[10/13/17 01:00:02.092][DEBUG] [Sequence Thread] EventMarker 2 - t:NGC 253 (1); e:0; f:18; o: [10/13/17 01:00:02.092][DEBUG] [Sequence Thread] Checking if Meridian Flip is needed [10/13/17 01:00:02.092][DEBUG] [Sequence Thread] Telescope is on the West side of the mount [10/13/17 01:00:02.093][DEBUG] [Sequence Thread] Presenting wait for meridian dialog... [10/13/17 01:01:13./685][DEBUG] [Sequence Thread] Meridian Flip needed, Hour Angle >= Degrees Past To Flip: 1.2510980993278 >= 1.25 [10/13/17 01:01:13.685][DEBUG] [Sequence Thread] Running blocking meridian flip... [10/13/17 01:01:13.812][DEBUG] [Pier Flip Thread] Meridian Flip: Starting Meridian Flip Procedure [10/13/17 01:01:13.813][DEBUG] [Pier Flip Thread] Meridian Flip: Calling SGM_TELESCOPE_SOLVE - No Sync [10/13/17 01:01:13.963][DEBUG] [Pier Flip Thread] Meridian flip: Waiting for scope solve to complete... [10/13/17 01:01:13.965][DEBUG] [Telescope Thread] SGM_TELESCOPE_SOLVE message received... [10/13/17 01:01:13.965][DEBUG] [Telescope Thread] Telescope solve with plate solver PlateSolve2... [10/13/17 01:01:13.977][DEBUG] [Telescope Thread] Setting filter for scope sync... [10/13/17 01:01:13.978][DEBUG] [Telescope Thread] Setting filter position 1... [10/13/17 01:01:13.983][DEBUG] [Telescope Thread] Setting filter: Lum... [10/13/17 01:01:13.983][DEBUG] [Telescope Thread] Moving filter wheel, isMoving, check 1... [10/13/17 01:01:13.983][DEBUG] [Telescope Thread] Moving filter wheel, isMoving, check 1 is complete... [10/13/17 01:01:14.186][DEBUG] [Telescope Thread] Moving filter wheel, isMoving, check 2... [10/13/17 01:01:16.883][DEBUG] [Main Thread] PopulateDataModel: Transferring view to the data model... [10/13/17 01:01:16.910][DEBUG] [MF Update Thread] Performing serialize... [10/13/17 01:01:17.189][DEBUG] [Telescope Thread] Moving filter wheel, isMoving, check 2 complete... [10/13/17 01:01:17.206][DEBUG] [Telescope Thread] Plate solving scope frame... [10/13/17 01:01:17.206][DEBUG] [Telescope Thread] Created full file name (file does not exist): C:\Users\WinAstro\AppData\Local\SequenceGenerator\Temp\plate_solve_image.fit [10/13/17 01:01:17.221][DEBUG] [Camera Thread] SGM_CAMERA_PLATE_SOLVER_CAPTURE message received... [10/13/17 01:01:17.221][DEBUG] [Camera Thread] Collecting FITs headers for plate solve frame... [10/13/17 01:01:17.221][DEBUG] [Camera Thread] Collecting FITs headers for plate solve frame... [10/13/17 01:01:17.368][DEBUG] [Camera Thread] SetAscomHighSpeed... [10/13/17 01:01:17.369][DEBUG] [Camera Thread] Cannot set readout speed, not supported by camera... [10/13/17 01:01:23.308][DEBUG] [Camera Thread] Created full file name (file does not exist): C:\Users\WinAstro\AppData\Local\SequenceGenerator\Temp\plate_solve_image.fit [10/13/17 01:01:23.308][DEBUG] [Camera Thread] SaveFileAscom: Start... [10/13/17 01:01:23.308][DEBUG] [Camera Thread] SaveFileAscom: Checking image data... [10/13/17 01:01:23.308][DEBUG] [Camera Thread] SaveFileAscom: Create normal preview bitmap... [10/13/17 01:01:23.313][DEBUG] [Camera Thread] SaveFileAscom: Locking preview bits... [10/13/17 01:01:23.313][DEBUG] [Camera Thread] SaveFileAscom: Validating file name... [10/13/17 01:01:23.313][DEBUG] [Camera Thread] SaveFileAscom: Starting byte traversal... [10/13/17 01:01:23.382][DEBUG] [Camera Thread] SaveFileAscom: Unlocking preview bits... [10/13/17 01:01:23.382][DEBUG] [Camera Thread] SaveFileAscom: Saving preview bitmap to disk... [10/13/17 01:01:23.382][DEBUG] [Camera Thread] SaveFileBmp16: Locking bitmap for disk write... [10/13/17 01:01:23.382][DEBUG] [Camera Thread] SaveFileBmp16: Opening file stream... [10/13/17 01:01:23.383][DEBUG] [Camera Thread] SaveFileBmp16: Writing FITS headers... [10/13/17 01:01:23.383][DEBUG] [Camera Thread] SaveFileBmp16: Traversing and persisting bitmap data... [10/13/17 01:01:23.467][DEBUG] [Camera Thread] SaveFileBmp16: FITS block fill... [10/13/17 01:01:23.467][DEBUG] [Camera Thread] SaveFileBmp16: Unlocking bitmap... [10/13/17 01:01:23.467][DEBUG] [Camera Thread] SaveFileBmp16: Closing file stream [10/13/17 01:01:23.473][DEBUG] [Camera Thread] Internal Interface: Set Preview... [10/13/17 01:01:23.473][DEBUG] [Camera Thread] Display image preview using asynch task... [10/13/17 01:01:23.908][DEBUG] [Camera Thread] SaveFileAscom: Done [10/13/17 01:01:23.908][DEBUG] [Camera Thread] =========== Save file took 604 ms [10/13/17 01:01:23.908][DEBUG] [Camera Thread] SGM_CAMERA_PLATE_SOLVER_CAPTURE complete... [10/13/17 01:01:24.095][DEBUG] [Telescope Thread] ************* SOLVE HINTS **************** [10/13/17 01:01:24.095][DEBUG] [Telescope Thread] SOLVER: PlateSolve2 [10/13/17 01:01:24.095][DEBUG] [Telescope Thread] BLIND: False [10/13/17 01:01:24.095][DEBUG] [Telescope Thread] METHOD: Max Regions [10/13/17 01:01:24.095][DEBUG] [Telescope Thread] RA: 0.686175201324351 [10/13/17 01:01:24.095][DEBUG] [Telescope Thread] DEC: -21.3413375288258 [10/13/17 01:01:24.095][DEBUG] [Telescope Thread] SCALE: 2.62951 [10/13/17 01:01:24.095][DEBUG] [Telescope Thread] ****************************************** [10/13/17 01:01:24.112][DEBUG] [Telescope Thread] FitsFileHeaderData: Angle - 0 [10/13/17 01:01:24.112][DEBUG] [Telescope Thread] FitsFileHeaderData: Scale - 0 [10/13/17 01:01:24.112][DEBUG] [Telescope Thread] FitsFileHeaderData: RA - 0.68634697490564 [10/13/17 01:01:24.112][DEBUG] [Telescope Thread] FitsFileHeaderData: DEC - -21.3415083915142 [10/13/17 01:01:24.188][DEBUG] [Telescope Thread] PlateSove2 Param: RA (RAD) - 0.179640247629673 [10/13/17 01:01:24.188][DEBUG] [Telescope Thread] PlateSove2 Param: DEC (RAD) - -0.37247660665744 [10/13/17 01:01:24.188][DEBUG] [Telescope Thread] PlateSove2 Param: Width - 2328 [10/13/17 01:01:24.188][DEBUG] [Telescope Thread] PlateSove2 Param: Height - 1760 [10/13/17 01:01:24.188][DEBUG] [Telescope Thread] PlateSolve2 Command Line: [10/13/17 01:01:24.188][DEBUG] [Telescope Thread] C:\Users\WinAstro\AppData\Local\SequenceGenerator\\PlateSolve2.exe 0.17964024762967,-0.37247660665744,0.02967786599846,0.02243687463801,3000,C:\Users\WinAstro\AppData\Local\SequenceGenerator\\Temp\psXSolve_11.fit [10/13/17 01:01:26.695][DEBUG] [Telescope Thread] *********** SUCCESSFUL SOLVE ************* [10/13/17 01:01:26.695][DEBUG] [Telescope Thread] SOLVER: False [10/13/17 01:01:26.695][DEBUG] [Telescope Thread] SUCCESS: True [10/13/17 01:01:26.695][DEBUG] [Telescope Thread] CONF: 102 [10/13/17 01:01:26.695][DEBUG] [Telescope Thread] BLIND: False [10/13/17 01:01:26.695][DEBUG] [Telescope Thread] RA: 0.692328968083969 [10/13/17 01:01:26.695][DEBUG] [Telescope Thread] DEC: -21.0279252227414 [10/13/17 01:01:26.695][DEBUG] [Telescope Thread] SCALE: 2.63051 [10/13/17 01:01:26.695][DEBUG] [Telescope Thread] FLIPPED: False [10/13/17 01:01:26.695][DEBUG] [Telescope Thread] ANGLE (EON): 260.08 [10/13/17 01:01:26.695][DEBUG] [Telescope Thread] MSG: Valid solve. [10/13/17 01:01:26.695][DEBUG] [Telescope Thread] ****************************************** [10/13/17 01:01:26.702][DEBUG] [Telescope Thread] Scope solve complete... [10/13/17 01:01:26.702][DEBUG] [Telescope Thread] SGM_TELESCOPE_SOLVE message complete... [10/13/17 01:01:26.717][DEBUG] [Pier Flip Thread] Meridian flip: Scope solve complete... [10/13/17 01:01:26.717][DEBUG] [Pier Flip Thread] Meridian Flip: Solve was Successful [10/13/17 01:01:26.717][DEBUG] [Pier Flip Thread] Meridian Flip: Stopping the Auto Guider [10/13/17 01:01:26.718][DEBUG] [Pier Flip Thread] Attempting to stop PHD2 guiding... [10/13/17 01:01:26.718][DEBUG] [Pier Flip Thread] Checking PHD2 state... [10/13/17 01:01:26.718][DEBUG] [Pier Flip Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding [10/13/17 01:01:26.718][DEBUG] [Pier Flip Thread] Sending to PHD2: {"method": "get_app_state", "id": 1001} [10/13/17 01:01:26.819][DEBUG] [Pier Flip Thread] PHD2 GetPhdStatus - Post-Wait: Guiding [10/13/17 01:01:26.819][DEBUG] [Pier Flip Thread] Sending to PHD2: {"method": "stop_capture", "id": 1004} [10/13/17 01:01:26.819][DEBUG] [Pier Flip Thread] Checking PHD2 state... [10/13/17 01:01:26.819][DEBUG] [Pier Flip Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding [10/13/17 01:01:26.819][DEBUG] [Pier Flip Thread] Sending to PHD2: {"method": "get_app_state", "id": 1001} [10/13/17 01:01:26.919][DEBUG] [Pier Flip Thread] PHD2 GetPhdStatus - Post-Wait: Guiding [10/13/17 01:01:27.920][DEBUG] [Pier Flip Thread] Checking PHD2 state... [10/13/17 01:01:27.920][DEBUG] [Pier Flip Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding [10/13/17 01:01:27.920][DEBUG] [Pier Flip Thread] Sending to PHD2: {"method": "get_app_state", "id": 1001} [10/13/17 01:01:28.021][DEBUG] [Pier Flip Thread] PHD2 GetPhdStatus - Post-Wait: Stopped [10/13/17 01:01:28.021][DEBUG] [Pier Flip Thread] PHD2: Successfully stopped PHD2... [10/13/17 01:01:28.021][DEBUG] [Pier Flip Thread] Meridian Flip: Sending Telescope command to execute meridian flip [10/13/17 01:01:28.035][DEBUG] [Telescope Thread] ASCOM Telescope: Pier side is West [10/13/17 01:01:28.035][DEBUG] [Telescope Thread] ASCOM Telescope: attempting pier flip using slew [10/13/17 01:01:28.074][DEBUG] [Telescope Thread] Telescope: Slewing to J2000 RA: 0.686200946685253 (00h41m10.32s) Dec: -21.3405005827472 (-21°20'25.80") [10/13/17 01:01:28.074][DEBUG] [Telescope Thread] Telescope: Slew received J2000 coordinates, mount requires JNOW, converting... [10/13/17 01:01:28.074][DEBUG] [Telescope Thread] Telescope: Slewing to JNOW RA: 0.701052188873291 Dec: -21.2432026863098 [10/13/17 01:02:28.023][DEBUG] [PHD2 Listener Thread] PHD2 - No messages received from PHD2 for 1 minute, checking socket with status... [10/13/17 01:02:28.023][DEBUG] [PHD2 Listener Thread] Checking PHD2 state... [10/13/17 01:02:28.023][DEBUG] [PHD2 Listener Thread] PHD2 GetPhdStatus - Pre-Wait : Stopped [10/13/17 01:02:28.023][DEBUG] [PHD2 Listener Thread] Sending to PHD2: {"method": "get_app_state", "id": 1001} [10/13/17 01:02:28.023][DEBUG] [PHD2 Listener Thread] PHD2 GetPhdStatus - Post-Wait: Stopped [10/13/17 01:02:54.610][DEBUG] [Telescope Thread] Scope reports it is done with synchronous slew, verifying... [10/13/17 01:02:54.610][DEBUG] [Telescope Thread] Telescope: Slewing has completed [10/13/17 01:02:54.610][DEBUG] [Telescope Thread] Telescope: Settling for 30 seconds [10/13/17 01:03:24.611][DEBUG] [Telescope Thread] Telescope: Settling has completed [10/13/17 01:03:28.129][DEBUG] [PHD2 Listener Thread] PHD2 - No messages received from PHD2 for 1 minute, checking socket with status... [10/13/17 01:03:28.129][DEBUG] [PHD2 Listener Thread] Checking PHD2 state... [10/13/17 01:03:28.129][DEBUG] [PHD2 Listener Thread] PHD2 GetPhdStatus - Pre-Wait : Stopped [10/13/17 01:03:28.129][DEBUG] [PHD2 Listener Thread] Sending to PHD2: {"method": "get_app_state", "id": 1001} [10/13/17 01:03:28.129][DEBUG] [PHD2 Listener Thread] PHD2 GetPhdStatus - Post-Wait: Stopped [10/13/17 01:03:28.135][DEBUG] [Pier Flip Thread] Meridian Flip: Telescope command to meridian flip has completed [10/13/17 01:03:28.138][DEBUG] [Pier Flip Thread] Meridian Flip: Telescope has performed meridian flip [10/13/17 01:03:28.138][DEBUG] [Pier Flip Thread] Meridian Flip: Flipping Auto Guider calibration data [10/13/17 01:03:28.140][DEBUG] [Pier Flip Thread] Sending to PHD2: {"method": "flip_calibration", "id": 1005} [10/13/17 01:03:29.140][DEBUG] [Pier Flip Thread] Autoguider (PHDv2) successfully flipped calibration data [10/13/17 01:03:29.140][DEBUG] [Pier Flip Thread] Meridian Flip: Performing Auto Center [10/13/17 01:03:29.140][DEBUG] [Pier Flip Thread] Meridian flip reference data set to RA: 0.692328968083969; Dec: -21.0279252227414 [10/13/17 01:03:29.235][DEBUG] [Telescope Thread] Center telescope message received... [10/13/17 01:03:29.235][DEBUG] [Telescope Thread] Solving with Plate Solver PlateSolve2... [10/13/17 01:03:29.287][DEBUG] [Telescope Thread] Setting filter for auto center... [10/13/17 01:03:29.289][DEBUG] [Telescope Thread] Setting filter position 1... [10/13/17 01:03:29.289][DEBUG] [Telescope Thread] Filter position 1 is already set. Skipping... [10/13/17 01:03:29.289][DEBUG] [Telescope Thread] Performing auto center step 1... [10/13/17 01:03:29.289][DEBUG] [Telescope Thread] Skipping step 1... [10/13/17 01:03:29.289][DEBUG] [Telescope Thread] Auto center reference frame solved successfully... [10/13/17 01:03:29.291][DEBUG] [Telescope Thread] Performing auto center step 3 (scope)... [10/13/17 01:03:29.291][DEBUG] [Telescope Thread] Auto center slewing scope to match reference... [10/13/17 01:03:29.293][DEBUG] [Telescope Thread] Telescope: Slewing to J2000 RA: 0.692328968083969 (00h41m32.38s) Dec: -21.0279252227414 (-21°01'40.53") [10/13/17 01:03:29.293][DEBUG] [Telescope Thread] Telescope: Slew received J2000 coordinates, mount requires JNOW, converting... [10/13/17 01:03:29.293][DEBUG] [Telescope Thread] Telescope: Slewing to JNOW RA: 0.707183787200116 Dec: -20.9306459772851 [10/13/17 01:04:07.199][DEBUG] [Telescope Thread] Scope reports it is done with synchronous slew, verifying... [10/13/17 01:04:07.201][DEBUG] [Telescope Thread] Telescope: Slewing has completed [10/13/17 01:04:07.201][DEBUG] [Telescope Thread] Telescope: Settling for 30 seconds [10/13/17 01:04:28.332][DEBUG] [PHD2 Listener Thread] PHD2 - No messages received from PHD2 for 1 minute, checking socket with status... [10/13/17 01:04:28.332][DEBUG] [PHD2 Listener Thread] Checking PHD2 state... [10/13/17 01:04:28.332][DEBUG] [PHD2 Listener Thread] PHD2 GetPhdStatus - Pre-Wait : Stopped [10/13/17 01:04:28.332][DEBUG] [PHD2 Listener Thread] Sending to PHD2: {"method": "get_app_state", "id": 1001} [10/13/17 01:04:28.332][DEBUG] [PHD2 Listener Thread] PHD2 GetPhdStatus - Post-Wait: Stopped [10/13/17 01:04:37.202][DEBUG] [Telescope Thread] Telescope: Settling has completed [10/13/17 01:04:37.202][DEBUG] [Telescope Thread] Auto center slew complete... [10/13/17 01:04:37.202][DEBUG] [Telescope Thread] Performing auto center step 4... [10/13/17 01:04:37.202][DEBUG] [Telescope Thread] Created full file name (file does not exist): C:\Users\WinAstro\AppData\Local\SequenceGenerator\Temp\plate_solve_image.fit [10/13/17 01:04:37.214][DEBUG] [Camera Thread] SGM_CAMERA_PLATE_SOLVER_CAPTURE message received... [10/13/17 01:04:37.216][DEBUG] [Camera Thread] Collecting FITs headers for plate solve frame... [10/13/17 01:04:37.216][DEBUG] [Camera Thread] Collecting FITs headers for plate solve frame... [10/13/17 01:04:37.351][DEBUG] [Camera Thread] SetAscomHighSpeed... [10/13/17 01:04:37.351][DEBUG] [Camera Thread] Cannot set readout speed, not supported by camera... [10/13/17 01:04:43.261][DEBUG] [Camera Thread] Created full file name (file does not exist): C:\Users\WinAstro\AppData\Local\SequenceGenerator\Temp\plate_solve_image.fit [10/13/17 01:04:43.261][DEBUG] [Camera Thread] SaveFileAscom: Start... [10/13/17 01:04:43.261][DEBUG] [Camera Thread] SaveFileAscom: Checking image data... [10/13/17 01:04:43.262][DEBUG] [Camera Thread] SaveFileAscom: Create normal preview bitmap... [10/13/17 01:04:43.265][DEBUG] [Camera Thread] SaveFileAscom: Locking preview bits... [10/13/17 01:04:43.265][DEBUG] [Camera Thread] SaveFileAscom: Validating file name... [10/13/17 01:04:43.265][DEBUG] [Camera Thread] SaveFileAscom: Starting byte traversal... [10/13/17 01:04:43.336][DEBUG] [Camera Thread] SaveFileAscom: Unlocking preview bits... [10/13/17 01:04:43.336][DEBUG] [Camera Thread] SaveFileAscom: Saving preview bitmap to disk... [10/13/17 01:04:43.336][DEBUG] [Camera Thread] SaveFileBmp16: Locking bitmap for disk write... [10/13/17 01:04:43.336][DEBUG] [Camera Thread] SaveFileBmp16: Opening file stream... [10/13/17 01:04:43.336][DEBUG] [Camera Thread] SaveFileBmp16: Writing FITS headers... [10/13/17 01:04:43.337][DEBUG] [Camera Thread] SaveFileBmp16: Traversing and persisting bitmap data... [10/13/17 01:04:43.406][DEBUG] [Camera Thread] SaveFileBmp16: FITS block fill... [10/13/17 01:04:43.406][DEBUG] [Camera Thread] SaveFileBmp16: Unlocking bitmap... [10/13/17 01:04:43.406][DEBUG] [Camera Thread] SaveFileBmp16: Closing file stream [10/13/17 01:04:43.412][DEBUG] [Camera Thread] Internal Interface: Set Preview... [10/13/17 01:04:43.412][DEBUG] [Camera Thread] Display image preview using asynch task... [10/13/17 01:04:43.909][DEBUG] [Camera Thread] SaveFileAscom: Done [10/13/17 01:04:43.909][DEBUG] [Camera Thread] =========== Save file took 648 ms [10/13/17 01:04:43.909][DEBUG] [Camera Thread] SGM_CAMERA_PLATE_SOLVER_CAPTURE complete... [10/13/17 01:04:44.097][DEBUG] [Telescope Thread] Auto center verification frame complete. Plate solving image C:\Users\WinAstro\AppData\Local\SequenceGenerator\Temp\plate_solve_image.fit [10/13/17 01:04:44.239][DEBUG] [Telescope Thread] ************* SOLVE HINTS **************** [10/13/17 01:04:44.239][DEBUG] [Telescope Thread] SOLVER: PlateSolve2 [10/13/17 01:04:44.239][DEBUG] [Telescope Thread] BLIND: False [10/13/17 01:04:44.239][DEBUG] [Telescope Thread] METHOD: Max Regions [10/13/17 01:04:44.239][DEBUG] [Telescope Thread] RA: 0.715522335060135 [10/13/17 01:04:44.239][DEBUG] [Telescope Thread] DEC: -21.0624083644851 [10/13/17 01:04:44.239][DEBUG] [Telescope Thread] SCALE: 2.62951 [10/13/17 01:04:44.239][DEBUG] [Telescope Thread] ****************************************** [10/13/17 01:04:44.256][DEBUG] [Telescope Thread] FitsFileHeaderData: Angle - 0 [10/13/17 01:04:44.256][DEBUG] [Telescope Thread] FitsFileHeaderData: Scale - 0 [10/13/17 01:04:44.256][DEBUG] [Telescope Thread] FitsFileHeaderData: RA - 0.71549513757406 [10/13/17 01:04:44.256][DEBUG] [Telescope Thread] FitsFileHeaderData: DEC - -21.0623655834617 [10/13/17 01:04:44.260][DEBUG] [Telescope Thread] PlateSove2 Param: RA (RAD) - 0.187323309275361 [10/13/17 01:04:44.260][DEBUG] [Telescope Thread] PlateSove2 Param: DEC (RAD) - -0.367608374359859 [10/13/17 01:04:44.260][DEBUG] [Telescope Thread] PlateSove2 Param: Width - 2328 [10/13/17 01:04:44.260][DEBUG] [Telescope Thread] PlateSove2 Param: Height - 1760 [10/13/17 01:04:44.260][DEBUG] [Telescope Thread] PlateSolve2 Command Line: [10/13/17 01:04:44.260][DEBUG] [Telescope Thread] C:\Users\WinAstro\AppData\Local\SequenceGenerator\\PlateSolve2.exe 0.18732330927536,-0.36760837435986,0.02967786599846,0.02243687463801,3000,C:\Users\WinAstro\AppData\Local\SequenceGenerator\\Temp\psXSolve_12.fit [10/13/17 01:04:56.780][DEBUG] [Telescope Thread] *********** SUCCESSFUL SOLVE ************* [10/13/17 01:04:56.780][DEBUG] [Telescope Thread] SOLVER: False [10/13/17 01:04:56.780][DEBUG] [Telescope Thread] SUCCESS: True [10/13/17 01:04:56.780][DEBUG] [Telescope Thread] CONF: 100 [10/13/17 01:04:56.780][DEBUG] [Telescope Thread] BLIND: False [10/13/17 01:04:56.780][DEBUG] [Telescope Thread] RA: 0.86385622174757 [10/13/17 01:04:56.780][DEBUG] [Telescope Thread] DEC: -20.9549928520414 [10/13/17 01:04:56.780][DEBUG] [Telescope Thread] SCALE: 2.63001 [10/13/17 01:04:56.780][DEBUG] [Telescope Thread] FLIPPED: False [10/13/17 01:04:56.780][DEBUG] [Telescope Thread] ANGLE (EON): 83.44 [10/13/17 01:04:56.780][DEBUG] [Telescope Thread] MSG: Valid solve. [10/13/17 01:04:56.780][DEBUG] [Telescope Thread] ****************************************** [10/13/17 01:04:56.782][DEBUG] [Telescope Thread] Checking to see if solve might be bad... [10/13/17 01:04:56.915][DEBUG] [Telescope Thread] Solve appears to be good... [10/13/17 01:04:56.915][DEBUG] [Telescope Thread] Auto center validation frame solved successfully... [10/13/17 01:04:56.915][DEBUG] [Telescope Thread] Telescope: Syncing to J2000 RA: 0.86385622174757 Dec: -20.9549928520414 [10/13/17 01:04:56.915][DEBUG] [Telescope Thread] Telescope: Sync behavior set to "Sync"... [10/13/17 01:04:56.916][DEBUG] [Telescope Thread] Telescope: Sync Passed in J2000 but mount requires JNOW, converting... [10/13/17 01:04:56.916][DEBUG] [Telescope Thread] Telescope: Syncing to JNOW RA: 0.878607065555778 Dec: -20.858606438605 [10/13/17 01:04:57.254][DEBUG] [Telescope Thread] Attempting to write fits header info for C:\Users\WinAstro\AppData\Local\SequenceGenerator\Temp\plate_solve_image.fit [10/13/17 01:04:57.254][DEBUG] [Telescope Thread] Opening fits file... [10/13/17 01:04:57.255][DEBUG] [Telescope Thread] Successfully opened fits file... [10/13/17 01:04:57.255][DEBUG] [Telescope Thread] Writing fits headers... [10/13/17 01:04:57.255][DEBUG] [Telescope Thread] Closing fits file [10/13/17 01:04:57.255][DEBUG] [Telescope Thread] Could not sync the rotator to 83.44 degrees (not connected)! [10/13/17 01:04:57.256][DEBUG] [Telescope Thread] Auto center complete... [10/13/17 01:04:57.493][DEBUG] [Center Scope Thread] Retrying auto center. Total Error > Allowable error: 7046.5 > 100.0 [10/13/17 01:04:57.493][DEBUG] [Center Scope Thread] RA Error: -7043.7 [10/13/17 01:04:57.493][DEBUG] [Center Scope Thread] DEC Error: -199.7 [10/13/17 01:04:57.503][DEBUG] [Telescope Thread] Center telescope message received... [10/13/17 01:04:57.503][DEBUG] [Telescope Thread] Solving with Plate Solver PlateSolve2... [10/13/17 01:04:57.750][DEBUG] [Center Scope Thread] Error in auto center update thread, Subproceso anulado. [10/13/17 01:04:57.757][DEBUG] [Telescope Thread] Setting filter for auto center... [10/13/17 01:04:57.758][DEBUG] [Telescope Thread] Setting filter position 1... [10/13/17 01:04:57.758][DEBUG] [Telescope Thread] Filter position 1 is already set. Skipping... [10/13/17 01:04:57.759][DEBUG] [Telescope Thread] Performing auto center step 1... [10/13/17 01:04:57.759][DEBUG] [Telescope Thread] Skipping step 1... [10/13/17 01:04:57.759][DEBUG] [Telescope Thread] Auto center reference frame solved successfully... [10/13/17 01:04:57.759][DEBUG] [Telescope Thread] Performing auto center step 3 (scope)... [10/13/17 01:04:57.759][DEBUG] [Telescope Thread] Auto center slewing scope to match reference... [10/13/17 01:04:57.762][DEBUG] [Telescope Thread] Telescope: Slewing to J2000 RA: 0.692328968083969 (00h41m32.38s) Dec: -21.0279252227414 (-21°01'40.53") [10/13/17 01:04:57.762][DEBUG] [Telescope Thread] Telescope: Slew received J2000 coordinates, mount requires JNOW, converting... [10/13/17 01:04:57.763][DEBUG] [Telescope Thread] Telescope: Slewing to JNOW RA: 0.707183789210335 Dec: -20.9306460056944 [10/13/17 01:05:19.331][DEBUG] [Main Thread] PopulateDataModel: Transferring view to the data model... [10/13/17 01:05:19.342][DEBUG] [MF Update Thread] Performing serialize... [10/13/17 01:05:28.486][DEBUG] [PHD2 Listener Thread] PHD2 - No messages received from PHD2 for 1 minute, checking socket with status... [10/13/17 01:05:28.486][DEBUG] [PHD2 Listener Thread] Checking PHD2 state... [10/13/17 01:05:28.486][DEBUG] [PHD2 Listener Thread] PHD2 GetPhdStatus - Pre-Wait : Stopped [10/13/17 01:05:28.486][DEBUG] [PHD2 Listener Thread] Sending to PHD2: {"method": "get_app_state", "id": 1001} [10/13/17 01:05:28.486][DEBUG] [PHD2 Listener Thread] PHD2 GetPhdStatus - Post-Wait: Stopped [10/13/17 01:05:39.280][DEBUG] [Telescope Thread] Scope reports it is done with synchronous slew, verifying... [10/13/17 01:05:39.281][DEBUG] [Telescope Thread] Telescope: Slewing has completed [10/13/17 01:05:39.281][DEBUG] [Telescope Thread] Telescope: Settling for 30 seconds [10/13/17 01:06:09.283][DEBUG] [Telescope Thread] Telescope: Settling has completed [10/13/17 01:06:09.283][DEBUG] [Telescope Thread] Auto center slew complete... [10/13/17 01:06:09.283][DEBUG] [Telescope Thread] Performing auto center step 4... [10/13/17 01:06:09.283][DEBUG] [Telescope Thread] Created full file name (file does not exist): C:\Users\WinAstro\AppData\Local\SequenceGenerator\Temp\plate_solve_image.fit [10/13/17 01:06:09.309][DEBUG] [Camera Thread] SGM_CAMERA_PLATE_SOLVER_CAPTURE message received... [10/13/17 01:06:09.309][DEBUG] [Camera Thread] Collecting FITs headers for plate solve frame... [10/13/17 01:06:09.309][DEBUG] [Camera Thread] Collecting FITs headers for plate solve frame... [10/13/17 01:06:09.449][DEBUG] [Camera Thread] SetAscomHighSpeed... [10/13/17 01:06:09.450][DEBUG] [Camera Thread] Cannot set readout speed, not supported by camera... [10/13/17 01:06:15.382][DEBUG] [Camera Thread] Created full file name (file does not exist): C:\Users\WinAstro\AppData\Local\SequenceGenerator\Temp\plate_solve_image.fit [10/13/17 01:06:15.382][DEBUG] [Camera Thread] SaveFileAscom: Start... [10/13/17 01:06:15.382][DEBUG] [Camera Thread] SaveFileAscom: Checking image data... [10/13/17 01:06:15.382][DEBUG] [Camera Thread] SaveFileAscom: Create normal preview bitmap... [10/13/17 01:06:15.386][DEBUG] [Camera Thread] SaveFileAscom: Locking preview bits... [10/13/17 01:06:15.386][DEBUG] [Camera Thread] SaveFileAscom: Validating file name... [10/13/17 01:06:15.386][DEBUG] [Camera Thread] SaveFileAscom: Starting byte traversal... [10/13/17 01:06:15.446][DEBUG] [Camera Thread] SaveFileAscom: Unlocking preview bits... [10/13/17 01:06:15.446][DEBUG] [Camera Thread] SaveFileAscom: Saving preview bitmap to disk... [10/13/17 01:06:15.446][DEBUG] [Camera Thread] SaveFileBmp16: Locking bitmap for disk write... [10/13/17 01:06:15.446][DEBUG] [Camera Thread] SaveFileBmp16: Opening file stream... [10/13/17 01:06:15.447][DEBUG] [Camera Thread] SaveFileBmp16: Writing FITS headers... [10/13/17 01:06:15.447][DEBUG] [Camera Thread] SaveFileBmp16: Traversing and persisting bitmap data... [10/13/17 01:06:15.509][DEBUG] [Camera Thread] SaveFileBmp16: FITS block fill... [10/13/17 01:06:15.509][DEBUG] [Camera Thread] SaveFileBmp16: Unlocking bitmap... [10/13/17 01:06:15.509][DEBUG] [Camera Thread] SaveFileBmp16: Closing file stream [10/13/17 01:06:15.515][DEBUG] [Camera Thread] Internal Interface: Set Preview... [10/13/17 01:06:15.515][DEBUG] [Camera Thread] Display image preview using asynch task... [10/13/17 01:06:15.964][DEBUG] [Camera Thread] SaveFileAscom: Done [10/13/17 01:06:15.964][DEBUG] [Camera Thread] =========== Save file took 582 ms [10/13/17 01:06:15.964][DEBUG] [Camera Thread] SGM_CAMERA_PLATE_SOLVER_CAPTURE complete... [10/13/17 01:06:16.099][DEBUG] [Telescope Thread] Auto center verification frame complete. Plate solving image C:\Users\WinAstro\AppData\Local\SequenceGenerator\Temp\plate_solve_image.fit [10/13/17 01:06:16.256][DEBUG] [Telescope Thread] ************* SOLVE HINTS **************** [10/13/17 01:06:16.256][DEBUG] [Telescope Thread] SOLVER: PlateSolve2 [10/13/17 01:06:16.256][DEBUG] [Telescope Thread] BLIND: False [10/13/17 01:06:16.256][DEBUG] [Telescope Thread] METHOD: Max Regions [10/13/17 01:06:16.256][DEBUG] [Telescope Thread] RA: 0.716114932364455 [10/13/17 01:06:16.256][DEBUG] [Telescope Thread] DEC: -21.0624054840031 [10/13/17 01:06:16.256][DEBUG] [Telescope Thread] SCALE: 2.63001 [10/13/17 01:06:16.256][DEBUG] [Telescope Thread] ****************************************** [10/13/17 01:06:16.269][DEBUG] [Telescope Thread] PlateSove2 Param: RA (RAD) - 0.187478450886844 [10/13/17 01:06:16.269][DEBUG] [Telescope Thread] PlateSove2 Param: DEC (RAD) - -0.367608324085964 [10/13/17 01:06:16.269][DEBUG] [Telescope Thread] PlateSove2 Param: Width - 2328 [10/13/17 01:06:16.269][DEBUG] [Telescope Thread] PlateSove2 Param: Height - 1760 [10/13/17 01:06:16.269][DEBUG] [Telescope Thread] PlateSolve2 Command Line: [10/13/17 01:06:16.269][DEBUG] [Telescope Thread] C:\Users\WinAstro\AppData\Local\SequenceGenerator\\PlateSolve2.exe 0.18747845088684,-0.36760832408596,0.02968350922971,0.02244114099841,3000,C:\Users\WinAstro\AppData\Local\SequenceGenerator\\Temp\psXSolve_13.fit [10/13/17 01:06:18.776][DEBUG] [Telescope Thread] *********** SUCCESSFUL SOLVE ************* [10/13/17 01:06:18.776][DEBUG] [Telescope Thread] SOLVER: False [10/13/17 01:06:18.776][DEBUG] [Telescope Thread] SUCCESS: True [10/13/17 01:06:18.776][DEBUG] [Telescope Thread] CONF: 107 [10/13/17 01:06:18.776][DEBUG] [Telescope Thread] BLIND: False [10/13/17 01:06:18.776][DEBUG] [Telescope Thread] RA: 0.693669727521762 [10/13/17 01:06:18.776][DEBUG] [Telescope Thread] DEC: -21.0326017042653 [10/13/17 01:06:18.776][DEBUG] [Telescope Thread] SCALE: 2.63044 [10/13/17 01:06:18.776][DEBUG] [Telescope Thread] FLIPPED: False [10/13/17 01:06:18.776][DEBUG] [Telescope Thread] ANGLE (EON): 83.13 [10/13/17 01:06:18.776][DEBUG] [Telescope Thread] MSG: Valid solve. [10/13/17 01:06:18.776][DEBUG] [Telescope Thread] ****************************************** [10/13/17 01:06:18.776][DEBUG] [Telescope Thread] Checking to see if solve might be bad... [10/13/17 01:06:18.912][DEBUG] [Telescope Thread] Solve appears to be good... [10/13/17 01:06:18.912][DEBUG] [Telescope Thread] Auto center validation frame solved successfully... [10/13/17 01:06:18.912][DEBUG] [Telescope Thread] Telescope: Syncing to J2000 RA: 0.693669727521762 Dec: -21.0326017042653 [10/13/17 01:06:18.912][DEBUG] [Telescope Thread] Telescope: Sync behavior set to "Sync"... [10/13/17 01:06:18.912][DEBUG] [Telescope Thread] Telescope: Sync Passed in J2000 but mount requires JNOW, converting... [10/13/17 01:06:18.913][DEBUG] [Telescope Thread] Telescope: Syncing to JNOW RA: 0.708523608417687 Dec: -20.9353289107526 [10/13/17 01:06:19.250][DEBUG] [Telescope Thread] Attempting to write fits header info for C:\Users\WinAstro\AppData\Local\SequenceGenerator\Temp\plate_solve_image.fit [10/13/17 01:06:19.250][DEBUG] [Telescope Thread] Opening fits file... [10/13/17 01:06:19.251][DEBUG] [Telescope Thread] Successfully opened fits file... [10/13/17 01:06:19.251][DEBUG] [Telescope Thread] Writing fits headers... [10/13/17 01:06:19.251][DEBUG] [Telescope Thread] Closing fits file [10/13/17 01:06:19.251][DEBUG] [Telescope Thread] Could not sync the rotator to 83.13 degrees (not connected)! [10/13/17 01:06:19.252][DEBUG] [Telescope Thread] Auto center complete... [10/13/17 01:06:19.385][DEBUG] [Center Scope Thread] Automatic Auto Center Success - Total Error <= Allowable error: 56.5 <= 100.0 [10/13/17 01:06:19.385][DEBUG] [Center Scope Thread] RA Error: -55.0 [10/13/17 01:06:19.385][DEBUG] [Center Scope Thread] DEC Error: 12.8 [10/13/17 01:06:19.643][DEBUG] [Pier Flip Thread] Meridian Flip: Auto guider resuming [10/13/17 01:06:19.645][DEBUG] [Pier Flip Thread] PHD2: Auto Resume [10/13/17 01:06:19.645][DEBUG] [Pier Flip Thread] Checking PHD2 state... [10/13/17 01:06:19.645][DEBUG] [Pier Flip Thread] PHD2 GetPhdStatus - Pre-Wait : Stopped [10/13/17 01:06:19.645][DEBUG] [Pier Flip Thread] Sending to PHD2: {"method": "get_app_state", "id": 1001} [10/13/17 01:06:19.747][DEBUG] [Pier Flip Thread] PHD2 GetPhdStatus - Post-Wait: Stopped [10/13/17 01:06:20.747][DEBUG] [Pier Flip Thread] Checking PHD2 state... [10/13/17 01:06:20.747][DEBUG] [Pier Flip Thread] PHD2 GetPhdStatus - Pre-Wait : Stopped [10/13/17 01:06:20.747][DEBUG] [Pier Flip Thread] Sending to PHD2: {"method": "get_app_state", "id": 1001} [10/13/17 01:06:20.848][DEBUG] [Pier Flip Thread] PHD2 GetPhdStatus - Post-Wait: Stopped [10/13/17 01:06:21.848][DEBUG] [Pier Flip Thread] Checking PHD2 state... [10/13/17 01:06:21.848][DEBUG] [Pier Flip Thread] PHD2 GetPhdStatus - Pre-Wait : Stopped [10/13/17 01:06:21.848][DEBUG] [Pier Flip Thread] Sending to PHD2: {"method": "get_app_state", "id": 1001} [10/13/17 01:06:21.949][DEBUG] [Pier Flip Thread] PHD2 GetPhdStatus - Post-Wait: Stopped [10/13/17 01:06:22.950][DEBUG] [Pier Flip Thread] Checking PHD2 state... [10/13/17 01:06:22.950][DEBUG] [Pier Flip Thread] PHD2 GetPhdStatus - Pre-Wait : Stopped [10/13/17 01:06:22.950][DEBUG] [Pier Flip Thread] Sending to PHD2: {"method": "get_app_state", "id": 1001} [10/13/17 01:06:23.051][DEBUG] [Pier Flip Thread] PHD2 GetPhdStatus - Post-Wait: Stopped [10/13/17 01:06:24.052][DEBUG] [Pier Flip Thread] Checking PHD2 state... [10/13/17 01:06:24.052][DEBUG] [Pier Flip Thread] PHD2 GetPhdStatus - Pre-Wait : Stopped [10/13/17 01:06:24.052][DEBUG] [Pier Flip Thread] Sending to PHD2: {"method": "get_app_state", "id": 1001} [10/13/17 01:06:24.152][DEBUG] [Pier Flip Thread] PHD2 GetPhdStatus - Post-Wait: Stopped [10/13/17 01:06:24.152][DEBUG] [Pier Flip Thread] {"method": "guide", "params": [{"pixels": 5, "time": 0, "timeout": 600}, false ], "id": 1003} [10/13/17 01:06:24.152][DEBUG] [Pier Flip Thread] Sending to PHD2: {"method": "guide", "params": [{"pixels": 5, "time": 0, "timeout": 600}, false ], "id": 1003} [10/13/17 01:06:24.152][DEBUG] [Pier Flip Thread] PHD2: Attempting to start guiding, waiting for PHD2 settle done message... [10/13/17 01:06:29.564][DEBUG] [PHD2 Listener Thread] PHD2: Settle done received: GOOD [10/13/17 01:06:30.155][DEBUG] [Pier Flip Thread] Checking PHD2 state... [10/13/17 01:06:30.155][DEBUG] [Pier Flip Thread] PHD2 GetPhdStatus - Pre-Wait : Stopped [10/13/17 01:06:30.155][DEBUG] [Pier Flip Thread] Sending to PHD2: {"method": "get_app_state", "id": 1001} [10/13/17 01:06:30.256][DEBUG] [Pier Flip Thread] PHD2 GetPhdStatus - Post-Wait: Guiding [10/13/17 01:06:30.256][DEBUG] [Pier Flip Thread] PHD2 settle successful... [10/13/17 01:06:30.256][DEBUG] [Pier Flip Thread] Meridian Flip: Auto guider resuming has completed [10/13/17 01:06:40.749][DEBUG] [Main Thread] PopulateDataModel: Transferring view to the data model... [10/13/17 01:06:40.767][DEBUG] [MF Update Thread] Performing serialize... [10/13/17 01:06:59.743][DEBUG] [Sequence Thread] Meridian Flip successful [10/13/17 01:06:59.743][DEBUG] [Sequence Thread] EventMarker 3 - t:NGC 253 (1); e:0; f:18; o: [10/13/17 01:06:59.743][DEBUG] [Sequence Thread] EventMarker 4 - t:NGC 253 (1); e:0; f:18; o: [10/13/17 01:06:59.743][DEBUG] [Sequence Thread] Setting filter position 1... [10/13/17 01:06:59.743][DEBUG] [Sequence Thread] Filter position 1 is already set. Skipping... [10/13/17 01:06:59.743][DEBUG] [Sequence Thread] EventMarker 5 - t:NGC 253 (1); e:0; f:18; o: [10/13/17 01:06:59.743][DEBUG] [Sequence Thread] Checking for auto manual focus (pre)... [10/13/17 01:06:59.743][DEBUG] [Sequence Thread] EventMarker 6 - t:NGC 253 (1); e:0; f:18; o: [10/13/17 01:06:59.743][DEBUG] [Sequence Thread] Created base name for frame capture: Light_NGC 253_Lum_120sec_-15C_1x1_2017-10-13_frame19 [10/13/17 01:06:59.744][DEBUG] [Sequence Thread] Created directory for frame capture: C:\Users\WinAstro\Documents\SGP\NGC 253\Flats\ [10/13/17 01:06:59.744][DEBUG] [Pier Flip Thread] Meridian Flip: Procedure complete [10/13/17 01:06:59.744][DEBUG] [Sequence Thread] EventMarker 1 - t:NGC 253 (1); e:0; f:18; o: [10/13/17 01:06:59.745][DEBUG] [Sequence Thread] EventMarker 7 - t:NGC 253 (1); e:0; f:18; o: [10/13/17 01:06:59.745][DEBUG] [Sequence Thread] Resuming auto guiding (settling)... [10/13/17 01:06:59.745][DEBUG] [Sequence Thread] Checking PHD2 state... [10/13/17 01:06:59.745][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding [10/13/17 01:06:59.745][DEBUG] [Sequence Thread] Sending to PHD2: {"method": "get_app_state", "id": 1001} [10/13/17 01:06:59.846][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding [10/13/17 01:06:59.846][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state [10/13/17 01:06:59.846][DEBUG] [Sequence Thread] {"method": "guide", "params": [{"pixels": 5, "time": 0, "timeout": 600}, false ], "id": 1003} [10/13/17 01:06:59.846][DEBUG] [Sequence Thread] Sending to PHD2: {"method": "guide", "params": [{"pixels": 5, "time": 0, "timeout": 600}, false ], "id": 1003} [10/13/17 01:06:59.846][DEBUG] [Sequence Thread] Checking PHD2 state... [10/13/17 01:06:59.846][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding [10/13/17 01:06:59.846][DEBUG] [Sequence Thread] Sending to PHD2: {"method": "get_app_state", "id": 1001} [10/13/17 01:06:59.947][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding [10/13/17 01:06:59.947][DEBUG] [Sequence Thread] User has elected to skip guider settling over time... [10/13/17 01:06:59.947][DEBUG] [Sequence Thread] Waiting for Auto Guider distance to fall below 5 [10/13/17 01:06:59.947][DEBUG] [Sequence Thread] PHD2 distance request... [10/13/17 01:06:59.947][DEBUG] [Sequence Thread] PHD2 distance request returned 4.8... [10/13/17 01:06:59.952][DEBUG] [Sequence Thread] Distance is below 5, starting timer... [10/13/17 01:07:00.453][DEBUG] [Sequence Thread] PHD2 distance request... [10/13/17 01:07:00.453][DEBUG] [Sequence Thread] PHD2 distance request returned 4.8... [10/13/17 01:07:00.464][DEBUG] [Sequence Thread] Distance stayed below 5 for 0 seconds, done settling... [10/13/17 01:07:00.465][DEBUG] [Sequence Thread] Auto guider has settled... [10/13/17 01:07:00.467][DEBUG] [Sequence Thread] EventMarker 8 - t:NGC 253 (1); e:0; f:18; o: [10/13/17 01:07:00.467][DEBUG] [Sequence Thread] EventMarker 9 - t:NGC 253 (1); e:0; f:18; o: [10/13/17 01:07:00.467][DEBUG] [Sequence Thread] EventMarker 10 - t:NGC 253 (1); e:0; f:18; o: [10/13/17 01:07:00.467][DEBUG] [Sequence Thread] Finished sending frame capture. Entering wait mode... [10/13/17 01:07:00.467][DEBUG] [Sequence Thread] EventMarker 11 - t:NGC 253 (1); e:0; f:18; o: [10/13/17 01:07:00.467][DEBUG] [Sequence Thread] EventMarker 12 - t:NGC 253 (1); e:0; f:18; o: [10/13/17 01:07:00.469][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE message received... [10/13/17 01:07:00.469][DEBUG] [Sequence Thread] EventMarker 13 - t:NGC 253 (1); e:0; f:18; o: [10/13/17 01:07:00.472][DEBUG] [Camera Thread] SetAscomNormalSpeed... [10/13/17 01:07:00.472][DEBUG] [Camera Thread] Cannot set readout speed, not supported by camera... [10/13/17 01:07:39.303][DEBUG] [PHD2 Listener Thread] Unknown object from PHD2: {"Event":"Alert","Timestamp":1507867659.262,"Host":"ASTROWIN","Inst":1,"Msg":"Your Max Dec Duration setting is preventing PHD from making adequate corrections to keep the guide star locked. Increase the Max Dec Duration setting to allow PHD2 to make the needed corrections.","Type":"warning"} [10/13/17 01:08:12.563][DEBUG] [PHD2 Listener Thread] Unknown object from PHD2: {"Event":"Alert","Timestamp":1507867692.550,"Host":"ASTROWIN","Inst":1,"Msg":"Your Max RA Duration setting is preventing PHD from making adequate corrections to keep the guide star locked. Increase the Max RA Duration setting to allow PHD2 to make the needed corrections.","Type":"warning"} [10/13/17 01:08:45.072][DEBUG] [PHD2 Listener Thread] Unknown object from PHD2: {"Event":"Alert","Timestamp":1507867725.068,"Host":"ASTROWIN","Inst":1,"Msg":"Your Max Dec Duration setting is preventing PHD from making adequate corrections to keep the guide star locked. Increase the Max Dec Duration setting to allow PHD2 to make the needed corrections.","Type":"warning"} [10/13/17 01:09:00.545][DEBUG] [Sequence Thread] EventMarker 15 - t:NGC 253 (1); e:0; f:18; o: [10/13/17 01:09:00.548][DEBUG] [Sequence Thread] Waking from exposure time sleep period... [10/13/17 01:09:00.548][DEBUG] [Sequence Thread] Checking to see if the CCD has a temp... [10/13/17 01:09:00.548][DEBUG] [Sequence Thread] Saving the CCD temp... [10/13/17 01:09:00.553][DEBUG] [Sequence Thread] Entering super dangerous loop to await image completion... [10/13/17 01:09:00.555][DEBUG] [Sequence Thread] EventMarker 16 - t:NGC 253 (1); e:0; f:18; o: [10/13/17 01:09:02.935][DEBUG] [Camera Thread] SGM_CAMERA_CAPTURE complete... [10/13/17 01:09:03.060][DEBUG] [Sequence Thread] EventMarker 17 - t:NGC 253 (1); e:0; f:18; o: [10/13/17 01:09:03.060][DEBUG] [Sequence Thread] Image reported as complete. Continuing... [10/13/17 01:09:03.186][DEBUG] [Sequence Thread] Collecting FITs headers... [10/13/17 01:09:03.187][DEBUG] [Sequence Thread] ASCOM Camera: Could not get last exposure start time. Reported as (unknown) [10/13/17 01:09:03.187][DEBUG] [Sequence Thread] DATE-LOC time provided by SGPro (failed to retrieve valid entry from camera)... [10/13/17 01:09:03.245][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info for last solve... [10/13/17 01:09:03.245][DEBUG] [Sequence Thread] GatherFitsHeaders: Writing header info from UI... [10/13/17 01:09:03.245][DEBUG] [Sequence Thread] Clearing timed monitoring events... [10/13/17 01:09:03.247][DEBUG] [Sequence Thread] Created full file name (file does not exist): C:\Users\WinAstro\Documents\SGP\NGC 253\Flats\Light_NGC 253_Lum_120sec_-15C_1x1_2017-10-13_frame19.fit [10/13/17 01:09:03.247][DEBUG] [Sequence Thread] SaveFileAscom: Start... [10/13/17 01:09:03.247][DEBUG] [Sequence Thread] SaveFileAscom: Checking image data... [10/13/17 01:09:03.247][DEBUG] [Sequence Thread] SaveFileAscom: Create normal preview bitmap... [10/13/17 01:09:03.260][DEBUG] [Sequence Thread] SaveFileAscom: Locking preview bits... [10/13/17 01:09:03.260][DEBUG] [Sequence Thread] SaveFileAscom: Validating file name... [10/13/17 01:09:03.260][DEBUG] [Sequence Thread] SaveFileAscom: Starting byte traversal... [10/13/17 01:09:03.457][DEBUG] [Sequence Thread] SaveFileAscom: Unlocking preview bits... [10/13/17 01:09:03.457][DEBUG] [Sequence Thread] SaveFileAscom: Saving preview bitmap to disk... [10/13/17 01:09:03.457][DEBUG] [Sequence Thread] SaveFileBmp16: Locking bitmap for disk write... [10/13/17 01:09:03.457][DEBUG] [Sequence Thread] SaveFileBmp16: Opening file stream... [10/13/17 01:09:04.850][DEBUG] [Sequence Thread] SaveFileBmp16: Writing FITS headers... [10/13/17 01:09:04.851][DEBUG] [Sequence Thread] SaveFileBmp16: Traversing and persisting bitmap data... [10/13/17 01:09:05.178][DEBUG] [Sequence Thread] SaveFileBmp16: FITS block fill... [10/13/17 01:09:05.178][DEBUG] [Sequence Thread] SaveFileBmp16: Unlocking bitmap... [10/13/17 01:09:05.178][DEBUG] [Sequence Thread] SaveFileBmp16: Closing file stream [10/13/17 01:09:05.188][DEBUG] [Sequence Thread] SaveFileAscom: Displaying image preview in UI... [10/13/17 01:09:05.188][DEBUG] [Sequence Thread] Internal Interface: Set Preview... [10/13/17 01:09:05.188][DEBUG] [Sequence Thread] Display image preview using asynch task... [10/13/17 01:09:06.774][DEBUG] [Sequence Thread] SaveFileAscom: Done [10/13/17 01:09:06.774][DEBUG] [Sequence Thread] =========== Save file took 3528 ms [10/13/17 01:09:06.792][DEBUG] [Sequence Thread] Resuming auto guiding (settling)... [10/13/17 01:09:06.792][DEBUG] [Sequence Thread] Checking PHD2 state... [10/13/17 01:09:06.792][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding [10/13/17 01:09:06.792][DEBUG] [Sequence Thread] Sending to PHD2: {"method": "get_app_state", "id": 1001} [10/13/17 01:09:06.893][DEBUG] [Sequence Thread] PHD2 GetPhdStatus - Post-Wait: Guiding [10/13/17 01:09:06.893][DEBUG] [Sequence Thread] PHD2: Requested unpause, but PHD2 reports it is not in a paused state [10/13/17 01:09:07.038][DEBUG] [Sequence Thread] EventMarker 18 - t:NGC 253 (1); e:0; f:18; o: [10/13/17 01:09:07.043][DEBUG] [Sequence Thread] EventMarker 19 - t:NGC 253 (1); e:0; f:19; o: [10/13/17 01:09:07.043][DEBUG] [Sequence Thread] EventMarker 20 - t:NGC 253 (1); e:0; f:19; o: [10/13/17 01:09:07.043][DEBUG] [Sequence Thread] Running post event... [10/13/17 01:09:07.044][DEBUG] [Sequence Thread] EventMarker 21 - t:NGC 253 (1); e:0; f:19; o: [10/13/17 01:09:07.047][DEBUG] [Sequence Thread] Incremented numComplete (19) for event[0]... [10/13/17 01:09:07.051][DEBUG] [Sequence Thread] Attempting to find next event... [10/13/17 01:09:07.051][DEBUG] [Sequence Thread] Current event[0] frame count: 19/100... [10/13/17 01:09:07.051][DEBUG] [Sequence Thread] Looking at event[1]... [10/13/17 01:09:07.051][DEBUG] [Sequence Thread] Found event event[1] with remaining frames. [10/13/17 01:09:07.051][DEBUG] [Sequence Thread] Event[1] frame count: 17/50... [10/13/17 01:09:07.051][DEBUG] [Sequence Thread] Getting next event (1)... [10/13/17 01:09:07.051][DEBUG] [Sequence Thread] Checking for auto manual focus (post)... [10/13/17 01:09:07.052][DEBUG] [Main Thread] PopulateDataModel: Transferring view to the data model... [10/13/17 01:09:07.068][DEBUG] [Sequence Thread] Attempting to move to next event... [10/13/17 01:09:07.068][DEBUG] [Sequence Thread] Attempting to find next event... [10/13/17 01:09:07.068][DEBUG] [Sequence Thread] Current event[0] frame count: 19/100... [10/13/17 01:09:07.068][DEBUG] [Sequence Thread] Looking at event[1]... [10/13/17 01:09:07.068][DEBUG] [Sequence Thread] Found event event[1] with remaining frames. [10/13/17 01:09:07.068][DEBUG] [Sequence Thread] Event[1] frame count: 17/50... [10/13/17 01:09:07.068][DEBUG] [Sequence Thread] Getting next event (1)... [10/13/17 01:09:07.068][DEBUG] [Sequence Thread] Running pre event... [10/13/17 01:09:07.104][DEBUG] [Sequence Thread] Current target has end time at 10/13/2017 3:00:00 AM [10/13/17 01:09:07.104][DEBUG] [Sequence Thread] End time of next frame is at 10/13/2017 1:11:07 AM [10/13/17 01:09:07.104][DEBUG] [Sequence Thread] Target is still before end time, continuing... [10/13/17 01:09:07.104][DEBUG] [Sequence Thread] Running capture event... [10/13/17 01:09:07.214][DEBUG] [Sequence Thread] ------------- Starting capture frame for event[1] ------------- [10/13/17 01:09:07.220][DEBUG] [Sequence Thread] Sending commands... [10/13/17 01:09:07.220][DEBUG] [Sequence Thread] SetFlatBox: Frame Type is Light [10/13/17 01:09:07.220][DEBUG] [Sequence Thread] EventMarker 2 - t:NGC 253 (1); e:1; f:17; o: [10/13/17 01:09:07.220][DEBUG] [Sequence Thread] Checking if Meridian Flip is needed [10/13/17 01:09:07.221][DEBUG] [Sequence Thread] Telescope is on the West side of the mount [10/13/17 01:09:07.221][DEBUG] [Sequence Thread] Meridian Flip needed, Hour Angle >= Degrees Past To Flip: 2.99290185070597 >= 1.25 [10/13/17 01:09:07.221][DEBUG] [Sequence Thread] Running blocking meridian flip... [10/13/17 01:09:07.311][DEBUG] [Pier Flip Thread] Meridian Flip: Starting Meridian Flip Procedure [10/13/17 01:09:07.315][DEBUG] [Pier Flip Thread] Meridian Flip: Calling SGM_TELESCOPE_SOLVE - No Sync [10/13/17 01:09:07.398][DEBUG] [Pier Flip Thread] Meridian flip: Waiting for scope solve to complete... [10/13/17 01:09:07.408][DEBUG] [Telescope Thread] SGM_TELESCOPE_SOLVE message received... [10/13/17 01:09:07.408][DEBUG] [Telescope Thread] Telescope solve with plate solver PlateSolve2... [10/13/17 01:09:07.408][DEBUG] [Telescope Thread] Setting filter for scope sync... [10/13/17 01:09:07.408][DEBUG] [Telescope Thread] Setting filter position 1... [10/13/17 01:09:07.408][DEBUG] [Telescope Thread] Filter position 1 is already set. Skipping... [10/13/17 01:09:07.408][DEBUG] [Telescope Thread] Plate solving scope frame... [10/13/17 01:09:07.409][DEBUG] [Telescope Thread] Created full file name (file does not exist): C:\Users\WinAstro\AppData\Local\SequenceGenerator\Temp\plate_solve_image.fit [10/13/17 01:09:07.419][DEBUG] [Camera Thread] SGM_CAMERA_PLATE_SOLVER_CAPTURE message received... [10/13/17 01:09:07.420][DEBUG] [Camera Thread] Collecting FITs headers for plate solve frame... [10/13/17 01:09:07.420][DEBUG] [Camera Thread] Collecting FITs headers for plate solve frame... [10/13/17 01:09:07.490][DEBUG] [Camera Thread] SetAscomHighSpeed... [10/13/17 01:09:07.490][DEBUG] [Camera Thread] Cannot set readout speed, not supported by camera... [10/13/17 01:09:13.505][DEBUG] [Camera Thread] Created full file name (file does not exist): C:\Users\WinAstro\AppData\Local\SequenceGenerator\Temp\plate_solve_image.fit [10/13/17 01:09:13.505][DEBUG] [Camera Thread] SaveFileAscom: Start... [10/13/17 01:09:13.505][DEBUG] [Camera Thread] SaveFileAscom: Checking image data... [10/13/17 01:09:13.505][DEBUG] [Camera Thread] SaveFileAscom: Create normal preview bitmap... [10/13/17 01:09:13.510][DEBUG] [Camera Thread] SaveFileAscom: Locking preview bits... [10/13/17 01:09:13.510][DEBUG] [Camera Thread] SaveFileAscom: Validating file name... [10/13/17 01:09:13.510][DEBUG] [Camera Thread] SaveFileAscom: Starting byte traversal... [10/13/17 01:09:13.639][DEBUG] [Camera Thread] SaveFileAscom: Unlocking preview bits... [10/13/17 01:09:13.639][DEBUG] [Camera Thread] SaveFileAscom: Saving preview bitmap to disk... [10/13/17 01:09:13.639][DEBUG] [Camera Thread] SaveFileBmp16: Locking bitmap for disk write... [10/13/17 01:09:13.639][DEBUG] [Camera Thread] SaveFileBmp16: Opening file stream... [10/13/17 01:09:13.639][DEBUG] [Camera Thread] SaveFileBmp16: Writing FITS headers... [10/13/17 01:09:13.640][DEBUG] [Camera Thread] SaveFileBmp16: Traversing and persisting bitmap data... [10/13/17 01:09:13.735][DEBUG] [Camera Thread] SaveFileBmp16: FITS block fill... [10/13/17 01:09:13.735][DEBUG] [Camera Thread] SaveFileBmp16: Unlocking bitmap... [10/13/17 01:09:13.735][DEBUG] [Camera Thread] SaveFileBmp16: Closing file stream [10/13/17 01:09:13.742][DEBUG] [Camera Thread] Internal Interface: Set Preview... [10/13/17 01:09:13.742][DEBUG] [Camera Thread] Display image preview using asynch task... [10/13/17 01:09:14.159][DEBUG] [Camera Thread] SaveFileAscom: Done [10/13/17 01:09:14.159][DEBUG] [Camera Thread] =========== Save file took 661 ms [10/13/17 01:09:14.159][DEBUG] [Camera Thread] SGM_CAMERA_PLATE_SOLVER_CAPTURE complete... [10/13/17 01:09:14.280][DEBUG] [Telescope Thread] ************* SOLVE HINTS **************** [10/13/17 01:09:14.280][DEBUG] [Telescope Thread] SOLVER: PlateSolve2 [10/13/17 01:09:14.280][DEBUG] [Telescope Thread] BLIND: False [10/13/17 01:09:14.280][DEBUG] [Telescope Thread] METHOD: Max Regions [10/13/17 01:09:14.280][DEBUG] [Telescope Thread] RA: 0.702261902663114 [10/13/17 01:09:14.280][DEBUG] [Telescope Thread] DEC: -21.1837035616533 [10/13/17 01:09:14.280][DEBUG] [Telescope Thread] SCALE: 2.63044 [10/13/17 01:09:14.280][DEBUG] [Telescope Thread] ****************************************** [10/13/17 01:09:14.309][DEBUG] [Telescope Thread] FitsFileHeaderData: Angle - 0 [10/13/17 01:09:14.309][DEBUG] [Telescope Thread] FitsFileHeaderData: Scale - 0 [10/13/17 01:09:14.310][DEBUG] [Telescope Thread] FitsFileHeaderData: RA - 0.702261902663113 [10/13/17 01:09:14.310][DEBUG] [Telescope Thread] FitsFileHeaderData: DEC - -21.1837035616533 [10/13/17 01:09:14.320][DEBUG] [Telescope Thread] PlateSove2 Param: RA (RAD) - 0.183851736191869 [10/13/17 01:09:14.320][DEBUG] [Telescope Thread] PlateSove2 Param: DEC (RAD) - -0.369725374917299 [10/13/17 01:09:14.320][DEBUG] [Telescope Thread] PlateSove2 Param: Width - 2328 [10/13/17 01:09:14.320][DEBUG] [Telescope Thread] PlateSove2 Param: Height - 1760 [10/13/17 01:09:14.320][DEBUG] [Telescope Thread] PlateSolve2 Command Line: [10/13/17 01:09:14.320][DEBUG] [Telescope Thread] C:\Users\WinAstro\AppData\Local\SequenceGenerator\\PlateSolve2.exe 0.18385173619187,-0.36972537491730,0.02968836240858,0.02244481006834,3000,C:\Users\WinAstro\AppData\Local\SequenceGenerator\\Temp\psXSolve_14.fit [10/13/17 01:09:16.118][DEBUG] [PHD2 Listener Thread] Unknown object from PHD2: {"Event":"Alert","Timestamp":1507867756.087,"Host":"ASTROWIN","Inst":1,"Msg":"Your Max Dec Duration setting is preventing PHD from making adequate corrections to keep the guide star locked. Increase the Max Dec Duration setting to allow PHD2 to make the needed corrections.","Type":"warning"} [10/13/17 01:09:17.835][DEBUG] [Telescope Thread] *********** SUCCESSFUL SOLVE ************* [10/13/17 01:09:17.835][DEBUG] [Telescope Thread] SOLVER: False [10/13/17 01:09:17.835][DEBUG] [Telescope Thread] SUCCESS: True [10/13/17 01:09:17.835][DEBUG] [Telescope Thread] CONF: 100 [10/13/17 01:09:17.835][DEBUG] [Telescope Thread] BLIND: False [10/13/17 01:09:17.835][DEBUG] [Telescope Thread] RA: 0.701867416668562 [10/13/17 01:09:17.835][DEBUG] [Telescope Thread] DEC: -20.9638141102553 [10/13/17 01:09:17.835][DEBUG] [Telescope Thread] SCALE: 2.6297 [10/13/17 01:09:17.835][DEBUG] [Telescope Thread] FLIPPED: False [10/13/17 01:09:17.835][DEBUG] [Telescope Thread] ANGLE (EON): 83.24 [10/13/17 01:09:17.835][DEBUG] [Telescope Thread] MSG: Valid solve. [10/13/17 01:09:17.835][DEBUG] [Telescope Thread] ****************************************** [10/13/17 01:09:17.843][DEBUG] [Telescope Thread] Scope solve complete... [10/13/17 01:09:17.843][DEBUG] [Telescope Thread] SGM_TELESCOPE_SOLVE message complete... [10/13/17 01:09:17.870][DEBUG] [Pier Flip Thread] Meridian flip: Scope solve complete... [10/13/17 01:09:17.870][DEBUG] [Pier Flip Thread] Meridian Flip: Solve was Successful [10/13/17 01:09:17.870][DEBUG] [Pier Flip Thread] Meridian Flip: Stopping the Auto Guider [10/13/17 01:09:17.870][DEBUG] [Pier Flip Thread] Attempting to stop PHD2 guiding... [10/13/17 01:09:17.870][DEBUG] [Pier Flip Thread] Checking PHD2 state... [10/13/17 01:09:17.870][DEBUG] [Pier Flip Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding [10/13/17 01:09:17.870][DEBUG] [Pier Flip Thread] Sending to PHD2: {"method": "get_app_state", "id": 1001} [10/13/17 01:09:17.971][DEBUG] [Pier Flip Thread] PHD2 GetPhdStatus - Post-Wait: Guiding [10/13/17 01:09:17.971][DEBUG] [Pier Flip Thread] Sending to PHD2: {"method": "stop_capture", "id": 1004} [10/13/17 01:09:17.971][DEBUG] [Pier Flip Thread] Checking PHD2 state... [10/13/17 01:09:17.971][DEBUG] [Pier Flip Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding [10/13/17 01:09:17.971][DEBUG] [Pier Flip Thread] Sending to PHD2: {"method": "get_app_state", "id": 1001} [10/13/17 01:09:18.072][DEBUG] [Pier Flip Thread] PHD2 GetPhdStatus - Post-Wait: Guiding [10/13/17 01:09:19.072][DEBUG] [Pier Flip Thread] Checking PHD2 state... [10/13/17 01:09:19.072][DEBUG] [Pier Flip Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding [10/13/17 01:09:19.072][DEBUG] [Pier Flip Thread] Sending to PHD2: {"method": "get_app_state", "id": 1001} [10/13/17 01:09:19.173][DEBUG] [Pier Flip Thread] PHD2 GetPhdStatus - Post-Wait: Guiding [10/13/17 01:09:19.334][DEBUG] [PHD2 Listener Thread] PHD2: Settle done received: BAD [10/13/17 01:09:20.173][DEBUG] [Pier Flip Thread] Checking PHD2 state... [10/13/17 01:09:20.173][DEBUG] [Pier Flip Thread] PHD2 GetPhdStatus - Pre-Wait : Guiding [10/13/17 01:09:20.173][DEBUG] [Pier Flip Thread] Sending to PHD2: {"method": "get_app_state", "id": 1001} [10/13/17 01:09:20.274][DEBUG] [Pier Flip Thread] PHD2 GetPhdStatus - Post-Wait: Stopped [10/13/17 01:09:20.274][DEBUG] [Pier Flip Thread] PHD2: Successfully stopped PHD2... [10/13/17 01:09:20.274][DEBUG] [Pier Flip Thread] Meridian Flip: Sending Telescope command to execute meridian flip [10/13/17 01:09:20.286][DEBUG] [Telescope Thread] ASCOM Telescope: Pier side is West [10/13/17 01:09:20.286][DEBUG] [Telescope Thread] ASCOM Telescope: attempting pier flip using slew [10/13/17 01:09:20.431][DEBUG] [Telescope Thread] Telescope: Slewing to J2000 RA: 0.702853374944155 (00h42m10.27s) Dec: -21.1962101993477 (-21°11'46.36") [10/13/17 01:09:20.431][DEBUG] [Telescope Thread] Telescope: Slew received J2000 coordinates, mount requires JNOW, converting... [10/13/17 01:09:20.431][DEBUG] [Telescope Thread] Telescope: Slewing to JNOW RA: 0.717697620391846 Dec: -21.0989856719971 [10/13/17 01:09:21.862][DEBUG] [Main Thread] PopulateDataModel: Transferring view to the data model... [10/13/17 01:09:21.888][DEBUG] [MF Update Thread] Performing serialize... [10/13/17 01:09:52.645][DEBUG] [Main Thread] Meridian flip was user aborted... [10/13/17 01:09:52.886][DEBUG] [Pier Flip Thread] GlobalExceptionHandler caught : No se puede obtener acceso al objeto desechado. Nombre del objeto: 'ln'. [10/13/17 01:09:52.886][DEBUG] [Pier Flip Thread] Runtime terminating: True