Time to pier flip showing NA

Sequence Generator
1

Hi All,

I was quite happy with the merdian flips happening all by itself but since i upgraded to the latest version (3.0.3.169), my flips have stopped working.

When i’m looking at SGP, the “Time top pier flip” option is showing NA.

My settings are as below (both SGP and EQMOD). Please advise.

Thanks in advance
flip1 flip2

flip3
flip3.JPG1193×494 113 KB

2

Had to manually flip. Also unchecked Meridian Limits in EQMOD. Now the meridian flip time is showing. What could this be?
flip4

3

NA usually means it will not need to flip by the time morning comes :slight_smile:

4

I get that but as you can see from the above screenshot my target was going to go past meridian after 56 min and which it did so it did require a flip :slight_smile:

5

Are your Latitude/Longitude coordinates setup correctly in EQMOD?

6

I’m using the Simulator and it’s working fine - see if it reports correctly for you.

Also you’re quite a few versions behind in EQMOD, maybe try an update? I am using 2.00q with no issues!

7

EQMOD can be a little quirky to get setup correctly so that it works well with SGP. In the document we recommend an older version of EQMOD but 2.00q seems to work well so you can use that, just follow the rest of the recommendations:

http://mainsequencesoftware.com/Content/SGPHelp/UsingEQMODwithSGPro.html

Thanks,
Jared