G11 GT Mount will not park after sequence is complete

Description
Gemini 2 Losmandy G11 GT will not park at home position after sequence is complete. Telescope stops in last position after last exposure. I need the scope to park with the CWD and the dec turned so the scope is horizontal to clear the roll-off roof. I can park it in the home position using the ASCOM controller no problem. It will not park at all using any of the SGP commands. Tried using “set park” and “park” it does not work.
See included log:

[02/03/20 22:18:43.167][DEBUG][Sequence Thread][SQ;] ********* Run post sequence *********
[02/03/20 22:18:43.167][DEBUG][Sequence Thread][SQ;] SGPro capture cal frame mode is OFF…
[02/03/20 22:18:43.167][DEBUG][Sequence Thread][SQ;] Clearing timed monitoring events…
[02/03/20 22:18:43.167][DEBUG][Sequence Thread][SQ;] Checking RunEndOfSequenceEquipmentOptions, force = True
[02/03/20 22:18:43.167][DEBUG][Sequence Thread][SQ;] In RunEndOfSequenceEquipmentOptions
[02/03/20 22:19:14.492][DEBUG][Sequence Thread][SQ;] Stopping auto guiding…
[02/03/20 22:19:14.495][DEBUG][Sequence Thread][SQ;] Attempting to stop PHD2 guiding…
[02/03/20 22:19:14.495][DEBUG][Sequence Thread][SQ;] Checking PHD2 state…
[02/03/20 22:19:14.495][DEBUG][Sequence Thread][SQ;] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/03/20 22:19:14.495][DEBUG][Sequence Thread][SQ;] Sending to PHD2:
{“method”: “get_app_state”, “id”: 1001}

[02/03/20 22:19:14.596][DEBUG][Sequence Thread][SQ;] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/03/20 22:19:14.596][DEBUG][Sequence Thread][SQ;] Sending to PHD2:
{“method”: “stop_capture”, “id”: 1004}

[02/03/20 22:19:14.596][DEBUG][Sequence Thread][SQ;] Checking PHD2 state…
[02/03/20 22:19:14.596][DEBUG][Sequence Thread][SQ;] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/03/20 22:19:14.596][DEBUG][Sequence Thread][SQ;] Sending to PHD2:
{“method”: “get_app_state”, “id”: 1001}

[02/03/20 22:19:14.697][DEBUG][Sequence Thread][SQ;] PHD2 GetPhdStatus - Post-Wait: Guiding
[02/03/20 22:19:15.697][DEBUG][Sequence Thread][SQ;] Checking PHD2 state…
[02/03/20 22:19:15.697][DEBUG][Sequence Thread][SQ;] PHD2 GetPhdStatus - Pre-Wait : Guiding
[02/03/20 22:19:15.697][DEBUG][Sequence Thread][SQ;] Sending to PHD2:
{“method”: “get_app_state”, “id”: 1001}

[02/03/20 22:19:15.798][DEBUG][Sequence Thread][SQ;] PHD2 GetPhdStatus - Post-Wait: Stopped
[02/03/20 22:19:15.798][DEBUG][Sequence Thread][SQ;] PHD2: Successfully stopped PHD2…
[02/03/20 22:19:15.798][DEBUG][Sequence Thread][SQ;] Autoguider (PHD2) stopped Successfully
[02/03/20 22:19:15.798][DEBUG][Sequence Thread][SQ;] Waiting for Autoguider to stop…
[02/03/20 22:19:15.798][DEBUG][Sequence Thread][SQ;] Checking PHD2 state…
[02/03/20 22:19:15.798][DEBUG][Sequence Thread][SQ;] PHD2 GetPhdStatus - Pre-Wait : Stopped
[02/03/20 22:19:15.798][DEBUG][Sequence Thread][SQ;] Sending to PHD2:
{“method”: “get_app_state”, “id”: 1001}

[02/03/20 22:19:15.899][DEBUG][Sequence Thread][SQ;] PHD2 GetPhdStatus - Post-Wait: Stopped
[02/03/20 22:19:15.899][DEBUG][Main Thread][SQ;] Adding sequence level notification: Auto guider has been stopped successfully.
[02/03/20 22:19:15.904][DEBUG][Sequence Thread][SQ;] Sending Notification: Status - Auto guider has been stopped successfully.
[02/03/20 22:19:15.913][DEBUG][Sequence Thread][SQ;] Parking telescope…
[02/03/20 22:19:15.934][DEBUG][Main Thread][SQ;] Adding sequence level notification: Parking the mount…
[02/03/20 22:19:15.939][DEBUG][Sequence Thread][SQ;] Sending Notification: Status - Parking the mount…
[02/03/20 22:19:15.944][DEBUG][Main Thread][SQ;] Adding sequence level notification: Mount is parking.
[02/03/20 22:19:15.946][DEBUG][Telescope Thread][SQ;] SGM_TELESCOPE_PARK message received…
[02/03/20 22:19:15.947][DEBUG][Telescope Thread][SQ;PK;] ASCOM Telescope: Park message received.
[02/03/20 22:19:15.948][DEBUG][Sequence Thread][SQ;PK;] Sending Notification: StatusParkScope - Mount is parking.
[02/03/20 22:19:15.960][DEBUG][Telescope Thread][SQ;PK;] ASCOM Telescope: Sending park…
[02/03/20 22:19:15.968][DEBUG][Main Thread][SQ;PK;] Aborting sequence timer thread…
[02/03/20 22:19:15.968][DEBUG][Main Thread][SQ;PK;] Sending sequence end notification…
[02/03/20 22:19:15.968][DEBUG][Main Thread][SQ;PK;] Adding sequence level notification: Sequence has ended
[02/03/20 22:19:15.973][DEBUG][Main Thread][SQ;PK;] Sending Notification: Status - Sequence has ended
[02/03/20 22:19:15.973][DEBUG][Main Thread][SQ;PK;] Resetting UI elements…
[02/03/20 22:19:15.973][DEBUG][Main Thread][SQ;PK;] Checking if sequence has work left…
[02/03/20 22:19:15.973][DEBUG][Main Thread][SQ;PK;] No work left…
[02/03/20 22:19:15.973][DEBUG][Main Thread][SQ;PK;] Updating big status…
[02/03/20 22:19:15.973][DEBUG][Main Thread][SQ;PK;] Enabling menu items…
[02/03/20 22:19:16.072][DEBUG][Main Thread][SQ;PK;] Set target icons…
[02/03/20 22:19:16.089][DEBUG][Main Thread][SQ;PK;] Removing camera protection…
[02/03/20 22:19:16.202][DEBUG][Main Thread][SQ;PK;] Monitoring system shutdown…
[02/03/20 22:19:16.202][DEBUG][Main Thread][SQ;PK;] SequenceEnds complete…
[02/03/20 22:19:16.202][DEBUG][Sequence Thread][SQ;PK;] Restoring system standby state…
[02/03/20 22:22:52.469][DEBUG][Telescope Thread][PK;] ASCOM Telescope: Parked
[02/03/20 22:22:52.470][DEBUG][Telescope Thread][PK;] Attempting to stop PHD2 guiding…
[02/03/20 22:22:52.470][DEBUG][Telescope Thread][PK;] Checking PHD2 state…
[02/03/20 22:22:52.470][DEBUG][Telescope Thread][PK;] PHD2 GetPhdStatus - Pre-Wait : Stopped
[02/03/20 22:22:52.470][DEBUG][Telescope Thread][PK;] Sending to PHD2:
{“method”: “get_app_state”, “id”: 1001}

[02/03/20 22:22:52.571][DEBUG][Telescope Thread][PK;] PHD2 GetPhdStatus - Post-Wait: Stopped
[02/03/20 22:22:52.571][DEBUG][Telescope Thread][PK;] PHD2 Guider is already stopped.
[02/03/20 22:22:52.571][DEBUG][Telescope Thread][PK;] Autoguider (PHD2) stopped Successfully
[02/03/20 22:22:52.571][DEBUG][Telescope Thread][NONE] SGM_TELESCOPE_PARK message complete…
[02/03/20 22:22:52.571][DEBUG][Telescope Thread][NONE] SGM_TELESCOPE_PARK message received…
[02/03/20 22:22:52.571][DEBUG][Telescope Thread][PK;] ASCOM Telescope: Park message received.
[02/03/20 22:22:52.583][DEBUG][Telescope Thread][PK;] ASCOM Telescope: Parked
[02/03/20 22:22:52.583][DEBUG][Telescope Thread][PK;] Attempting to stop PHD2 guiding…
[02/03/20 22:22:52.583][DEBUG][Telescope Thread][PK;] Checking PHD2 state…
[02/03/20 22:22:52.583][DEBUG][Telescope Thread][PK;] PHD2 GetPhdStatus - Pre-Wait : Stopped
[02/03/20 22:22:52.583][DEBUG][Telescope Thread][PK;] Sending to PHD2:
{“method”: “get_app_state”, “id”: 1001}

[02/03/20 22:22:52.684][DEBUG][Telescope Thread][PK;] PHD2 GetPhdStatus - Post-Wait: Stopped
[02/03/20 22:22:52.684][DEBUG][Telescope Thread][PK;] PHD2 Guider is already stopped.
[02/03/20 22:22:52.684][DEBUG][Telescope Thread][PK;] Autoguider (PHD2) stopped Successfully
[02/03/20 22:22:52.684][DEBUG][Telescope Thread][NONE] SGM_TELESCOPE_PARK message complete…
[02/03/20 22:22:52.684][DEBUG][Telescope Thread][NONE] Telescope thread is IDLE…
[02/03/20 22:23:13.471][DEBUG][Main Thread][NONE] ASCOM Telescope: Set park message received.
[02/03/20 22:25:27.597][DEBUG][Main Thread][NONE] ASCOM Telescope: Unpark message received.
[02/03/20 22:25:27.619][DEBUG][Main Thread][NONE] ASCOM Telescope: Start tracking
[02/03/20 22:26:38.575][DEBUG][Equipment Connectivity Thread][NONE] SGPro thinks the telescope is connected, but it’s not, syncing UI…
[02/03/20 22:26:38.578][DEBUG][Main Thread][NONE] Adding sequence level notification: External disconnect of telescope detected…
[02/03/20 22:26:38.633][DEBUG][Equipment Connectivity Thread][NONE] Sending Notification: Warning - External disconnect of telescope detected…
[02/03/20 22:26:38.638][DEBUG][Main Thread][NONE] Disconnecting ASCOM Telescope: ASCOM.GeminiTelescope.Telescope

Useful Info

OS: Microsoft Windows 10 Pro
Ver: 3.1.0.449
.NET: 4.8

Try this post. I couldn’t get my G11 to park with SGP. The user jeziha posted this and it definitely works

SGP G11 Park

My guess this will allow SGP to properly park your mount in the CWD position. Hope this helps.

Thanks for your help

I got hit with a ransomware attack that took out my companies network on Monday. After I get that sorted out I can get back to telescope stuff.

PS. This is being sent from an off-network machine that is clean.

Closing due to inactivity. If this is still an issue, please send the requested information and “uncheck” this thread as solved.

Thanks!