27/19 21:40:22.162][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 2...
[02/27/19 21:40:22.602][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:40:22.615][DEBUG] [MF Update Thread] Performing serialize...
[02/27/19 21:40:25.164][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 2 complete...
[02/27/19 21:40:25.172][DEBUG] [Sequence Thread] EventMarker 5 - t:m81 (1); e:0; f:40; o:
[02/27/19 21:40:25.173][DEBUG] [Sequence Thread] Checking for auto manual focus (pre)...
[02/27/19 21:40:25.173][DEBUG] [Sequence Thread] EventMarker 6 - t:m81 (1); e:0; f:40; o:
[02/27/19 21:40:25.181][DEBUG] [Sequence Thread] Autoguider will not dither this frame. Total frames is not a modulus of 5
[02/27/19 21:40:25.181][DEBUG] [Sequence Thread] EventMarker 1 - t:m81 (1); e:0; f:40; o:
[02/27/19 21:40:25.181][DEBUG] [Sequence Thread] Created base name for frame capture: m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_214025_frame41_-15C
[02/27/19 21:40:25.182][DEBUG] [Sequence Thread] Created directory for frame capture: C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\
[02/27/19 21:40:25.182][DEBUG] [Sequence Thread] EventMarker 7 - t:m81 (1); e:0; f:40; o:
[02/27/19 21:40:25.182][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:40:25.182][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:0; f:40; o:
[02/27/19 21:40:25.182][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:40:25.182][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:40:25.182][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:40:25.282][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:40:25.282][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:40:25.282][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:0; f:40; o:
[02/27/19 21:40:25.283][DEBUG] [Sequence Thread] {"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}
[02/27/19 21:40:25.283][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}

[02/27/19 21:40:25.283][DEBUG] [Sequence Thread] EventMarker 172 - t:m81 (1); e:0; f:40; o:
[02/27/19 21:40:25.283][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:40:25.283][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:40:25.283][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:40:25.349][DEBUG] [PHD2 Listener Thread] Unknown object from PHD2: {"Event":"SettleBegin","Timestamp":1551303625.299,"Host":"JGL2_2","Inst":1}
[02/27/19 21:40:25.383][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:40:25.383][DEBUG] [Sequence Thread] EventMarker 173 - t:m81 (1); e:0; f:40; o:
[02/27/19 21:40:25.384][DEBUG] [Sequence Thread] User has elected to skip guider settling over time...
[02/27/19 21:40:25.384][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Attempting to settle the auto guider...
[02/27/19 21:40:25.384][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Attempting to settle the auto guider...)...
[02/27/19 21:40:25.384][DEBUG] [Sequence Thread] Waiting for Auto Guider distance to fall below 0.5
[02/27/19 21:40:25.384][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:40:25.384][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:40:25.393][DEBUG] [Sequence Thread] Distance is below 0.5, starting timer...
[02/27/19 21:40:25.894][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:40:25.894][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:40:25.907][DEBUG] [Sequence Thread] Distance stayed below 0.5 for 0 seconds, done settling...
[02/27/19 21:40:25.908][DEBUG] [Sequence Thread] Auto guider has settled...
[02/27/19 21:40:25.909][DEBUG] [Sequence Thread] EventMarker 8 - t:m81 (1); e:0; f:40; o:
[02/27/19 21:40:25.909][DEBUG] [Sequence Thread] EventMarker 9 - t:m81 (1); e:0; f:40; o:
[02/27/19 21:40:25.909][DEBUG] [Sequence Thread] EventMarker 10 - t:m81 (1); e:0; f:40; o:
[02/27/19 21:40:25.909][DEBUG] [Sequence Thread] Finished sending frame capture.  Entering wait mode...
[02/27/19 21:40:25.909][DEBUG] [Sequence Thread] EventMarker 11 - t:m81 (1); e:0; f:40; o:
[02/27/19 21:40:25.909][DEBUG] [Sequence Thread] EventMarker 12 - t:m81 (1); e:0; f:40; o:
[02/27/19 21:40:25.918][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE message received...
[02/27/19 21:40:25.918][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Starting integration of m81; Event 1; Frame 41 for 30s...
[02/27/19 21:40:25.918][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Starting integration of m81; Event 1; Frame 41 for 30s...)...
[02/27/19 21:40:25.918][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, TimedError): (2019-02-25) Failure while integrating m81; Event 1; Frame 41 for 30s. Image has not downloaded in alloted time period.
[02/27/19 21:40:25.918][DEBUG] [Sequence Thread] GNS: Sent timed event to GNS...
[02/27/19 21:40:25.919][DEBUG] [Sequence Thread] EventMarker 13 - t:m81 (1); e:0; f:40; o:
[02/27/19 21:40:25.919][DEBUG] [Camera Thread] SetAscomGain to 76
[02/27/19 21:40:25.920][DEBUG] [Camera Thread] Camera gain set to 76
[02/27/19 21:40:25.920][DEBUG] [Camera Thread] SetAscomNormalSpeed... 
[02/27/19 21:40:25.920][DEBUG] [Camera Thread] Cannot set readout speed, not supported by camera...
[02/27/19 21:40:26.055][DEBUG] [PHD2 Listener Thread] PHD2: Settle done received: GOOD
[02/27/19 21:40:55.972][DEBUG] [Sequence Thread] EventMarker 15 - t:m81 (1); e:0; f:40; o:
[02/27/19 21:40:55.974][DEBUG] [Sequence Thread] Waking from exposure time sleep period...
[02/27/19 21:40:55.974][DEBUG] [Sequence Thread] Checking to see if the CCD has a temp...
[02/27/19 21:40:55.974][DEBUG] [Sequence Thread] Saving the CCD temp...
[02/27/19 21:40:55.979][DEBUG] [Sequence Thread] Entering super dangerous loop to await image completion...
[02/27/19 21:40:55.981][DEBUG] [Sequence Thread] EventMarker 16 - t:m81 (1); e:0; f:40; o:
[02/27/19 21:40:57.061][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE complete...
[02/27/19 21:40:57.588][DEBUG] [Sequence Thread] EventMarker 17 - t:m81 (1); e:0; f:40; o:
[02/27/19 21:40:57.588][DEBUG] [Sequence Thread] Image reported as complete.  Continuing...
[02/27/19 21:40:57.588][DEBUG] [Sequence Thread] Collecting FITs headers...
[02/27/19 21:40:57.588][DEBUG] [Sequence Thread] ASCOM Camera: Could not get last exposure start time.  Reported as (unknown)
[02/27/19 21:40:57.588][DEBUG] [Sequence Thread] DATE-LOC time provided by SGPro (failed to retrieve valid entry from camera)...
[02/27/19 21:40:57.589][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info for last solve...
[02/27/19 21:40:57.589][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info from UI...
[02/27/19 21:40:57.597][DEBUG] [Sequence Thread] Clearing timed monitoring events...
[02/27/19 21:40:57.601][DEBUG] [Sequence Thread] Created full file name (file does not exist): C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_214025_frame41_-15C.fit
[02/27/19 21:40:57.601][DEBUG] [Sequence Thread] SaveFileAscom: Start...
[02/27/19 21:40:57.601][DEBUG] [Sequence Thread] SaveFileAscom: Checking image data...
[02/27/19 21:40:57.601][DEBUG] [Sequence Thread] SaveFileAscom: Create normal preview bitmap...
[02/27/19 21:40:57.607][DEBUG] [Sequence Thread] SaveFileAscom: Locking preview bits...
[02/27/19 21:40:57.608][DEBUG] [Sequence Thread] SaveFileAscom: Validating file name...
[02/27/19 21:40:57.608][DEBUG] [Sequence Thread] SaveFileAscom: Starting byte traversal...
[02/27/19 21:40:57.787][DEBUG] [Sequence Thread] SaveFileAscom: Unlocking preview bits...
[02/27/19 21:40:57.787][DEBUG] [Sequence Thread] SaveFileAscom: Saving preview bitmap to disk...
[02/27/19 21:40:57.787][DEBUG] [Sequence Thread] SaveFileBmp16: Locking bitmap for disk write...
[02/27/19 21:40:57.787][DEBUG] [Sequence Thread] SaveFileBmp16: Opening file stream...
[02/27/19 21:40:57.796][DEBUG] [Sequence Thread] SaveFileBmp16: Writing FITS headers...
[02/27/19 21:40:57.797][DEBUG] [Sequence Thread] SaveFileBmp16: Traversing and persisting bitmap data...
[02/27/19 21:40:57.964][DEBUG] [Sequence Thread] SaveFileBmp16: FITS block fill...
[02/27/19 21:40:57.964][DEBUG] [Sequence Thread] SaveFileBmp16: Unlocking bitmap...
[02/27/19 21:40:57.964][DEBUG] [Sequence Thread] SaveFileBmp16: Closing file stream
[02/27/19 21:40:57.964][DEBUG] [Sequence Thread] SaveFileAscom: Displaying image preview in UI...
[02/27/19 21:40:57.964][DEBUG] [Sequence Thread] Internal Interface: Set Preview...
[02/27/19 21:40:57.964][DEBUG] [Sequence Thread] Display image preview using asynch task...
[02/27/19 21:40:58.824][DEBUG] [Sequence Thread] SaveFileAscom: Done
[02/27/19 21:40:58.824][DEBUG] [Sequence Thread] =========== Save file took 1226 ms
[02/27/19 21:40:58.824][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_214025_frame41_-15C.fit" saved.  HFR = 2.61.
[02/27/19 21:40:58.824][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_214025_frame41_-15C.fit" saved.  HFR = 2.61.)...
[02/27/19 21:40:58.833][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:40:58.833][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:0; f:40; o:
[02/27/19 21:40:58.833][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:40:58.833][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:40:58.833][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:40:58.934][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:40:58.934][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:40:58.934][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:0; f:40; o:
[02/27/19 21:40:58.934][DEBUG] [Sequence Thread] EventMarker 18 - t:m81 (1); e:0; f:40; o:
[02/27/19 21:40:58.940][DEBUG] [Sequence Thread] EventMarker 19 - t:m81 (1); e:0; f:41; o:
[02/27/19 21:40:58.940][DEBUG] [Sequence Thread] EventMarker 20 - t:m81 (1); e:0; f:41; o:
[02/27/19 21:40:58.940][DEBUG] [Sequence Thread] Running post event...
[02/27/19 21:40:58.940][DEBUG] [Sequence Thread] EventMarker 21 - t:m81 (1); e:0; f:41; o:
[02/27/19 21:40:58.943][DEBUG] [Sequence Thread] Incremented numComplete (41) for event[0]...
[02/27/19 21:40:58.952][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:40:58.952][DEBUG] [Sequence Thread] Current event[0] frame count: 41/120...
[02/27/19 21:40:58.952][DEBUG] [Sequence Thread] Looking at event[1]...
[02/27/19 21:40:58.952][DEBUG] [Sequence Thread] Found event event[1] with remaining frames.
[02/27/19 21:40:58.952][DEBUG] [Sequence Thread] Event[1] frame count: 9/120...
[02/27/19 21:40:58.952][DEBUG] [Sequence Thread] Getting next event (1)...
[02/27/19 21:40:58.952][DEBUG] [Sequence Thread] Checking for auto manual focus (post)...
[02/27/19 21:40:58.952][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:40:58.964][DEBUG] [Sequence Thread] Attempting to move to next event...
[02/27/19 21:40:58.964][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:40:58.964][DEBUG] [Sequence Thread] Current event[0] frame count: 41/120...
[02/27/19 21:40:58.964][DEBUG] [Sequence Thread] Looking at event[1]...
[02/27/19 21:40:58.964][DEBUG] [Sequence Thread] Found event event[1] with remaining frames.
[02/27/19 21:40:58.964][DEBUG] [Sequence Thread] Event[1] frame count: 9/120...
[02/27/19 21:40:58.964][DEBUG] [Sequence Thread] Getting next event (1)...
[02/27/19 21:40:58.964][DEBUG] [Sequence Thread] Running pre event...
[02/27/19 21:40:58.979][DEBUG] [Sequence Thread] Current target has end time at 28/02/2019 06:30:00
[02/27/19 21:40:58.979][DEBUG] [Sequence Thread] End time of next frame is at 27/02/2019 21:41:28
[02/27/19 21:40:58.979][DEBUG] [Sequence Thread] Target is still before end time, continuing...
[02/27/19 21:40:58.979][DEBUG] [Sequence Thread] Running capture event...
[02/27/19 21:40:58.983][DEBUG] [Sequence Thread] ------------- Starting capture frame for event[1] -------------
[02/27/19 21:40:58.999][DEBUG] [Sequence Thread] Sending commands...
[02/27/19 21:40:58.999][DEBUG] [Sequence Thread] SetFlatBox: Frame Type is Light
[02/27/19 21:40:58.999][DEBUG] [Sequence Thread] EventMarker 2 - t:m81 (1); e:1; f:9; o:
[02/27/19 21:40:58.999][DEBUG] [Sequence Thread] Checking if Meridian Flip is needed
[02/27/19 21:40:58.999][DEBUG] [Sequence Thread] Telescope is on the West side of the mount
[02/27/19 21:40:58.999][DEBUG] [Sequence Thread] Meridian Flip not needed, Hour Angle < Degrees Past To Flip: -31.0900864738846 < 0
[02/27/19 21:40:58.999][DEBUG] [Sequence Thread] EventMarker 3 - t:m81 (1); e:1; f:9; o:
[02/27/19 21:40:58.999][DEBUG] [Sequence Thread] EventMarker 4 - t:m81 (1); e:1; f:9; o:
[02/27/19 21:40:58.999][DEBUG] [Sequence Thread] Setting filter position 1...
[02/27/19 21:40:58.999][DEBUG] [Sequence Thread] Filter position 1 is already set.  Skipping...
[02/27/19 21:40:58.999][DEBUG] [Sequence Thread] EventMarker 5 - t:m81 (1); e:1; f:9; o:
[02/27/19 21:40:58.999][DEBUG] [Sequence Thread] Checking for auto manual focus (pre)...
[02/27/19 21:40:58.999][DEBUG] [Sequence Thread] EventMarker 6 - t:m81 (1); e:1; f:9; o:
[02/27/19 21:40:59.008][DEBUG] [Sequence Thread] Running dither...
[02/27/19 21:40:59.018][DEBUG] [Sequence Thread] PHD2 dither request: 1...
[02/27/19 21:40:59.018][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:40:59.018][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:40:59.018][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:40:59.119][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:41:00.120][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:41:00.120][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:41:00.120][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:41:00.220][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:41:01.221][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:41:01.221][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:41:01.221][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:41:01.322][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:41:02.322][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:41:02.322][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:41:02.322][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:41:02.423][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:41:03.423][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:41:03.423][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:41:03.423][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:41:03.524][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:41:03.524][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:41:03.524][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:41:03.524][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:41:03.625][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:41:03.625][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "dither", "params": [1, false, {"pixels": 0.5, "time": 0, "timeout": 600}], "id": 1002}

[02/27/19 21:41:03.626][DEBUG] [Sequence Thread] EventMarker 1 - t:m81 (1); e:1; f:9; o:
[02/27/19 21:41:03.627][DEBUG] [Sequence Thread] Created base name for frame capture: m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_214103_frame10_-15C
[02/27/19 21:41:03.627][DEBUG] [Sequence Thread] Created directory for frame capture: C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\
[02/27/19 21:41:03.627][DEBUG] [Sequence Thread] EventMarker 7 - t:m81 (1); e:1; f:9; o:
[02/27/19 21:41:03.627][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:41:03.627][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:1; f:9; o:
[02/27/19 21:41:03.627][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:41:03.627][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:41:03.627][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:41:03.717][DEBUG] [PHD2 Listener Thread] Unknown object from PHD2: {"Event":"SettleBegin","Timestamp":1551303663.672,"Host":"JGL2_2","Inst":1}
[02/27/19 21:41:03.728][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:41:03.728][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:41:03.728][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:1; f:9; o:
[02/27/19 21:41:03.728][DEBUG] [Sequence Thread] {"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}
[02/27/19 21:41:03.728][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}

[02/27/19 21:41:03.728][DEBUG] [Sequence Thread] EventMarker 172 - t:m81 (1); e:1; f:9; o:
[02/27/19 21:41:03.728][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:41:03.728][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:41:03.728][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:41:03.819][DEBUG] [PHD2 Listener Thread] Error received from RPC: Cannot initiate guide while dither is in progress
[02/27/19 21:41:03.829][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:41:03.829][DEBUG] [Sequence Thread] EventMarker 173 - t:m81 (1); e:1; f:9; o:
[02/27/19 21:41:03.829][DEBUG] [Sequence Thread] User has elected to skip guider settling over time...
[02/27/19 21:41:03.829][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Attempting to settle the auto guider...
[02/27/19 21:41:03.829][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Attempting to settle the auto guider...)...
[02/27/19 21:41:03.829][DEBUG] [Sequence Thread] Waiting for Auto Guider distance to fall below 0.5
[02/27/19 21:41:03.829][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:41:03.829][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:41:03.841][DEBUG] [Sequence Thread] Distance is below 0.5, starting timer...
[02/27/19 21:41:04.021][DEBUG] [PHD2 Listener Thread] PHD2: Settle done received: GOOD
[02/27/19 21:41:04.342][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:41:04.342][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:41:04.349][DEBUG] [Sequence Thread] Distance stayed below 0.5 for 0 seconds, done settling...
[02/27/19 21:41:04.349][DEBUG] [Sequence Thread] Auto guider has settled...
[02/27/19 21:41:04.350][DEBUG] [Sequence Thread] EventMarker 8 - t:m81 (1); e:1; f:9; o:
[02/27/19 21:41:04.350][DEBUG] [Sequence Thread] EventMarker 9 - t:m81 (1); e:1; f:9; o:
[02/27/19 21:41:04.350][DEBUG] [Sequence Thread] EventMarker 10 - t:m81 (1); e:1; f:9; o:
[02/27/19 21:41:04.350][DEBUG] [Sequence Thread] Finished sending frame capture.  Entering wait mode...
[02/27/19 21:41:04.350][DEBUG] [Sequence Thread] EventMarker 11 - t:m81 (1); e:1; f:9; o:
[02/27/19 21:41:04.350][DEBUG] [Sequence Thread] EventMarker 12 - t:m81 (1); e:1; f:9; o:
[02/27/19 21:41:04.351][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE message received...
[02/27/19 21:41:04.352][DEBUG] [Camera Thread] SetAscomGain to 76
[02/27/19 21:41:04.353][DEBUG] [Camera Thread] Camera gain set to 76
[02/27/19 21:41:04.353][DEBUG] [Camera Thread] SetAscomNormalSpeed... 
[02/27/19 21:41:04.353][DEBUG] [Camera Thread] Cannot set readout speed, not supported by camera...
[02/27/19 21:41:04.356][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Starting integration of m81; Event 2; Frame 10 for 30s...
[02/27/19 21:41:04.356][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Starting integration of m81; Event 2; Frame 10 for 30s...)...
[02/27/19 21:41:04.356][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, TimedError): (2019-02-25) Failure while integrating m81; Event 2; Frame 10 for 30s. Image has not downloaded in alloted time period.
[02/27/19 21:41:04.356][DEBUG] [Sequence Thread] GNS: Sent timed event to GNS...
[02/27/19 21:41:04.358][DEBUG] [Sequence Thread] EventMarker 13 - t:m81 (1); e:1; f:9; o:
[02/27/19 21:41:34.483][DEBUG] [Sequence Thread] EventMarker 15 - t:m81 (1); e:1; f:9; o:
[02/27/19 21:41:34.486][DEBUG] [Sequence Thread] Waking from exposure time sleep period...
[02/27/19 21:41:34.486][DEBUG] [Sequence Thread] Checking to see if the CCD has a temp...
[02/27/19 21:41:34.486][DEBUG] [Sequence Thread] Saving the CCD temp...
[02/27/19 21:41:34.492][DEBUG] [Sequence Thread] Entering super dangerous loop to await image completion...
[02/27/19 21:41:34.494][DEBUG] [Sequence Thread] EventMarker 16 - t:m81 (1); e:1; f:9; o:
[02/27/19 21:41:35.530][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE complete...
[02/27/19 21:41:36.004][DEBUG] [Sequence Thread] EventMarker 17 - t:m81 (1); e:1; f:9; o:
[02/27/19 21:41:36.004][DEBUG] [Sequence Thread] Image reported as complete.  Continuing...
[02/27/19 21:41:36.005][DEBUG] [Sequence Thread] Collecting FITs headers...
[02/27/19 21:41:36.005][DEBUG] [Sequence Thread] ASCOM Camera: Could not get last exposure start time.  Reported as (unknown)
[02/27/19 21:41:36.005][DEBUG] [Sequence Thread] DATE-LOC time provided by SGPro (failed to retrieve valid entry from camera)...
[02/27/19 21:41:36.006][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info for last solve...
[02/27/19 21:41:36.006][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info from UI...
[02/27/19 21:41:36.008][DEBUG] [Sequence Thread] Clearing timed monitoring events...
[02/27/19 21:41:36.012][DEBUG] [Sequence Thread] Created full file name (file does not exist): C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_214103_frame10_-15C.fit
[02/27/19 21:41:36.012][DEBUG] [Sequence Thread] SaveFileAscom: Start...
[02/27/19 21:41:36.012][DEBUG] [Sequence Thread] SaveFileAscom: Checking image data...
[02/27/19 21:41:36.012][DEBUG] [Sequence Thread] SaveFileAscom: Create normal preview bitmap...
[02/27/19 21:41:36.018][DEBUG] [Sequence Thread] SaveFileAscom: Locking preview bits...
[02/27/19 21:41:36.018][DEBUG] [Sequence Thread] SaveFileAscom: Validating file name...
[02/27/19 21:41:36.018][DEBUG] [Sequence Thread] SaveFileAscom: Starting byte traversal...
[02/27/19 21:41:36.198][DEBUG] [Sequence Thread] SaveFileAscom: Unlocking preview bits...
[02/27/19 21:41:36.198][DEBUG] [Sequence Thread] SaveFileAscom: Saving preview bitmap to disk...
[02/27/19 21:41:36.198][DEBUG] [Sequence Thread] SaveFileBmp16: Locking bitmap for disk write...
[02/27/19 21:41:36.198][DEBUG] [Sequence Thread] SaveFileBmp16: Opening file stream...
[02/27/19 21:41:36.199][DEBUG] [Sequence Thread] SaveFileBmp16: Writing FITS headers...
[02/27/19 21:41:36.199][DEBUG] [Sequence Thread] SaveFileBmp16: Traversing and persisting bitmap data...
[02/27/19 21:41:36.365][DEBUG] [Sequence Thread] SaveFileBmp16: FITS block fill...
[02/27/19 21:41:36.365][DEBUG] [Sequence Thread] SaveFileBmp16: Unlocking bitmap...
[02/27/19 21:41:36.365][DEBUG] [Sequence Thread] SaveFileBmp16: Closing file stream
[02/27/19 21:41:36.369][DEBUG] [Sequence Thread] SaveFileAscom: Displaying image preview in UI...
[02/27/19 21:41:36.369][DEBUG] [Sequence Thread] Internal Interface: Set Preview...
[02/27/19 21:41:36.369][DEBUG] [Sequence Thread] Display image preview using asynch task...
[02/27/19 21:41:37.315][DEBUG] [Sequence Thread] SaveFileAscom: Done
[02/27/19 21:41:37.315][DEBUG] [Sequence Thread] =========== Save file took 1307 ms
[02/27/19 21:41:37.315][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_214103_frame10_-15C.fit" saved.  HFR = 2.61.
[02/27/19 21:41:37.315][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_214103_frame10_-15C.fit" saved.  HFR = 2.61.)...
[02/27/19 21:41:37.319][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:41:37.319][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:1; f:9; o:
[02/27/19 21:41:37.319][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:41:37.319][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:41:37.319][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:41:37.420][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:41:37.420][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:41:37.420][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:1; f:9; o:
[02/27/19 21:41:37.420][DEBUG] [Sequence Thread] EventMarker 18 - t:m81 (1); e:1; f:9; o:
[02/27/19 21:41:37.428][DEBUG] [Sequence Thread] EventMarker 19 - t:m81 (1); e:1; f:10; o:
[02/27/19 21:41:37.428][DEBUG] [Sequence Thread] EventMarker 20 - t:m81 (1); e:1; f:10; o:
[02/27/19 21:41:37.428][DEBUG] [Sequence Thread] Running post event...
[02/27/19 21:41:37.428][DEBUG] [Sequence Thread] EventMarker 21 - t:m81 (1); e:1; f:10; o:
[02/27/19 21:41:37.430][DEBUG] [Sequence Thread] Incremented numComplete (10) for event[1]...
[02/27/19 21:41:37.436][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:41:37.436][DEBUG] [Sequence Thread] Current event[1] frame count: 10/120...
[02/27/19 21:41:37.436][DEBUG] [Sequence Thread] Looking at event[2]...
[02/27/19 21:41:37.436][DEBUG] [Sequence Thread] Found event event[2] with remaining frames.
[02/27/19 21:41:37.436][DEBUG] [Sequence Thread] Event[2] frame count: 10/60...
[02/27/19 21:41:37.436][DEBUG] [Sequence Thread] Getting next event (2)...
[02/27/19 21:41:37.436][DEBUG] [Sequence Thread] Checking for auto manual focus (post)...
[02/27/19 21:41:37.436][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:41:37.451][DEBUG] [Sequence Thread] Attempting to move to next event...
[02/27/19 21:41:37.451][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:41:37.451][DEBUG] [Sequence Thread] Current event[1] frame count: 10/120...
[02/27/19 21:41:37.451][DEBUG] [Sequence Thread] Looking at event[2]...
[02/27/19 21:41:37.451][DEBUG] [Sequence Thread] Found event event[2] with remaining frames.
[02/27/19 21:41:37.451][DEBUG] [Sequence Thread] Event[2] frame count: 10/60...
[02/27/19 21:41:37.451][DEBUG] [Sequence Thread] Getting next event (2)...
[02/27/19 21:41:37.451][DEBUG] [Sequence Thread] Running pre event...
[02/27/19 21:41:37.470][DEBUG] [Sequence Thread] Current target has end time at 28/02/2019 06:30:00
[02/27/19 21:41:37.470][DEBUG] [Sequence Thread] End time of next frame is at 27/02/2019 21:43:07
[02/27/19 21:41:37.470][DEBUG] [Sequence Thread] Target is still before end time, continuing...
[02/27/19 21:41:37.470][DEBUG] [Sequence Thread] Running capture event...
[02/27/19 21:41:37.472][DEBUG] [Sequence Thread] ------------- Starting capture frame for event[2] -------------
[02/27/19 21:41:37.492][DEBUG] [Sequence Thread] Sending commands...
[02/27/19 21:41:37.492][DEBUG] [Sequence Thread] SetFlatBox: Frame Type is Light
[02/27/19 21:41:37.492][DEBUG] [Sequence Thread] EventMarker 2 - t:m81 (1); e:2; f:10; o:
[02/27/19 21:41:37.492][DEBUG] [Sequence Thread] Checking if Meridian Flip is needed
[02/27/19 21:41:37.492][DEBUG] [Sequence Thread] Telescope is on the West side of the mount
[02/27/19 21:41:37.492][DEBUG] [Sequence Thread] Meridian Flip not needed, Hour Angle < Degrees Past To Flip: -30.9322363213872 < 0
[02/27/19 21:41:37.492][DEBUG] [Sequence Thread] EventMarker 3 - t:m81 (1); e:2; f:10; o:
[02/27/19 21:41:37.492][DEBUG] [Sequence Thread] EventMarker 4 - t:m81 (1); e:2; f:10; o:
[02/27/19 21:41:37.492][DEBUG] [Sequence Thread] Setting filter position 4...
[02/27/19 21:41:37.499][DEBUG] [Sequence Thread] Setting filter: Blue...
[02/27/19 21:41:37.499][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 1...
[02/27/19 21:41:37.499][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 1 is complete...
[02/27/19 21:41:37.701][DEBUG] [Sequence Thread] Adjust focuser pos per filter: Moving focsuer to focus position (64704)...
[02/27/19 21:41:37.701][DEBUG] [Sequence Thread] Adjust focuser pos per filter
[02/27/19 21:41:37.701][DEBUG] [Sequence Thread] Old filter: Lum; Focus pos: 64700
[02/27/19 21:41:37.701][DEBUG] [Sequence Thread] New filter: Blue; Focus pos: 64704
[02/27/19 21:41:37.701][DEBUG] [Sequence Thread] Pos delta: 4 steps
[02/27/19 21:41:37.701][DEBUG] [Sequence Thread] New position-> (current: 4848) + (delta: 4) = 4852
[02/27/19 21:41:37.701][DEBUG] [Sequence Thread] Focuser moving to 4852
[02/27/19 21:41:38.363][DEBUG] [Sequence Thread] Focuser move call complete
[02/27/19 21:41:38.376][DEBUG] [Sequence Thread] Focuser position matches requested position (4852), continuing...
[02/27/19 21:41:38.376][DEBUG] [Sequence Thread] focuser move is complete...
[02/27/19 21:41:38.377][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 2...
[02/27/19 21:41:41.380][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 2 complete...
[02/27/19 21:41:41.388][DEBUG] [Sequence Thread] EventMarker 5 - t:m81 (1); e:2; f:10; o:
[02/27/19 21:41:41.388][DEBUG] [Sequence Thread] Checking for auto manual focus (pre)...
[02/27/19 21:41:41.388][DEBUG] [Sequence Thread] EventMarker 6 - t:m81 (1); e:2; f:10; o:
[02/27/19 21:41:41.396][DEBUG] [Sequence Thread] Autoguider will not dither this frame. Total frames is not a modulus of 5
[02/27/19 21:41:41.396][DEBUG] [Sequence Thread] EventMarker 1 - t:m81 (1); e:2; f:10; o:
[02/27/19 21:41:41.397][DEBUG] [Sequence Thread] Created base name for frame capture: m81_Light_90sec_1x1__Blue_gain_76_2019-02-27_214141_frame11_-15C
[02/27/19 21:41:41.397][DEBUG] [Sequence Thread] Created directory for frame capture: C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\
[02/27/19 21:41:41.397][DEBUG] [Sequence Thread] EventMarker 7 - t:m81 (1); e:2; f:10; o:
[02/27/19 21:41:41.397][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:41:41.397][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:2; f:10; o:
[02/27/19 21:41:41.397][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:41:41.397][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:41:41.397][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:41:41.497][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:41:41.497][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:41:41.497][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:2; f:10; o:
[02/27/19 21:41:41.498][DEBUG] [Sequence Thread] {"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}
[02/27/19 21:41:41.498][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}

[02/27/19 21:41:41.498][DEBUG] [Sequence Thread] EventMarker 172 - t:m81 (1); e:2; f:10; o:
[02/27/19 21:41:41.498][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:41:41.498][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:41:41.498][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:41:41.578][DEBUG] [PHD2 Listener Thread] Unknown object from PHD2: {"Event":"SettleBegin","Timestamp":1551303701.528,"Host":"JGL2_2","Inst":1}
[02/27/19 21:41:41.599][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:41:41.599][DEBUG] [Sequence Thread] EventMarker 173 - t:m81 (1); e:2; f:10; o:
[02/27/19 21:41:41.600][DEBUG] [Sequence Thread] User has elected to skip guider settling over time...
[02/27/19 21:41:41.600][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Attempting to settle the auto guider...
[02/27/19 21:41:41.600][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Attempting to settle the auto guider...)...
[02/27/19 21:41:41.600][DEBUG] [Sequence Thread] Waiting for Auto Guider distance to fall below 0.5
[02/27/19 21:41:41.600][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:41:41.600][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:41:41.607][DEBUG] [Sequence Thread] Distance is below 0.5, starting timer...
[02/27/19 21:41:42.031][DEBUG] [PHD2 Listener Thread] PHD2: Settle done received: GOOD
[02/27/19 21:41:42.108][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:41:42.108][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:41:42.326][DEBUG] [Sequence Thread] Distance stayed below 0.5 for 0 seconds, done settling...
[02/27/19 21:41:42.339][DEBUG] [Sequence Thread] Auto guider has settled...
[02/27/19 21:41:42.339][DEBUG] [Sequence Thread] EventMarker 8 - t:m81 (1); e:2; f:10; o:
[02/27/19 21:41:42.339][DEBUG] [Sequence Thread] EventMarker 9 - t:m81 (1); e:2; f:10; o:
[02/27/19 21:41:42.339][DEBUG] [Sequence Thread] EventMarker 10 - t:m81 (1); e:2; f:10; o:
[02/27/19 21:41:42.339][DEBUG] [Sequence Thread] Finished sending frame capture.  Entering wait mode...
[02/27/19 21:41:42.339][DEBUG] [Sequence Thread] EventMarker 11 - t:m81 (1); e:2; f:10; o:
[02/27/19 21:41:42.341][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE message received...
[02/27/19 21:41:42.341][DEBUG] [Sequence Thread] EventMarker 12 - t:m81 (1); e:2; f:10; o:
[02/27/19 21:41:42.343][DEBUG] [Camera Thread] SetAscomGain to 76
[02/27/19 21:41:42.344][DEBUG] [Camera Thread] Camera gain set to 76
[02/27/19 21:41:42.344][DEBUG] [Camera Thread] SetAscomNormalSpeed... 
[02/27/19 21:41:42.344][DEBUG] [Camera Thread] Cannot set readout speed, not supported by camera...
[02/27/19 21:41:42.353][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Starting integration of m81; Event 3; Frame 11 for 90s...
[02/27/19 21:41:42.353][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Starting integration of m81; Event 3; Frame 11 for 90s...)...
[02/27/19 21:41:42.353][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, TimedError): (2019-02-25) Failure while integrating m81; Event 3; Frame 11 for 90s. Image has not downloaded in alloted time period.
[02/27/19 21:41:42.353][DEBUG] [Sequence Thread] GNS: Sent timed event to GNS...
[02/27/19 21:41:42.356][DEBUG] [Sequence Thread] EventMarker 13 - t:m81 (1); e:2; f:10; o:
[02/27/19 21:41:46.879][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:41:46.894][DEBUG] [MF Update Thread] Performing serialize...
[02/27/19 21:43:12.404][DEBUG] [Sequence Thread] EventMarker 15 - t:m81 (1); e:2; f:10; o:
[02/27/19 21:43:12.407][DEBUG] [Sequence Thread] Waking from exposure time sleep period...
[02/27/19 21:43:12.407][DEBUG] [Sequence Thread] Checking to see if the CCD has a temp...
[02/27/19 21:43:12.407][DEBUG] [Sequence Thread] Saving the CCD temp...
[02/27/19 21:43:12.413][DEBUG] [Sequence Thread] Entering super dangerous loop to await image completion...
[02/27/19 21:43:12.415][DEBUG] [Sequence Thread] EventMarker 16 - t:m81 (1); e:2; f:10; o:
[02/27/19 21:43:13.590][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE complete...
[02/27/19 21:43:13.921][DEBUG] [Sequence Thread] EventMarker 17 - t:m81 (1); e:2; f:10; o:
[02/27/19 21:43:13.921][DEBUG] [Sequence Thread] Image reported as complete.  Continuing...
[02/27/19 21:43:13.921][DEBUG] [Sequence Thread] Collecting FITs headers...
[02/27/19 21:43:13.921][DEBUG] [Sequence Thread] ASCOM Camera: Could not get last exposure start time.  Reported as (unknown)
[02/27/19 21:43:13.921][DEBUG] [Sequence Thread] DATE-LOC time provided by SGPro (failed to retrieve valid entry from camera)...
[02/27/19 21:43:13.922][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info for last solve...
[02/27/19 21:43:13.922][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info from UI...
[02/27/19 21:43:13.923][DEBUG] [Sequence Thread] Clearing timed monitoring events...
[02/27/19 21:43:13.926][DEBUG] [Sequence Thread] Created full file name (file does not exist): C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\m81_Light_90sec_1x1__Blue_gain_76_2019-02-27_214141_frame11_-15C.fit
[02/27/19 21:43:13.926][DEBUG] [Sequence Thread] SaveFileAscom: Start...
[02/27/19 21:43:13.926][DEBUG] [Sequence Thread] SaveFileAscom: Checking image data...
[02/27/19 21:43:13.926][DEBUG] [Sequence Thread] SaveFileAscom: Create normal preview bitmap...
[02/27/19 21:43:13.932][DEBUG] [Sequence Thread] SaveFileAscom: Locking preview bits...
[02/27/19 21:43:13.932][DEBUG] [Sequence Thread] SaveFileAscom: Validating file name...
[02/27/19 21:43:13.932][DEBUG] [Sequence Thread] SaveFileAscom: Starting byte traversal...
[02/27/19 21:43:14.100][DEBUG] [Sequence Thread] SaveFileAscom: Unlocking preview bits...
[02/27/19 21:43:14.100][DEBUG] [Sequence Thread] SaveFileAscom: Saving preview bitmap to disk...
[02/27/19 21:43:14.100][DEBUG] [Sequence Thread] SaveFileBmp16: Locking bitmap for disk write...
[02/27/19 21:43:14.100][DEBUG] [Sequence Thread] SaveFileBmp16: Opening file stream...
[02/27/19 21:43:14.101][DEBUG] [Sequence Thread] SaveFileBmp16: Writing FITS headers...
[02/27/19 21:43:14.101][DEBUG] [Sequence Thread] SaveFileBmp16: Traversing and persisting bitmap data...
[02/27/19 21:43:14.269][DEBUG] [Sequence Thread] SaveFileBmp16: FITS block fill...
[02/27/19 21:43:14.270][DEBUG] [Sequence Thread] SaveFileBmp16: Unlocking bitmap...
[02/27/19 21:43:14.270][DEBUG] [Sequence Thread] SaveFileBmp16: Closing file stream
[02/27/19 21:43:14.270][DEBUG] [Sequence Thread] SaveFileAscom: Displaying image preview in UI...
[02/27/19 21:43:14.270][DEBUG] [Sequence Thread] Internal Interface: Set Preview...
[02/27/19 21:43:14.270][DEBUG] [Sequence Thread] Display image preview using asynch task...
[02/27/19 21:43:15.051][DEBUG] [Sequence Thread] SaveFileAscom: Done
[02/27/19 21:43:15.052][DEBUG] [Sequence Thread] =========== Save file took 1129 ms
[02/27/19 21:43:15.052][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Image "m81_Light_90sec_1x1__Blue_gain_76_2019-02-27_214141_frame11_-15C.fit" saved.  HFR = 2.61.
[02/27/19 21:43:15.052][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Image "m81_Light_90sec_1x1__Blue_gain_76_2019-02-27_214141_frame11_-15C.fit" saved.  HFR = 2.61.)...
[02/27/19 21:43:15.055][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:43:15.055][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:2; f:10; o:
[02/27/19 21:43:15.055][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:43:15.055][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:43:15.055][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:43:15.156][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:43:15.156][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:43:15.156][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:2; f:10; o:
[02/27/19 21:43:15.156][DEBUG] [Sequence Thread] EventMarker 18 - t:m81 (1); e:2; f:10; o:
[02/27/19 21:43:15.169][DEBUG] [Sequence Thread] EventMarker 19 - t:m81 (1); e:2; f:11; o:
[02/27/19 21:43:15.169][DEBUG] [Sequence Thread] EventMarker 20 - t:m81 (1); e:2; f:11; o:
[02/27/19 21:43:15.169][DEBUG] [Sequence Thread] Running post event...
[02/27/19 21:43:15.169][DEBUG] [Sequence Thread] EventMarker 21 - t:m81 (1); e:2; f:11; o:
[02/27/19 21:43:15.173][DEBUG] [Sequence Thread] Incremented numComplete (11) for event[2]...
[02/27/19 21:43:15.175][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:43:15.175][DEBUG] [Sequence Thread] Current event[2] frame count: 11/60...
[02/27/19 21:43:15.175][DEBUG] [Sequence Thread] Looking at event[3]...
[02/27/19 21:43:15.175][DEBUG] [Sequence Thread] Found event event[3] with remaining frames.
[02/27/19 21:43:15.175][DEBUG] [Sequence Thread] Event[3] frame count: 10/60...
[02/27/19 21:43:15.175][DEBUG] [Sequence Thread] Getting next event (3)...
[02/27/19 21:43:15.175][DEBUG] [Sequence Thread] Checking for auto manual focus (post)...
[02/27/19 21:43:15.176][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:43:15.191][DEBUG] [Sequence Thread] Attempting to move to next event...
[02/27/19 21:43:15.191][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:43:15.191][DEBUG] [Sequence Thread] Current event[2] frame count: 11/60...
[02/27/19 21:43:15.191][DEBUG] [Sequence Thread] Looking at event[3]...
[02/27/19 21:43:15.191][DEBUG] [Sequence Thread] Found event event[3] with remaining frames.
[02/27/19 21:43:15.191][DEBUG] [Sequence Thread] Event[3] frame count: 10/60...
[02/27/19 21:43:15.191][DEBUG] [Sequence Thread] Getting next event (3)...
[02/27/19 21:43:15.191][DEBUG] [Sequence Thread] Running pre event...
[02/27/19 21:43:15.205][DEBUG] [Sequence Thread] Current target has end time at 28/02/2019 06:30:00
[02/27/19 21:43:15.205][DEBUG] [Sequence Thread] End time of next frame is at 27/02/2019 21:44:45
[02/27/19 21:43:15.205][DEBUG] [Sequence Thread] Target is still before end time, continuing...
[02/27/19 21:43:15.205][DEBUG] [Sequence Thread] Running capture event...
[02/27/19 21:43:15.207][DEBUG] [Sequence Thread] ------------- Starting capture frame for event[3] -------------
[02/27/19 21:43:15.212][DEBUG] [Sequence Thread] Sending commands...
[02/27/19 21:43:15.212][DEBUG] [Sequence Thread] SetFlatBox: Frame Type is Light
[02/27/19 21:43:15.212][DEBUG] [Sequence Thread] EventMarker 2 - t:m81 (1); e:3; f:10; o:
[02/27/19 21:43:15.212][DEBUG] [Sequence Thread] Checking if Meridian Flip is needed
[02/27/19 21:43:15.212][DEBUG] [Sequence Thread] Telescope is on the West side of the mount
[02/27/19 21:43:15.212][DEBUG] [Sequence Thread] Meridian Flip not needed, Hour Angle < Degrees Past To Flip: -30.5243266989513 < 0
[02/27/19 21:43:15.212][DEBUG] [Sequence Thread] EventMarker 3 - t:m81 (1); e:3; f:10; o:
[02/27/19 21:43:15.212][DEBUG] [Sequence Thread] EventMarker 4 - t:m81 (1); e:3; f:10; o:
[02/27/19 21:43:15.212][DEBUG] [Sequence Thread] Setting filter position 2...
[02/27/19 21:43:15.217][DEBUG] [Sequence Thread] Setting filter: Red...
[02/27/19 21:43:15.217][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 1...
[02/27/19 21:43:15.217][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 1 is complete...
[02/27/19 21:43:15.419][DEBUG] [Sequence Thread] Adjust focuser pos per filter: Moving focsuer to focus position (64697)...
[02/27/19 21:43:15.419][DEBUG] [Sequence Thread] Adjust focuser pos per filter
[02/27/19 21:43:15.419][DEBUG] [Sequence Thread] Old filter: Blue; Focus pos: 64704
[02/27/19 21:43:15.419][DEBUG] [Sequence Thread] New filter: Red; Focus pos: 64697
[02/27/19 21:43:15.419][DEBUG] [Sequence Thread] Pos delta: -7 steps
[02/27/19 21:43:15.419][DEBUG] [Sequence Thread] New position-> (current: 4852) + (delta: -7) = 4845
[02/27/19 21:43:15.419][DEBUG] [Sequence Thread] Focuser moving to 4845
[02/27/19 21:43:16.064][DEBUG] [Sequence Thread] Focuser move call complete
[02/27/19 21:43:16.072][DEBUG] [Sequence Thread] Focuser position matches requested position (4845), continuing...
[02/27/19 21:43:16.072][DEBUG] [Sequence Thread] focuser move is complete...
[02/27/19 21:43:16.074][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 2...
[02/27/19 21:43:19.076][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 2 complete...
[02/27/19 21:43:19.090][DEBUG] [Sequence Thread] EventMarker 5 - t:m81 (1); e:3; f:10; o:
[02/27/19 21:43:19.090][DEBUG] [Sequence Thread] Checking for auto manual focus (pre)...
[02/27/19 21:43:19.090][DEBUG] [Sequence Thread] Auto Manual focus required (time trigger)...
[02/27/19 21:43:19.096][DEBUG] [Sequence Thread] Auto pause for manual focus...
[02/27/19 21:43:19.102][DEBUG] [Sequence Thread] EventMarker 6 - t:m81 (1); e:3; f:10; o:* aborted *
[02/27/19 21:43:19.102][DEBUG] [Sequence Thread] EventMarker 10 - t:m81 (1); e:3; f:10; o:* aborted *
[02/27/19 21:43:19.108][DEBUG] [Sequence Thread] Run event requested sequence abort...
[02/27/19 21:43:19.108][DEBUG] [Sequence Thread] ********* Run post sequence *********
[02/27/19 21:43:19.108][DEBUG] [Sequence Thread] SGPro capture cal frame mode is OFF...
[02/27/19 21:43:19.108][DEBUG] [Sequence Thread] Clearing timed monitoring events...
[02/27/19 21:43:19.108][DEBUG] [Sequence Thread] Checking RunEndOfSequenceEquipmentOptions, force = False
[02/27/19 21:43:19.108][DEBUG] [Sequence Thread] Sequence was aborted, skipping end of sequence options...
[02/27/19 21:43:19.114][DEBUG] [Main Thread] Aborting sequence timer thread...
[02/27/19 21:43:19.114][DEBUG] [Main Thread] Sending sequence end notification...
[02/27/19 21:43:19.114][DEBUG] [Main Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Sequence has ended
[02/27/19 21:43:19.114][DEBUG] [Main Thread] GNS: Sent status message to GNS ((2019-02-25) Sequence has ended)...
[02/27/19 21:43:19.114][DEBUG] [Main Thread] Resetting UI elements...
[02/27/19 21:43:19.115][DEBUG] [Main Thread] Checking if sequence has work left...
[02/27/19 21:43:19.115][DEBUG] [Main Thread] Work left...
[02/27/19 21:43:19.116][DEBUG] [Main Thread] Updating big status...
[02/27/19 21:43:19.116][DEBUG] [Main Thread] Enabling menu items...
[02/27/19 21:43:19.184][DEBUG] [Main Thread] Set target icons...
[02/27/19 21:43:19.185][DEBUG] [Main Thread] Removing camera protection...
[02/27/19 21:44:33.114][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:44:33.129][DEBUG] [MF Update Thread] Performing serialize...
[02/27/19 21:44:47.165][DEBUG] [Sequence Thread] Restoring system standby state...
[02/27/19 21:44:48.701][DEBUG] [Main Thread] Filter wheel is required...
[02/27/19 21:44:48.701][DEBUG] [Main Thread] Filter wheel is still connected.  Ignoring connect step...
[02/27/19 21:44:48.701][DEBUG] [Main Thread] Focuser is required...
[02/27/19 21:44:48.701][DEBUG] [Main Thread] Focuser is still connected.  Ignoring connect step...
[02/27/19 21:44:48.701][DEBUG] [Main Thread] Telescope is required...
[02/27/19 21:44:48.701][DEBUG] [Main Thread] Telescope is still connected.  Ignoring connect step...
[02/27/19 21:44:48.702][DEBUG] [Main Thread] Rotator is required...
[02/27/19 21:44:48.702][DEBUG] [Main Thread] Rotator is still connected.  Ignoring connect step...
[02/27/19 21:44:48.879][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:44:48.891][DEBUG] [Main Thread] GNS Startup...
[02/27/19 21:44:48.900][DEBUG] [Sequence Thread] Dispatch loop: Received SGM_RUN_SEQUENCE...
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] GuiderCheck: Checking auto guider status...
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] GuiderCheck: Auto guider reports connected...
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] Checking auto guider version...
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] PHD2: Performing version check...
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] PHD2: Min version is 2.6.0
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] PHD2: User version is 2.6.5dev7
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] ************** SEQUENCE DUMP **************
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] sDirectory: C:\Users\user\OneDrive\Astrophotography\SGPro\Images
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] sBaseName: 
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] nDelayFirst: 0
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] nDelayBetween: 0
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] bFinishFullEventFirst: False
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] arEventGroups: System.Collections.Generic.List`1[SequenceGenerator.EventGroup]
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] nCurrentEventIndex: 3
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] dtElapsedTime: 01/01/0001 00:00:00 +00:00
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] bStarted: True
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] bIsSequenceRunning: False
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] sFileNamePattern: %tn\%dt\%ft\%tn_%ft_%el_%bi_%su_%fe_%cg_%dt_%tm_%fn_%ct
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] sVersion: 3.0.3.151
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] tsElapsedTime: 01:31:20
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] bCaptureUntil: False
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] dtCaptureUntil: 27/02/2019 15:47:00
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] userProfile: SequenceGenerator.UserProfile
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] nAfNebulosityRejection: 0.85
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] sequenceFiles: System.Collections.Generic.Dictionary`2[System.String,System.String]
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] sequenceFileList: System.Collections.Generic.List`1[SequenceGenerator.SequenceFile]
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] imageHistory: SequenceGenerator.ImageHistoryManager
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] nAfSampleSize: 100
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] bCaptureCalFramesIfSequenceFails: False
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] notificationsList: System.Collections.Generic.List`1[SequenceGenerator.NotoficationInfo]
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] bRunEndOfSequenceScript: False
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] sEndOfSequenceScript: 
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] bDisconnectAllGearOnSequenceEnd: False
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] ************** PROFILE DUMP **************
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] sForImagingInstance: Sequence Generator Pro
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] sProfileName: ASI 1600 150p
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] bDefault: False
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] sCameraName: ASI Camera (1)
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] nGain1x1: 0
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] nOffset1x1: 100
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] nGain2x2: 0
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] nOffset2x2: 100
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] nGain3x3: 0
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] nOffset3x3: 100
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] nGain4x4: 0
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] nOffset4x4: 100
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] nCooldownTemp: -15
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] nCooldownTime: 5
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] nWarmupTemp: 20
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] nWarmupTime: 10
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] bAutoCoolDown: True
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] bAutoWarmUp: True
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] sFilterWheelName: ZWO FilterWheel (1)
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] nFilterDelay: 0
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] sFocuserName: HitecDCFocus Focuser
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] bReverseFocuser: False
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] nFineFocusStepSize: 5
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] nCoarseFocusStepSize: 50
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] bAutoAdjustFocusPerFilter: True
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] bAutoFocusForFilterChangeOnly: True
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] bUseAutoFocus: False
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] bAutoFocusPerFrame: False
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] bAutoFocusOverTime: False
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] nAutoFocusFramerInterval: 1
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] nAutoFocusTimerInterval: 60
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] bAutoFocusForceForFilter: False
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] bAutoFocusBeforeFirstFrame: False
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] bAutoFocusManualStar: False
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] bAutoManualFocusForFilterChangeOnly: True
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] bUseAutoManualFocus: True
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] bAutoManualFocusPerFrame: False
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] bAutoManualFocusOverTime: True
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] nAutoManualFocusFramerInterval: 1
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] nAutoManualFocusTimerInterval: 90
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] bAutoManualFocusForceForFilter: False
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] bAutoManualFocusBeforeFirstFrame: True
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] bOverrideMaxSteps: False
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] nOverrideMaxSteps: 1
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] bTempComp: False
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] nStepsPerDegree: 0
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] bPhdDither: True
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] nPhdDitherIndex: 1
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] nPhdSettleValue: 0.5
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] bRecalGuiderOnSlew: False
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] nDecRecalValue: 0
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] sTelescopeName: iOptron ASCOM Driver for Mount
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] bAutoSlew: False
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] tpFocusFrame: 
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] tpTargetFrame: 
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] bPausePhdDuringDownload: False
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] bShutdownPhdWhenDone: True
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] bParkTelescopeWhenDone: True
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] sReferenceImagePath: 
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] bAutoCenterFrame: False
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] siReference:    nEstRa:          0
   nEstDec:         0
   nRightAscention: 0
   nDeclination:    0
   nArcsecPerPixel: 0   nAngle:          -500
   bFlipped:        False
   sSearchType:     
   sBinning:        
   nExposureLength: 0
   sImagePath:      
   bFailed:         False
   sInfo:           
   bDoneSolving:    True
   nSides:          100
   nMaxSolveTime:   60

[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] siScope:    nEstRa:          0
   nEstDec:         0
   nRightAscention: 0
   nDeclination:    0
   nArcsecPerPixel: 0   nAngle:          269.13
   bFlipped:        False
   sSearchType:     Max Regions
   sBinning:        1x1
   nExposureLength: 0
   sImagePath:      
   bFailed:         True
   sInfo:           
   bDoneSolving:    True
   nSides:          0
   nMaxSolveTime:   60

[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] nSolverExposure1x1: 10
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] nSolverExposure2x2: 1
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] nSolverExposure3x3: 1
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] nSolverExposure4x4: 1
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] nArcsec1x1: 1.15515
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] nArcsec2x2: 0
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] nArcsec3x3: 0
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] nArcsec4x4: 0
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] sDithertext: Medium Dither
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] sAutoGuider: PHD2
[02/27/19 21:44:48.904][DEBUG] [Sequence Thread] nFFBinning: 3
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] nFFExposure: 1
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] nAFExposure: 1
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] nAFBinning: 0
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] nAFStepSize: 20
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] nAFDataPoints: 9
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] sPlateSolver: PlateSolve2
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] sAutoFocuser: Half Flux Radius
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] nAutoFocusDialogCloseDelay: 10
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] bAutoFocusDegree: False
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] bAutoManualFocusDegree: False
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] nAutoFocusDegreeInterval: 1
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] nAutoManualFocusDegreeInterval: 1
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] bAutoFocusAutoContinue: False
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] nNudgeSpeed: 0
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] bReverseNs: False
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] bReverseEw: False
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] nHiSpeedRate: 1.06666666666667
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] nLoSpeedRate: 0.5
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] sCameraGain1x1: Not Set
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] sCameraGain2x2: Not Set
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] sCameraGain3x3: Not Set
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] sCameraGain4x4: Not Set
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] sCameraOffset1x1: 
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] sCameraOffset2x2: 
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] sCameraOffset3x3: 
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] sCameraOffset4x4: 
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] bPauseAutoGuiderDuringAutoFocus: False
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] bUseSameStarsForAf: False
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] bSaveAfData: False
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] sSaveAfDataPath: C:\Users\James\OneDrive\Astrophotography\SGPro\Images
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] bAllowExternalScopeControl: False
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] sFFBinning: 2x2
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] sAFBinning: 2x2
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] nMountSettling: 0
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] ffExposure: 5
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] noFilter: SequenceGenerator.Filter
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] bAutoFocusOnResume: False
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] sFlatBoxName: No Flat Box
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] flatBoxBrightness: 0
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] bFocuserBacklash: False
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] nFocuserBacklashStepSize: 60
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] bFocuserBacklashMovesIn: False
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] nGuiderSettlingTime: 0
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] nAutoCenterAttempts: 3
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] nAutoCenterError: 50
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] bFrameRestart: False
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] nFrameRestartError: 0
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] bDoAutoMeridianFlip: True
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] autoMeridianFlipVals: SequenceGenerator.AutoMeridianFlipValues
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] bUseAfDarks: False
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] sAfDarksPath: 
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] bUseAutoCenterFilter: False
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] sAutoCenterFilter: Lum
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] bUseAutoFocusFilter: False
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] sAutoFocusFilter: Lum
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] bSettleAgBeforeAf: False
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] bUseHighSpeedDl: True
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] bBlindSolveFailover: True
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] nReadoutNoise: 2
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] ccdArraySize: {Width=4656, Height=3520}
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] nCameraGain1x1: 0
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] nCameraGain2x2: 0
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] nCameraGain3x3: 0
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] nCameraGain4x4: 0
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] sRotatorName: Manual Rotator
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] nRotationError: 3
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] bUseTemperDevice: False
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] bAutoFocusAfterFlip: False
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] bReverseManualRotatorCorrections: False
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] sObservatoryName: No Observatory
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] sObsType: Dome
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] SlavingVals: 	Radius:                0
	NorthOffset:           0
	VerticalOffset:        0
	GemOffset:             0
	SlavingFrequency:      60
	SlavingAngleAllowance: 0
	SlaveOnSeqStart:       False
	UnparkWithMount:       False
	ParkMountFirst:        False
	OpenShutterFirst:      False
	UnparkOpensShutter:    False
	ParkClosesShutter:     False

[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] bSlaveObsToScope: False
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] bPromptToPlaceLightBox: False
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] nDownloadTime1x1: 3
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] nDownloadTime2x2: 3
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] nDownloadTime3x3: 2
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] nDownloadTime4x4: 2
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] bAfCropFrames: False
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] nAfCropFramesPercent: 0
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] sFilePattern: 
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] sWeatherStationName: No Safety Monitor
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] nScopeFocalLength: 50
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] bCameraCooldownOnSequenceStart: False
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] sRtfNotes: 
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] bStopTracking: False
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] bHasCentralObstruction: False
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] sCustomVariables: 
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] sPhd2Profile: CEM60 With Finder Guider
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] bAutoConnectPhd2Gear: True
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] bAutoDisconnectPhd2Gear: False
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] bPauseGuiderDuringBacklashComp: False
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] bSetAbsPositiononFirstFilterChange: False
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] sEnvironmentDeviceName: No Environment Device
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] bSettleGuiderTime: False
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] equipmentData: System.Collections.Generic.Dictionary`2[System.String,SequenceGenerator.EquipmentData]
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] nMinStarSize: 6
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] telescopeSyncOption: Sync
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] nAutoguiderDitherEveryXFrameCount: 5
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] bFocusLockRestartWhenOutOfFocus: False
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] bFocusLockPreventFocuserMovement: False
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] ************** FILTER DUMP **************
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] >> FILTER 1: 
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] bActive: True
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] sName: None
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] nAfExposureTime: 1
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] nFocusPosition: 0
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] nFocusTemp: 0
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] nFlat1: 0
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] nFlat2: 0
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] nFlat3: 0
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] nFlat4: 0
[02/27/19 21:44:48.905][DEBUG] [Sequence Thread] nNumFlats: 0
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] flatsData: System.Collections.Generic.Dictionary`2[System.String,SequenceGenerator.FlatData]
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] flatsDataBin: System.Collections.Generic.Dictionary`2[System.String,SequenceGenerator.FlatData]
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] flatsDataIso: System.Collections.Generic.Dictionary`2[System.String,SequenceGenerator.FlatData]
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] sFocusWith: Default
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] arFocPositions: System.Collections.Generic.List`1[SequenceGenerator.FocusPosData]
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] >> FILTER 2: 
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] bActive: True
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] sName: Lum
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] nAfExposureTime: 4
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] nFocusPosition: 64700
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] nFocusTemp: 0
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] nFlat1: 0
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] nFlat2: 0
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] nFlat3: 0
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] nFlat4: 0
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] nNumFlats: 25
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] flatsData: System.Collections.Generic.Dictionary`2[System.String,SequenceGenerator.FlatData]
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] flatsDataBin: System.Collections.Generic.Dictionary`2[System.String,SequenceGenerator.FlatData]
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] flatsDataIso: System.Collections.Generic.Dictionary`2[System.String,SequenceGenerator.FlatData]
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] sFocusWith: Default
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] arFocPositions: System.Collections.Generic.List`1[SequenceGenerator.FocusPosData]
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] >> FILTER 3: 
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] bActive: True
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] sName: Red
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] nAfExposureTime: 4
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] nFocusPosition: 64697
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] nFocusTemp: 0
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] nFlat1: 0
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] nFlat2: 0
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] nFlat3: 0
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] nFlat4: 0
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] nNumFlats: 25
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] flatsData: System.Collections.Generic.Dictionary`2[System.String,SequenceGenerator.FlatData]
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] flatsDataBin: System.Collections.Generic.Dictionary`2[System.String,SequenceGenerator.FlatData]
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] flatsDataIso: System.Collections.Generic.Dictionary`2[System.String,SequenceGenerator.FlatData]
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] sFocusWith: Default
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] arFocPositions: System.Collections.Generic.List`1[SequenceGenerator.FocusPosData]
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] >> FILTER 4: 
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] bActive: True
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] sName: Green
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] nAfExposureTime: 4
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] nFocusPosition: 64679
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] nFocusTemp: 0
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] nFlat1: 0
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] nFlat2: 0
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] nFlat3: 0
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] nFlat4: 0
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] nNumFlats: 25
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] flatsData: System.Collections.Generic.Dictionary`2[System.String,SequenceGenerator.FlatData]
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] flatsDataBin: System.Collections.Generic.Dictionary`2[System.String,SequenceGenerator.FlatData]
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] flatsDataIso: System.Collections.Generic.Dictionary`2[System.String,SequenceGenerator.FlatData]
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] sFocusWith: Default
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] arFocPositions: System.Collections.Generic.List`1[SequenceGenerator.FocusPosData]
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] >> FILTER 5: 
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] bActive: True
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] sName: Blue
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] nAfExposureTime: 4
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] nFocusPosition: 64704
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] nFocusTemp: 0
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] nFlat1: 0
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] nFlat2: 0
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] nFlat3: 0
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] nFlat4: 0
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] nNumFlats: 25
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] flatsData: System.Collections.Generic.Dictionary`2[System.String,SequenceGenerator.FlatData]
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] flatsDataBin: System.Collections.Generic.Dictionary`2[System.String,SequenceGenerator.FlatData]
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] flatsDataIso: System.Collections.Generic.Dictionary`2[System.String,SequenceGenerator.FlatData]
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] sFocusWith: Default
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] arFocPositions: System.Collections.Generic.List`1[SequenceGenerator.FocusPosData]
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] >> FILTER 6: 
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] bActive: True
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] sName: Ha
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] nAfExposureTime: 8
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] nFocusPosition: 64702
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] nFocusTemp: 0
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] nFlat1: 0
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] nFlat2: 0
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] nFlat3: 0
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] nFlat4: 0
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] nNumFlats: 25
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] flatsData: System.Collections.Generic.Dictionary`2[System.String,SequenceGenerator.FlatData]
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] flatsDataBin: System.Collections.Generic.Dictionary`2[System.String,SequenceGenerator.FlatData]
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] flatsDataIso: System.Collections.Generic.Dictionary`2[System.String,SequenceGenerator.FlatData]
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] sFocusWith: Default
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] arFocPositions: System.Collections.Generic.List`1[SequenceGenerator.FocusPosData]
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] >> FILTER 7: 
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] bActive: False
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] sName: 
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] nAfExposureTime: 1
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] nFocusPosition: 0
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] nFocusTemp: 0
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] nFlat1: 0
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] nFlat2: 0
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] nFlat3: 0
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] nFlat4: 0
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] nNumFlats: 25
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] flatsData: System.Collections.Generic.Dictionary`2[System.String,SequenceGenerator.FlatData]
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] flatsDataBin: System.Collections.Generic.Dictionary`2[System.String,SequenceGenerator.FlatData]
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] flatsDataIso: System.Collections.Generic.Dictionary`2[System.String,SequenceGenerator.FlatData]
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] sFocusWith: Default
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] arFocPositions: System.Collections.Generic.List`1[SequenceGenerator.FocusPosData]
[02/27/19 21:44:48.906][DEBUG] [Sequence Thread] >> FILTER 8: 
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] bActive: False
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] sName: 
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] nAfExposureTime: 1
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] nFocusPosition: 0
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] nFocusTemp: 0
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] nFlat1: 0
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] nFlat2: 0
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] nFlat3: 0
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] nFlat4: 0
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] nNumFlats: 25
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] flatsData: System.Collections.Generic.Dictionary`2[System.String,SequenceGenerator.FlatData]
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] flatsDataBin: System.Collections.Generic.Dictionary`2[System.String,SequenceGenerator.FlatData]
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] flatsDataIso: System.Collections.Generic.Dictionary`2[System.String,SequenceGenerator.FlatData]
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] sFocusWith: Default
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] arFocPositions: System.Collections.Generic.List`1[SequenceGenerator.FocusPosData]
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] >> FILTER 9: 
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] bActive: False
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] sName: 
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] nAfExposureTime: 1
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] nFocusPosition: 0
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] nFocusTemp: 0
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] nFlat1: 0
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] nFlat2: 0
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] nFlat3: 0
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] nFlat4: 0
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] nNumFlats: 25
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] flatsData: System.Collections.Generic.Dictionary`2[System.String,SequenceGenerator.FlatData]
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] flatsDataBin: System.Collections.Generic.Dictionary`2[System.String,SequenceGenerator.FlatData]
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] flatsDataIso: System.Collections.Generic.Dictionary`2[System.String,SequenceGenerator.FlatData]
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] sFocusWith: Default
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] arFocPositions: System.Collections.Generic.List`1[SequenceGenerator.FocusPosData]
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] >> FILTER 10: 
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] bActive: False
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] sName: 
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] nAfExposureTime: 1
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] nFocusPosition: 0
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] nFocusTemp: 0
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] nFlat1: 0
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] nFlat2: 0
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] nFlat3: 0
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] nFlat4: 0
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] nNumFlats: 25
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] flatsData: System.Collections.Generic.Dictionary`2[System.String,SequenceGenerator.FlatData]
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] flatsDataBin: System.Collections.Generic.Dictionary`2[System.String,SequenceGenerator.FlatData]
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] flatsDataIso: System.Collections.Generic.Dictionary`2[System.String,SequenceGenerator.FlatData]
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] sFocusWith: Default
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] arFocPositions: System.Collections.Generic.List`1[SequenceGenerator.FocusPosData]
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] >> FILTER 11: 
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] bActive: False
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] sName: 
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] nAfExposureTime: 1
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] nFocusPosition: 0
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] nFocusTemp: 0
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] nFlat1: 0
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] nFlat2: 0
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] nFlat3: 0
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] nFlat4: 0
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] nNumFlats: 25
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] flatsData: System.Collections.Generic.Dictionary`2[System.String,SequenceGenerator.FlatData]
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] flatsDataBin: System.Collections.Generic.Dictionary`2[System.String,SequenceGenerator.FlatData]
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] flatsDataIso: System.Collections.Generic.Dictionary`2[System.String,SequenceGenerator.FlatData]
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] sFocusWith: Default
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] arFocPositions: System.Collections.Generic.List`1[SequenceGenerator.FocusPosData]
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] >> FILTER 12: 
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] bActive: False
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] sName: 
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] nAfExposureTime: 1
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] nFocusPosition: 0
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] nFocusTemp: 0
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] nFlat1: 0
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] nFlat2: 0
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] nFlat3: 0
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] nFlat4: 0
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] nNumFlats: 25
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] flatsData: System.Collections.Generic.Dictionary`2[System.String,SequenceGenerator.FlatData]
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] flatsDataBin: System.Collections.Generic.Dictionary`2[System.String,SequenceGenerator.FlatData]
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] flatsDataIso: System.Collections.Generic.Dictionary`2[System.String,SequenceGenerator.FlatData]
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] sFocusWith: Default
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] arFocPositions: System.Collections.Generic.List`1[SequenceGenerator.FocusPosData]
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] >> FILTER 13: 
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] bActive: False
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] sName: 
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] nAfExposureTime: 1
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] nFocusPosition: 0
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] nFocusTemp: 0
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] nFlat1: 0
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] nFlat2: 0
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] nFlat3: 0
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] nFlat4: 0
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] nNumFlats: 25
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] flatsData: System.Collections.Generic.Dictionary`2[System.String,SequenceGenerator.FlatData]
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] flatsDataBin: System.Collections.Generic.Dictionary`2[System.String,SequenceGenerator.FlatData]
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] flatsDataIso: System.Collections.Generic.Dictionary`2[System.String,SequenceGenerator.FlatData]
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] sFocusWith: Default
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] arFocPositions: System.Collections.Generic.List`1[SequenceGenerator.FocusPosData]
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] ************** EVENT DUMP **************
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] * Target ic405
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]   -Active:            False
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]   -Start Time:        False
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]   -Start:             24/02/2019 21:00:00
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]   -End Time:          False
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]   -End:               10/02/2019 22:32:00
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]   -Auto Rotate:       True
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]   -Auto Center:       True
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]   -Location set:      False
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]   -RA:                5.26486666666667
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]   -DEC:               34.4672388888889
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]   -Finish Full Event: False
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]   -Completed:         False
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]   -After End Time:    False
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]   -Rotate Camera:     True
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]   -Rotation:          90
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] ** Event 1
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]    -Active:        False
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]    -Frame Type:    Light
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]    -Filter:        5
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]    -Suffix:        
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]    -Exposure Time: 300
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]    -Binning:        1x1
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]    -Repeat:        24
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]    -Gain:          0
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]    -Offset:        100
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]    -Num Complete:  0
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] ** Event 2
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]    -Active:        True
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]    -Frame Type:    Light
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]    -Filter:        4
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]    -Suffix:        
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]    -Exposure Time: 120
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]    -Binning:        1x1
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]    -Repeat:        12
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]    -Gain:          0
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]    -Offset:        100
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]    -Num Complete:  0
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] ** Event 3
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]    -Active:        True
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]    -Frame Type:    Light
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]    -Filter:        3
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]    -Suffix:        
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]    -Exposure Time: 120
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]    -Binning:        1x1
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]    -Repeat:        12
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]    -Gain:          0
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]    -Offset:        100
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]    -Num Complete:  0
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] ** Event 4
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]    -Active:        True
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]    -Frame Type:    Light
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]    -Filter:        2
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]    -Suffix:        
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]    -Exposure Time: 120
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]    -Binning:        1x1
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]    -Repeat:        12
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]    -Gain:          0
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]    -Offset:        100
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]    -Num Complete:  0
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] ** Event 5
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]    -Active:        False
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]    -Frame Type:    Light
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]    -Filter:        0
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]    -Suffix:        
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]    -Exposure Time: 0
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]    -Binning:        1x1
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]    -Repeat:        1
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]    -Gain:          0
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]    -Offset:        100
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]    -Num Complete:  0
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] ** Event 6
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]    -Active:        False
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]    -Frame Type:    Light
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]    -Filter:        0
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]    -Suffix:        
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]    -Exposure Time: 0
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]    -Binning:        1x1
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]    -Repeat:        1
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]    -Gain:          0
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]    -Offset:        100
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]    -Num Complete:  0
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread] * Target m81
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]   -Active:            True
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]   -Start Time:        False
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]   -Start:             21/02/2019 20:38:00
[02/27/19 21:44:48.907][DEBUG] [Sequence Thread]   -End Time:          True
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]   -End:               28/02/2019 06:30:00
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]   -Auto Rotate:       True
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]   -Auto Center:       True
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]   -Location set:      False
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]   -RA:                9.96801388888889
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]   -DEC:               69.2559777777778
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]   -Finish Full Event: False
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]   -Completed:         False
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]   -After End Time:    False
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]   -Rotate Camera:     True
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]   -Rotation:          90
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread] ** Event 1
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Active:        True
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Frame Type:    Light
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Filter:        1
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Suffix:        
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Exposure Time: 30
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Binning:        1x1
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Repeat:        120
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Gain:          0
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Offset:        100
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Num Complete:  41
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread] ** Event 2
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Active:        True
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Frame Type:    Light
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Filter:        1
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Suffix:        
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Exposure Time: 30
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Binning:        1x1
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Repeat:        120
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Gain:          0
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Offset:        100
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Num Complete:  10
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread] ** Event 3
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Active:        True
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Frame Type:    Light
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Filter:        4
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Suffix:        
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Exposure Time: 90
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Binning:        1x1
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Repeat:        60
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Gain:          0
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Offset:        100
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Num Complete:  11
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread] ** Event 4
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Active:        True
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Frame Type:    Light
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Filter:        2
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Suffix:        
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Exposure Time: 90
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Binning:        1x1
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Repeat:        60
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Gain:          0
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Offset:        100
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Num Complete:  10
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread] ** Event 5
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Active:        True
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Frame Type:    Light
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Filter:        3
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Suffix:        
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Exposure Time: 90
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Binning:        1x1
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Repeat:        60
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Gain:          0
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Offset:        100
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Num Complete:  10
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread] ** Event 6
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Active:        False
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Frame Type:    Light
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Filter:        1
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Suffix:        
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Exposure Time: 30
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Binning:        1x1
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Repeat:        60
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Gain:          0
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Offset:        100
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Num Complete:  1
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread] * Target m95
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]   -Active:            False
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]   -Start Time:        True
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]   -Start:             28/02/2019 02:30:00
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]   -End Time:          True
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]   -End:               28/02/2019 04:15:00
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]   -Auto Rotate:       True
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]   -Auto Center:       True
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]   -Location set:      False
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]   -RA:                10.7880833333333
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]   -DEC:               12.2347666666667
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]   -Finish Full Event: True
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]   -Completed:         False
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]   -After End Time:    False
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]   -Rotate Camera:     True
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]   -Rotation:          90
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread] ** Event 1
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Active:        True
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Frame Type:    Light
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Filter:        1
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Suffix:        
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Exposure Time: 240
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Binning:        1x1
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Repeat:        12
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Gain:          0
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Offset:        100
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Num Complete:  0
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread] ** Event 2
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Active:        False
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Frame Type:    Light
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Filter:        1
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Suffix:        
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Exposure Time: 120
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Binning:        2x2
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Repeat:        4
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Gain:          0
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Offset:        100
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Num Complete:  0
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread] ** Event 3
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Active:        True
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Frame Type:    Light
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Filter:        4
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Suffix:        
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Exposure Time: 240
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Binning:        1x1
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Repeat:        10
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Gain:          0
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Offset:        100
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Num Complete:  0
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread] ** Event 4
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Active:        True
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Frame Type:    Light
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Filter:        2
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Suffix:        
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Exposure Time: 240
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Binning:        1x1
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Repeat:        10
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Gain:          0
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Offset:        100
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Num Complete:  0
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread] ** Event 5
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Active:        True
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Frame Type:    Light
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Filter:        3
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Suffix:        
[02/27/19 21:44:48.908][DEBUG] [Sequence Thread]    -Exposure Time: 240
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Binning:        1x1
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Repeat:        10
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Gain:          0
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Offset:        100
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Num Complete:  0
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread] ** Event 6
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Active:        False
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Frame Type:    Light
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Filter:        0
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Suffix:        
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Exposure Time: 0
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Binning:        1x1
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Repeat:        1
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Gain:          0
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Offset:        100
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Num Complete:  0
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread] * Target m101
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]   -Active:            False
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]   -Start Time:        True
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]   -Start:             28/02/2019 04:10:00
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]   -End Time:          True
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]   -End:               28/02/2019 06:02:00
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]   -Auto Rotate:       True
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]   -Auto Center:       True
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]   -Location set:      False
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]   -RA:                14.0469333333333
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]   -DEC:               54.3126277777778
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]   -Finish Full Event: False
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]   -Completed:         False
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]   -After End Time:    False
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]   -Rotate Camera:     True
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]   -Rotation:          90
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread] ** Event 1
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Active:        True
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Frame Type:    Light
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Filter:        1
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Suffix:        
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Exposure Time: 240
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Binning:        1x1
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Repeat:        10
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Gain:          0
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Offset:        100
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Num Complete:  0
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread] ** Event 2
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Active:        True
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Frame Type:    Light
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Filter:        1
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Suffix:        
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Exposure Time: 120
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Binning:        1x1
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Repeat:        4
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Gain:          0
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Offset:        100
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Num Complete:  0
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread] ** Event 3
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Active:        True
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Frame Type:    Light
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Filter:        4
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Suffix:        
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Exposure Time: 240
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Binning:        1x1
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Repeat:        10
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Gain:          0
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Offset:        100
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Num Complete:  0
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread] ** Event 4
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Active:        True
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Frame Type:    Light
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Filter:        2
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Suffix:        
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Exposure Time: 240
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Binning:        1x1
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Repeat:        10
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Gain:          0
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Offset:        100
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Num Complete:  0
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread] ** Event 5
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Active:        True
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Frame Type:    Light
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Filter:        3
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Suffix:        
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Exposure Time: 240
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Binning:        1x1
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Repeat:        10
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Gain:          0
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Offset:        100
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Num Complete:  0
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread] ** Event 6
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Active:        False
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Frame Type:    Light
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Filter:        0
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Suffix:        
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Exposure Time: 0
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Binning:        1x1
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Repeat:        1
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Gain:          0
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Offset:        100
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Num Complete:  0
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread] * Target Flat
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]   -Active:            False
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]   -Start Time:        False
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]   -Start:             27/02/2019 07:01:00
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]   -End Time:          False
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]   -End:               27/02/2019 07:01:00
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]   -Auto Rotate:       False
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]   -Auto Center:       False
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]   -Location set:      False
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]   -RA:                0
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]   -DEC:               0
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]   -Finish Full Event: True
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]   -Completed:         False
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]   -After End Time:    False
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]   -Rotate Camera:     False
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]   -Rotation:          0
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread] ** Event 1
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Active:        True
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Frame Type:    Light
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Filter:        0
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Suffix:        
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Exposure Time: 0
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Binning:        1x1
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Repeat:        1
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Gain:          0
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Offset:        100
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Num Complete:  0
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread] ** Event 2
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Active:        True
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Frame Type:    Light
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Filter:        0
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Suffix:        
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Exposure Time: 0
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Binning:        1x1
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Repeat:        1
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Gain:          0
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Offset:        100
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Num Complete:  0
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread] ** Event 3
[02/27/19 21:44:48.909][DEBUG] [Sequence Thread]    -Active:        True
[02/27/19 21:44:48.910][DEBUG] [Sequence Thread]    -Frame Type:    Light
[02/27/19 21:44:48.910][DEBUG] [Sequence Thread]    -Filter:        0
[02/27/19 21:44:48.910][DEBUG] [Sequence Thread]    -Suffix:        
[02/27/19 21:44:48.910][DEBUG] [Sequence Thread]    -Exposure Time: 0
[02/27/19 21:44:48.910][DEBUG] [Sequence Thread]    -Binning:        1x1
[02/27/19 21:44:48.910][DEBUG] [Sequence Thread]    -Repeat:        1
[02/27/19 21:44:48.910][DEBUG] [Sequence Thread]    -Gain:          0
[02/27/19 21:44:48.910][DEBUG] [Sequence Thread]    -Offset:        100
[02/27/19 21:44:48.910][DEBUG] [Sequence Thread]    -Num Complete:  0
[02/27/19 21:44:48.910][DEBUG] [Sequence Thread] ** Event 4
[02/27/19 21:44:48.910][DEBUG] [Sequence Thread]    -Active:        True
[02/27/19 21:44:48.910][DEBUG] [Sequence Thread]    -Frame Type:    Light
[02/27/19 21:44:48.910][DEBUG] [Sequence Thread]    -Filter:        0
[02/27/19 21:44:48.910][DEBUG] [Sequence Thread]    -Suffix:        
[02/27/19 21:44:48.910][DEBUG] [Sequence Thread]    -Exposure Time: 0
[02/27/19 21:44:48.910][DEBUG] [Sequence Thread]    -Binning:        1x1
[02/27/19 21:44:48.910][DEBUG] [Sequence Thread]    -Repeat:        1
[02/27/19 21:44:48.910][DEBUG] [Sequence Thread]    -Gain:          0
[02/27/19 21:44:48.910][DEBUG] [Sequence Thread]    -Offset:        100
[02/27/19 21:44:48.910][DEBUG] [Sequence Thread]    -Num Complete:  0
[02/27/19 21:44:48.910][DEBUG] [Sequence Thread] ** Event 5
[02/27/19 21:44:48.910][DEBUG] [Sequence Thread]    -Active:        True
[02/27/19 21:44:48.910][DEBUG] [Sequence Thread]    -Frame Type:    Light
[02/27/19 21:44:48.910][DEBUG] [Sequence Thread]    -Filter:        0
[02/27/19 21:44:48.910][DEBUG] [Sequence Thread]    -Suffix:        
[02/27/19 21:44:48.910][DEBUG] [Sequence Thread]    -Exposure Time: 0
[02/27/19 21:44:48.910][DEBUG] [Sequence Thread]    -Binning:        1x1
[02/27/19 21:44:48.910][DEBUG] [Sequence Thread]    -Repeat:        1
[02/27/19 21:44:48.910][DEBUG] [Sequence Thread]    -Gain:          0
[02/27/19 21:44:48.910][DEBUG] [Sequence Thread]    -Offset:        100
[02/27/19 21:44:48.910][DEBUG] [Sequence Thread]    -Num Complete:  0
[02/27/19 21:44:48.910][DEBUG] [Sequence Thread] ************** END SEQUENCE DUMP **************
[02/27/19 21:44:48.910][DEBUG] [Sequence Thread] ********** Run sequence started **********
[02/27/19 21:44:49.149][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Sequence has started...
[02/27/19 21:44:49.149][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Sequence has started...)...
[02/27/19 21:44:49.149][DEBUG] [Sequence Thread] Checking if observatory requires auto slaving...
[02/27/19 21:44:49.149][DEBUG] [Sequence Thread] Observatory does not require auto slave...
[02/27/19 21:44:49.149][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:44:49.150][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:44:49.164][DEBUG] [Sequence Thread] Running pre event...
[02/27/19 21:44:49.197][DEBUG] [Sequence Thread] Current target has end time at 28/02/2019 06:30:00
[02/27/19 21:44:49.197][DEBUG] [Sequence Thread] End time of next frame is at 27/02/2019 21:46:19
[02/27/19 21:44:49.197][DEBUG] [Sequence Thread] Target is still before end time, continuing...
[02/27/19 21:44:49.197][DEBUG] [Sequence Thread] Running capture event...
[02/27/19 21:44:49.198][DEBUG] [Sequence Thread] ------------- Starting capture frame for event[3] -------------
[02/27/19 21:44:49.206][DEBUG] [Sequence Thread] Sending commands...
[02/27/19 21:44:49.206][DEBUG] [Sequence Thread] SetFlatBox: Frame Type is Light
[02/27/19 21:44:49.206][DEBUG] [Sequence Thread] EventMarker 2 - t:m81 (1); e:3; f:10; o:
[02/27/19 21:44:49.206][DEBUG] [Sequence Thread] Checking if Meridian Flip is needed
[02/27/19 21:44:49.206][DEBUG] [Sequence Thread] Telescope is on the West side of the mount
[02/27/19 21:44:49.206][DEBUG] [Sequence Thread] Meridian Flip not needed, Hour Angle < Degrees Past To Flip: -30.1510197144101 < 0
[02/27/19 21:44:49.206][DEBUG] [Sequence Thread] EventMarker 3 - t:m81 (1); e:3; f:10; o:
[02/27/19 21:44:49.207][DEBUG] [Sequence Thread] EventMarker 4 - t:m81 (1); e:3; f:10; o:
[02/27/19 21:44:49.207][DEBUG] [Sequence Thread] Setting filter position 2...
[02/27/19 21:44:49.207][DEBUG] [Sequence Thread] Filter position 2 is already set.  Skipping...
[02/27/19 21:44:49.207][DEBUG] [Sequence Thread] EventMarker 5 - t:m81 (1); e:3; f:10; o:
[02/27/19 21:44:49.207][DEBUG] [Sequence Thread] Checking for auto manual focus (pre)...
[02/27/19 21:44:49.207][DEBUG] [Sequence Thread] EventMarker 6 - t:m81 (1); e:3; f:10; o:
[02/27/19 21:44:49.215][DEBUG] [Sequence Thread] Autoguider will not dither this frame. Total frames is not a modulus of 5
[02/27/19 21:44:49.215][DEBUG] [Sequence Thread] EventMarker 1 - t:m81 (1); e:3; f:10; o:
[02/27/19 21:44:49.216][DEBUG] [Sequence Thread] Created base name for frame capture: m81_Light_90sec_1x1__Red_gain_76_2019-02-27_214449_frame11_-15C
[02/27/19 21:44:49.216][DEBUG] [Sequence Thread] Created directory for frame capture: C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\
[02/27/19 21:44:49.216][DEBUG] [Sequence Thread] EventMarker 7 - t:m81 (1); e:3; f:10; o:
[02/27/19 21:44:49.216][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:44:49.216][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:3; f:10; o:
[02/27/19 21:44:49.216][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:44:49.216][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:44:49.216][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:44:49.316][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:44:49.316][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:44:49.316][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:3; f:10; o:
[02/27/19 21:44:49.317][DEBUG] [Sequence Thread] {"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}
[02/27/19 21:44:49.317][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}

[02/27/19 21:44:49.317][DEBUG] [Sequence Thread] EventMarker 172 - t:m81 (1); e:3; f:10; o:
[02/27/19 21:44:49.317][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:44:49.317][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:44:49.317][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:44:49.414][DEBUG] [PHD2 Listener Thread] Unknown object from PHD2: {"Event":"SettleBegin","Timestamp":1551303889.364,"Host":"JGL2_2","Inst":1}
[02/27/19 21:44:49.417][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:44:49.417][DEBUG] [Sequence Thread] EventMarker 173 - t:m81 (1); e:3; f:10; o:
[02/27/19 21:44:49.418][DEBUG] [Sequence Thread] User has elected to skip guider settling over time...
[02/27/19 21:44:49.418][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Attempting to settle the auto guider...
[02/27/19 21:44:49.418][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Attempting to settle the auto guider...)...
[02/27/19 21:44:49.418][DEBUG] [Sequence Thread] Waiting for Auto Guider distance to fall below 0.5
[02/27/19 21:44:49.418][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:44:49.418][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:44:49.427][DEBUG] [Sequence Thread] Distance is below 0.5, starting timer...
[02/27/19 21:44:49.927][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:44:49.927][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:44:49.934][DEBUG] [Sequence Thread] Distance stayed below 0.5 for 0 seconds, done settling...
[02/27/19 21:44:49.935][DEBUG] [Sequence Thread] Auto guider has settled...
[02/27/19 21:44:49.935][DEBUG] [Sequence Thread] EventMarker 8 - t:m81 (1); e:3; f:10; o:
[02/27/19 21:44:49.935][DEBUG] [Sequence Thread] EventMarker 9 - t:m81 (1); e:3; f:10; o:
[02/27/19 21:44:49.935][DEBUG] [Sequence Thread] EventMarker 10 - t:m81 (1); e:3; f:10; o:
[02/27/19 21:44:49.935][DEBUG] [Sequence Thread] Finished sending frame capture.  Entering wait mode...
[02/27/19 21:44:49.935][DEBUG] [Sequence Thread] EventMarker 11 - t:m81 (1); e:3; f:10; o:
[02/27/19 21:44:49.936][DEBUG] [Sequence Thread] EventMarker 12 - t:m81 (1); e:3; f:10; o:
[02/27/19 21:44:49.939][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE message received...
[02/27/19 21:44:49.940][DEBUG] [Camera Thread] SetAscomGain to 76
[02/27/19 21:44:49.941][DEBUG] [Camera Thread] Camera gain set to 76
[02/27/19 21:44:49.941][DEBUG] [Camera Thread] SetAscomNormalSpeed... 
[02/27/19 21:44:49.941][DEBUG] [Camera Thread] Cannot set readout speed, not supported by camera...
[02/27/19 21:44:49.942][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Starting integration of m81; Event 4; Frame 11 for 90s...
[02/27/19 21:44:49.942][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Starting integration of m81; Event 4; Frame 11 for 90s...)...
[02/27/19 21:44:49.942][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, TimedError): (2019-02-25) Failure while integrating m81; Event 4; Frame 11 for 90s. Image has not downloaded in alloted time period.
[02/27/19 21:44:49.942][DEBUG] [Sequence Thread] GNS: Sent timed event to GNS...
[02/27/19 21:44:49.943][DEBUG] [Sequence Thread] EventMarker 13 - t:m81 (1); e:3; f:10; o:
[02/27/19 21:44:50.020][DEBUG] [PHD2 Listener Thread] PHD2: Settle done received: GOOD
[02/27/19 21:44:54.167][DEBUG] [Main Thread] --> Find stars (normal)
[02/27/19 21:44:54.232][DEBUG] [Main Thread] AF frame was too large... downsample = 0.5...
[02/27/19 21:44:55.616][DEBUG] [Main Thread] Star detection using min star size of 3px...
[02/27/19 21:44:55.616][DEBUG] [Main Thread] Star detection using max star size of 60px...
[02/27/19 21:44:55.656][DEBUG] [Main Thread] Find stars took: 1488 ms...
[02/27/19 21:44:55.656][DEBUG] [Main Thread] Star list contains 171 stars...
[02/27/19 21:44:55.656][DEBUG] [Main Thread] Calculating HFR with sample size: 6
[02/27/19 21:45:17.126][DEBUG] [Main Thread] Display image preview using asynch task...
[02/27/19 21:45:26.485][DEBUG] [Main Thread] Display image preview using asynch task...
[02/27/19 21:46:19.955][DEBUG] [Sequence Thread] EventMarker 15 - t:m81 (1); e:3; f:10; o:
[02/27/19 21:46:19.961][DEBUG] [Sequence Thread] Waking from exposure time sleep period...
[02/27/19 21:46:19.962][DEBUG] [Sequence Thread] Checking to see if the CCD has a temp...
[02/27/19 21:46:19.962][DEBUG] [Sequence Thread] Saving the CCD temp...
[02/27/19 21:46:19.975][DEBUG] [Sequence Thread] Entering super dangerous loop to await image completion...
[02/27/19 21:46:19.977][DEBUG] [Sequence Thread] EventMarker 16 - t:m81 (1); e:3; f:10; o:
[02/27/19 21:46:21.203][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE complete...
[02/27/19 21:46:21.482][DEBUG] [Sequence Thread] EventMarker 17 - t:m81 (1); e:3; f:10; o:
[02/27/19 21:46:21.482][DEBUG] [Sequence Thread] Image reported as complete.  Continuing...
[02/27/19 21:46:21.482][DEBUG] [Sequence Thread] Collecting FITs headers...
[02/27/19 21:46:21.483][DEBUG] [Sequence Thread] ASCOM Camera: Could not get last exposure start time.  Reported as (unknown)
[02/27/19 21:46:21.483][DEBUG] [Sequence Thread] DATE-LOC time provided by SGPro (failed to retrieve valid entry from camera)...
[02/27/19 21:46:21.484][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info for last solve...
[02/27/19 21:46:21.484][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info from UI...
[02/27/19 21:46:21.484][DEBUG] [Sequence Thread] Clearing timed monitoring events...
[02/27/19 21:46:21.488][DEBUG] [Sequence Thread] Created full file name (file does not exist): C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\m81_Light_90sec_1x1__Red_gain_76_2019-02-27_214449_frame11_-15C.fit
[02/27/19 21:46:21.488][DEBUG] [Sequence Thread] SaveFileAscom: Start...
[02/27/19 21:46:21.488][DEBUG] [Sequence Thread] SaveFileAscom: Checking image data...
[02/27/19 21:46:21.488][DEBUG] [Sequence Thread] SaveFileAscom: Create normal preview bitmap...
[02/27/19 21:46:21.494][DEBUG] [Sequence Thread] SaveFileAscom: Locking preview bits...
[02/27/19 21:46:21.494][DEBUG] [Sequence Thread] SaveFileAscom: Validating file name...
[02/27/19 21:46:21.494][DEBUG] [Sequence Thread] SaveFileAscom: Starting byte traversal...
[02/27/19 21:46:21.676][DEBUG] [Sequence Thread] SaveFileAscom: Unlocking preview bits...
[02/27/19 21:46:21.676][DEBUG] [Sequence Thread] SaveFileAscom: Saving preview bitmap to disk...
[02/27/19 21:46:21.676][DEBUG] [Sequence Thread] SaveFileBmp16: Locking bitmap for disk write...
[02/27/19 21:46:21.676][DEBUG] [Sequence Thread] SaveFileBmp16: Opening file stream...
[02/27/19 21:46:21.677][DEBUG] [Sequence Thread] SaveFileBmp16: Writing FITS headers...
[02/27/19 21:46:21.677][DEBUG] [Sequence Thread] SaveFileBmp16: Traversing and persisting bitmap data...
[02/27/19 21:46:21.846][DEBUG] [Sequence Thread] SaveFileBmp16: FITS block fill...
[02/27/19 21:46:21.846][DEBUG] [Sequence Thread] SaveFileBmp16: Unlocking bitmap...
[02/27/19 21:46:21.846][DEBUG] [Sequence Thread] SaveFileBmp16: Closing file stream
[02/27/19 21:46:21.850][DEBUG] [Sequence Thread] SaveFileAscom: Displaying image preview in UI...
[02/27/19 21:46:21.850][DEBUG] [Sequence Thread] Internal Interface: Set Preview...
[02/27/19 21:46:21.850][DEBUG] [Sequence Thread] Display image preview using asynch task...
[02/27/19 21:46:22.581][DEBUG] [Main Thread] --> Find stars (normal)
[02/27/19 21:46:22.654][DEBUG] [Main Thread] AF frame was too large... downsample = 0.5...
[02/27/19 21:46:24.379][DEBUG] [Main Thread] Star detection using min star size of 3px...
[02/27/19 21:46:24.379][DEBUG] [Main Thread] Star detection using max star size of 60px...
[02/27/19 21:46:24.426][DEBUG] [Main Thread] Find stars took: 1845 ms...
[02/27/19 21:46:24.426][DEBUG] [Main Thread] Star list contains 131 stars...
[02/27/19 21:46:24.426][DEBUG] [Main Thread] Calculating HFR with sample size: 6
[02/27/19 21:46:25.049][DEBUG] [Sequence Thread] SaveFileAscom: Done
[02/27/19 21:46:25.049][DEBUG] [Sequence Thread] =========== Save file took 3565 ms
[02/27/19 21:46:25.050][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Image "m81_Light_90sec_1x1__Red_gain_76_2019-02-27_214449_frame11_-15C.fit" saved.  HFR = 2.81.
[02/27/19 21:46:25.050][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Image "m81_Light_90sec_1x1__Red_gain_76_2019-02-27_214449_frame11_-15C.fit" saved.  HFR = 2.81.)...
[02/27/19 21:46:25.053][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:46:25.053][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:3; f:10; o:
[02/27/19 21:46:25.053][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:46:25.053][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:46:25.053][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:46:25.154][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:46:25.154][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:46:25.154][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:3; f:10; o:
[02/27/19 21:46:25.154][DEBUG] [Sequence Thread] EventMarker 18 - t:m81 (1); e:3; f:10; o:
[02/27/19 21:46:25.163][DEBUG] [Sequence Thread] EventMarker 19 - t:m81 (1); e:3; f:11; o:
[02/27/19 21:46:25.163][DEBUG] [Sequence Thread] EventMarker 20 - t:m81 (1); e:3; f:11; o:
[02/27/19 21:46:25.163][DEBUG] [Sequence Thread] Running post event...
[02/27/19 21:46:25.163][DEBUG] [Sequence Thread] EventMarker 21 - t:m81 (1); e:3; f:11; o:
[02/27/19 21:46:25.166][DEBUG] [Sequence Thread] Incremented numComplete (11) for event[3]...
[02/27/19 21:46:25.168][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:46:25.168][DEBUG] [Sequence Thread] Current event[3] frame count: 11/60...
[02/27/19 21:46:25.168][DEBUG] [Sequence Thread] Looking at event[4]...
[02/27/19 21:46:25.168][DEBUG] [Sequence Thread] Found event event[4] with remaining frames.
[02/27/19 21:46:25.168][DEBUG] [Sequence Thread] Event[4] frame count: 10/60...
[02/27/19 21:46:25.168][DEBUG] [Sequence Thread] Getting next event (4)...
[02/27/19 21:46:25.168][DEBUG] [Sequence Thread] Checking for auto manual focus (post)...
[02/27/19 21:46:25.168][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:46:25.180][DEBUG] [Sequence Thread] Attempting to move to next event...
[02/27/19 21:46:25.180][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:46:25.181][DEBUG] [Sequence Thread] Current event[3] frame count: 11/60...
[02/27/19 21:46:25.181][DEBUG] [Sequence Thread] Looking at event[4]...
[02/27/19 21:46:25.181][DEBUG] [Sequence Thread] Found event event[4] with remaining frames.
[02/27/19 21:46:25.181][DEBUG] [Sequence Thread] Event[4] frame count: 10/60...
[02/27/19 21:46:25.181][DEBUG] [Sequence Thread] Getting next event (4)...
[02/27/19 21:46:25.181][DEBUG] [Sequence Thread] Running pre event...
[02/27/19 21:46:25.191][DEBUG] [Sequence Thread] Current target has end time at 28/02/2019 06:30:00
[02/27/19 21:46:25.191][DEBUG] [Sequence Thread] End time of next frame is at 27/02/2019 21:47:55
[02/27/19 21:46:25.191][DEBUG] [Sequence Thread] Target is still before end time, continuing...
[02/27/19 21:46:25.191][DEBUG] [Sequence Thread] Running capture event...
[02/27/19 21:46:25.192][DEBUG] [Sequence Thread] ------------- Starting capture frame for event[4] -------------
[02/27/19 21:46:25.197][DEBUG] [Sequence Thread] Sending commands...
[02/27/19 21:46:25.197][DEBUG] [Sequence Thread] SetFlatBox: Frame Type is Light
[02/27/19 21:46:25.197][DEBUG] [Sequence Thread] EventMarker 2 - t:m81 (1); e:4; f:10; o:
[02/27/19 21:46:25.197][DEBUG] [Sequence Thread] Checking if Meridian Flip is needed
[02/27/19 21:46:25.197][DEBUG] [Sequence Thread] Telescope is on the West side of the mount
[02/27/19 21:46:25.197][DEBUG] [Sequence Thread] Meridian Flip not needed, Hour Angle < Degrees Past To Flip: -29.7325873220998 < 0
[02/27/19 21:46:25.197][DEBUG] [Sequence Thread] EventMarker 3 - t:m81 (1); e:4; f:10; o:
[02/27/19 21:46:25.198][DEBUG] [Sequence Thread] EventMarker 4 - t:m81 (1); e:4; f:10; o:
[02/27/19 21:46:25.198][DEBUG] [Sequence Thread] Setting filter position 3...
[02/27/19 21:46:25.204][DEBUG] [Sequence Thread] Setting filter: Green...
[02/27/19 21:46:25.204][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 1...
[02/27/19 21:46:25.204][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 1 is complete...
[02/27/19 21:46:25.407][DEBUG] [Sequence Thread] Adjust focuser pos per filter: Moving focsuer to focus position (64679)...
[02/27/19 21:46:25.407][DEBUG] [Sequence Thread] Adjust focuser pos per filter
[02/27/19 21:46:25.407][DEBUG] [Sequence Thread] Old filter: Red; Focus pos: 64697
[02/27/19 21:46:25.407][DEBUG] [Sequence Thread] New filter: Green; Focus pos: 64679
[02/27/19 21:46:25.407][DEBUG] [Sequence Thread] Pos delta: -18 steps
[02/27/19 21:46:25.407][DEBUG] [Sequence Thread] New position-> (current: 4845) + (delta: -18) = 4827
[02/27/19 21:46:25.407][DEBUG] [Sequence Thread] Focuser moving to 4827
[02/27/19 21:46:26.165][DEBUG] [Sequence Thread] Focuser move call complete
[02/27/19 21:46:26.230][DEBUG] [Sequence Thread] Focuser position matches requested position (4827), continuing...
[02/27/19 21:46:26.230][DEBUG] [Sequence Thread] focuser move is complete...
[02/27/19 21:46:26.233][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 2...
[02/27/19 21:46:28.233][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 2 complete...
[02/27/19 21:46:28.242][DEBUG] [Sequence Thread] EventMarker 5 - t:m81 (1); e:4; f:10; o:
[02/27/19 21:46:28.242][DEBUG] [Sequence Thread] Checking for auto manual focus (pre)...
[02/27/19 21:46:28.242][DEBUG] [Sequence Thread] EventMarker 6 - t:m81 (1); e:4; f:10; o:
[02/27/19 21:46:28.254][DEBUG] [Sequence Thread] Autoguider will not dither this frame. Total frames is not a modulus of 5
[02/27/19 21:46:28.254][DEBUG] [Sequence Thread] EventMarker 1 - t:m81 (1); e:4; f:10; o:
[02/27/19 21:46:28.254][DEBUG] [Sequence Thread] Created base name for frame capture: m81_Light_90sec_1x1__Green_gain_76_2019-02-27_214628_frame11_-15C
[02/27/19 21:46:28.254][DEBUG] [Sequence Thread] Created directory for frame capture: C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\
[02/27/19 21:46:28.254][DEBUG] [Sequence Thread] EventMarker 7 - t:m81 (1); e:4; f:10; o:
[02/27/19 21:46:28.254][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:46:28.254][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:4; f:10; o:
[02/27/19 21:46:28.254][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:46:28.254][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:46:28.254][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:46:28.356][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:46:28.356][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:46:28.356][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:4; f:10; o:
[02/27/19 21:46:28.356][DEBUG] [Sequence Thread] {"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}
[02/27/19 21:46:28.356][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}

[02/27/19 21:46:28.356][DEBUG] [Sequence Thread] EventMarker 172 - t:m81 (1); e:4; f:10; o:
[02/27/19 21:46:28.356][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:46:28.356][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:46:28.356][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:46:28.412][DEBUG] [PHD2 Listener Thread] Unknown object from PHD2: {"Event":"SettleBegin","Timestamp":1551303988.362,"Host":"JGL2_2","Inst":1}
[02/27/19 21:46:28.457][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:46:28.457][DEBUG] [Sequence Thread] EventMarker 173 - t:m81 (1); e:4; f:10; o:
[02/27/19 21:46:28.457][DEBUG] [Sequence Thread] User has elected to skip guider settling over time...
[02/27/19 21:46:28.458][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Attempting to settle the auto guider...
[02/27/19 21:46:28.458][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Attempting to settle the auto guider...)...
[02/27/19 21:46:28.458][DEBUG] [Sequence Thread] Waiting for Auto Guider distance to fall below 0.5
[02/27/19 21:46:28.458][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:46:28.458][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:46:28.469][DEBUG] [Sequence Thread] Distance is below 0.5, starting timer...
[02/27/19 21:46:28.970][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:46:28.970][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:46:28.981][DEBUG] [Sequence Thread] Distance stayed below 0.5 for 0 seconds, done settling...
[02/27/19 21:46:28.981][DEBUG] [Sequence Thread] Auto guider has settled...
[02/27/19 21:46:28.982][DEBUG] [Sequence Thread] EventMarker 8 - t:m81 (1); e:4; f:10; o:
[02/27/19 21:46:28.982][DEBUG] [Sequence Thread] EventMarker 9 - t:m81 (1); e:4; f:10; o:
[02/27/19 21:46:28.982][DEBUG] [Sequence Thread] EventMarker 10 - t:m81 (1); e:4; f:10; o:
[02/27/19 21:46:28.982][DEBUG] [Sequence Thread] Finished sending frame capture.  Entering wait mode...
[02/27/19 21:46:28.982][DEBUG] [Sequence Thread] EventMarker 11 - t:m81 (1); e:4; f:10; o:
[02/27/19 21:46:28.982][DEBUG] [Sequence Thread] EventMarker 12 - t:m81 (1); e:4; f:10; o:
[02/27/19 21:46:28.987][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE message received...
[02/27/19 21:46:28.989][DEBUG] [Camera Thread] SetAscomGain to 76
[02/27/19 21:46:28.990][DEBUG] [Camera Thread] Camera gain set to 76
[02/27/19 21:46:28.990][DEBUG] [Camera Thread] SetAscomNormalSpeed... 
[02/27/19 21:46:28.990][DEBUG] [Camera Thread] Cannot set readout speed, not supported by camera...
[02/27/19 21:46:28.992][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Starting integration of m81; Event 5; Frame 11 for 90s...
[02/27/19 21:46:28.992][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Starting integration of m81; Event 5; Frame 11 for 90s...)...
[02/27/19 21:46:28.992][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, TimedError): (2019-02-25) Failure while integrating m81; Event 5; Frame 11 for 90s. Image has not downloaded in alloted time period.
[02/27/19 21:46:28.992][DEBUG] [Sequence Thread] GNS: Sent timed event to GNS...
[02/27/19 21:46:28.994][DEBUG] [Sequence Thread] EventMarker 13 - t:m81 (1); e:4; f:10; o:
[02/27/19 21:46:29.977][DEBUG] [PHD2 Listener Thread] PHD2: Settle done received: GOOD
[02/27/19 21:47:27.988][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:47:28.007][DEBUG] [MF Update Thread] Performing serialize...
[02/27/19 21:47:58.984][DEBUG] [Sequence Thread] EventMarker 15 - t:m81 (1); e:4; f:10; o:
[02/27/19 21:47:58.989][DEBUG] [Sequence Thread] Waking from exposure time sleep period...
[02/27/19 21:47:58.989][DEBUG] [Sequence Thread] Checking to see if the CCD has a temp...
[02/27/19 21:47:58.989][DEBUG] [Sequence Thread] Saving the CCD temp...
[02/27/19 21:47:59.000][DEBUG] [Sequence Thread] Entering super dangerous loop to await image completion...
[02/27/19 21:47:59.003][DEBUG] [Sequence Thread] EventMarker 16 - t:m81 (1); e:4; f:10; o:
[02/27/19 21:48:00.260][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE complete...
[02/27/19 21:48:00.510][DEBUG] [Sequence Thread] EventMarker 17 - t:m81 (1); e:4; f:10; o:
[02/27/19 21:48:00.510][DEBUG] [Sequence Thread] Image reported as complete.  Continuing...
[02/27/19 21:48:00.511][DEBUG] [Sequence Thread] Collecting FITs headers...
[02/27/19 21:48:00.511][DEBUG] [Sequence Thread] ASCOM Camera: Could not get last exposure start time.  Reported as (unknown)
[02/27/19 21:48:00.511][DEBUG] [Sequence Thread] DATE-LOC time provided by SGPro (failed to retrieve valid entry from camera)...
[02/27/19 21:48:00.512][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info for last solve...
[02/27/19 21:48:00.512][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info from UI...
[02/27/19 21:48:00.513][DEBUG] [Sequence Thread] Clearing timed monitoring events...
[02/27/19 21:48:00.516][DEBUG] [Sequence Thread] Created full file name (file does not exist): C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\m81_Light_90sec_1x1__Green_gain_76_2019-02-27_214628_frame11_-15C.fit
[02/27/19 21:48:00.516][DEBUG] [Sequence Thread] SaveFileAscom: Start...
[02/27/19 21:48:00.516][DEBUG] [Sequence Thread] SaveFileAscom: Checking image data...
[02/27/19 21:48:00.516][DEBUG] [Sequence Thread] SaveFileAscom: Create normal preview bitmap...
[02/27/19 21:48:00.522][DEBUG] [Sequence Thread] SaveFileAscom: Locking preview bits...
[02/27/19 21:48:00.522][DEBUG] [Sequence Thread] SaveFileAscom: Validating file name...
[02/27/19 21:48:00.522][DEBUG] [Sequence Thread] SaveFileAscom: Starting byte traversal...
[02/27/19 21:48:00.703][DEBUG] [Sequence Thread] SaveFileAscom: Unlocking preview bits...
[02/27/19 21:48:00.703][DEBUG] [Sequence Thread] SaveFileAscom: Saving preview bitmap to disk...
[02/27/19 21:48:00.703][DEBUG] [Sequence Thread] SaveFileBmp16: Locking bitmap for disk write...
[02/27/19 21:48:00.703][DEBUG] [Sequence Thread] SaveFileBmp16: Opening file stream...
[02/27/19 21:48:00.704][DEBUG] [Sequence Thread] SaveFileBmp16: Writing FITS headers...
[02/27/19 21:48:00.704][DEBUG] [Sequence Thread] SaveFileBmp16: Traversing and persisting bitmap data...
[02/27/19 21:48:00.868][DEBUG] [Sequence Thread] SaveFileBmp16: FITS block fill...
[02/27/19 21:48:00.868][DEBUG] [Sequence Thread] SaveFileBmp16: Unlocking bitmap...
[02/27/19 21:48:00.868][DEBUG] [Sequence Thread] SaveFileBmp16: Closing file stream
[02/27/19 21:48:00.872][DEBUG] [Sequence Thread] SaveFileAscom: Displaying image preview in UI...
[02/27/19 21:48:00.872][DEBUG] [Sequence Thread] Internal Interface: Set Preview...
[02/27/19 21:48:00.872][DEBUG] [Sequence Thread] Display image preview using asynch task...
[02/27/19 21:48:01.212][DEBUG] [Main Thread] --> Find stars (normal)
[02/27/19 21:48:01.303][DEBUG] [Main Thread] AF frame was too large... downsample = 0.5...
[02/27/19 21:48:03.050][DEBUG] [Main Thread] Star detection using min star size of 3px...
[02/27/19 21:48:03.050][DEBUG] [Main Thread] Star detection using max star size of 60px...
[02/27/19 21:48:03.092][DEBUG] [Main Thread] Find stars took: 1880 ms...
[02/27/19 21:48:03.092][DEBUG] [Main Thread] Star list contains 147 stars...
[02/27/19 21:48:03.092][DEBUG] [Main Thread] Calculating HFR with sample size: 6
[02/27/19 21:48:03.852][DEBUG] [Sequence Thread] SaveFileAscom: Done
[02/27/19 21:48:03.852][DEBUG] [Sequence Thread] =========== Save file took 3338 ms
[02/27/19 21:48:03.852][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Image "m81_Light_90sec_1x1__Green_gain_76_2019-02-27_214628_frame11_-15C.fit" saved.  HFR = 2.57.
[02/27/19 21:48:03.852][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Image "m81_Light_90sec_1x1__Green_gain_76_2019-02-27_214628_frame11_-15C.fit" saved.  HFR = 2.57.)...
[02/27/19 21:48:03.856][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:48:03.856][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:4; f:10; o:
[02/27/19 21:48:03.856][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:48:03.856][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:48:03.856][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:48:04.058][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:48:04.058][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:48:04.058][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:4; f:10; o:
[02/27/19 21:48:04.058][DEBUG] [Sequence Thread] EventMarker 18 - t:m81 (1); e:4; f:10; o:
[02/27/19 21:48:04.064][DEBUG] [Sequence Thread] EventMarker 19 - t:m81 (1); e:4; f:11; o:
[02/27/19 21:48:04.064][DEBUG] [Sequence Thread] EventMarker 20 - t:m81 (1); e:4; f:11; o:
[02/27/19 21:48:04.064][DEBUG] [Sequence Thread] Running post event...
[02/27/19 21:48:04.064][DEBUG] [Sequence Thread] EventMarker 21 - t:m81 (1); e:4; f:11; o:
[02/27/19 21:48:04.066][DEBUG] [Sequence Thread] Incremented numComplete (11) for event[4]...
[02/27/19 21:48:04.068][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:48:04.068][DEBUG] [Sequence Thread] Current event[4] frame count: 11/60...
[02/27/19 21:48:04.068][DEBUG] [Sequence Thread] Looking at event[5]...
[02/27/19 21:48:04.068][DEBUG] [Sequence Thread] Looking at event[0]...
[02/27/19 21:48:04.068][DEBUG] [Sequence Thread] Found event event[0] with remaining frames.
[02/27/19 21:48:04.068][DEBUG] [Sequence Thread] Event[0] frame count: 41/120...
[02/27/19 21:48:04.068][DEBUG] [Sequence Thread] Getting next event (0)...
[02/27/19 21:48:04.068][DEBUG] [Sequence Thread] Checking for auto manual focus (post)...
[02/27/19 21:48:04.068][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:48:04.080][DEBUG] [Sequence Thread] Attempting to move to next event...
[02/27/19 21:48:04.080][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:48:04.080][DEBUG] [Sequence Thread] Current event[4] frame count: 11/60...
[02/27/19 21:48:04.080][DEBUG] [Sequence Thread] Looking at event[5]...
[02/27/19 21:48:04.080][DEBUG] [Sequence Thread] Looking at event[0]...
[02/27/19 21:48:04.080][DEBUG] [Sequence Thread] Found event event[0] with remaining frames.
[02/27/19 21:48:04.080][DEBUG] [Sequence Thread] Event[0] frame count: 41/120...
[02/27/19 21:48:04.080][DEBUG] [Sequence Thread] Getting next event (0)...
[02/27/19 21:48:04.080][DEBUG] [Sequence Thread] Running pre event...
[02/27/19 21:48:04.094][DEBUG] [Sequence Thread] Current target has end time at 28/02/2019 06:30:00
[02/27/19 21:48:04.094][DEBUG] [Sequence Thread] End time of next frame is at 27/02/2019 21:48:34
[02/27/19 21:48:04.094][DEBUG] [Sequence Thread] Target is still before end time, continuing...
[02/27/19 21:48:04.094][DEBUG] [Sequence Thread] Running capture event...
[02/27/19 21:48:04.095][DEBUG] [Sequence Thread] ------------- Starting capture frame for event[0] -------------
[02/27/19 21:48:04.106][DEBUG] [Sequence Thread] Sending commands...
[02/27/19 21:48:04.106][DEBUG] [Sequence Thread] SetFlatBox: Frame Type is Light
[02/27/19 21:48:04.106][DEBUG] [Sequence Thread] EventMarker 2 - t:m81 (1); e:0; f:41; o:
[02/27/19 21:48:04.106][DEBUG] [Sequence Thread] Checking if Meridian Flip is needed
[02/27/19 21:48:04.106][DEBUG] [Sequence Thread] Telescope is on the West side of the mount
[02/27/19 21:48:04.106][DEBUG] [Sequence Thread] Meridian Flip not needed, Hour Angle < Degrees Past To Flip: -29.3205411463902 < 0
[02/27/19 21:48:04.106][DEBUG] [Sequence Thread] EventMarker 3 - t:m81 (1); e:0; f:41; o:
[02/27/19 21:48:04.106][DEBUG] [Sequence Thread] EventMarker 4 - t:m81 (1); e:0; f:41; o:
[02/27/19 21:48:04.106][DEBUG] [Sequence Thread] Setting filter position 1...
[02/27/19 21:48:04.115][DEBUG] [Sequence Thread] Setting filter: Lum...
[02/27/19 21:48:04.115][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 1...
[02/27/19 21:48:04.115][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 1 is complete...
[02/27/19 21:48:04.317][DEBUG] [Sequence Thread] Adjust focuser pos per filter: Moving focsuer to focus position (64700)...
[02/27/19 21:48:04.317][DEBUG] [Sequence Thread] Adjust focuser pos per filter
[02/27/19 21:48:04.318][DEBUG] [Sequence Thread] Old filter: Green; Focus pos: 64679
[02/27/19 21:48:04.318][DEBUG] [Sequence Thread] New filter: Lum; Focus pos: 64700
[02/27/19 21:48:04.318][DEBUG] [Sequence Thread] Pos delta: 21 steps
[02/27/19 21:48:04.318][DEBUG] [Sequence Thread] New position-> (current: 4827) + (delta: 21) = 4848
[02/27/19 21:48:04.318][DEBUG] [Sequence Thread] Focuser moving to 4848
[02/27/19 21:48:05.112][DEBUG] [Sequence Thread] Focuser move call complete
[02/27/19 21:48:05.127][DEBUG] [Sequence Thread] Focuser position matches requested position (4848), continuing...
[02/27/19 21:48:05.127][DEBUG] [Sequence Thread] focuser move is complete...
[02/27/19 21:48:05.129][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 2...
[02/27/19 21:48:08.132][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 2 complete...
[02/27/19 21:48:08.144][DEBUG] [Sequence Thread] EventMarker 5 - t:m81 (1); e:0; f:41; o:
[02/27/19 21:48:08.144][DEBUG] [Sequence Thread] Checking for auto manual focus (pre)...
[02/27/19 21:48:08.144][DEBUG] [Sequence Thread] EventMarker 6 - t:m81 (1); e:0; f:41; o:
[02/27/19 21:48:08.190][DEBUG] [Sequence Thread] Autoguider will not dither this frame. Total frames is not a modulus of 5
[02/27/19 21:48:08.190][DEBUG] [Sequence Thread] EventMarker 1 - t:m81 (1); e:0; f:41; o:
[02/27/19 21:48:08.191][DEBUG] [Sequence Thread] Created base name for frame capture: m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_214808_frame42_-15C
[02/27/19 21:48:08.191][DEBUG] [Sequence Thread] Created directory for frame capture: C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\
[02/27/19 21:48:08.191][DEBUG] [Sequence Thread] EventMarker 7 - t:m81 (1); e:0; f:41; o:
[02/27/19 21:48:08.191][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:48:08.191][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:0; f:41; o:
[02/27/19 21:48:08.191][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:48:08.191][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:48:08.191][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:48:08.292][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:48:08.292][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:48:08.292][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:0; f:41; o:
[02/27/19 21:48:08.292][DEBUG] [Sequence Thread] {"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}
[02/27/19 21:48:08.292][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}

[02/27/19 21:48:08.292][DEBUG] [Sequence Thread] EventMarker 172 - t:m81 (1); e:0; f:41; o:
[02/27/19 21:48:08.292][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:48:08.292][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:48:08.292][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:48:08.354][DEBUG] [PHD2 Listener Thread] Unknown object from PHD2: {"Event":"SettleBegin","Timestamp":1551304088.304,"Host":"JGL2_2","Inst":1}
[02/27/19 21:48:08.393][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:48:08.393][DEBUG] [Sequence Thread] EventMarker 173 - t:m81 (1); e:0; f:41; o:
[02/27/19 21:48:08.393][DEBUG] [Sequence Thread] User has elected to skip guider settling over time...
[02/27/19 21:48:08.393][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Attempting to settle the auto guider...
[02/27/19 21:48:08.393][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Attempting to settle the auto guider...)...
[02/27/19 21:48:08.393][DEBUG] [Sequence Thread] Waiting for Auto Guider distance to fall below 0.5
[02/27/19 21:48:08.393][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:48:08.393][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:48:08.398][DEBUG] [Sequence Thread] Distance is below 0.5, starting timer...
[02/27/19 21:48:08.899][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:48:08.899][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:48:08.911][DEBUG] [Sequence Thread] Distance stayed below 0.5 for 0 seconds, done settling...
[02/27/19 21:48:08.912][DEBUG] [Sequence Thread] Auto guider has settled...
[02/27/19 21:48:08.912][DEBUG] [Sequence Thread] EventMarker 8 - t:m81 (1); e:0; f:41; o:
[02/27/19 21:48:08.912][DEBUG] [Sequence Thread] EventMarker 9 - t:m81 (1); e:0; f:41; o:
[02/27/19 21:48:08.912][DEBUG] [Sequence Thread] EventMarker 10 - t:m81 (1); e:0; f:41; o:
[02/27/19 21:48:08.912][DEBUG] [Sequence Thread] Finished sending frame capture.  Entering wait mode...
[02/27/19 21:48:08.912][DEBUG] [Sequence Thread] EventMarker 11 - t:m81 (1); e:0; f:41; o:
[02/27/19 21:48:08.913][DEBUG] [Sequence Thread] EventMarker 12 - t:m81 (1); e:0; f:41; o:
[02/27/19 21:48:08.920][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Starting integration of m81; Event 1; Frame 42 for 30s...
[02/27/19 21:48:08.920][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Starting integration of m81; Event 1; Frame 42 for 30s...)...
[02/27/19 21:48:08.920][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, TimedError): (2019-02-25) Failure while integrating m81; Event 1; Frame 42 for 30s. Image has not downloaded in alloted time period.
[02/27/19 21:48:08.920][DEBUG] [Sequence Thread] GNS: Sent timed event to GNS...
[02/27/19 21:48:08.921][DEBUG] [Sequence Thread] EventMarker 13 - t:m81 (1); e:0; f:41; o:
[02/27/19 21:48:08.922][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE message received...
[02/27/19 21:48:08.923][DEBUG] [Camera Thread] SetAscomGain to 76
[02/27/19 21:48:08.926][DEBUG] [Camera Thread] Camera gain set to 76
[02/27/19 21:48:08.926][DEBUG] [Camera Thread] SetAscomNormalSpeed... 
[02/27/19 21:48:08.926][DEBUG] [Camera Thread] Cannot set readout speed, not supported by camera...
[02/27/19 21:48:09.970][DEBUG] [PHD2 Listener Thread] PHD2: Settle done received: GOOD
[02/27/19 21:48:39.033][DEBUG] [Sequence Thread] EventMarker 15 - t:m81 (1); e:0; f:41; o:
[02/27/19 21:48:39.042][DEBUG] [Sequence Thread] Waking from exposure time sleep period...
[02/27/19 21:48:39.043][DEBUG] [Sequence Thread] Checking to see if the CCD has a temp...
[02/27/19 21:48:39.043][DEBUG] [Sequence Thread] Saving the CCD temp...
[02/27/19 21:48:39.051][DEBUG] [Sequence Thread] Entering super dangerous loop to await image completion...
[02/27/19 21:48:39.054][DEBUG] [Sequence Thread] EventMarker 16 - t:m81 (1); e:0; f:41; o:
[02/27/19 21:48:40.067][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE complete...
[02/27/19 21:48:40.567][DEBUG] [Sequence Thread] EventMarker 17 - t:m81 (1); e:0; f:41; o:
[02/27/19 21:48:40.567][DEBUG] [Sequence Thread] Image reported as complete.  Continuing...
[02/27/19 21:48:40.567][DEBUG] [Sequence Thread] Collecting FITs headers...
[02/27/19 21:48:40.568][DEBUG] [Sequence Thread] ASCOM Camera: Could not get last exposure start time.  Reported as (unknown)
[02/27/19 21:48:40.568][DEBUG] [Sequence Thread] DATE-LOC time provided by SGPro (failed to retrieve valid entry from camera)...
[02/27/19 21:48:40.570][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info for last solve...
[02/27/19 21:48:40.570][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info from UI...
[02/27/19 21:48:40.570][DEBUG] [Sequence Thread] Clearing timed monitoring events...
[02/27/19 21:48:40.575][DEBUG] [Sequence Thread] Created full file name (file does not exist): C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_214808_frame42_-15C.fit
[02/27/19 21:48:40.575][DEBUG] [Sequence Thread] SaveFileAscom: Start...
[02/27/19 21:48:40.575][DEBUG] [Sequence Thread] SaveFileAscom: Checking image data...
[02/27/19 21:48:40.575][DEBUG] [Sequence Thread] SaveFileAscom: Create normal preview bitmap...
[02/27/19 21:48:40.581][DEBUG] [Sequence Thread] SaveFileAscom: Locking preview bits...
[02/27/19 21:48:40.581][DEBUG] [Sequence Thread] SaveFileAscom: Validating file name...
[02/27/19 21:48:40.581][DEBUG] [Sequence Thread] SaveFileAscom: Starting byte traversal...
[02/27/19 21:48:40.761][DEBUG] [Sequence Thread] SaveFileAscom: Unlocking preview bits...
[02/27/19 21:48:40.762][DEBUG] [Sequence Thread] SaveFileAscom: Saving preview bitmap to disk...
[02/27/19 21:48:40.762][DEBUG] [Sequence Thread] SaveFileBmp16: Locking bitmap for disk write...
[02/27/19 21:48:40.762][DEBUG] [Sequence Thread] SaveFileBmp16: Opening file stream...
[02/27/19 21:48:40.771][DEBUG] [Sequence Thread] SaveFileBmp16: Writing FITS headers...
[02/27/19 21:48:40.771][DEBUG] [Sequence Thread] SaveFileBmp16: Traversing and persisting bitmap data...
[02/27/19 21:48:40.938][DEBUG] [Sequence Thread] SaveFileBmp16: FITS block fill...
[02/27/19 21:48:40.938][DEBUG] [Sequence Thread] SaveFileBmp16: Unlocking bitmap...
[02/27/19 21:48:40.938][DEBUG] [Sequence Thread] SaveFileBmp16: Closing file stream
[02/27/19 21:48:40.941][DEBUG] [Sequence Thread] SaveFileAscom: Displaying image preview in UI...
[02/27/19 21:48:40.941][DEBUG] [Sequence Thread] Internal Interface: Set Preview...
[02/27/19 21:48:40.941][DEBUG] [Sequence Thread] Display image preview using asynch task...
[02/27/19 21:48:41.224][DEBUG] [Main Thread] --> Find stars (normal)
[02/27/19 21:48:41.295][DEBUG] [Main Thread] AF frame was too large... downsample = 0.5...
[02/27/19 21:48:42.971][DEBUG] [Main Thread] Star detection using min star size of 3px...
[02/27/19 21:48:42.971][DEBUG] [Main Thread] Star detection using max star size of 60px...
[02/27/19 21:48:43.016][DEBUG] [Main Thread] Find stars took: 1791 ms...
[02/27/19 21:48:43.016][DEBUG] [Main Thread] Star list contains 155 stars...
[02/27/19 21:48:43.016][DEBUG] [Main Thread] Calculating HFR with sample size: 6
[02/27/19 21:48:44.031][DEBUG] [Sequence Thread] SaveFileAscom: Done
[02/27/19 21:48:44.031][DEBUG] [Sequence Thread] =========== Save file took 3460 ms
[02/27/19 21:48:44.031][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_214808_frame42_-15C.fit" saved.  HFR = 2.66.
[02/27/19 21:48:44.031][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_214808_frame42_-15C.fit" saved.  HFR = 2.66.)...
[02/27/19 21:48:44.036][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:48:44.036][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:0; f:41; o:
[02/27/19 21:48:44.036][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:48:44.036][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:48:44.036][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:48:44.137][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:48:44.137][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:48:44.137][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:0; f:41; o:
[02/27/19 21:48:44.143][DEBUG] [Sequence Thread] EventMarker 18 - t:m81 (1); e:0; f:41; o:
[02/27/19 21:48:44.159][DEBUG] [Sequence Thread] EventMarker 19 - t:m81 (1); e:0; f:42; o:
[02/27/19 21:48:44.159][DEBUG] [Sequence Thread] EventMarker 20 - t:m81 (1); e:0; f:42; o:
[02/27/19 21:48:44.159][DEBUG] [Sequence Thread] Running post event...
[02/27/19 21:48:44.159][DEBUG] [Sequence Thread] EventMarker 21 - t:m81 (1); e:0; f:42; o:
[02/27/19 21:48:44.162][DEBUG] [Sequence Thread] Incremented numComplete (42) for event[0]...
[02/27/19 21:48:44.170][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:48:44.170][DEBUG] [Sequence Thread] Current event[0] frame count: 42/120...
[02/27/19 21:48:44.170][DEBUG] [Sequence Thread] Looking at event[1]...
[02/27/19 21:48:44.170][DEBUG] [Sequence Thread] Found event event[1] with remaining frames.
[02/27/19 21:48:44.170][DEBUG] [Sequence Thread] Event[1] frame count: 10/120...
[02/27/19 21:48:44.170][DEBUG] [Sequence Thread] Getting next event (1)...
[02/27/19 21:48:44.170][DEBUG] [Sequence Thread] Checking for auto manual focus (post)...
[02/27/19 21:48:44.170][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:48:44.182][DEBUG] [Sequence Thread] Attempting to move to next event...
[02/27/19 21:48:44.182][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:48:44.182][DEBUG] [Sequence Thread] Current event[0] frame count: 42/120...
[02/27/19 21:48:44.182][DEBUG] [Sequence Thread] Looking at event[1]...
[02/27/19 21:48:44.182][DEBUG] [Sequence Thread] Found event event[1] with remaining frames.
[02/27/19 21:48:44.182][DEBUG] [Sequence Thread] Event[1] frame count: 10/120...
[02/27/19 21:48:44.182][DEBUG] [Sequence Thread] Getting next event (1)...
[02/27/19 21:48:44.182][DEBUG] [Sequence Thread] Running pre event...
[02/27/19 21:48:44.194][DEBUG] [Sequence Thread] Current target has end time at 28/02/2019 06:30:00
[02/27/19 21:48:44.194][DEBUG] [Sequence Thread] End time of next frame is at 27/02/2019 21:49:14
[02/27/19 21:48:44.194][DEBUG] [Sequence Thread] Target is still before end time, continuing...
[02/27/19 21:48:44.194][DEBUG] [Sequence Thread] Running capture event...
[02/27/19 21:48:44.200][DEBUG] [Sequence Thread] ------------- Starting capture frame for event[1] -------------
[02/27/19 21:48:44.214][DEBUG] [Sequence Thread] Sending commands...
[02/27/19 21:48:44.214][DEBUG] [Sequence Thread] SetFlatBox: Frame Type is Light
[02/27/19 21:48:44.214][DEBUG] [Sequence Thread] EventMarker 2 - t:m81 (1); e:1; f:10; o:
[02/27/19 21:48:44.214][DEBUG] [Sequence Thread] Checking if Meridian Flip is needed
[02/27/19 21:48:44.214][DEBUG] [Sequence Thread] Telescope is on the West side of the mount
[02/27/19 21:48:44.214][DEBUG] [Sequence Thread] Meridian Flip not needed, Hour Angle < Degrees Past To Flip: -29.1491985045832 < 0
[02/27/19 21:48:44.214][DEBUG] [Sequence Thread] EventMarker 3 - t:m81 (1); e:1; f:10; o:
[02/27/19 21:48:44.214][DEBUG] [Sequence Thread] EventMarker 4 - t:m81 (1); e:1; f:10; o:
[02/27/19 21:48:44.214][DEBUG] [Sequence Thread] Setting filter position 1...
[02/27/19 21:48:44.214][DEBUG] [Sequence Thread] Filter position 1 is already set.  Skipping...
[02/27/19 21:48:44.214][DEBUG] [Sequence Thread] EventMarker 5 - t:m81 (1); e:1; f:10; o:
[02/27/19 21:48:44.214][DEBUG] [Sequence Thread] Checking for auto manual focus (pre)...
[02/27/19 21:48:44.214][DEBUG] [Sequence Thread] EventMarker 6 - t:m81 (1); e:1; f:10; o:
[02/27/19 21:48:44.228][DEBUG] [Sequence Thread] Running dither...
[02/27/19 21:48:44.238][DEBUG] [Sequence Thread] PHD2 dither request: 1...
[02/27/19 21:48:44.238][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:48:44.238][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:48:44.238][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:48:44.338][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:48:45.339][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:48:45.339][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:48:45.339][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:48:45.440][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:48:46.441][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:48:46.441][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:48:46.441][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:48:46.541][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:48:47.542][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:48:47.542][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:48:47.542][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:48:47.642][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:48:48.642][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:48:48.642][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:48:48.642][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:48:48.742][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:48:48.742][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:48:48.742][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:48:48.742][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:48:48.943][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:48:48.943][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "dither", "params": [1, false, {"pixels": 0.5, "time": 0, "timeout": 600}], "id": 1002}

[02/27/19 21:48:48.945][DEBUG] [Sequence Thread] EventMarker 1 - t:m81 (1); e:1; f:10; o:
[02/27/19 21:48:48.947][DEBUG] [Sequence Thread] Created base name for frame capture: m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_214848_frame11_-15C
[02/27/19 21:48:48.947][DEBUG] [Sequence Thread] Created directory for frame capture: C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\
[02/27/19 21:48:48.947][DEBUG] [Sequence Thread] EventMarker 7 - t:m81 (1); e:1; f:10; o:
[02/27/19 21:48:48.947][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:48:48.947][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:1; f:10; o:
[02/27/19 21:48:48.947][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:48:48.948][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:48:48.948][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:48:49.045][DEBUG] [PHD2 Listener Thread] Unknown object from PHD2: {"Event":"SettleBegin","Timestamp":1551304128.999,"Host":"JGL2_2","Inst":1}
[02/27/19 21:48:49.048][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:48:49.048][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:48:49.048][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:1; f:10; o:
[02/27/19 21:48:49.050][DEBUG] [Sequence Thread] {"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}
[02/27/19 21:48:49.050][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}

[02/27/19 21:48:49.050][DEBUG] [Sequence Thread] EventMarker 172 - t:m81 (1); e:1; f:10; o:
[02/27/19 21:48:49.050][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:48:49.050][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:48:49.050][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:48:49.147][DEBUG] [PHD2 Listener Thread] Error received from RPC: Cannot initiate guide while dither is in progress
[02/27/19 21:48:49.150][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:48:49.150][DEBUG] [Sequence Thread] EventMarker 173 - t:m81 (1); e:1; f:10; o:
[02/27/19 21:48:49.151][DEBUG] [Sequence Thread] User has elected to skip guider settling over time...
[02/27/19 21:48:49.151][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Attempting to settle the auto guider...
[02/27/19 21:48:49.151][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Attempting to settle the auto guider...)...
[02/27/19 21:48:49.151][DEBUG] [Sequence Thread] Waiting for Auto Guider distance to fall below 0.5
[02/27/19 21:48:49.151][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:48:49.151][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:48:49.164][DEBUG] [Sequence Thread] Distance is below 0.5, starting timer...
[02/27/19 21:48:49.664][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:48:49.664][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:48:49.673][DEBUG] [Sequence Thread] Distance stayed below 0.5 for 0 seconds, done settling...
[02/27/19 21:48:49.673][DEBUG] [Sequence Thread] Auto guider has settled...
[02/27/19 21:48:49.674][DEBUG] [Sequence Thread] EventMarker 8 - t:m81 (1); e:1; f:10; o:
[02/27/19 21:48:49.674][DEBUG] [Sequence Thread] EventMarker 9 - t:m81 (1); e:1; f:10; o:
[02/27/19 21:48:49.674][DEBUG] [Sequence Thread] EventMarker 10 - t:m81 (1); e:1; f:10; o:
[02/27/19 21:48:49.674][DEBUG] [Sequence Thread] Finished sending frame capture.  Entering wait mode...
[02/27/19 21:48:49.674][DEBUG] [Sequence Thread] EventMarker 11 - t:m81 (1); e:1; f:10; o:
[02/27/19 21:48:49.674][DEBUG] [Sequence Thread] EventMarker 12 - t:m81 (1); e:1; f:10; o:
[02/27/19 21:48:49.680][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE message received...
[02/27/19 21:48:49.680][DEBUG] [Camera Thread] SetAscomGain to 76
[02/27/19 21:48:49.682][DEBUG] [Camera Thread] Camera gain set to 76
[02/27/19 21:48:49.682][DEBUG] [Camera Thread] SetAscomNormalSpeed... 
[02/27/19 21:48:49.682][DEBUG] [Camera Thread] Cannot set readout speed, not supported by camera...
[02/27/19 21:48:50.130][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Starting integration of m81; Event 2; Frame 11 for 30s...
[02/27/19 21:48:50.130][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Starting integration of m81; Event 2; Frame 11 for 30s...)...
[02/27/19 21:48:50.131][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, TimedError): (2019-02-25) Failure while integrating m81; Event 2; Frame 11 for 30s. Image has not downloaded in alloted time period.
[02/27/19 21:48:50.131][DEBUG] [Sequence Thread] GNS: Sent timed event to GNS...
[02/27/19 21:48:50.134][DEBUG] [Sequence Thread] EventMarker 13 - t:m81 (1); e:1; f:10; o:
[02/27/19 21:48:51.977][DEBUG] [PHD2 Listener Thread] PHD2: Settle done received: GOOD
[02/27/19 21:48:56.437][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:48:56.452][DEBUG] [MF Update Thread] Performing serialize...
[02/27/19 21:49:19.926][DEBUG] [Sequence Thread] EventMarker 15 - t:m81 (1); e:1; f:10; o:
[02/27/19 21:49:19.929][DEBUG] [Sequence Thread] Waking from exposure time sleep period...
[02/27/19 21:49:19.930][DEBUG] [Sequence Thread] Checking to see if the CCD has a temp...
[02/27/19 21:49:19.930][DEBUG] [Sequence Thread] Saving the CCD temp...
[02/27/19 21:49:19.934][DEBUG] [Sequence Thread] Entering super dangerous loop to await image completion...
[02/27/19 21:49:19.941][DEBUG] [Sequence Thread] EventMarker 16 - t:m81 (1); e:1; f:10; o:
[02/27/19 21:49:20.804][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE complete...
[02/27/19 21:49:21.035][DEBUG] [Sequence Thread] EventMarker 17 - t:m81 (1); e:1; f:10; o:
[02/27/19 21:49:21.035][DEBUG] [Sequence Thread] Image reported as complete.  Continuing...
[02/27/19 21:49:21.035][DEBUG] [Sequence Thread] Collecting FITs headers...
[02/27/19 21:49:21.036][DEBUG] [Sequence Thread] ASCOM Camera: Could not get last exposure start time.  Reported as (unknown)
[02/27/19 21:49:21.036][DEBUG] [Sequence Thread] DATE-LOC time provided by SGPro (failed to retrieve valid entry from camera)...
[02/27/19 21:49:21.037][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info for last solve...
[02/27/19 21:49:21.037][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info from UI...
[02/27/19 21:49:21.038][DEBUG] [Sequence Thread] Clearing timed monitoring events...
[02/27/19 21:49:21.043][DEBUG] [Sequence Thread] Created full file name (file does not exist): C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_214848_frame11_-15C.fit
[02/27/19 21:49:21.043][DEBUG] [Sequence Thread] SaveFileAscom: Start...
[02/27/19 21:49:21.043][DEBUG] [Sequence Thread] SaveFileAscom: Checking image data...
[02/27/19 21:49:21.043][DEBUG] [Sequence Thread] SaveFileAscom: Create normal preview bitmap...
[02/27/19 21:49:21.050][DEBUG] [Sequence Thread] SaveFileAscom: Locking preview bits...
[02/27/19 21:49:21.050][DEBUG] [Sequence Thread] SaveFileAscom: Validating file name...
[02/27/19 21:49:21.050][DEBUG] [Sequence Thread] SaveFileAscom: Starting byte traversal...
[02/27/19 21:49:21.241][DEBUG] [Sequence Thread] SaveFileAscom: Unlocking preview bits...
[02/27/19 21:49:21.241][DEBUG] [Sequence Thread] SaveFileAscom: Saving preview bitmap to disk...
[02/27/19 21:49:21.241][DEBUG] [Sequence Thread] SaveFileBmp16: Locking bitmap for disk write...
[02/27/19 21:49:21.241][DEBUG] [Sequence Thread] SaveFileBmp16: Opening file stream...
[02/27/19 21:49:21.241][DEBUG] [Sequence Thread] SaveFileBmp16: Writing FITS headers...
[02/27/19 21:49:21.241][DEBUG] [Sequence Thread] SaveFileBmp16: Traversing and persisting bitmap data...
[02/27/19 21:49:21.396][DEBUG] [Sequence Thread] SaveFileBmp16: FITS block fill...
[02/27/19 21:49:21.396][DEBUG] [Sequence Thread] SaveFileBmp16: Unlocking bitmap...
[02/27/19 21:49:21.396][DEBUG] [Sequence Thread] SaveFileBmp16: Closing file stream
[02/27/19 21:49:21.399][DEBUG] [Sequence Thread] SaveFileAscom: Displaying image preview in UI...
[02/27/19 21:49:21.400][DEBUG] [Sequence Thread] Internal Interface: Set Preview...
[02/27/19 21:49:21.400][DEBUG] [Sequence Thread] Display image preview using asynch task...
[02/27/19 21:49:21.673][DEBUG] [Main Thread] --> Find stars (normal)
[02/27/19 21:49:21.736][DEBUG] [Main Thread] AF frame was too large... downsample = 0.5...
[02/27/19 21:49:23.413][DEBUG] [Main Thread] Star detection using min star size of 3px...
[02/27/19 21:49:23.413][DEBUG] [Main Thread] Star detection using max star size of 60px...
[02/27/19 21:49:23.457][DEBUG] [Main Thread] Find stars took: 1784 ms...
[02/27/19 21:49:23.457][DEBUG] [Main Thread] Star list contains 154 stars...
[02/27/19 21:49:23.457][DEBUG] [Main Thread] Calculating HFR with sample size: 6
[02/27/19 21:49:24.139][DEBUG] [Sequence Thread] SaveFileAscom: Done
[02/27/19 21:49:24.139][DEBUG] [Sequence Thread] =========== Save file took 3100 ms
[02/27/19 21:49:24.139][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_214848_frame11_-15C.fit" saved.  HFR = 2.80.
[02/27/19 21:49:24.139][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Image "m81_Light_30sec_1x1__Lum_gain_76_2019-02-27_214848_frame11_-15C.fit" saved.  HFR = 2.80.)...
[02/27/19 21:49:24.143][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:49:24.143][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:1; f:10; o:
[02/27/19 21:49:24.143][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:49:24.143][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:49:24.143][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:49:24.243][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:49:24.243][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:49:24.243][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:1; f:10; o:
[02/27/19 21:49:24.255][DEBUG] [Sequence Thread] EventMarker 18 - t:m81 (1); e:1; f:10; o:
[02/27/19 21:49:24.262][DEBUG] [Sequence Thread] EventMarker 19 - t:m81 (1); e:1; f:11; o:
[02/27/19 21:49:24.262][DEBUG] [Sequence Thread] EventMarker 20 - t:m81 (1); e:1; f:11; o:
[02/27/19 21:49:24.262][DEBUG] [Sequence Thread] Running post event...
[02/27/19 21:49:24.262][DEBUG] [Sequence Thread] EventMarker 21 - t:m81 (1); e:1; f:11; o:
[02/27/19 21:49:24.269][DEBUG] [Sequence Thread] Incremented numComplete (11) for event[1]...
[02/27/19 21:49:24.291][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:49:24.291][DEBUG] [Sequence Thread] Current event[1] frame count: 11/120...
[02/27/19 21:49:24.291][DEBUG] [Sequence Thread] Looking at event[2]...
[02/27/19 21:49:24.291][DEBUG] [Sequence Thread] Found event event[2] with remaining frames.
[02/27/19 21:49:24.291][DEBUG] [Sequence Thread] Event[2] frame count: 11/60...
[02/27/19 21:49:24.291][DEBUG] [Sequence Thread] Getting next event (2)...
[02/27/19 21:49:24.291][DEBUG] [Sequence Thread] Checking for auto manual focus (post)...
[02/27/19 21:49:24.292][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:49:24.309][DEBUG] [Sequence Thread] Attempting to move to next event...
[02/27/19 21:49:24.309][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:49:24.309][DEBUG] [Sequence Thread] Current event[1] frame count: 11/120...
[02/27/19 21:49:24.309][DEBUG] [Sequence Thread] Looking at event[2]...
[02/27/19 21:49:24.309][DEBUG] [Sequence Thread] Found event event[2] with remaining frames.
[02/27/19 21:49:24.309][DEBUG] [Sequence Thread] Event[2] frame count: 11/60...
[02/27/19 21:49:24.309][DEBUG] [Sequence Thread] Getting next event (2)...
[02/27/19 21:49:24.309][DEBUG] [Sequence Thread] Running pre event...
[02/27/19 21:49:24.372][DEBUG] [Sequence Thread] Current target has end time at 28/02/2019 06:30:00
[02/27/19 21:49:24.372][DEBUG] [Sequence Thread] End time of next frame is at 27/02/2019 21:50:54
[02/27/19 21:49:24.372][DEBUG] [Sequence Thread] Target is still before end time, continuing...
[02/27/19 21:49:24.372][DEBUG] [Sequence Thread] Running capture event...
[02/27/19 21:49:24.374][DEBUG] [Sequence Thread] ------------- Starting capture frame for event[2] -------------
[02/27/19 21:49:24.388][DEBUG] [Sequence Thread] Sending commands...
[02/27/19 21:49:24.388][DEBUG] [Sequence Thread] SetFlatBox: Frame Type is Light
[02/27/19 21:49:24.388][DEBUG] [Sequence Thread] EventMarker 2 - t:m81 (1); e:2; f:11; o:
[02/27/19 21:49:24.388][DEBUG] [Sequence Thread] Checking if Meridian Flip is needed
[02/27/19 21:49:24.388][DEBUG] [Sequence Thread] Telescope is on the West side of the mount
[02/27/19 21:49:24.388][DEBUG] [Sequence Thread] Meridian Flip not needed, Hour Angle < Degrees Past To Flip: -28.9792004136417 < 0
[02/27/19 21:49:24.388][DEBUG] [Sequence Thread] EventMarker 3 - t:m81 (1); e:2; f:11; o:
[02/27/19 21:49:24.388][DEBUG] [Sequence Thread] EventMarker 4 - t:m81 (1); e:2; f:11; o:
[02/27/19 21:49:24.388][DEBUG] [Sequence Thread] Setting filter position 4...
[02/27/19 21:49:24.395][DEBUG] [Sequence Thread] Setting filter: Blue...
[02/27/19 21:49:24.395][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 1...
[02/27/19 21:49:24.395][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 1 is complete...
[02/27/19 21:49:24.597][DEBUG] [Sequence Thread] Adjust focuser pos per filter: Moving focsuer to focus position (64704)...
[02/27/19 21:49:24.597][DEBUG] [Sequence Thread] Adjust focuser pos per filter
[02/27/19 21:49:24.597][DEBUG] [Sequence Thread] Old filter: Lum; Focus pos: 64700
[02/27/19 21:49:24.597][DEBUG] [Sequence Thread] New filter: Blue; Focus pos: 64704
[02/27/19 21:49:24.597][DEBUG] [Sequence Thread] Pos delta: 4 steps
[02/27/19 21:49:24.597][DEBUG] [Sequence Thread] New position-> (current: 4848) + (delta: 4) = 4852
[02/27/19 21:49:24.597][DEBUG] [Sequence Thread] Focuser moving to 4852
[02/27/19 21:49:25.239][DEBUG] [Sequence Thread] Focuser move call complete
[02/27/19 21:49:25.287][DEBUG] [Sequence Thread] Focuser position matches requested position (4852), continuing...
[02/27/19 21:49:25.287][DEBUG] [Sequence Thread] focuser move is complete...
[02/27/19 21:49:25.289][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 2...
[02/27/19 21:49:27.290][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 2 complete...
[02/27/19 21:49:27.299][DEBUG] [Sequence Thread] EventMarker 5 - t:m81 (1); e:2; f:11; o:
[02/27/19 21:49:27.299][DEBUG] [Sequence Thread] Checking for auto manual focus (pre)...
[02/27/19 21:49:27.299][DEBUG] [Sequence Thread] EventMarker 6 - t:m81 (1); e:2; f:11; o:
[02/27/19 21:49:27.308][DEBUG] [Sequence Thread] Autoguider will not dither this frame. Total frames is not a modulus of 5
[02/27/19 21:49:27.308][DEBUG] [Sequence Thread] EventMarker 1 - t:m81 (1); e:2; f:11; o:
[02/27/19 21:49:27.309][DEBUG] [Sequence Thread] Created base name for frame capture: m81_Light_90sec_1x1__Blue_gain_76_2019-02-27_214927_frame12_-15C
[02/27/19 21:49:27.309][DEBUG] [Sequence Thread] Created directory for frame capture: C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\
[02/27/19 21:49:27.309][DEBUG] [Sequence Thread] EventMarker 7 - t:m81 (1); e:2; f:11; o:
[02/27/19 21:49:27.309][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:49:27.309][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:2; f:11; o:
[02/27/19 21:49:27.309][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:49:27.309][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:49:27.309][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:49:27.409][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:49:27.409][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:49:27.409][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:2; f:11; o:
[02/27/19 21:49:27.413][DEBUG] [Sequence Thread] {"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}
[02/27/19 21:49:27.413][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}

[02/27/19 21:49:27.413][DEBUG] [Sequence Thread] EventMarker 172 - t:m81 (1); e:2; f:11; o:
[02/27/19 21:49:27.413][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:49:27.413][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:49:27.413][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:49:27.467][DEBUG] [PHD2 Listener Thread] Unknown object from PHD2: {"Event":"SettleBegin","Timestamp":1551304167.418,"Host":"JGL2_2","Inst":1}
[02/27/19 21:49:27.514][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:49:27.514][DEBUG] [Sequence Thread] EventMarker 173 - t:m81 (1); e:2; f:11; o:
[02/27/19 21:49:27.514][DEBUG] [Sequence Thread] User has elected to skip guider settling over time...
[02/27/19 21:49:27.514][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Attempting to settle the auto guider...
[02/27/19 21:49:27.514][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Attempting to settle the auto guider...)...
[02/27/19 21:49:27.514][DEBUG] [Sequence Thread] Waiting for Auto Guider distance to fall below 0.5
[02/27/19 21:49:27.514][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:49:27.514][DEBUG] [Sequence Thread] PHD2 distance request returned 0.2...
[02/27/19 21:49:27.524][DEBUG] [Sequence Thread] Distance is below 0.5, starting timer...
[02/27/19 21:49:27.972][DEBUG] [PHD2 Listener Thread] PHD2: Settle done received: GOOD
[02/27/19 21:49:28.024][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:49:28.024][DEBUG] [Sequence Thread] PHD2 distance request returned 0.2...
[02/27/19 21:49:28.030][DEBUG] [Sequence Thread] Distance stayed below 0.5 for 0 seconds, done settling...
[02/27/19 21:49:28.031][DEBUG] [Sequence Thread] Auto guider has settled...
[02/27/19 21:49:28.031][DEBUG] [Sequence Thread] EventMarker 8 - t:m81 (1); e:2; f:11; o:
[02/27/19 21:49:28.031][DEBUG] [Sequence Thread] EventMarker 9 - t:m81 (1); e:2; f:11; o:
[02/27/19 21:49:28.031][DEBUG] [Sequence Thread] EventMarker 10 - t:m81 (1); e:2; f:11; o:
[02/27/19 21:49:28.031][DEBUG] [Sequence Thread] Finished sending frame capture.  Entering wait mode...
[02/27/19 21:49:28.031][DEBUG] [Sequence Thread] EventMarker 11 - t:m81 (1); e:2; f:11; o:
[02/27/19 21:49:28.032][DEBUG] [Sequence Thread] EventMarker 12 - t:m81 (1); e:2; f:11; o:
[02/27/19 21:49:28.036][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE message received...
[02/27/19 21:49:28.036][DEBUG] [Camera Thread] SetAscomGain to 76
[02/27/19 21:49:28.037][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Starting integration of m81; Event 3; Frame 12 for 90s...
[02/27/19 21:49:28.037][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Starting integration of m81; Event 3; Frame 12 for 90s...)...
[02/27/19 21:49:28.037][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, TimedError): (2019-02-25) Failure while integrating m81; Event 3; Frame 12 for 90s. Image has not downloaded in alloted time period.
[02/27/19 21:49:28.037][DEBUG] [Sequence Thread] GNS: Sent timed event to GNS...
[02/27/19 21:49:28.037][DEBUG] [Camera Thread] Camera gain set to 76
[02/27/19 21:49:28.037][DEBUG] [Camera Thread] SetAscomNormalSpeed... 
[02/27/19 21:49:28.037][DEBUG] [Camera Thread] Cannot set readout speed, not supported by camera...
[02/27/19 21:49:28.038][DEBUG] [Sequence Thread] EventMarker 13 - t:m81 (1); e:2; f:11; o:
[02/27/19 21:50:21.531][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:50:21.548][DEBUG] [MF Update Thread] Performing serialize...
[02/27/19 21:50:58.061][DEBUG] [Sequence Thread] EventMarker 15 - t:m81 (1); e:2; f:11; o:
[02/27/19 21:50:58.066][DEBUG] [Sequence Thread] Waking from exposure time sleep period...
[02/27/19 21:50:58.066][DEBUG] [Sequence Thread] Checking to see if the CCD has a temp...
[02/27/19 21:50:58.066][DEBUG] [Sequence Thread] Saving the CCD temp...
[02/27/19 21:50:58.552][DEBUG] [Sequence Thread] Entering super dangerous loop to await image completion...
[02/27/19 21:50:58.556][DEBUG] [Sequence Thread] EventMarker 16 - t:m81 (1); e:2; f:11; o:
[02/27/19 21:50:59.282][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE complete...
[02/27/19 21:50:59.560][DEBUG] [Sequence Thread] EventMarker 17 - t:m81 (1); e:2; f:11; o:
[02/27/19 21:50:59.560][DEBUG] [Sequence Thread] Image reported as complete.  Continuing...
[02/27/19 21:50:59.561][DEBUG] [Sequence Thread] Collecting FITs headers...
[02/27/19 21:50:59.562][DEBUG] [Sequence Thread] ASCOM Camera: Could not get last exposure start time.  Reported as (unknown)
[02/27/19 21:50:59.562][DEBUG] [Sequence Thread] DATE-LOC time provided by SGPro (failed to retrieve valid entry from camera)...
[02/27/19 21:50:59.563][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info for last solve...
[02/27/19 21:50:59.564][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info from UI...
[02/27/19 21:50:59.564][DEBUG] [Sequence Thread] Clearing timed monitoring events...
[02/27/19 21:50:59.570][DEBUG] [Sequence Thread] Created full file name (file does not exist): C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\m81_Light_90sec_1x1__Blue_gain_76_2019-02-27_214927_frame12_-15C.fit
[02/27/19 21:50:59.570][DEBUG] [Sequence Thread] SaveFileAscom: Start...
[02/27/19 21:50:59.570][DEBUG] [Sequence Thread] SaveFileAscom: Checking image data...
[02/27/19 21:50:59.570][DEBUG] [Sequence Thread] SaveFileAscom: Create normal preview bitmap...
[02/27/19 21:50:59.576][DEBUG] [Sequence Thread] SaveFileAscom: Locking preview bits...
[02/27/19 21:50:59.576][DEBUG] [Sequence Thread] SaveFileAscom: Validating file name...
[02/27/19 21:50:59.576][DEBUG] [Sequence Thread] SaveFileAscom: Starting byte traversal...
[02/27/19 21:50:59.764][DEBUG] [Sequence Thread] SaveFileAscom: Unlocking preview bits...
[02/27/19 21:50:59.764][DEBUG] [Sequence Thread] SaveFileAscom: Saving preview bitmap to disk...
[02/27/19 21:50:59.764][DEBUG] [Sequence Thread] SaveFileBmp16: Locking bitmap for disk write...
[02/27/19 21:50:59.764][DEBUG] [Sequence Thread] SaveFileBmp16: Opening file stream...
[02/27/19 21:50:59.764][DEBUG] [Sequence Thread] SaveFileBmp16: Writing FITS headers...
[02/27/19 21:50:59.765][DEBUG] [Sequence Thread] SaveFileBmp16: Traversing and persisting bitmap data...
[02/27/19 21:50:59.957][DEBUG] [Sequence Thread] SaveFileBmp16: FITS block fill...
[02/27/19 21:50:59.957][DEBUG] [Sequence Thread] SaveFileBmp16: Unlocking bitmap...
[02/27/19 21:50:59.957][DEBUG] [Sequence Thread] SaveFileBmp16: Closing file stream
[02/27/19 21:50:59.962][DEBUG] [Sequence Thread] SaveFileAscom: Displaying image preview in UI...
[02/27/19 21:50:59.962][DEBUG] [Sequence Thread] Internal Interface: Set Preview...
[02/27/19 21:50:59.962][DEBUG] [Sequence Thread] Display image preview using asynch task...
[02/27/19 21:51:00.651][DEBUG] [Main Thread] --> Find stars (normal)
[02/27/19 21:51:00.722][DEBUG] [Main Thread] AF frame was too large... downsample = 0.5...
[02/27/19 21:51:02.378][DEBUG] [Main Thread] Star detection using min star size of 3px...
[02/27/19 21:51:02.378][DEBUG] [Main Thread] Star detection using max star size of 60px...
[02/27/19 21:51:02.421][DEBUG] [Main Thread] Find stars took: 1769 ms...
[02/27/19 21:51:02.421][DEBUG] [Main Thread] Star list contains 168 stars...
[02/27/19 21:51:02.421][DEBUG] [Main Thread] Calculating HFR with sample size: 6
[02/27/19 21:51:02.966][DEBUG] [Sequence Thread] SaveFileAscom: Done
[02/27/19 21:51:02.966][DEBUG] [Sequence Thread] =========== Save file took 3402 ms
[02/27/19 21:51:02.966][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Image "m81_Light_90sec_1x1__Blue_gain_76_2019-02-27_214927_frame12_-15C.fit" saved.  HFR = 2.57.
[02/27/19 21:51:02.966][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Image "m81_Light_90sec_1x1__Blue_gain_76_2019-02-27_214927_frame12_-15C.fit" saved.  HFR = 2.57.)...
[02/27/19 21:51:02.970][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:51:02.970][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:2; f:11; o:
[02/27/19 21:51:02.970][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:51:02.970][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:51:02.970][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:51:03.071][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:51:03.071][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:51:03.071][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:2; f:11; o:
[02/27/19 21:51:03.071][DEBUG] [Sequence Thread] EventMarker 18 - t:m81 (1); e:2; f:11; o:
[02/27/19 21:51:03.079][DEBUG] [Sequence Thread] EventMarker 19 - t:m81 (1); e:2; f:12; o:
[02/27/19 21:51:03.079][DEBUG] [Sequence Thread] EventMarker 20 - t:m81 (1); e:2; f:12; o:
[02/27/19 21:51:03.079][DEBUG] [Sequence Thread] Running post event...
[02/27/19 21:51:03.079][DEBUG] [Sequence Thread] EventMarker 21 - t:m81 (1); e:2; f:12; o:
[02/27/19 21:51:03.084][DEBUG] [Sequence Thread] Incremented numComplete (12) for event[2]...
[02/27/19 21:51:03.085][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:51:03.085][DEBUG] [Sequence Thread] Current event[2] frame count: 12/60...
[02/27/19 21:51:03.085][DEBUG] [Sequence Thread] Looking at event[3]...
[02/27/19 21:51:03.085][DEBUG] [Sequence Thread] Found event event[3] with remaining frames.
[02/27/19 21:51:03.085][DEBUG] [Sequence Thread] Event[3] frame count: 11/60...
[02/27/19 21:51:03.085][DEBUG] [Sequence Thread] Getting next event (3)...
[02/27/19 21:51:03.085][DEBUG] [Sequence Thread] Checking for auto manual focus (post)...
[02/27/19 21:51:03.085][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:51:03.098][DEBUG] [Sequence Thread] Attempting to move to next event...
[02/27/19 21:51:03.098][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:51:03.098][DEBUG] [Sequence Thread] Current event[2] frame count: 12/60...
[02/27/19 21:51:03.098][DEBUG] [Sequence Thread] Looking at event[3]...
[02/27/19 21:51:03.098][DEBUG] [Sequence Thread] Found event event[3] with remaining frames.
[02/27/19 21:51:03.098][DEBUG] [Sequence Thread] Event[3] frame count: 11/60...
[02/27/19 21:51:03.098][DEBUG] [Sequence Thread] Getting next event (3)...
[02/27/19 21:51:03.098][DEBUG] [Sequence Thread] Running pre event...
[02/27/19 21:51:03.118][DEBUG] [Sequence Thread] Current target has end time at 28/02/2019 06:30:00
[02/27/19 21:51:03.118][DEBUG] [Sequence Thread] End time of next frame is at 27/02/2019 21:52:33
[02/27/19 21:51:03.118][DEBUG] [Sequence Thread] Target is still before end time, continuing...
[02/27/19 21:51:03.118][DEBUG] [Sequence Thread] Running capture event...
[02/27/19 21:51:03.120][DEBUG] [Sequence Thread] ------------- Starting capture frame for event[3] -------------
[02/27/19 21:51:03.136][DEBUG] [Sequence Thread] Sending commands...
[02/27/19 21:51:03.136][DEBUG] [Sequence Thread] SetFlatBox: Frame Type is Light
[02/27/19 21:51:03.136][DEBUG] [Sequence Thread] EventMarker 2 - t:m81 (1); e:3; f:11; o:
[02/27/19 21:51:03.136][DEBUG] [Sequence Thread] Checking if Meridian Flip is needed
[02/27/19 21:51:03.136][DEBUG] [Sequence Thread] Telescope is on the West side of the mount
[02/27/19 21:51:03.136][DEBUG] [Sequence Thread] Meridian Flip not needed, Hour Angle < Degrees Past To Flip: -28.5679991254707 < 0
[02/27/19 21:51:03.136][DEBUG] [Sequence Thread] EventMarker 3 - t:m81 (1); e:3; f:11; o:
[02/27/19 21:51:03.137][DEBUG] [Sequence Thread] EventMarker 4 - t:m81 (1); e:3; f:11; o:
[02/27/19 21:51:03.137][DEBUG] [Sequence Thread] Setting filter position 2...
[02/27/19 21:51:03.144][DEBUG] [Sequence Thread] Setting filter: Red...
[02/27/19 21:51:03.144][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 1...
[02/27/19 21:51:03.144][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 1 is complete...
[02/27/19 21:51:03.346][DEBUG] [Sequence Thread] Adjust focuser pos per filter: Moving focsuer to focus position (64697)...
[02/27/19 21:51:03.346][DEBUG] [Sequence Thread] Adjust focuser pos per filter
[02/27/19 21:51:03.346][DEBUG] [Sequence Thread] Old filter: Blue; Focus pos: 64704
[02/27/19 21:51:03.346][DEBUG] [Sequence Thread] New filter: Red; Focus pos: 64697
[02/27/19 21:51:03.346][DEBUG] [Sequence Thread] Pos delta: -7 steps
[02/27/19 21:51:03.346][DEBUG] [Sequence Thread] New position-> (current: 4852) + (delta: -7) = 4845
[02/27/19 21:51:03.346][DEBUG] [Sequence Thread] Focuser moving to 4845
[02/27/19 21:51:04.007][DEBUG] [Sequence Thread] Focuser move call complete
[02/27/19 21:51:04.020][DEBUG] [Sequence Thread] Focuser position matches requested position (4845), continuing...
[02/27/19 21:51:04.020][DEBUG] [Sequence Thread] focuser move is complete...
[02/27/19 21:51:04.023][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 2...
[02/27/19 21:51:07.024][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 2 complete...
[02/27/19 21:51:07.038][DEBUG] [Sequence Thread] EventMarker 5 - t:m81 (1); e:3; f:11; o:
[02/27/19 21:51:07.038][DEBUG] [Sequence Thread] Checking for auto manual focus (pre)...
[02/27/19 21:51:07.038][DEBUG] [Sequence Thread] EventMarker 6 - t:m81 (1); e:3; f:11; o:
[02/27/19 21:51:07.046][DEBUG] [Sequence Thread] Autoguider will not dither this frame. Total frames is not a modulus of 5
[02/27/19 21:51:07.046][DEBUG] [Sequence Thread] EventMarker 1 - t:m81 (1); e:3; f:11; o:
[02/27/19 21:51:07.047][DEBUG] [Sequence Thread] Created base name for frame capture: m81_Light_90sec_1x1__Red_gain_76_2019-02-27_215107_frame12_-15C
[02/27/19 21:51:07.047][DEBUG] [Sequence Thread] Created directory for frame capture: C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\
[02/27/19 21:51:07.047][DEBUG] [Sequence Thread] EventMarker 7 - t:m81 (1); e:3; f:11; o:
[02/27/19 21:51:07.047][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:51:07.047][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:3; f:11; o:
[02/27/19 21:51:07.047][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:51:07.047][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:51:07.047][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:51:07.148][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:51:07.148][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:51:07.148][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:3; f:11; o:
[02/27/19 21:51:07.149][DEBUG] [Sequence Thread] {"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}
[02/27/19 21:51:07.149][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}

[02/27/19 21:51:07.149][DEBUG] [Sequence Thread] EventMarker 172 - t:m81 (1); e:3; f:11; o:
[02/27/19 21:51:07.149][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:51:07.149][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:51:07.149][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:51:07.230][DEBUG] [PHD2 Listener Thread] Unknown object from PHD2: {"Event":"SettleBegin","Timestamp":1551304267.180,"Host":"JGL2_2","Inst":1}
[02/27/19 21:51:07.249][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:51:07.249][DEBUG] [Sequence Thread] EventMarker 173 - t:m81 (1); e:3; f:11; o:
[02/27/19 21:51:07.250][DEBUG] [Sequence Thread] User has elected to skip guider settling over time...
[02/27/19 21:51:07.250][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Attempting to settle the auto guider...
[02/27/19 21:51:07.250][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Attempting to settle the auto guider...)...
[02/27/19 21:51:07.250][DEBUG] [Sequence Thread] Waiting for Auto Guider distance to fall below 0.5
[02/27/19 21:51:07.250][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:51:07.250][DEBUG] [Sequence Thread] PHD2 distance request returned 0.2...
[02/27/19 21:51:07.259][DEBUG] [Sequence Thread] Distance is below 0.5, starting timer...
[02/27/19 21:51:07.759][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:51:07.759][DEBUG] [Sequence Thread] PHD2 distance request returned 0.2...
[02/27/19 21:51:07.881][DEBUG] [Sequence Thread] Distance stayed below 0.5 for 0 seconds, done settling...
[02/27/19 21:51:07.882][DEBUG] [Sequence Thread] Auto guider has settled...
[02/27/19 21:51:07.882][DEBUG] [Sequence Thread] EventMarker 8 - t:m81 (1); e:3; f:11; o:
[02/27/19 21:51:07.882][DEBUG] [Sequence Thread] EventMarker 9 - t:m81 (1); e:3; f:11; o:
[02/27/19 21:51:07.882][DEBUG] [Sequence Thread] EventMarker 10 - t:m81 (1); e:3; f:11; o:
[02/27/19 21:51:07.882][DEBUG] [Sequence Thread] Finished sending frame capture.  Entering wait mode...
[02/27/19 21:51:07.882][DEBUG] [Sequence Thread] EventMarker 11 - t:m81 (1); e:3; f:11; o:
[02/27/19 21:51:07.883][DEBUG] [Sequence Thread] EventMarker 12 - t:m81 (1); e:3; f:11; o:
[02/27/19 21:51:07.886][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Starting integration of m81; Event 4; Frame 12 for 90s...
[02/27/19 21:51:07.886][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Starting integration of m81; Event 4; Frame 12 for 90s...)...
[02/27/19 21:51:07.886][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, TimedError): (2019-02-25) Failure while integrating m81; Event 4; Frame 12 for 90s. Image has not downloaded in alloted time period.
[02/27/19 21:51:07.886][DEBUG] [Sequence Thread] GNS: Sent timed event to GNS...
[02/27/19 21:51:07.888][DEBUG] [Sequence Thread] EventMarker 13 - t:m81 (1); e:3; f:11; o:
[02/27/19 21:51:07.891][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE message received...
[02/27/19 21:51:07.892][DEBUG] [Camera Thread] SetAscomGain to 76
[02/27/19 21:51:07.893][DEBUG] [Camera Thread] Camera gain set to 76
[02/27/19 21:51:07.893][DEBUG] [Camera Thread] SetAscomNormalSpeed... 
[02/27/19 21:51:07.893][DEBUG] [Camera Thread] Cannot set readout speed, not supported by camera...
[02/27/19 21:51:07.988][DEBUG] [PHD2 Listener Thread] PHD2: Settle done received: GOOD
[02/27/19 21:51:48.471][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:51:48.494][DEBUG] [MF Update Thread] Performing serialize...
[02/27/19 21:52:38.006][DEBUG] [Sequence Thread] EventMarker 15 - t:m81 (1); e:3; f:11; o:
[02/27/19 21:52:38.009][DEBUG] [Sequence Thread] Waking from exposure time sleep period...
[02/27/19 21:52:38.009][DEBUG] [Sequence Thread] Checking to see if the CCD has a temp...
[02/27/19 21:52:38.009][DEBUG] [Sequence Thread] Saving the CCD temp...
[02/27/19 21:52:38.015][DEBUG] [Sequence Thread] Entering super dangerous loop to await image completion...
[02/27/19 21:52:38.017][DEBUG] [Sequence Thread] EventMarker 16 - t:m81 (1); e:3; f:11; o:
[02/27/19 21:54:09.753][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE complete...
[02/27/19 21:54:10.145][DEBUG] [Sequence Thread] EventMarker 17 - t:m81 (1); e:3; f:11; o:
[02/27/19 21:54:10.146][DEBUG] [Sequence Thread] Image reported as complete.  Continuing...
[02/27/19 21:54:10.146][DEBUG] [Sequence Thread] Collecting FITs headers...
[02/27/19 21:54:10.147][DEBUG] [Sequence Thread] ASCOM Camera: Could not get last exposure start time.  Reported as (unknown)
[02/27/19 21:54:10.147][DEBUG] [Sequence Thread] DATE-LOC time provided by SGPro (failed to retrieve valid entry from camera)...
[02/27/19 21:54:10.148][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info for last solve...
[02/27/19 21:54:10.148][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info from UI...
[02/27/19 21:54:10.148][DEBUG] [Sequence Thread] Clearing timed monitoring events...
[02/27/19 21:54:10.154][DEBUG] [Sequence Thread] Created full file name (file does not exist): C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\m81_Light_90sec_1x1__Red_gain_76_2019-02-27_215107_frame12_-15C.fit
[02/27/19 21:54:10.154][DEBUG] [Sequence Thread] SaveFileAscom: Start...
[02/27/19 21:54:10.154][DEBUG] [Sequence Thread] SaveFileAscom: Checking image data...
[02/27/19 21:54:10.154][DEBUG] [Sequence Thread] SaveFileAscom: Create normal preview bitmap...
[02/27/19 21:54:10.162][DEBUG] [Sequence Thread] SaveFileAscom: Locking preview bits...
[02/27/19 21:54:10.162][DEBUG] [Sequence Thread] SaveFileAscom: Validating file name...
[02/27/19 21:54:10.162][DEBUG] [Sequence Thread] SaveFileAscom: Starting byte traversal...
[02/27/19 21:54:10.338][DEBUG] [Sequence Thread] SaveFileAscom: Unlocking preview bits...
[02/27/19 21:54:10.338][DEBUG] [Sequence Thread] SaveFileAscom: Saving preview bitmap to disk...
[02/27/19 21:54:10.338][DEBUG] [Sequence Thread] SaveFileBmp16: Locking bitmap for disk write...
[02/27/19 21:54:10.338][DEBUG] [Sequence Thread] SaveFileBmp16: Opening file stream...
[02/27/19 21:54:10.339][DEBUG] [Sequence Thread] SaveFileBmp16: Writing FITS headers...
[02/27/19 21:54:10.339][DEBUG] [Sequence Thread] SaveFileBmp16: Traversing and persisting bitmap data...
[02/27/19 21:54:10.505][DEBUG] [Sequence Thread] SaveFileBmp16: FITS block fill...
[02/27/19 21:54:10.505][DEBUG] [Sequence Thread] SaveFileBmp16: Unlocking bitmap...
[02/27/19 21:54:10.505][DEBUG] [Sequence Thread] SaveFileBmp16: Closing file stream
[02/27/19 21:54:10.506][DEBUG] [Sequence Thread] SaveFileAscom: Displaying image preview in UI...
[02/27/19 21:54:10.506][DEBUG] [Sequence Thread] Internal Interface: Set Preview...
[02/27/19 21:54:10.506][DEBUG] [Sequence Thread] Display image preview using asynch task...
[02/27/19 21:54:10.815][DEBUG] [Main Thread] --> Find stars (normal)
[02/27/19 21:54:10.877][DEBUG] [Main Thread] AF frame was too large... downsample = 0.5...
[02/27/19 21:54:12.722][DEBUG] [Main Thread] Star detection using min star size of 3px...
[02/27/19 21:54:12.722][DEBUG] [Main Thread] Star detection using max star size of 60px...
[02/27/19 21:54:12.771][DEBUG] [Main Thread] Find stars took: 1956 ms...
[02/27/19 21:54:12.771][DEBUG] [Main Thread] Star list contains 158 stars...
[02/27/19 21:54:12.771][DEBUG] [Main Thread] Calculating HFR with sample size: 6
[02/27/19 21:54:13.730][DEBUG] [Sequence Thread] SaveFileAscom: Done
[02/27/19 21:54:13.730][DEBUG] [Sequence Thread] =========== Save file took 3581 ms
[02/27/19 21:54:13.730][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Image "m81_Light_90sec_1x1__Red_gain_76_2019-02-27_215107_frame12_-15C.fit" saved.  HFR = 2.88.
[02/27/19 21:54:13.730][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Image "m81_Light_90sec_1x1__Red_gain_76_2019-02-27_215107_frame12_-15C.fit" saved.  HFR = 2.88.)...
[02/27/19 21:54:13.733][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:54:13.733][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:3; f:11; o:
[02/27/19 21:54:13.733][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:54:13.734][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:54:13.734][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:54:13.834][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:54:13.834][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:54:13.834][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:3; f:11; o:
[02/27/19 21:54:13.834][DEBUG] [Sequence Thread] EventMarker 18 - t:m81 (1); e:3; f:11; o:
[02/27/19 21:54:13.840][DEBUG] [Sequence Thread] EventMarker 19 - t:m81 (1); e:3; f:12; o:
[02/27/19 21:54:13.840][DEBUG] [Sequence Thread] EventMarker 20 - t:m81 (1); e:3; f:12; o:
[02/27/19 21:54:13.840][DEBUG] [Sequence Thread] Running post event...
[02/27/19 21:54:13.840][DEBUG] [Sequence Thread] EventMarker 21 - t:m81 (1); e:3; f:12; o:
[02/27/19 21:54:13.843][DEBUG] [Sequence Thread] Incremented numComplete (12) for event[3]...
[02/27/19 21:54:13.847][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:54:13.847][DEBUG] [Sequence Thread] Current event[3] frame count: 12/60...
[02/27/19 21:54:13.847][DEBUG] [Sequence Thread] Looking at event[4]...
[02/27/19 21:54:13.847][DEBUG] [Sequence Thread] Found event event[4] with remaining frames.
[02/27/19 21:54:13.847][DEBUG] [Sequence Thread] Event[4] frame count: 11/60...
[02/27/19 21:54:13.847][DEBUG] [Sequence Thread] Getting next event (4)...
[02/27/19 21:54:13.847][DEBUG] [Sequence Thread] Checking for auto manual focus (post)...
[02/27/19 21:54:13.848][DEBUG] [Main Thread] PopulateDataModel:  Transferring view to the data model...
[02/27/19 21:54:13.860][DEBUG] [Sequence Thread] Attempting to move to next event...
[02/27/19 21:54:13.860][DEBUG] [Sequence Thread] Attempting to find next event...
[02/27/19 21:54:13.860][DEBUG] [Sequence Thread] Current event[3] frame count: 12/60...
[02/27/19 21:54:13.860][DEBUG] [Sequence Thread] Looking at event[4]...
[02/27/19 21:54:13.860][DEBUG] [Sequence Thread] Found event event[4] with remaining frames.
[02/27/19 21:54:13.860][DEBUG] [Sequence Thread] Event[4] frame count: 11/60...
[02/27/19 21:54:13.860][DEBUG] [Sequence Thread] Getting next event (4)...
[02/27/19 21:54:13.860][DEBUG] [Sequence Thread] Running pre event...
[02/27/19 21:54:13.879][DEBUG] [Sequence Thread] Current target has end time at 28/02/2019 06:30:00
[02/27/19 21:54:13.879][DEBUG] [Sequence Thread] End time of next frame is at 27/02/2019 21:55:43
[02/27/19 21:54:13.879][DEBUG] [Sequence Thread] Target is still before end time, continuing...
[02/27/19 21:54:13.879][DEBUG] [Sequence Thread] Running capture event...
[02/27/19 21:54:13.881][DEBUG] [Sequence Thread] ------------- Starting capture frame for event[4] -------------
[02/27/19 21:54:13.911][DEBUG] [Sequence Thread] Sending commands...
[02/27/19 21:54:13.911][DEBUG] [Sequence Thread] SetFlatBox: Frame Type is Light
[02/27/19 21:54:13.911][DEBUG] [Sequence Thread] EventMarker 2 - t:m81 (1); e:4; f:11; o:
[02/27/19 21:54:13.911][DEBUG] [Sequence Thread] Checking if Meridian Flip is needed
[02/27/19 21:54:13.911][DEBUG] [Sequence Thread] Telescope is on the West side of the mount
[02/27/19 21:54:13.911][DEBUG] [Sequence Thread] Meridian Flip not needed, Hour Angle < Degrees Past To Flip: -27.7729034754447 < 0
[02/27/19 21:54:13.911][DEBUG] [Sequence Thread] EventMarker 3 - t:m81 (1); e:4; f:11; o:
[02/27/19 21:54:13.911][DEBUG] [Sequence Thread] EventMarker 4 - t:m81 (1); e:4; f:11; o:
[02/27/19 21:54:13.911][DEBUG] [Sequence Thread] Setting filter position 3...
[02/27/19 21:54:13.931][DEBUG] [Sequence Thread] Setting filter: Green...
[02/27/19 21:54:13.931][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 1...
[02/27/19 21:54:13.931][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 1 is complete...
[02/27/19 21:54:14.134][DEBUG] [Sequence Thread] Adjust focuser pos per filter: Moving focsuer to focus position (64679)...
[02/27/19 21:54:14.134][DEBUG] [Sequence Thread] Adjust focuser pos per filter
[02/27/19 21:54:14.134][DEBUG] [Sequence Thread] Old filter: Red; Focus pos: 64697
[02/27/19 21:54:14.134][DEBUG] [Sequence Thread] New filter: Green; Focus pos: 64679
[02/27/19 21:54:14.134][DEBUG] [Sequence Thread] Pos delta: -18 steps
[02/27/19 21:54:14.134][DEBUG] [Sequence Thread] New position-> (current: 4845) + (delta: -18) = 4827
[02/27/19 21:54:14.134][DEBUG] [Sequence Thread] Focuser moving to 4827
[02/27/19 21:54:14.879][DEBUG] [Sequence Thread] Focuser move call complete
[02/27/19 21:54:15.070][DEBUG] [Sequence Thread] Focuser position matches requested position (4827), continuing...
[02/27/19 21:54:15.070][DEBUG] [Sequence Thread] focuser move is complete...
[02/27/19 21:54:15.072][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 2...
[02/27/19 21:54:17.073][DEBUG] [Sequence Thread] Moving filter wheel, isMoving, check 2 complete...
[02/27/19 21:54:17.086][DEBUG] [Sequence Thread] EventMarker 5 - t:m81 (1); e:4; f:11; o:
[02/27/19 21:54:17.086][DEBUG] [Sequence Thread] Checking for auto manual focus (pre)...
[02/27/19 21:54:17.086][DEBUG] [Sequence Thread] EventMarker 6 - t:m81 (1); e:4; f:11; o:
[02/27/19 21:54:17.095][DEBUG] [Sequence Thread] Autoguider will not dither this frame. Total frames is not a modulus of 5
[02/27/19 21:54:17.095][DEBUG] [Sequence Thread] EventMarker 1 - t:m81 (1); e:4; f:11; o:
[02/27/19 21:54:17.095][DEBUG] [Sequence Thread] Created base name for frame capture: m81_Light_90sec_1x1__Green_gain_76_2019-02-27_215417_frame12_-15C
[02/27/19 21:54:17.095][DEBUG] [Sequence Thread] Created directory for frame capture: C:\Users\user\OneDrive\Astrophotography\SGPro\Images\m81\2019-02-27\Light\
[02/27/19 21:54:17.095][DEBUG] [Sequence Thread] EventMarker 7 - t:m81 (1); e:4; f:11; o:
[02/27/19 21:54:17.095][DEBUG] [Sequence Thread] Resuming auto guiding (settling)...
[02/27/19 21:54:17.095][DEBUG] [Sequence Thread] EventMarker 170 - t:m81 (1); e:4; f:11; o:
[02/27/19 21:54:17.095][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:54:17.095][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:54:17.095][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:54:17.196][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:54:17.196][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state
[02/27/19 21:54:17.196][DEBUG] [Sequence Thread] EventMarker 171 - t:m81 (1); e:4; f:11; o:
[02/27/19 21:54:17.197][DEBUG] [Sequence Thread] {"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}
[02/27/19 21:54:17.197][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "guide", "params": [{"pixels": 0.5, "time": 0, "timeout": 600}, false ], "id": 1003}

[02/27/19 21:54:17.197][DEBUG] [Sequence Thread] EventMarker 172 - t:m81 (1); e:4; f:11; o:
[02/27/19 21:54:17.197][DEBUG] [Sequence Thread] Checking PHD2 state...
[02/27/19 21:54:17.197][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/27/19 21:54:17.197][DEBUG] [Sequence Thread] Sending to PHD2:
{"method": "get_app_state", "id": 1001}

[02/27/19 21:54:17.253][DEBUG] [PHD2 Listener Thread] Unknown object from PHD2: {"Event":"SettleBegin","Timestamp":1551304457.203,"Host":"JGL2_2","Inst":1}
[02/27/19 21:54:17.297][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/27/19 21:54:17.297][DEBUG] [Sequence Thread] EventMarker 173 - t:m81 (1); e:4; f:11; o:
[02/27/19 21:54:17.297][DEBUG] [Sequence Thread] User has elected to skip guider settling over time...
[02/27/19 21:54:17.297][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Attempting to settle the auto guider...
[02/27/19 21:54:17.297][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Attempting to settle the auto guider...)...
[02/27/19 21:54:17.297][DEBUG] [Sequence Thread] Waiting for Auto Guider distance to fall below 0.5
[02/27/19 21:54:17.297][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:54:17.297][DEBUG] [Sequence Thread] PHD2 distance request returned 0.2...
[02/27/19 21:54:17.664][DEBUG] [Sequence Thread] Distance is below 0.5, starting timer...
[02/27/19 21:54:17.909][DEBUG] [PHD2 Listener Thread] PHD2: Settle done received: GOOD
[02/27/19 21:54:18.165][DEBUG] [Sequence Thread] PHD2 distance request...
[02/27/19 21:54:18.165][DEBUG] [Sequence Thread] PHD2 distance request returned 0.1...
[02/27/19 21:54:18.175][DEBUG] [Sequence Thread] Distance stayed below 0.5 for 0 seconds, done settling...
[02/27/19 21:54:18.176][DEBUG] [Sequence Thread] Auto guider has settled...
[02/27/19 21:54:18.176][DEBUG] [Sequence Thread] EventMarker 8 - t:m81 (1); e:4; f:11; o:
[02/27/19 21:54:18.176][DEBUG] [Sequence Thread] EventMarker 9 - t:m81 (1); e:4; f:11; o:
[02/27/19 21:54:18.176][DEBUG] [Sequence Thread] EventMarker 10 - t:m81 (1); e:4; f:11; o:
[02/27/19 21:54:18.176][DEBUG] [Sequence Thread] Finished sending frame capture.  Entering wait mode...
[02/27/19 21:54:18.176][DEBUG] [Sequence Thread] EventMarker 11 - t:m81 (1); e:4; f:11; o:
[02/27/19 21:54:18.177][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE message received...
[02/27/19 21:54:18.177][DEBUG] [Sequence Thread] EventMarker 12 - t:m81 (1); e:4; f:11; o:
[02/27/19 21:54:18.179][DEBUG] [Camera Thread] SetAscomGain to 76
[02/27/19 21:54:18.180][DEBUG] [Camera Thread] Camera gain set to 76
[02/27/19 21:54:18.180][DEBUG] [Camera Thread] SetAscomNormalSpeed... 
[02/27/19 21:54:18.180][DEBUG] [Camera Thread] Cannot set readout speed, not supported by camera...
[02/27/19 21:54:18.187][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, Status): (2019-02-25) Starting integration of m81; Event 5; Frame 12 for 90s...
[02/27/19 21:54:18.187][DEBUG] [Sequence Thread] GNS: Sent status message to GNS ((2019-02-25) Starting integration of m81; Event 5; Frame 12 for 90s...)...
[02/27/19 21:54:18.187][DEBUG] [Sequence Thread] Handling monitoring event (Good Night System, TimedError): (2019-02-25) Failure while integrating m81; Event 5; Frame 12 for 90s. Image has not downloaded in alloted time period.
[02/27/19 21:54:18.187][DEBUG] [Sequence Thread] GNS: Sent timed event to GNS...
[02/27/19 21:54:18.188][DEBUG] [Sequence Thread] EventMarker 13 - t:m81 (1); e:4; f:11; o: